167 lines
5.0 KiB
C
167 lines
5.0 KiB
C
/*
|
|
* The setup file for serial related hardware on PMC-Sierra MSP processors.
|
|
*
|
|
* Copyright 2005 PMC-Sierra, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_reg.h>
|
|
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/serial.h>
|
|
#include <linux/serial_8250.h>
|
|
|
|
#include <msp_prom.h>
|
|
#include <msp_int.h>
|
|
#include <msp_regs.h>
|
|
|
|
#ifdef CONFIG_KGDB
|
|
/*
|
|
* kgdb uses serial port 1 so the console can remain on port 0.
|
|
* To use port 0 change the definition to read as follows:
|
|
* #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
|
|
*/
|
|
#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
|
|
|
|
int putDebugChar(char c)
|
|
{
|
|
volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
|
|
uint32_t val = (uint32_t)c;
|
|
|
|
local_irq_disable();
|
|
while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
|
|
uart[0] = val;
|
|
while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
|
|
local_irq_enable();
|
|
|
|
return 1;
|
|
}
|
|
|
|
char getDebugChar(void)
|
|
{
|
|
volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
|
|
uint32_t val;
|
|
|
|
while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
|
|
val = uart[0];
|
|
|
|
return (char)val;
|
|
}
|
|
|
|
void initDebugPort(unsigned int uartclk, unsigned int baudrate)
|
|
{
|
|
unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
|
|
|
|
/* Enable FIFOs */
|
|
writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
|
|
UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
|
|
(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
|
|
|
|
/* Select brtc divisor */
|
|
writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
|
|
|
|
/* Store divisor lsb */
|
|
writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
|
|
|
|
/* Store divisor msb */
|
|
writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
|
|
|
|
/* Set 8N1 mode */
|
|
writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
|
|
|
|
/* Disable flow control */
|
|
writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
|
|
|
|
/* Disable receive interrupt(!) */
|
|
writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
|
|
}
|
|
#endif
|
|
|
|
void __init msp_serial_setup(void)
|
|
{
|
|
char *s;
|
|
char *endp;
|
|
struct uart_port up;
|
|
unsigned int uartclk;
|
|
|
|
memset(&up, 0, sizeof(up));
|
|
|
|
/* Check if clock was specified in environment */
|
|
s = prom_getenv("uartfreqhz");
|
|
if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
|
|
uartclk = MSP_BASE_BAUD;
|
|
ppfinit("UART clock set to %d\n", uartclk);
|
|
|
|
/* Initialize first serial port */
|
|
up.mapbase = MSP_UART0_BASE;
|
|
up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
|
|
up.irq = MSP_INT_UART0;
|
|
up.uartclk = uartclk;
|
|
up.regshift = 2;
|
|
up.iotype = UPIO_DWAPB; /* UPIO_MEM like */
|
|
up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
|
up.type = PORT_16550A;
|
|
up.line = 0;
|
|
up.private_data = (void*)UART0_STATUS_REG;
|
|
if (early_serial_setup(&up))
|
|
printk(KERN_ERR "Early serial init of port 0 failed\n");
|
|
|
|
/* Initialize the second serial port, if one exists */
|
|
switch (mips_machtype) {
|
|
case MACH_MSP4200_EVAL:
|
|
case MACH_MSP4200_GW:
|
|
case MACH_MSP4200_FPGA:
|
|
case MACH_MSP7120_EVAL:
|
|
case MACH_MSP7120_GW:
|
|
case MACH_MSP7120_FPGA:
|
|
/* Enable UART1 on MSP4200 and MSP7120 */
|
|
*GPIO_CFG2_REG = 0x00002299;
|
|
|
|
#ifdef CONFIG_KGDB
|
|
/* Initialize UART1 for kgdb since PMON doesn't */
|
|
if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
|
|
if( mips_machtype == MACH_MSP4200_FPGA
|
|
|| mips_machtype == MACH_MSP7120_FPGA )
|
|
initDebugPort(uartclk, 19200);
|
|
else
|
|
initDebugPort(uartclk, 57600);
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
default:
|
|
return; /* No second serial port, good-bye. */
|
|
}
|
|
|
|
up.mapbase = MSP_UART1_BASE;
|
|
up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
|
|
up.irq = MSP_INT_UART1;
|
|
up.line = 1;
|
|
up.private_data = (void*)UART1_STATUS_REG;
|
|
if (early_serial_setup(&up))
|
|
printk(KERN_ERR "Early serial init of port 1 failed\n");
|
|
}
|