android_kernel_xiaomi_sm8350/arch/um/os-Linux/skas/process.c
Jeff Dike ee3d9bd4de uml: simplify SIGSEGV handling
Simplify the page fault stub by not masking signals while it is running.  This
allows it to signal that it is done by executing an instruction which will
generate a SIGTRAP (int3 on x86) rather than running sigreturn by hand after
queueing a blocked SIGUSR1.

userspace_tramp now no longer puts anything in the SIGSEGV sa_mask, but it
does add SA_NODEFER to sa_flags so that SIGSEGV is still enabled after the
signal handler fails to run sigreturn.

SIGWINCH is just blocked so that we don't have to deal with it and the signal
masks used by wait_stub_done are updated to reflect the smaller number of
signals that it has to worry about.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:28 -08:00

621 lines
16 KiB
C

/*
* Copyright (C) 2002- 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include <stdlib.h>
#include <unistd.h>
#include <sched.h>
#include <errno.h>
#include <string.h>
#include <sys/mman.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <asm/unistd.h>
#include "as-layout.h"
#include "chan_user.h"
#include "kern_constants.h"
#include "kern_util.h"
#include "mem.h"
#include "os.h"
#include "process.h"
#include "proc_mm.h"
#include "ptrace_user.h"
#include "registers.h"
#include "skas.h"
#include "skas_ptrace.h"
#include "user.h"
#include "sysdep/stub.h"
int is_skas_winch(int pid, int fd, void *data)
{
if (pid != getpgrp())
return 0;
register_winch_irq(-1, fd, -1, data, 0);
return 1;
}
static int ptrace_dump_regs(int pid)
{
unsigned long regs[MAX_REG_NR];
int i;
if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
return -errno;
printk(UM_KERN_ERR "Stub registers -\n");
for (i = 0; i < ARRAY_SIZE(regs); i++)
printk(UM_KERN_ERR "\t%d - %lx\n", i, regs[i]);
return 0;
}
/*
* Signals that are OK to receive in the stub - we'll just continue it.
* SIGWINCH will happen when UML is inside a detached screen.
*/
#define STUB_SIG_MASK (1 << SIGVTALRM)
/* Signals that the stub will finish with - anything else is an error */
#define STUB_DONE_MASK (1 << SIGTRAP)
void wait_stub_done(int pid)
{
int n, status, err;
while (1) {
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
if ((n < 0) || !WIFSTOPPED(status))
goto bad_wait;
if (((1 << WSTOPSIG(status)) & STUB_SIG_MASK) == 0)
break;
err = ptrace(PTRACE_CONT, pid, 0, 0);
if (err)
panic("wait_stub_done : continue failed, errno = %d\n",
errno);
}
if (((1 << WSTOPSIG(status)) & STUB_DONE_MASK) != 0)
return;
bad_wait:
err = ptrace_dump_regs(pid);
if (err)
printk(UM_KERN_ERR "Failed to get registers from stub, "
"errno = %d\n", -err);
panic("wait_stub_done : failed to wait for SIGUSR1/SIGTRAP, pid = %d, "
"n = %d, errno = %d, status = 0x%x\n", pid, n, errno, status);
}
extern unsigned long current_stub_stack(void);
void get_skas_faultinfo(int pid, struct faultinfo * fi)
{
int err;
if (ptrace_faultinfo) {
err = ptrace(PTRACE_FAULTINFO, pid, 0, fi);
if (err)
panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, "
"errno = %d\n", errno);
/* Special handling for i386, which has different structs */
if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo))
memset((char *)fi + sizeof(struct ptrace_faultinfo), 0,
sizeof(struct faultinfo) -
sizeof(struct ptrace_faultinfo));
}
else {
err = ptrace(PTRACE_CONT, pid, 0, SIGSEGV);
if (err)
panic("Failed to continue stub, pid = %d, errno = %d\n",
pid, errno);
wait_stub_done(pid);
/*
* faultinfo is prepared by the stub-segv-handler at start of
* the stub stack page. We just have to copy it.
