882fe011a9
Correct an issue with the IPMI message layer taking a lock and calling lower layer driver. If an error occrues at the lower layer the lock can be taken again causing a deadlock. The lock is released before calling the lower layer. Signed-off-by: David Griego <dgriego@mvista.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
3181 lines
86 KiB
C
3181 lines
86 KiB
C
/*
|
|
* ipmi_msghandler.c
|
|
*
|
|
* Incoming and outgoing message routing for an IPMI interface.
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* Corey Minyard <minyard@mvista.com>
|
|
* source@mvista.com
|
|
*
|
|
* Copyright 2002 MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/system.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/rwsem.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/ipmi.h>
|
|
#include <linux/ipmi_smi.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/init.h>
|
|
#include <linux/proc_fs.h>
|
|
|
|
#define PFX "IPMI message handler: "
|
|
#define IPMI_MSGHANDLER_VERSION "v33"
|
|
|
|
static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
|
|
static int ipmi_init_msghandler(void);
|
|
|
|
static int initialized = 0;
|
|
|
|
static struct proc_dir_entry *proc_ipmi_root = NULL;
|
|
|
|
#define MAX_EVENTS_IN_QUEUE 25
|
|
|
|
/* Don't let a message sit in a queue forever, always time it with at lest
|
|
the max message timer. This is in milliseconds. */
|
|
#define MAX_MSG_TIMEOUT 60000
|
|
|
|
struct ipmi_user
|
|
{
|
|
struct list_head link;
|
|
|
|
/* The upper layer that handles receive messages. */
|
|
struct ipmi_user_hndl *handler;
|
|
void *handler_data;
|
|
|
|
/* The interface this user is bound to. */
|
|
ipmi_smi_t intf;
|
|
|
|
/* Does this interface receive IPMI events? */
|
|
int gets_events;
|
|
};
|
|
|
|
struct cmd_rcvr
|
|
{
|
|
struct list_head link;
|
|
|
|
ipmi_user_t user;
|
|
unsigned char netfn;
|
|
unsigned char cmd;
|
|
};
|
|
|
|
struct seq_table
|
|
{
|
|
unsigned int inuse : 1;
|
|
unsigned int broadcast : 1;
|
|
|
|
unsigned long timeout;
|
|
unsigned long orig_timeout;
|
|
unsigned int retries_left;
|
|
|
|
/* To verify on an incoming send message response that this is
|
|
the message that the response is for, we keep a sequence id
|
|
and increment it every time we send a message. */
|
|
long seqid;
|
|
|
|
/* This is held so we can properly respond to the message on a
|
|
timeout, and it is used to hold the temporary data for
|
|
retransmission, too. */
|
|
struct ipmi_recv_msg *recv_msg;
|
|
};
|
|
|
|
/* Store the information in a msgid (long) to allow us to find a
|
|
sequence table entry from the msgid. */
|
|
#define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff))
|
|
|
|
#define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \
|
|
do { \
|
|
seq = ((msgid >> 26) & 0x3f); \
|
|
seqid = (msgid & 0x3fffff); \
|
|
} while(0)
|
|
|
|
#define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff)
|
|
|
|
struct ipmi_channel
|
|
{
|
|
unsigned char medium;
|
|
unsigned char protocol;
|
|
};
|
|
|
|
struct ipmi_proc_entry
|
|
{
|
|
char *name;
|
|
struct ipmi_proc_entry *next;
|
|
};
|
|
|
|
#define IPMI_IPMB_NUM_SEQ 64
|
|
#define IPMI_MAX_CHANNELS 8
|
|
struct ipmi_smi
|
|
{
|
|
/* What interface number are we? */
|
|
int intf_num;
|
|
|
|
/* The list of upper layers that are using me. We read-lock
|
|
this when delivering messages to the upper layer to keep
|
|
the user from going away while we are processing the
|
|
message. This means that you cannot add or delete a user
|
|
from the receive callback. */
|
|
rwlock_t users_lock;
|
|
struct list_head users;
|
|
|
|
/* Used for wake ups at startup. */
|
|
wait_queue_head_t waitq;
|
|
|
|
/* The IPMI version of the BMC on the other end. */
|
|
unsigned char version_major;
|
|
unsigned char version_minor;
|
|
|
|
/* This is the lower-layer's sender routine. */
|
|
struct ipmi_smi_handlers *handlers;
|
|
void *send_info;
|
|
|
|
/* A list of proc entries for this interface. This does not
|
|
need a lock, only one thread creates it and only one thread
|
|
destroys it. */
|
|
struct ipmi_proc_entry *proc_entries;
|
|
|
|
/* A table of sequence numbers for this interface. We use the
|
|
sequence numbers for IPMB messages that go out of the
|
|
interface to match them up with their responses. A routine
|
|
is called periodically to time the items in this list. */
|
|
spinlock_t seq_lock;
|
|
struct seq_table seq_table[IPMI_IPMB_NUM_SEQ];
|
|
int curr_seq;
|
|
|
|
/* Messages that were delayed for some reason (out of memory,
|
|
for instance), will go in here to be processed later in a
|
|
periodic timer interrupt. */
|
|
spinlock_t waiting_msgs_lock;
|
|
struct list_head waiting_msgs;
|
|
|
|
/* The list of command receivers that are registered for commands
|
|
on this interface. */
|
|
rwlock_t cmd_rcvr_lock;
|
|
struct list_head cmd_rcvrs;
|
|
|
|
/* Events that were queues because no one was there to receive
|
|
them. */
|
|
spinlock_t events_lock; /* For dealing with event stuff. */
|
|
struct list_head waiting_events;
|
|
unsigned int waiting_events_count; /* How many events in queue? */
|
|
|
|
/* This will be non-null if someone registers to receive all
|
|
IPMI commands (this is for interface emulation). There
|
|
may not be any things in the cmd_rcvrs list above when
|
|
this is registered. */
|
|
ipmi_user_t all_cmd_rcvr;
|
|
|
|
/* My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR,
|
|
but may be changed by the user. */
|
|
unsigned char my_address;
|
|
|
|
