android_kernel_xiaomi_sm8350/drivers/gpio/cs5535-gpio.c
Ben Gardner a8a5164c29 gpio: cs5535-gpio: fix input direction
The cs5535-gpio driver's get() function was returning the output value.
This means that the GPIO pins would never work as an input, even if
configured as an input.

The driver should return the READ_BACK value, which is the sensed line
value.  To make that work when the direction is 'output', INPUT_ENABLE
needs to be set.

In addition, the driver was not disabling OUTPUT_ENABLE when the direction
is set to 'input'.  That would cause the GPIO to continue to drive the pin
if the direction was ever set to output.

This issue was noticed when attempting to use the gpiolib driver to read
an external input.  I had previously been using the char/cs5535-gpio
driver.

Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: <stable@kernel.org>		[2.6.33.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:48 -08:00

358 lines
8.9 KiB
C

/*
* AMD CS5535/CS5536 GPIO driver
* Copyright (C) 2006 Advanced Micro Devices, Inc.
* Copyright (C) 2007-2009 Andres Salomon <dilinger@collabora.co.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/cs5535.h>
#define DRV_NAME "cs5535-gpio"
#define GPIO_BAR 1
/*
* Some GPIO pins
* 31-29,23 : reserved (always mask out)
* 28 : Power Button
* 26 : PME#
* 22-16 : LPC
* 14,15 : SMBus
* 9,8 : UART1
* 7 : PCI INTB
* 3,4 : UART2/DDC
* 2 : IDE_IRQ0
* 1 : AC_BEEP
* 0 : PCI INTA
*
* If a mask was not specified, allow all except
* reserved and Power Button
*/
#define GPIO_DEFAULT_MASK 0x0F7FFFFF
static ulong mask = GPIO_DEFAULT_MASK;
module_param_named(mask, mask, ulong, 0444);
MODULE_PARM_DESC(mask, "GPIO channel mask.");
static struct cs5535_gpio_chip {
struct gpio_chip chip;
resource_size_t base;
struct pci_dev *pdev;
spinlock_t lock;
} cs5535_gpio_chip;
/*
* The CS5535/CS5536 GPIOs support a number of extra features not defined
* by the gpio_chip API, so these are exported. For a full list of the
* registers, see include/linux/cs5535.h.
*/
static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
if (offset < 16)
/* low bank register */
outl(1 << offset, chip->base + reg);
else
/* high bank register */
outl(1 << (offset - 16), chip->base + 0x80 + reg);
}
void cs5535_gpio_set(unsigned offset, unsigned int reg)
{
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_set(chip, offset, reg);
spin_unlock_irqrestore(&chip->lock, flags);
}
EXPORT_SYMBOL_GPL(cs5535_gpio_set);
static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
if (offset < 16)
/* low bank register */
outl(1 << (offset + 16), chip->base + reg);
else
/* high bank register */
outl(1 << offset, chip->base + 0x80 + reg);
}
void cs5535_gpio_clear(unsigned offset, unsigned int reg)
{
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_clear(chip, offset, reg);
spin_unlock_irqrestore(&chip->lock, flags);
}
EXPORT_SYMBOL_GPL(cs5535_gpio_clear);
int cs5535_gpio_isset(unsigned offset, unsigned int reg)
{
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
unsigned long flags;
long val;
spin_lock_irqsave(&chip->lock, flags);
if (offset < 16)
/* low bank register */
val = inl(chip->base + reg);
else {
/* high bank register */
val = inl(chip->base + 0x80 + reg);
offset -= 16;
}
spin_unlock_irqrestore(&chip->lock, flags);
return (val & (1 << offset)) ? 1 : 0;
}
EXPORT_SYMBOL_GPL(cs5535_gpio_isset);
/*
* Generic gpio_chip API support.
*/
static int chip_gpio_request(struct gpio_chip *c, unsigned offset)
{
struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
/* check if this pin is available */
if ((mask & (1 << offset)) == 0) {
dev_info(&chip->pdev->dev,
"pin %u is not available (check mask)\n", offset);
spin_unlock_irqrestore(&chip->lock, flags);
return -EINVAL;
}
/* disable output aux 1 & 2 on this pin */
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX1);
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX2);
/* disable input aux 1 on this pin */
__cs5535_gpio_clear(chip, offset, GPIO_INPUT_AUX1);
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
}
static int chip_gpio_get(struct gpio_chip *chip, unsigned offset)
{
return cs5535_gpio_isset(offset, GPIO_READ_BACK);
}
static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
if (val)
cs5535_gpio_set(offset, GPIO_OUTPUT_VAL);