*/
memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
}
}
static void handle_segv(int pid, struct uml_pt_regs * regs)
{
get_skas_faultinfo(pid, &regs->faultinfo);
segv(regs->faultinfo, 0, 1, NULL);
}
/*
* To use the same value of using_sysemu as the caller, ask it that value
* (in local_using_sysemu
*/
static void handle_trap(int pid, struct uml_pt_regs *regs,
int local_using_sysemu)
{
int err, status;
/* Mark this as a syscall */
UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->gp);
if (!local_using_sysemu)
{
err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
__NR_getpid);
if (err < 0)
panic("handle_trap - nullifying syscall failed, "
"errno = %d\n", errno);
err = ptrace(PTRACE_SYSCALL, pid, 0, 0);
if (err < 0)
panic("handle_trap - continuing to end of syscall "
"failed, errno = %d\n", errno);
CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL));
if ((err < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGTRAP + 0x80)) {
err = ptrace_dump_regs(pid);
if (err)
printk(UM_KERN_ERR "Failed to get registers "
"from process, errno = %d\n", -err);
panic("handle_trap - failed to wait at end of syscall, "
"errno = %d, status = %d\n", errno, status);
}
}
handle_syscall(regs);
}
extern int __syscall_stub_start;
static int userspace_tramp(void *stack)
{
void *addr;
int err;
ptrace(PTRACE_TRACEME, 0, 0, 0);
signal(SIGTERM, SIG_DFL);
signal(SIGWINCH, SIG_IGN);
err = set_interval();
if (err)
panic("userspace_tramp - setting timer failed, errno = %d\n",
err);
if (!proc_mm) {
/*
* This has a pte, but it can't be mapped in with the usual
* tlb_flush mechanism because this is part of that mechanism
*/
int fd;
unsigned long long offset;
fd = phys_mapping(to_phys(&__syscall_stub_start), &offset);
addr = mmap64((void *) STUB_CODE, UM_KERN_PAGE_SIZE,
PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset);
if (addr == MAP_FAILED) {
printk(UM_KERN_ERR "mapping mmap stub at 0x%lx failed, "
"errno = %d\n", STUB_CODE, errno);
exit(1);
}
if (stack != NULL) {
fd = phys_mapping(to_phys(stack), &offset);
addr = mmap((void *) STUB_DATA,
UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
MAP_FIXED | MAP_SHARED, fd, offset);
if (addr == MAP_FAILED) {
printk(UM_KERN_ERR "mapping segfault stack "
"at 0x%lx failed, errno = %d\n",
STUB_DATA, errno);
exit(1);
}
}
}
if (!ptrace_faultinfo && (stack != NULL)) {
struct sigaction sa;
unsigned long v = STUB_CODE +
(unsigned long) stub_segv_handler -
(unsigned long) &__syscall_stub_start;
set_sigstack((void *) STUB_DATA, UM_KERN_PAGE_SIZE);
sigemptyset(&sa.sa_mask);
sa.sa_flags = SA_ONSTACK | SA_NODEFER;
sa.sa_handler = (void *) v;
sa.sa_restorer = NULL;
if (sigaction(SIGSEGV, &sa, NULL) < 0)
panic("userspace_tramp - setting SIGSEGV handler "
"failed - errno = %d\n", errno);
}
kill(os_getpid(), SIGSTOP);
return 0;
}
/* Each element set once, and only accessed by a single processor anyway */
#undef NR_CPUS
#define NR_CPUS 1
int userspace_pid[NR_CPUS];
int start_userspace(unsigned long stub_stack)
{
void *stack;
unsigned long sp;
int pid, status, n, flags;
stack = mmap(NULL, UM_KERN_PAGE_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (stack == MAP_FAILED)
panic("start_userspace : mmap failed, errno = %d", errno);
sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *);
flags = CLONE_FILES;
if (proc_mm)
flags |= CLONE_VM;
else
flags |= SIGCHLD;
pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
if (pid < 0)
panic("start_userspace : clone failed, errno = %d", errno);
do {
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
if (n < 0)
panic("start_userspace : wait failed, errno = %d",
errno);
} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
panic("start_userspace : expected SIGSTOP, got status = %d",
status);
if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
(void *) PTRACE_O_TRACESYSGOOD) < 0)
panic("start_userspace : PTRACE_OLDSETOPTIONS failed, "
"errno = %d\n", errno);
if (munmap(stack, UM_KERN_PAGE_SIZE) < 0)