/* My LUN. This should generally stay the SMS LUN, but just in
|
|
case... */
|
|
unsigned char my_lun;
|
|
|
|
/* The event receiver for my BMC, only really used at panic
|
|
shutdown as a place to store this. */
|
|
unsigned char event_receiver;
|
|
unsigned char event_receiver_lun;
|
|
unsigned char local_sel_device;
|
|
unsigned char local_event_generator;
|
|
|
|
/* A cheap hack, if this is non-null and a message to an
|
|
interface comes in with a NULL user, call this routine with
|
|
it. Note that the message will still be freed by the
|
|
caller. This only works on the system interface. */
|
|
void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_smi_msg *msg);
|
|
|
|
/* When we are scanning the channels for an SMI, this will
|
|
tell which channel we are scanning. */
|
|
int curr_channel;
|
|
|
|
/* Channel information */
|
|
struct ipmi_channel channels[IPMI_MAX_CHANNELS];
|
|
|
|
/* Proc FS stuff. */
|
|
struct proc_dir_entry *proc_dir;
|
|
char proc_dir_name[10];
|
|
|
|
spinlock_t counter_lock; /* For making counters atomic. */
|
|
|
|
/* Commands we got that were invalid. */
|
|
unsigned int sent_invalid_commands;
|
|
|
|
/* Commands we sent to the MC. */
|
|
unsigned int sent_local_commands;
|
|
/* Responses from the MC that were delivered to a user. */
|
|
unsigned int handled_local_responses;
|
|
/* Responses from the MC that were not delivered to a user. */
|
|
unsigned int unhandled_local_responses;
|
|
|
|
/* Commands we sent out to the IPMB bus. */
|
|
unsigned int sent_ipmb_commands;
|
|
/* Commands sent on the IPMB that had errors on the SEND CMD */
|
|
unsigned int sent_ipmb_command_errs;
|
|
/* Each retransmit increments this count. */
|
|
unsigned int retransmitted_ipmb_commands;
|
|
/* When a message times out (runs out of retransmits) this is
|
|
incremented. */
|
|
unsigned int timed_out_ipmb_commands;
|
|
|
|
/* This is like above, but for broadcasts. Broadcasts are
|
|
*not* included in the above count (they are expected to
|
|
time out). */
|
|
unsigned int timed_out_ipmb_broadcasts;
|
|
|
|
/* Responses I have sent to the IPMB bus. */
|
|
unsigned int sent_ipmb_responses;
|
|
|
|
/* The response was delivered to the user. */
|
|
unsigned int handled_ipmb_responses;
|
|
/* The response had invalid data in it. */
|
|
unsigned int invalid_ipmb_responses;
|
|
/* The response didn't have anyone waiting for it. */
|
|
unsigned int unhandled_ipmb_responses;
|
|
|
|
/* Commands we sent out to the IPMB bus. */
|
|
unsigned int sent_lan_commands;
|
|
/* Commands sent on the IPMB that had errors on the SEND CMD */
|
|
unsigned int sent_lan_command_errs;
|
|
/* Each retransmit increments this count. */
|
|
unsigned int retransmitted_lan_commands;
|
|
/* When a message times out (runs out of retransmits) this is
|
|
incremented. */
|
|
unsigned int timed_out_lan_commands;
|
|
|
|
/* Responses I have sent to the IPMB bus. */
|
|
unsigned int sent_lan_responses;
|
|
|
|
/* The response was delivered to the user. */
|
|
unsigned int handled_lan_responses;
|
|
/* The response had invalid data in it. */
|
|
unsigned int invalid_lan_responses;
|
|
/* The response didn't have anyone waiting for it. */
|
|
unsigned int unhandled_lan_responses;
|
|
|
|
/* The command was delivered to the user. */
|
|
unsigned int handled_commands;
|
|
/* The command had invalid data in it. */
|
|
unsigned int invalid_commands;
|
|
/* The command didn't have anyone waiting for it. */
|
|
unsigned int unhandled_commands;
|
|
|
|
/* Invalid data in an event. */
|
|
unsigned int invalid_events;
|
|
/* Events that were received with the proper format. */
|
|
unsigned int events;
|
|
};
|
|
|
|
#define MAX_IPMI_INTERFACES 4
|
|
static ipmi_smi_t ipmi_interfaces[MAX_IPMI_INTERFACES];
|
|
|
|
/* Used to keep interfaces from going away while operations are
|
|
operating on interfaces. Grab read if you are not modifying the
|
|
interfaces, write if you are. */
|
|
static DECLARE_RWSEM(interfaces_sem);
|
|
|
|
/* Directly protects the ipmi_interfaces data structure. This is
|
|
claimed in the timer interrupt. */
|
|
static DEFINE_SPINLOCK(interfaces_lock);
|
|
|
|
/* List of watchers that want to know when smi's are added and
|
|
deleted. */
|
|
static struct list_head smi_watchers = LIST_HEAD_INIT(smi_watchers);
|
|
static DECLARE_RWSEM(smi_watchers_sem);
|
|
|
|
int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher)
|
|
{
|
|
int i;
|
|
|
|
down_read(&interfaces_sem);
|
|
down_write(&smi_watchers_sem);
|
|
list_add(&(watcher->link), &smi_watchers);
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
if (ipmi_interfaces[i] != NULL) {
|
|
watcher->new_smi(i);
|
|
}
|
|
}
|
|
up_write(&smi_watchers_sem);
|
|
up_read(&interfaces_sem);
|
|
return 0;
|
|
}
|
|
|
|
int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher)
|
|
{
|
|
down_write(&smi_watchers_sem);
|
|
list_del(&(watcher->link));
|
|
up_write(&smi_watchers_sem);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
call_smi_watchers(int i)
|
|
{
|
|
struct ipmi_smi_watcher *w;
|
|
|
|
down_read(&smi_watchers_sem);
|
|
list_for_each_entry(w, &smi_watchers, link) {
|
|
if (try_module_get(w->owner)) {
|
|
w->new_smi(i);
|
|
module_put(w->owner);
|
|
}
|
|
}
|
|
up_read(&smi_watchers_sem);
|
|
}
|
|
|
|
static int
|
|
ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2)
|
|
{
|
|
if (addr1->addr_type != addr2->addr_type)
|
|
return 0;
|
|
|
|
if (addr1->channel != addr2->channel)
|
|
return 0;
|
|
|
|
if (addr1->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
|
