lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f2d255a078
android_kernel_xiaomi_sm8350/drivers/net/wireless/iwlwifi/iwl-power.c
Wey-Yi Guy 7cb1b0887f iwlagn: reduce redundant parameter definitions 
move paramater definitions to a device paramater structure only
leaving the device name, which antennas are used and what firmware
file to use in the iwl_cfg structure.  this will not completely
remove the redundancies but greatly reduce them for devices that
only vary by name or antennas.  the parameters that are more
likely to change within a given device family are left in iwl_cfg.
also separate bt param structure added to help reduce more.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 08:10:00 -07:00

345 lines
12 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-power.h"
/*
* Setting power level allows the card to go to sleep when not busy.
*
* We calculate a sleep command based on the required latency, which
* we get from mac80211. In order to handle thermal throttling, we can
* also use pre-defined power levels.
*/
/*
* For now, keep using power level 1 instead of automatically
* adjusting ...
*/
bool no_sleep_autoadjust = true;
module_param(no_sleep_autoadjust, bool, S_IRUGO);
MODULE_PARM_DESC(no_sleep_autoadjust,
"don't automatically adjust sleep level "
"according to maximum network latency");
/*
* This defines the old power levels. They are still used by default
* (level 1) and for thermal throttle (levels 3 through 5)
*/
struct iwl_power_vec_entry {
struct iwl_powertable_cmd cmd;
u8 no_dtim; /* number of skip dtim */
};
#define IWL_DTIM_RANGE_0_MAX 2
#define IWL_DTIM_RANGE_1_MAX 10
#define NOSLP cpu_to_le16(0), 0, 0
#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
#define TU_TO_USEC 1024
#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
cpu_to_le32(X1), \
cpu_to_le32(X2), \
cpu_to_le32(X3), \
cpu_to_le32(X4)}
/* default power management (not Tx power) table values */
/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
/* DTIM 0 - 2 */
static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
};
/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
/* DTIM 3 - 10 */
static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
};
/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
/* DTIM 11 - */
static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
};
static void iwl_static_sleep_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd,
enum iwl_power_level lvl, int period)
{
const struct iwl_power_vec_entry *table;
int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
int i;
u8 skip;
u32 slp_itrvl;
table = range_2;
if (period <= IWL_DTIM_RANGE_1_MAX)
table = range_1;
if (period <= IWL_DTIM_RANGE_0_MAX)
table = range_0;
BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
*cmd = table[lvl].cmd;
if (period == 0) {
skip = 0;
period = 1;
for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
max_sleep[i] = 1;
} else {
skip = table[lvl].no_dtim;
for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
}
slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
/* figure out the listen interval based on dtim period and skip */
if (slp_itrvl == 0xFF)
cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
cpu_to_le32(period * (skip + 1));
slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
if (slp_itrvl > period)
cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
cpu_to_le32((slp_itrvl / period) * period);
if (skip)
cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
else
cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
/* enforce max sleep interval */
for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
if (le32_to_cpu(cmd->sleep_interval[i]) >
(max_sleep[i] * period))
cmd->sleep_interval[i] =
cpu_to_le32(max_sleep[i] * period);
if (i != (IWL_POWER_VEC_SIZE - 1)) {
if (le32_to_cpu(cmd->sleep_interval[i]) >
le32_to_cpu(cmd->sleep_interval[i+1]))
cmd->sleep_interval[i] =
cmd->sleep_interval[i+1];
}
}
if (priv->power_data.pci_pm)
cmd->flags |= IWL_POWER_PCI_PM_MSK;
else
cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
skip, period);
IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
}
static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd)
{
memset(cmd, 0, sizeof(*cmd));
if (priv->power_data.pci_pm)
cmd->flags |= IWL_POWER_PCI_PM_MSK;
IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
}
static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd,
int dynps_ms, int wakeup_period)
{
/*
* These are the original power level 3 sleep successions. The
* device may behave better with such succession and was also
* only tested with that. Just like the original sleep commands,
* also adjust the succession here to the wakeup_period below.