panic("start_userspace : munmap failed, errno = %d\n", errno);
return pid;
}
void userspace(struct uml_pt_regs *regs)
{
struct itimerval timer;
unsigned long long nsecs, now;
int err, status, op, pid = userspace_pid[0];
/* To prevent races if using_sysemu changes under us.*/
int local_using_sysemu;
if (getitimer(ITIMER_VIRTUAL, &timer))
printk("Failed to get itimer, errno = %d\n", errno);
nsecs = timer.it_value.tv_sec * UM_NSEC_PER_SEC +
timer.it_value.tv_usec * UM_NSEC_PER_USEC;
nsecs += os_nsecs();
while (1) {
restore_registers(pid, regs);
/* Now we set local_using_sysemu to be used for one loop */
local_using_sysemu = get_using_sysemu();
op = SELECT_PTRACE_OPERATION(local_using_sysemu,
singlestepping(NULL));
err = ptrace(op, pid, 0, 0);
if (err)
panic("userspace - could not resume userspace process, "
"pid=%d, ptrace operation = %d, errno = %d\n",
pid, op, errno);
CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL));
if (err < 0)
panic("userspace - waitpid failed, errno = %d\n",
errno);
regs->is_user = 1;
save_registers(pid, regs);
UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
if (WIFSTOPPED(status)) {
int sig = WSTOPSIG(status);
switch(sig) {
case SIGSEGV:
if (PTRACE_FULL_FAULTINFO ||
!ptrace_faultinfo) {
get_skas_faultinfo(pid,
&regs->faultinfo);
(*sig_info[SIGSEGV])(SIGSEGV, regs);
}
else handle_segv(pid, regs);
break;
case SIGTRAP + 0x80:
handle_trap(pid, regs, local_using_sysemu);
break;
case SIGTRAP:
relay_signal(SIGTRAP, regs);
break;
case SIGVTALRM:
now = os_nsecs();
if(now < nsecs)
break;
block_signals();
(*sig_info[sig])(sig, regs);
unblock_signals();
nsecs = timer.it_value.tv_sec *
UM_NSEC_PER_SEC +
timer.it_value.tv_usec *
UM_NSEC_PER_USEC;
nsecs += os_nsecs();
break;
case SIGIO:
case SIGILL:
case SIGBUS:
case SIGFPE:
case SIGWINCH:
block_signals();
(*sig_info[sig])(sig, regs);
unblock_signals();
break;
default:
printk(UM_KERN_ERR "userspace - child stopped "
"with signal %d\n", sig);
}
pid = userspace_pid[0];
interrupt_end();
/* Avoid -ERESTARTSYS handling in host */
if (PT_SYSCALL_NR_OFFSET != PT_SYSCALL_RET_OFFSET)
PT_SYSCALL_NR(regs->gp) = -1;
}
}
}
static unsigned long thread_regs[MAX_REG_NR];
static int __init init_thread_regs(void)
{
get_safe_registers(thread_regs);
/* Set parent's instruction pointer to start of clone-stub */
thread_regs[REGS_IP_INDEX] = STUB_CODE +
(unsigned long) stub_clone_handler -
(unsigned long) &__syscall_stub_start;
thread_regs[REGS_SP_INDEX] = STUB_DATA + UM_KERN_PAGE_SIZE -
sizeof(void *);
#ifdef __SIGNAL_FRAMESIZE
thread_regs[REGS_SP_INDEX] -= __SIGNAL_FRAMESIZE;
#endif
return 0;
}
__initcall(init_thread_regs);
int copy_context_skas0(unsigned long new_stack, int pid)
{
struct timeval tv = { .tv_sec = 0, .tv_usec = UM_USEC_PER_SEC / UM_HZ };
int err;
unsigned long current_stack = current_stub_stack();
struct stub_data *data = (struct stub_data *) current_stack;
struct stub_data *child_data = (struct stub_data *) new_stack;
unsigned long long new_offset;
int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset);
/*
* prepare offset and fd of child's stack as argument for parent's
* and child's mmap2 calls
*/
*data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset),
.fd = new_fd,
.timer = ((struct itimerval)
{ .it_value = tv,
.it_interval = tv }) });
err = ptrace_setregs(pid, thread_regs);
if (err < 0)
panic("copy_context_skas0 : PTRACE_SETREGS failed, "
"pid = %d, errno = %d\n", pid, -err);
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
/*
* Wait, until parent has finished its work: read child's pid from
* parent's stack, and check, if bad result.
*/
err = ptrace(PTRACE_CONT, pid, 0, 0);
if (err)
panic("Failed to continue new process, pid = %d, "
"errno = %d\n", pid, errno);
wait_stub_done(pid);
pid = data->err;
if (pid < 0)
panic("copy_context_skas0 - stub-parent reports error %d\n",
-pid);
/*
* Wait, until child has finished too: read child's result from
* child's stack and check it.