|
struct ipmi_system_interface_addr *smi_addr1
|
|
= (struct ipmi_system_interface_addr *) addr1;
|
|
struct ipmi_system_interface_addr *smi_addr2
|
|
= (struct ipmi_system_interface_addr *) addr2;
|
|
return (smi_addr1->lun == smi_addr2->lun);
|
|
}
|
|
|
|
if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
|
|
|| (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
|
|
{
|
|
struct ipmi_ipmb_addr *ipmb_addr1
|
|
= (struct ipmi_ipmb_addr *) addr1;
|
|
struct ipmi_ipmb_addr *ipmb_addr2
|
|
= (struct ipmi_ipmb_addr *) addr2;
|
|
|
|
return ((ipmb_addr1->slave_addr == ipmb_addr2->slave_addr)
|
|
&& (ipmb_addr1->lun == ipmb_addr2->lun));
|
|
}
|
|
|
|
if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) {
|
|
struct ipmi_lan_addr *lan_addr1
|
|
= (struct ipmi_lan_addr *) addr1;
|
|
struct ipmi_lan_addr *lan_addr2
|
|
= (struct ipmi_lan_addr *) addr2;
|
|
|
|
return ((lan_addr1->remote_SWID == lan_addr2->remote_SWID)
|
|
&& (lan_addr1->local_SWID == lan_addr2->local_SWID)
|
|
&& (lan_addr1->session_handle
|
|
== lan_addr2->session_handle)
|
|
&& (lan_addr1->lun == lan_addr2->lun));
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
int ipmi_validate_addr(struct ipmi_addr *addr, int len)
|
|
{
|
|
if (len < sizeof(struct ipmi_system_interface_addr)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
|
|
if (addr->channel != IPMI_BMC_CHANNEL)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
if ((addr->channel == IPMI_BMC_CHANNEL)
|
|
|| (addr->channel >= IPMI_NUM_CHANNELS)
|
|
|| (addr->channel < 0))
|
|
return -EINVAL;
|
|
|
|
if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
|
|
|| (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
|
|
{
|
|
if (len < sizeof(struct ipmi_ipmb_addr)) {
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
|
|
if (len < sizeof(struct ipmi_lan_addr)) {
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
unsigned int ipmi_addr_length(int addr_type)
|
|
{
|
|
if (addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
|
|
return sizeof(struct ipmi_system_interface_addr);
|
|
|
|
if ((addr_type == IPMI_IPMB_ADDR_TYPE)
|
|
|| (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
|
|
{
|
|
return sizeof(struct ipmi_ipmb_addr);
|
|
}
|
|
|
|
if (addr_type == IPMI_LAN_ADDR_TYPE)
|
|
return sizeof(struct ipmi_lan_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void deliver_response(struct ipmi_recv_msg *msg)
|
|
{
|
|
msg->user->handler->ipmi_recv_hndl(msg, msg->user->handler_data);
|
|
}
|
|
|
|
/* Find the next sequence number not being used and add the given
|
|
message with the given timeout to the sequence table. This must be
|
|
called with the interface's seq_lock held. */
|
|
static int intf_next_seq(ipmi_smi_t intf,
|
|
struct ipmi_recv_msg *recv_msg,
|
|
unsigned long timeout,
|
|
int retries,
|
|
int broadcast,
|
|
unsigned char *seq,
|
|
long *seqid)
|
|
{
|
|
int rv = 0;
|
|
unsigned int i;
|
|
|
|
for (i=intf->curr_seq;
|
|
(i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq;
|
|
i=(i+1)%IPMI_IPMB_NUM_SEQ)
|
|
{
|
|
if (! intf->seq_table[i].inuse)
|
|
break;
|
|
}
|
|
|
|
if (! intf->seq_table[i].inuse) {
|
|
intf->seq_table[i].recv_msg = recv_msg;
|
|
|
|
/* Start with the maximum timeout, when the send response
|
|
comes in we will start the real timer. */
|
|
intf->seq_table[i].timeout = MAX_MSG_TIMEOUT;
|
|
intf->seq_table[i].orig_timeout = timeout;
|
|
intf->seq_table[i].retries_left = retries;
|
|
intf->seq_table[i].broadcast = broadcast;
|
|
intf->seq_table[i].inuse = 1;
|
|
intf->seq_table[i].seqid = NEXT_SEQID(intf->seq_table[i].seqid);
|
|
*seq = i;
|
|
*seqid = intf->seq_table[i].seqid;
|
|
intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ;
|
|
} else {
|
|
rv = -EAGAIN;
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
/* Return the receive message for the given sequence number and
|
|
release the sequence number so it can be reused. Some other data
|
|
is passed in to be sure the message matches up correctly (to help
|
|
guard against message coming in after their timeout and the
|
|
sequence number being reused). */
|
|
static int intf_find_seq(ipmi_smi_t intf,
|
|
unsigned char seq,
|
|
short channel,
|
|
unsigned char cmd,
|
|
unsigned char netfn,
|
|
struct ipmi_addr *addr,
|
|
struct ipmi_recv_msg **recv_msg)
|
|
{
|
|
int rv = -ENODEV;
|
|
unsigned long flags;
|
|
|
|
if (seq >= IPMI_IPMB_NUM_SEQ)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&(intf->seq_lock), flags);
|
|
if (intf->seq_table[seq].inuse) {
|
|
struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg;
|
|
|
|
if ((msg->addr.channel == channel)
|
|
&& (msg->msg.cmd == cmd)
|
|
&& (msg->msg.netfn == netfn)
|
|
&& (ipmi_addr_equal(addr, &(msg->addr))))
|
|
{
|
|
*recv_msg = msg;
|
|
intf->seq_table[seq].inuse = 0;
|
|
rv = 0;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&(intf->seq_lock), flags);
|
|
|
|
return rv;
|
|
}
|
|
|
|
|
|
/* Start the timer for a specific sequence table entry. */
|
|
static int intf_start_seq_timer(ipmi_smi_t intf,
|
|
long msgid)
|
|
{
|
|
int rv = -ENODEV;
|
|
unsigned long flags;
|
|
unsigned char seq;
|
|
unsigned long seqid;
|
|
|
|
|
|
GET_SEQ_FROM_MSGID(msgid, seq, seqid);
|
|
|
|
spin_lock_irqsave(&(intf->seq_lock), flags);
|
|
/* We do this verification because the user can be deleted
|
|
while a message is outstanding. */
|
|
if ((intf->seq_table[seq].inuse)
|
|
&& (intf->seq_table[seq].seqid == seqid))
|
|
{
|
|
struct seq_table *ent = &(intf->seq_table[seq]);
|
|
ent->timeout = ent->orig_timeout;