else
cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL);
}
static int chip_direction_input(struct gpio_chip *c, unsigned offset)
{
struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_ENABLE);
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
}
static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val)
{
struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE);
if (val)
__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL);
else
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL);
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
}
static char *cs5535_gpio_names[] = {
"GPIO0", "GPIO1", "GPIO2", "GPIO3",
"GPIO4", "GPIO5", "GPIO6", "GPIO7",
"GPIO8", "GPIO9", "GPIO10", "GPIO11",
"GPIO12", "GPIO13", "GPIO14", "GPIO15",
"GPIO16", "GPIO17", "GPIO18", "GPIO19",
"GPIO20", "GPIO21", "GPIO22", NULL,
"GPIO24", "GPIO25", "GPIO26", "GPIO27",
"GPIO28", NULL, NULL, NULL,
};
static struct cs5535_gpio_chip cs5535_gpio_chip = {
.chip = {
.owner = THIS_MODULE,
.label = DRV_NAME,
.base = 0,
.ngpio = 32,
.names = cs5535_gpio_names,
.request = chip_gpio_request,
.get = chip_gpio_get,
.set = chip_gpio_set,
.direction_input = chip_direction_input,
.direction_output = chip_direction_output,
},
};
static int __init cs5535_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
int err;
ulong mask_orig = mask;
/* There are two ways to get the GPIO base address; one is by
* fetching it from MSR_LBAR_GPIO, the other is by reading the
* PCI BAR info. The latter method is easier (especially across
* different architectures), so we'll stick with that for now. If
* it turns out to be unreliable in the face of crappy BIOSes, we
* can always go back to using MSRs.. */
err = pci_enable_device_io(pdev);
if (err) {
dev_err(&pdev->dev, "can't enable device IO\n");
goto done;
}
err = pci_request_region(pdev, GPIO_BAR, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
goto done;
}
/* set up the driver-specific struct */
cs5535_gpio_chip.base = pci_resource_start(pdev, GPIO_BAR);
cs5535_gpio_chip.pdev = pdev;
spin_lock_init(&cs5535_gpio_chip.lock);
dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR,
(unsigned long long) cs5535_gpio_chip.base);
/* mask out reserved pins */
mask &= 0x1F7FFFFF;
/* do not allow pin 28, Power Button, as there's special handling
* in the PMC needed. (note 12, p. 48) */
mask &= ~(1 << 28);
if (mask_orig != mask)
dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n",
mask_orig, mask);
/* finally, register with the generic GPIO API */
err = gpiochip_add(&cs5535_gpio_chip.chip);
if (err)
goto release_region;
dev_info(&pdev->dev, DRV_NAME ": GPIO support successfully loaded.\n");
return 0;
release_region:
pci_release_region(pdev, GPIO_BAR);
done:
return err;
}
static void __exit cs5535_gpio_remove(struct pci_dev *pdev)
{
int err;
err = gpiochip_remove(&cs5535_gpio_chip.chip);
if (err) {
/* uhh? */
dev_err(&pdev->dev, "unable to remove gpio_chip?\n");
}
pci_release_region(pdev, GPIO_BAR);
}
static struct pci_device_id cs5535_gpio_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, cs5535_gpio_pci_tbl);
/*
* We can't use the standard PCI driver registration stuff here, since
* that allows only one driver to bind to each PCI device (and we want
* multiple drivers to be able to bind to the device). Instead, manually
* scan for the PCI device, request a single region, and keep track of the
* devices that we're using.
*/
static int __init cs5535_gpio_scan_pci(void)
{
struct pci_dev *pdev;
int err = -ENODEV;
int i;
for (i = 0; i < ARRAY_SIZE(cs5535_gpio_pci_tbl); i++) {
pdev = pci_get_device(cs5535_gpio_pci_tbl[i].vendor,
cs5535_gpio_pci_tbl[i].device, NULL);
if (pdev) {
err = cs5535_gpio_probe(pdev, &cs5535_gpio_pci_tbl[i]);
if (err)
pci_dev_put(pdev);
/* we only support a single CS5535/6 southbridge */
break;
}
}
return err;
}
static void __exit cs5535_gpio_free_pci(void)
{
cs5535_gpio_remove(cs5535_gpio_chip.pdev);
pci_dev_put(cs5535_gpio_chip.pdev);
}
static int __init cs5535_gpio_init(void)
{
return cs5535_gpio_scan_pci();
}
static void __exit cs5535_gpio_exit(void)
{
cs5535_gpio_free_pci();
}
module_init(cs5535_gpio_init);
module_exit(cs5535_gpio_exit);
MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
MODULE_LICENSE("GPL");