*/
wait_stub_done(pid);
if (child_data->err != STUB_DATA)
panic("copy_context_skas0 - stub-child reports error %ld\n",
child_data->err);
if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
(void *)PTRACE_O_TRACESYSGOOD) < 0)
panic("copy_context_skas0 : PTRACE_OLDSETOPTIONS failed, "
"errno = %d\n", errno);
return pid;
}
/*
* This is used only, if stub pages are needed, while proc_mm is
* available. Opening /proc/mm creates a new mm_context, which lacks
* the stub-pages. Thus, we map them using /proc/mm-fd
*/
void map_stub_pages(int fd, unsigned long code,
unsigned long data, unsigned long stack)
{
struct proc_mm_op mmop;
int n;
unsigned long long code_offset;
int code_fd = phys_mapping(to_phys((void *) &__syscall_stub_start),
&code_offset);
mmop = ((struct proc_mm_op) { .op = MM_MMAP,
.u =
{ .mmap =
{ .addr = code,
.len = UM_KERN_PAGE_SIZE,
.prot = PROT_EXEC,
.flags = MAP_FIXED | MAP_PRIVATE,
.fd = code_fd,
.offset = code_offset
} } });
CATCH_EINTR(n = write(fd, &mmop, sizeof(mmop)));
if (n != sizeof(mmop)) {
n = errno;
printk(UM_KERN_ERR "mmap args - addr = 0x%lx, fd = %d, "
"offset = %llx\n", code, code_fd,
(unsigned long long) code_offset);
panic("map_stub_pages : /proc/mm map for code failed, "
"err = %d\n", n);
}
if (stack) {
unsigned long long map_offset;
int map_fd = phys_mapping(to_phys((void *)stack), &map_offset);
mmop = ((struct proc_mm_op)
{ .op = MM_MMAP,
.u =
{ .mmap =
{ .addr = data,
.len = UM_KERN_PAGE_SIZE,
.prot = PROT_READ | PROT_WRITE,
.flags = MAP_FIXED | MAP_SHARED,
.fd = map_fd,
.offset = map_offset
} } });
CATCH_EINTR(n = write(fd, &mmop, sizeof(mmop)));
if (n != sizeof(mmop))
panic("map_stub_pages : /proc/mm map for data failed, "
"err = %d\n", errno);
}
}
void new_thread(void *stack, jmp_buf *buf, void (*handler)(void))
{
(*buf)[0].JB_IP = (unsigned long) handler;
(*buf)[0].JB_SP = (unsigned long) stack + UM_THREAD_SIZE -
sizeof(void *);
}
#define INIT_JMP_NEW_THREAD 0
#define INIT_JMP_CALLBACK 1
#define INIT_JMP_HALT 2
#define INIT_JMP_REBOOT 3
void switch_threads(jmp_buf *me, jmp_buf *you)
{
if (UML_SETJMP(me) == 0)
UML_LONGJMP(you, 1);
}
static jmp_buf initial_jmpbuf;
/* XXX Make these percpu */
static void (*cb_proc)(void *arg);
static void *cb_arg;
static jmp_buf *cb_back;
int start_idle_thread(void *stack, jmp_buf *switch_buf)
{
int n;
set_handler(SIGWINCH, (__sighandler_t) sig_handler,
SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGVTALRM, -1);
/*
* Can't use UML_SETJMP or UML_LONGJMP here because they save
* and restore signals, with the possible side-effect of
* trying to handle any signals which came when they were
* blocked, which can't be done on this stack.
* Signals must be blocked when jumping back here and restored
* after returning to the jumper.
*/
n = setjmp(initial_jmpbuf);
switch(n) {
case INIT_JMP_NEW_THREAD:
(*switch_buf)[0].JB_IP = (unsigned long) new_thread_handler;
(*switch_buf)[0].JB_SP = (unsigned long) stack +
UM_THREAD_SIZE - sizeof(void *);
break;
case INIT_JMP_CALLBACK:
(*cb_proc)(cb_arg);
longjmp(*cb_back, 1);
break;
case INIT_JMP_HALT:
kmalloc_ok = 0;
return 0;
case INIT_JMP_REBOOT:
kmalloc_ok = 0;
return 1;
default:
panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
}
longjmp(*switch_buf, 1);
}
void initial_thread_cb_skas(void (*proc)(void *), void *arg)
{
jmp_buf here;
cb_proc = proc;
cb_arg = arg;
cb_back = &here;
block_signals();
if (UML_SETJMP(&here) == 0)
UML_LONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK);
unblock_signals();
cb_proc = NULL;
cb_arg = NULL;
cb_back = NULL;
}
void halt_skas(void)
{
block_signals();
UML_LONGJMP(&initial_jmpbuf, INIT_JMP_HALT);
}
void reboot_skas(void)
{
block_signals();
UML_LONGJMP(&initial_jmpbuf, INIT_JMP_REBOOT);
}
void __switch_mm(struct mm_id *mm_idp)
{
int err;
/* FIXME: need cpu pid in __switch_mm */
if (proc_mm) {
err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0,
mm_idp->u.mm_fd);
if (err)
panic("__switch_mm - PTRACE_SWITCH_MM failed, "
"errno = %d\n", errno);
}
else userspace_pid[0] = mm_idp->u.pid;
}