|
|
rv = 0;
|
|
}
|
|
spin_unlock_irqrestore(&(intf->seq_lock), flags);
|
|
|
|
return rv;
|
|
}
|
|
|
|
/* Got an error for the send message for a specific sequence number. */
|
|
static int intf_err_seq(ipmi_smi_t intf,
|
|
long msgid,
|
|
unsigned int err)
|
|
{
|
|
int rv = -ENODEV;
|
|
unsigned long flags;
|
|
unsigned char seq;
|
|
unsigned long seqid;
|
|
struct ipmi_recv_msg *msg = NULL;
|
|
|
|
|
|
GET_SEQ_FROM_MSGID(msgid, seq, seqid);
|
|
|
|
spin_lock_irqsave(&(intf->seq_lock), flags);
|
|
/* We do this verification because the user can be deleted
|
|
while a message is outstanding. */
|
|
if ((intf->seq_table[seq].inuse)
|
|
&& (intf->seq_table[seq].seqid == seqid))
|
|
{
|
|
struct seq_table *ent = &(intf->seq_table[seq]);
|
|
|
|
ent->inuse = 0;
|
|
msg = ent->recv_msg;
|
|
rv = 0;
|
|
}
|
|
spin_unlock_irqrestore(&(intf->seq_lock), flags);
|
|
|
|
if (msg) {
|
|
msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
|
|
msg->msg_data[0] = err;
|
|
msg->msg.netfn |= 1; /* Convert to a response. */
|
|
msg->msg.data_len = 1;
|
|
msg->msg.data = msg->msg_data;
|
|
deliver_response(msg);
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
|
|
int ipmi_create_user(unsigned int if_num,
|
|
struct ipmi_user_hndl *handler,
|
|
void *handler_data,
|
|
ipmi_user_t *user)
|
|
{
|
|
unsigned long flags;
|
|
ipmi_user_t new_user;
|
|
int rv = 0;
|
|
ipmi_smi_t intf;
|
|
|
|
/* There is no module usecount here, because it's not
|
|
required. Since this can only be used by and called from
|
|
other modules, they will implicitly use this module, and
|
|
thus this can't be removed unless the other modules are
|
|
removed. */
|
|
|
|
if (handler == NULL)
|
|
return -EINVAL;
|
|
|
|
/* Make sure the driver is actually initialized, this handles
|
|
problems with initialization order. */
|
|
if (!initialized) {
|
|
rv = ipmi_init_msghandler();
|
|
if (rv)
|
|
return rv;
|
|
|
|
/* The init code doesn't return an error if it was turned
|
|
off, but it won't initialize. Check that. */
|
|
if (!initialized)
|
|
return -ENODEV;
|
|
}
|
|
|
|
new_user = kmalloc(sizeof(*new_user), GFP_KERNEL);
|
|
if (! new_user)
|
|
return -ENOMEM;
|
|
|
|
down_read(&interfaces_sem);
|
|
if ((if_num > MAX_IPMI_INTERFACES) || ipmi_interfaces[if_num] == NULL)
|
|
{
|
|
rv = -EINVAL;
|
|
goto out_unlock;
|
|
}
|
|
|
|
intf = ipmi_interfaces[if_num];
|
|
|
|
new_user->handler = handler;
|
|
new_user->handler_data = handler_data;
|
|
new_user->intf = intf;
|
|
new_user->gets_events = 0;
|
|
|
|
if (!try_module_get(intf->handlers->owner)) {
|
|
rv = -ENODEV;
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (intf->handlers->inc_usecount) {
|
|
rv = intf->handlers->inc_usecount(intf->send_info);
|
|
if (rv) {
|
|
module_put(intf->handlers->owner);
|
|
goto out_unlock;
|
|
}
|
|
}
|
|
|
|
write_lock_irqsave(&intf->users_lock, flags);
|
|
list_add_tail(&new_user->link, &intf->users);
|
|
write_unlock_irqrestore(&intf->users_lock, flags);
|
|
|
|
out_unlock:
|
|
if (rv) {
|
|
kfree(new_user);
|
|
} else {
|
|
*user = new_user;
|
|
}
|
|
|
|
up_read(&interfaces_sem);
|
|
return rv;
|
|
}
|
|
|
|
static int ipmi_destroy_user_nolock(ipmi_user_t user)
|
|
{
|
|
int rv = -ENODEV;
|
|
ipmi_user_t t_user;
|
|
struct cmd_rcvr *rcvr, *rcvr2;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
/* Find the user and delete them from the list. */
|
|
list_for_each_entry(t_user, &(user->intf->users), link) {
|
|
if (t_user == user) {
|
|
list_del(&t_user->link);
|
|
rv = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (rv) {
|
|
goto out_unlock;
|
|
}
|
|
|
|
/* Remove the user from the interfaces sequence table. */
|
|
spin_lock_irqsave(&(user->intf->seq_lock), flags);
|
|
for (i=0; i<IPMI_IPMB_NUM_SEQ; i++) {
|
|
if (user->intf->seq_table[i].inuse
|
|
&& (user->intf->seq_table[i].recv_msg->user == user))
|
|
{
|
|
user->intf->seq_table[i].inuse = 0;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&(user->intf->seq_lock), flags);
|
|
|
|
/* Remove the user from the command receiver's table. */
|
|
write_lock_irqsave(&(user->intf->cmd_rcvr_lock), flags);
|
|
list_for_each_entry_safe(rcvr, rcvr2, &(user->intf->cmd_rcvrs), link) {
|
|
if (rcvr->user == user) {
|
|
list_del(&rcvr->link);
|
|
kfree(rcvr);
|
|
}
|
|
}
|
|
write_unlock_irqrestore(&(user->intf->cmd_rcvr_lock), flags);
|
|
|
|
kfree(user);
|
|
|
|
out_unlock:
|
|
|
|
return rv;
|
|
}
|
|
|
|
int ipmi_destroy_user(ipmi_user_t user)
|
|
{
|
|
int rv;
|
|
ipmi_smi_t intf = user->intf;
|
|
unsigned long flags;
|
|
|
|
down_read(&interfaces_sem);
|
|
write_lock_irqsave(&intf->users_lock, flags);
|
|
rv = ipmi_destroy_user_nolock(user);
|
|
if (!rv) {
|
|
module_put(intf->handlers->owner);
|
|
if (intf->handlers->dec_usecount)
|
|
intf->handlers->dec_usecount(intf->send_info);
|
|
}
|
|
|
|
write_unlock_irqrestore(&intf->users_lock, flags);
|
|
up_read(&interfaces_sem);
|
|
return rv;
|
|
}
|
|
|
|
void ipmi_get_version(ipmi_user_t user,
|
|
unsigned char *major,
|
|
unsigned char *minor)
|
|
{
|
|
*major = user->intf->version_major;
|
|
*minor = user->intf->version_minor;
|
|
}
|
|
|
|
void ipmi_set_my_address(ipmi_user_t user,
|
|
unsigned char address)
|
|
{
|
|
user->intf->my_address = address;
|
|
}
|
|
|
|
unsigned char ipmi_get_my_address(ipmi_user_t user)
|
|
{
|
|
return user->intf->my_address;
|
|
}
|
|
|
|
void ipmi_set_my_LUN(ipmi_user_t user,
|
|
unsigned char LUN)
|
|
{
|
|
user->intf->my_lun = LUN & 0x3;
|
|
}
|
|
|
|
unsigned char ipmi_get_my_LUN(ipmi_user_t user)