* The ranges are the same as for the sleep commands, 0-2, 3-9
* and >10, which is selected based on the DTIM interval for
* the sleep index but here we use the wakeup period since that
* is what we need to do for the latency requirements.
*/
static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 };
static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 };
static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF };
const u8 *slp_succ = slp_succ_r0;
int i;
if (wakeup_period > IWL_DTIM_RANGE_0_MAX)
slp_succ = slp_succ_r1;
if (wakeup_period > IWL_DTIM_RANGE_1_MAX)
slp_succ = slp_succ_r2;
memset(cmd, 0, sizeof(*cmd));
cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK |
IWL_POWER_FAST_PD; /* no use seeing frames for others */
if (priv->power_data.pci_pm)
cmd->flags |= IWL_POWER_PCI_PM_MSK;
cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms);
cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms);
for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
cmd->sleep_interval[i] =
cpu_to_le32(min_t(int, slp_succ[i], wakeup_period));
IWL_DEBUG_POWER(priv, "Automatic sleep command\n");
}
static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
{
IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
le32_to_cpu(cmd->sleep_interval[0]),
le32_to_cpu(cmd->sleep_interval[1]),
le32_to_cpu(cmd->sleep_interval[2]),
le32_to_cpu(cmd->sleep_interval[3]),
le32_to_cpu(cmd->sleep_interval[4]));
return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
sizeof(struct iwl_powertable_cmd), cmd);
}
/* priv->mutex must be held */
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
int ret = 0;
bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
bool update_chains;
struct iwl_powertable_cmd cmd;
int dtimper;
/* Don't update the RX chain when chain noise calibration is running */
update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
dtimper = priv->hw->conf.ps_dtim_period ?: 1;
if (priv->cfg->base_params->broken_powersave)
iwl_power_sleep_cam_cmd(priv, &cmd);
else if (priv->cfg->base_params->supports_idle &&
priv->hw->conf.flags & IEEE80211_CONF_IDLE)
iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_5, 20);
else if (priv->cfg->ops->lib->tt_ops.lower_power_detection &&
priv->cfg->ops->lib->tt_ops.tt_power_mode &&
priv->cfg->ops->lib->tt_ops.lower_power_detection(priv)) {
/* in thermal throttling low power state */
iwl_static_sleep_cmd(priv, &cmd,
priv->cfg->ops->lib->tt_ops.tt_power_mode(priv), dtimper);
} else if (!enabled)
iwl_power_sleep_cam_cmd(priv, &cmd);
else if (priv->power_data.debug_sleep_level_override >= 0)
iwl_static_sleep_cmd(priv, &cmd,
priv->power_data.debug_sleep_level_override,
dtimper);
else if (no_sleep_autoadjust)
iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_1, dtimper);
else
iwl_power_fill_sleep_cmd(priv, &cmd,
priv->hw->conf.dynamic_ps_timeout,
priv->hw->conf.max_sleep_period);
if (iwl_is_ready_rf(priv) &&
(memcmp(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)) || force)) {
if (cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
set_bit(STATUS_POWER_PMI, &priv->status);
ret = iwl_set_power(priv, &cmd);
if (!ret) {
if (!(cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
clear_bit(STATUS_POWER_PMI, &priv->status);
if (priv->cfg->ops->lib->update_chain_flags &&
update_chains)
priv->cfg->ops->lib->update_chain_flags(priv);
else if (priv->cfg->ops->lib->update_chain_flags)
IWL_DEBUG_POWER(priv,
"Cannot update the power, chain noise "
"calibration running: %d\n",
priv->chain_noise_data.state);
memcpy(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd));
} else
IWL_ERR(priv, "set power fail, ret = %d", ret);
}
return ret;
}
EXPORT_SYMBOL(iwl_power_update_mode);
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
u16 lctl = iwl_pcie_link_ctl(priv);
priv->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
priv->power_data.debug_sleep_level_override = -1;
memset(&priv->power_data.sleep_cmd, 0,
sizeof(priv->power_data.sleep_cmd));
}
EXPORT_SYMBOL(iwl_power_initialize);
Reference in New Issue View Git Blame Copy Permalink