|
|
{
|
|
return user->intf->my_lun;
|
|
}
|
|
|
|
int ipmi_set_gets_events(ipmi_user_t user, int val)
|
|
{
|
|
unsigned long flags;
|
|
struct ipmi_recv_msg *msg, *msg2;
|
|
|
|
read_lock(&(user->intf->users_lock));
|
|
spin_lock_irqsave(&(user->intf->events_lock), flags);
|
|
user->gets_events = val;
|
|
|
|
if (val) {
|
|
/* Deliver any queued events. */
|
|
list_for_each_entry_safe(msg, msg2, &(user->intf->waiting_events), link) {
|
|
list_del(&msg->link);
|
|
msg->user = user;
|
|
deliver_response(msg);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&(user->intf->events_lock), flags);
|
|
read_unlock(&(user->intf->users_lock));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ipmi_register_for_cmd(ipmi_user_t user,
|
|
unsigned char netfn,
|
|
unsigned char cmd)
|
|
{
|
|
struct cmd_rcvr *cmp;
|
|
unsigned long flags;
|
|
struct cmd_rcvr *rcvr;
|
|
int rv = 0;
|
|
|
|
|
|
rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL);
|
|
if (! rcvr)
|
|
return -ENOMEM;
|
|
|
|
read_lock(&(user->intf->users_lock));
|
|
write_lock_irqsave(&(user->intf->cmd_rcvr_lock), flags);
|
|
if (user->intf->all_cmd_rcvr != NULL) {
|
|
rv = -EBUSY;
|
|
goto out_unlock;
|
|
}
|
|
|
|
/* Make sure the command/netfn is not already registered. */
|
|
list_for_each_entry(cmp, &(user->intf->cmd_rcvrs), link) {
|
|
if ((cmp->netfn == netfn) && (cmp->cmd == cmd)) {
|
|
rv = -EBUSY;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (! rv) {
|
|
rcvr->cmd = cmd;
|
|
rcvr->netfn = netfn;
|
|
rcvr->user = user;
|
|
list_add_tail(&(rcvr->link), &(user->intf->cmd_rcvrs));
|
|
}
|
|
out_unlock:
|
|
write_unlock_irqrestore(&(user->intf->cmd_rcvr_lock), flags);
|
|
read_unlock(&(user->intf->users_lock));
|
|
|
|
if (rv)
|
|
kfree(rcvr);
|
|
|
|
return rv;
|
|
}
|
|
|
|
int ipmi_unregister_for_cmd(ipmi_user_t user,
|
|
unsigned char netfn,
|
|
unsigned char cmd)
|
|
{
|
|
unsigned long flags;
|
|
struct cmd_rcvr *rcvr;
|
|
int rv = -ENOENT;
|
|
|
|
read_lock(&(user->intf->users_lock));
|
|
write_lock_irqsave(&(user->intf->cmd_rcvr_lock), flags);
|
|
/* Make sure the command/netfn is not already registered. */
|
|
list_for_each_entry(rcvr, &(user->intf->cmd_rcvrs), link) {
|
|
if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)) {
|
|
rv = 0;
|
|
list_del(&rcvr->link);
|
|
kfree(rcvr);
|
|
break;
|
|
}
|
|
}
|
|
write_unlock_irqrestore(&(user->intf->cmd_rcvr_lock), flags);
|
|
read_unlock(&(user->intf->users_lock));
|
|
|
|
return rv;
|
|
}
|
|
|
|
void ipmi_user_set_run_to_completion(ipmi_user_t user, int val)
|
|
{
|
|
user->intf->handlers->set_run_to_completion(user->intf->send_info,
|
|
val);
|
|
}
|
|
|
|
static unsigned char
|
|
ipmb_checksum(unsigned char *data, int size)
|
|
{
|
|
unsigned char csum = 0;
|
|
|
|
for (; size > 0; size--, data++)
|
|
csum += *data;
|
|
|
|
return -csum;
|
|
}
|
|
|
|
static inline void format_ipmb_msg(struct ipmi_smi_msg *smi_msg,
|
|
struct kernel_ipmi_msg *msg,
|
|
struct ipmi_ipmb_addr *ipmb_addr,
|
|
long msgid,
|
|
unsigned char ipmb_seq,
|
|
int broadcast,
|
|
unsigned char source_address,
|
|
unsigned char source_lun)
|
|
{
|
|
int i = broadcast;
|
|
|
|
/* Format the IPMB header data. */
|
|
smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
smi_msg->data[1] = IPMI_SEND_MSG_CMD;
|
|
smi_msg->data[2] = ipmb_addr->channel;
|
|
if (broadcast)
|
|
smi_msg->data[3] = 0;
|
|
smi_msg->data[i+3] = ipmb_addr->slave_addr;
|
|
smi_msg->data[i+4] = (msg->netfn << 2) | (ipmb_addr->lun & 0x3);
|
|
smi_msg->data[i+5] = ipmb_checksum(&(smi_msg->data[i+3]), 2);
|
|
smi_msg->data[i+6] = source_address;
|
|
smi_msg->data[i+7] = (ipmb_seq << 2) | source_lun;
|
|
smi_msg->data[i+8] = msg->cmd;
|
|
|
|
/* Now tack on the data to the message. */
|
|
if (msg->data_len > 0)
|
|
memcpy(&(smi_msg->data[i+9]), msg->data,
|
|
msg->data_len);
|
|
smi_msg->data_size = msg->data_len + 9;
|
|
|
|
/* Now calculate the checksum and tack it on. */
|
|
smi_msg->data[i+smi_msg->data_size]
|
|
= ipmb_checksum(&(smi_msg->data[i+6]),
|
|
smi_msg->data_size-6);
|
|
|
|
/* Add on the checksum size and the offset from the
|
|
broadcast. */
|
|
smi_msg->data_size += 1 + i;
|
|
|
|
smi_msg->msgid = msgid;
|
|
}
|
|
|
|
static inline void format_lan_msg(struct ipmi_smi_msg *smi_msg,
|
|
struct kernel_ipmi_msg *msg,
|
|
struct ipmi_lan_addr *lan_addr,
|
|
long msgid,
|
|
unsigned char ipmb_seq,
|
|
unsigned char source_lun)
|
|
{
|
|
/* Format the IPMB header data. */
|
|
smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
smi_msg->data[1] = IPMI_SEND_MSG_CMD;
|
|
smi_msg->data[2] = lan_addr->channel;
|
|
smi_msg->data[3] = lan_addr->session_handle;
|
|
smi_msg->data[4] = lan_addr->remote_SWID;
|
|
smi_msg->data[5] = (msg->netfn << 2) | (lan_addr->lun & 0x3);
|
|
smi_msg->data[6] = ipmb_checksum(&(smi_msg->data[4]), 2);
|
|
smi_msg->data[7] = lan_addr->local_SWID;
|
|
smi_msg->data[8] = (ipmb_seq << 2) | source_lun;
|
|
smi_msg->data[9] = msg->cmd;
|
|
|
|
/* Now tack on the data to the message. */
|
|
if (msg->data_len > 0)
|
|
memcpy(&(smi_msg->data[10]), msg->data,
|
|
msg->data_len);
|
|
smi_msg->data_size = msg->data_len + 10;
|
|
|
|
/* Now calculate the checksum and tack it on. */
|
|
smi_msg->data[smi_msg->data_size]
|
|
= ipmb_checksum(&(smi_msg->data[7]),
|
|
smi_msg->data_size-7);
|
|
|
|
/* Add on the checksum size and the offset from the
|
|
broadcast. */
|
|
smi_msg->data_size += 1;
|
|
|
|
smi_msg->msgid = msgid;
|
|
}
|
|
|
|
/* Separate from ipmi_request so that the user does not have to be
|
|
supplied in certain circumstances (mainly at panic time). If
|
|
messages are supplied, they will be freed, even if an error
|
|
occurs. */
|
|
static inline int i_ipmi_request(ipmi_user_t user,
|
|
ipmi_smi_t intf,
|
|
struct ipmi_addr *addr,
|
|
long msgid,
|
|
struct kernel_ipmi_msg *msg,
|
|
void *user_msg_data,
|
|
void *supplied_smi,
|
|
struct ipmi_recv_msg *supplied_recv,
|
|
int priority,
|
|
unsigned char source_address,
|
|
unsigned char source_lun,
|
|
int retries,
|
|
unsigned int retry_time_ms)
|
|
{
|
|
int rv = 0;
|
|
struct ipmi_smi_msg *smi_msg;
|
|
struct ipmi_recv_msg *recv_msg;
|
|
unsigned long flags;
|
|
|
|
|
|
if (supplied_recv) {
|
|
recv_msg = supplied_recv;
|
|
} else {
|
|
recv_msg = ipmi_alloc_recv_msg();
|
|
if (recv_msg == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
recv_msg->user_msg_data = user_msg_data;
|
|
|
|
if (supplied_smi) {
|
|
smi_msg = (struct ipmi_smi_msg *) supplied_smi;
|
|
} else {
|
|
smi_msg = ipmi_alloc_smi_msg();
|
|
if (smi_msg == NULL) {
|
|
ipmi_free_recv_msg(recv_msg);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
recv_msg->user = user;
|
|
recv_msg->msgid = msgid;
|
|
/* Store the message to send in the receive message so timeout
|
|
responses can get the proper response data. */
|
|
recv_msg->msg = *msg;
|
|
|
|
if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
|
|
struct ipmi_system_interface_addr *smi_addr;
|
|
|
|
if (msg->netfn & 1) {
|
|
/* Responses are not allowed to the SMI. */
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
smi_addr = (struct ipmi_system_interface_addr *) addr;
|
|
if (smi_addr->lun > 3) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
memcpy(&recv_msg->addr, smi_addr, sizeof(*smi_addr));
|
|
|
|
if ((msg->netfn == IPMI_NETFN_APP_REQUEST)
|
|
&& ((msg->cmd == IPMI_SEND_MSG_CMD)
|
|
|| (msg->cmd == IPMI_GET_MSG_CMD)
|
|
|| (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD)))
|
|
{
|
|
/* We don't let the user do these, since we manage
|
|
the sequence numbers. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EMSGSIZE;
|
|
goto out_err;
|
|
}
|
|
|
|
smi_msg->data[0] = (msg->netfn << 2) | (smi_addr->lun & 0x3);
|
|
smi_msg->data[1] = msg->cmd;
|
|
smi_msg->msgid = msgid;
|
|
smi_msg->user_data = recv_msg;
|
|
if (msg->data_len > 0)
|
|
memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
|
|
smi_msg->data_size = msg->data_len + 2;
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_local_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
} else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
|
|
|| (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
|
|
{
|
|
struct ipmi_ipmb_addr *ipmb_addr;
|
|
unsigned char ipmb_seq;
|
|
long seqid;
|
|
int broadcast = 0;
|
|
|
|
if (addr->channel > IPMI_NUM_CHANNELS) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
if (intf->channels[addr->channel].medium
|
|
!= IPMI_CHANNEL_MEDIUM_IPMB)
|
|
{
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
if (retries < 0) {
|
|
if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)
|
|
retries = 0; /* Don't retry broadcasts. */
|
|
else
|
|
retries = 4;
|
|
}
|
|
if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) {
|
|
/* Broadcasts add a zero at the beginning of the
|
|
message, but otherwise is the same as an IPMB
|
|
address. */
|
|
addr->addr_type = IPMI_IPMB_ADDR_TYPE;
|
|
broadcast = 1;
|
|
}
|
|
|
|
|
|
/* Default to 1 second retries. */
|
|
if (retry_time_ms == 0)
|
|
retry_time_ms = 1000;
|
|
|
|
/* 9 for the header and 1 for the checksum, plus
|
|
possibly one for the broadcast. */
|
|
if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EMSGSIZE;
|
|
goto out_err;
|
|
}
|
|
|
|
ipmb_addr = (struct ipmi_ipmb_addr *) addr;
|
|
if (ipmb_addr->lun > 3) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr));
|
|
|
|
if (recv_msg->msg.netfn & 0x1) {
|
|
/* It's a response, so use the user's sequence
|
|
from msgid. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_ipmb_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid,
|
|
msgid, broadcast,
|
|
source_address, source_lun);
|
|
|
|
/* Save the receive message so we can use it
|
|
to deliver the response. */
|
|
smi_msg->user_data = recv_msg;
|
|
} else {
|
|
/* It's a command, so get a sequence for it. */
|
|
|
|
spin_lock_irqsave(&(intf->seq_lock), flags);
|
|
|
|
spin_lock(&intf->counter_lock);
|
|
intf->sent_ipmb_commands++;
|
|
spin_unlock(&intf->counter_lock);
|
|
|
|
/* Create a sequence number with a 1 second
|
|
timeout and 4 retries. */
|
|
rv = intf_next_seq(intf,
|
|
recv_msg,
|
|
retry_time_ms,
|
|
retries,
|
|
broadcast,
|
|
&ipmb_seq,
|
|
&seqid);
|
|
if (rv) {
|
|
/* We have used up all the sequence numbers,
|
|
probably, so abort. */
|
|
spin_unlock_irqrestore(&(intf->seq_lock),
|
|
flags);
|
|
goto out_err;
|
|
}
|
|
|
|
/* Store the sequence number in the message,
|
|
so that when the send message response
|
|
comes back we can start the timer. */
|
|
format_ipmb_msg(smi_msg, msg, ipmb_addr,
|
|
STORE_SEQ_IN_MSGID(ipmb_seq, seqid),
|
|
ipmb_seq, broadcast,
|
|
source_address, source_lun);
|
|
|
|
/* Copy the message into the recv message data, so we
|
|
can retransmit it later if necessary. */
|
|
memcpy(recv_msg->msg_data, smi_msg->data,
|
|
smi_msg->data_size);
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
recv_msg->msg.data_len = smi_msg->data_size;
|
|
|
|
/* We don't unlock until here, because we need
|
|
to copy the completed message into the
|
|
recv_msg before we release the lock.
|
|
Otherwise, race conditions may bite us. I
|
|
know that's pretty paranoid, but I prefer
|
|
to be correct. */
|
|
spin_unlock_irqrestore(&(intf->seq_lock), flags);
|
|
}
|
|
} else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
|
|
struct ipmi_lan_addr *lan_addr;
|
|
unsigned char ipmb_seq;
|
|
long seqid;
|
|
|
|
if (addr->channel > IPMI_NUM_CHANNELS) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
if ((intf->channels[addr->channel].medium
|
|
!= IPMI_CHANNEL_MEDIUM_8023LAN)
|
|
&& (intf->channels[addr->channel].medium
|
|
!= IPMI_CHANNEL_MEDIUM_ASYNC))
|
|
{
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
retries = 4;
|
|
|
|
/* Default to 1 second retries. */
|
|
if (retry_time_ms == 0)
|
|
retry_time_ms = 1000;
|
|
|
|
/* 11 for the header and 1 for the checksum. */
|
|
if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EMSGSIZE;
|
|
goto out_err;
|
|
}
|
|
|
|
lan_addr = (struct ipmi_lan_addr *) addr;
|
|
if (lan_addr->lun > 3) {
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr));
|
|
|
|
if (recv_msg->msg.netfn & 0x1) {
|
|
/* It's a response, so use the user's sequence
|
|
from msgid. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_lan_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
format_lan_msg(smi_msg, msg, lan_addr, msgid,
|
|
msgid, source_lun);
|
|
|
|
/* Save the receive message so we can use it
|
|
to deliver the response. */
|
|
smi_msg->user_data = recv_msg;
|
|
} else {
|
|
/* It's a command, so get a sequence for it. */
|
|
|
|
spin_lock_irqsave(&(intf->seq_lock), flags);
|
|
|
|
spin_lock(&intf->counter_lock);
|
|
intf->sent_lan_commands++;
|
|
spin_unlock(&intf->counter_lock);
|
|
|
|
/* Create a sequence number with a 1 second
|
|
timeout and 4 retries. */
|
|
rv = intf_next_seq(intf,
|
|
recv_msg,
|
|
retry_time_ms,
|
|
retries,
|
|
0,
|
|
&ipmb_seq,
|
|
&seqid);
|
|
if (rv) {
|
|
/* We have used up all the sequence numbers,
|
|
probably, so abort. */
|
|
spin_unlock_irqrestore(&(intf->seq_lock),
|
|
flags);
|
|
goto out_err;
|
|
}
|
|
|
|
/* Store the sequence number in the message,
|
|
so that when the send message response
|
|
comes back we can start the timer. */
|
|
format_lan_msg(smi_msg, msg, lan_addr,
|
|
STORE_SEQ_IN_MSGID(ipmb_seq, seqid),
|
|
ipmb_seq, source_lun);
|
|
|
|
/* Copy the message into the recv message data, so we
|
|
can retransmit it later if necessary. */
|
|
memcpy(recv_msg->msg_data, smi_msg->data,
|
|
smi_msg->data_size);
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
recv_msg->msg.data_len = smi_msg->data_size;
|
|
|
|
/* We don't unlock until here, because we need
|
|
to copy the completed message into the
|
|
recv_msg before we release the lock.
|
|
Otherwise, race conditions may bite us. I
|
|
know that's pretty paranoid, but I prefer
|
|
to be correct. */
|
|
spin_unlock_irqrestore(&(intf->seq_lock), flags);
|
|
}
|
|
} else {
|
|
/* Unknown address type. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->sent_invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
rv = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
#ifdef DEBUG_MSGING
|
|
{
|
|
int m;
|
|
for (m=0; m<smi_msg->data_size; m++)
|
|
printk(" %2.2x", smi_msg->data[m]);
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
intf->handlers->sender(intf->send_info, smi_msg, priority);
|
|
|
|
return 0;
|
|
|
|
out_err:
|
|
ipmi_free_smi_msg(smi_msg);
|
|
ipmi_free_recv_msg(recv_msg);
|
|
return rv;
|
|
}
|
|
|
|
int ipmi_request_settime(ipmi_user_t user,
|
|
struct ipmi_addr *addr,
|
|
long msgid,
|
|
struct kernel_ipmi_msg *msg,
|
|
void *user_msg_data,
|
|
int priority,
|
|
int retries,
|
|
unsigned int retry_time_ms)
|
|
{
|
|
return i_ipmi_request(user,
|
|
user->intf,
|
|
addr,
|
|
msgid,
|
|
msg,
|
|
user_msg_data,
|
|
NULL, NULL,
|
|
priority,
|
|
user->intf->my_address,
|
|
user->intf->my_lun,
|
|
retries,
|
|
retry_time_ms);
|
|
}
|
|
|
|
int ipmi_request_supply_msgs(ipmi_user_t user,
|
|
struct ipmi_addr *addr,
|
|
long msgid,
|
|
struct kernel_ipmi_msg *msg,
|
|
void *user_msg_data,
|
|
void *supplied_smi,
|
|
struct ipmi_recv_msg *supplied_recv,
|
|
int priority)
|
|
{
|
|
return i_ipmi_request(user,
|
|
user->intf,
|
|
addr,
|
|
msgid,
|
|
msg,
|
|
user_msg_data,
|
|
supplied_smi,
|
|
supplied_recv,
|
|
priority,
|
|
user->intf->my_address,
|
|
user->intf->my_lun,
|
|
-1, 0);
|
|
}
|
|
|
|
static int ipmb_file_read_proc(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
char *out = (char *) page;
|
|
ipmi_smi_t intf = data;
|
|
|
|
return sprintf(out, "%x\n", intf->my_address);
|
|
}
|
|
|
|
static int version_file_read_proc(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
char *out = (char *) page;
|
|
ipmi_smi_t intf = data;
|
|
|
|
return sprintf(out, "%d.%d\n",
|
|
intf->version_major, intf->version_minor);
|
|
}
|
|
|
|
static int stat_file_read_proc(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
char *out = (char *) page;
|
|
ipmi_smi_t intf = data;
|
|
|
|
out += sprintf(out, "sent_invalid_commands: %d\n",
|
|
intf->sent_invalid_commands);
|
|
out += sprintf(out, "sent_local_commands: %d\n",
|
|
intf->sent_local_commands);
|
|
out += sprintf(out, "handled_local_responses: %d\n",
|
|
intf->handled_local_responses);
|
|
out += sprintf(out, "unhandled_local_responses: %d\n",
|
|
intf->unhandled_local_responses);
|
|
out += sprintf(out, "sent_ipmb_commands: %d\n",
|
|
intf->sent_ipmb_commands);
|
|
out += sprintf(out, "sent_ipmb_command_errs: %d\n",
|
|
intf->sent_ipmb_command_errs);
|
|
out += sprintf(out, "retransmitted_ipmb_commands: %d\n",
|
|
intf->retransmitted_ipmb_commands);
|
|
out += sprintf(out, "timed_out_ipmb_commands: %d\n",
|
|
intf->timed_out_ipmb_commands);
|
|
out += sprintf(out, "timed_out_ipmb_broadcasts: %d\n",
|
|
intf->timed_out_ipmb_broadcasts);
|
|
out += sprintf(out, "sent_ipmb_responses: %d\n",
|
|
intf->sent_ipmb_responses);
|
|
out += sprintf(out, "handled_ipmb_responses: %d\n",
|
|
intf->handled_ipmb_responses);
|
|
out += sprintf(out, "invalid_ipmb_responses: %d\n",
|
|
intf->invalid_ipmb_responses);
|
|
out += sprintf(out, "unhandled_ipmb_responses: %d\n",
|
|
intf->unhandled_ipmb_responses);
|
|
out += sprintf(out, "sent_lan_commands: %d\n",
|
|
intf->sent_lan_commands);
|
|
out += sprintf(out, "sent_lan_command_errs: %d\n",
|
|
intf->sent_lan_command_errs);
|
|
out += sprintf(out, "retransmitted_lan_commands: %d\n",
|
|
intf->retransmitted_lan_commands);
|
|
out += sprintf(out, "timed_out_lan_commands: %d\n",
|
|
intf->timed_out_lan_commands);
|
|
out += sprintf(out, "sent_lan_responses: %d\n",
|
|
intf->sent_lan_responses);
|
|
out += sprintf(out, "handled_lan_responses: %d\n",
|
|
intf->handled_lan_responses);
|
|
out += sprintf(out, "invalid_lan_responses: %d\n",
|
|
intf->invalid_lan_responses);
|
|
out += sprintf(out, "unhandled_lan_responses: %d\n",
|
|
intf->unhandled_lan_responses);
|
|
out += sprintf(out, "handled_commands: %d\n",
|
|
intf->handled_commands);
|
|
out += sprintf(out, "invalid_commands: %d\n",
|
|
intf->invalid_commands);
|
|
out += sprintf(out, "unhandled_commands: %d\n",
|
|
intf->unhandled_commands);
|
|
out += sprintf(out, "invalid_events: %d\n",
|
|
intf->invalid_events);
|
|
out += sprintf(out, "events: %d\n",
|
|
intf->events);
|
|
|
|
return (out - ((char *) page));
|
|
}
|
|
|
|
int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
|
|
read_proc_t *read_proc, write_proc_t *write_proc,
|
|
void *data, struct module *owner)
|
|
{
|
|
struct proc_dir_entry *file;
|
|
int rv = 0;
|
|
struct ipmi_proc_entry *entry;
|
|
|
|
/* Create a list element. */
|
|
entry = kmalloc(sizeof(*entry), GFP_KERNEL);
|
|
if (!entry)
|
|
return -ENOMEM;
|
|
entry->name = kmalloc(strlen(name)+1, GFP_KERNEL);
|
|
if (!entry->name) {
|
|
kfree(entry);
|
|
return -ENOMEM;
|
|
}
|
|
strcpy(entry->name, name);
|
|
|
|
file = create_proc_entry(name, 0, smi->proc_dir);
|
|
if (!file) {
|
|
kfree(entry->name);
|
|
kfree(entry);
|
|
rv = -ENOMEM;
|
|
} else {
|
|
file->nlink = 1;
|
|
file->data = data;
|
|
file->read_proc = read_proc;
|
|
file->write_proc = write_proc;
|
|
file->owner = owner;
|
|
|
|
/* Stick it on the list. */
|
|
entry->next = smi->proc_entries;
|
|
smi->proc_entries = entry;
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static int add_proc_entries(ipmi_smi_t smi, int num)
|
|
{
|
|
int rv = 0;
|
|
|
|
sprintf(smi->proc_dir_name, "%d", num);
|
|
smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root);
|
|
if (!smi->proc_dir)
|
|
rv = -ENOMEM;
|
|
else {
|
|
smi->proc_dir->owner = THIS_MODULE;
|
|
}
|
|
|
|
if (rv == 0)
|
|
rv = ipmi_smi_add_proc_entry(smi, "stats",
|
|
stat_file_read_proc, NULL,
|
|
smi, THIS_MODULE);
|
|
|
|
if (rv == 0)
|
|
rv = ipmi_smi_add_proc_entry(smi, "ipmb",
|
|
ipmb_file_read_proc, NULL,
|
|
smi, THIS_MODULE);
|
|
|
|
if (rv == 0)
|
|
rv = ipmi_smi_add_proc_entry(smi, "version",
|
|
version_file_read_proc, NULL,
|
|
smi, THIS_MODULE);
|
|
|
|
return rv;
|
|
}
|
|
|
|
static void remove_proc_entries(ipmi_smi_t smi)
|
|
{
|
|
struct ipmi_proc_entry *entry;
|
|
|
|
while (smi->proc_entries) {
|
|
entry = smi->proc_entries;
|
|
smi->proc_entries = entry->next;
|
|
|
|
remove_proc_entry(entry->name, smi->proc_dir);
|
|
kfree(entry->name);
|
|
kfree(entry);
|
|
}
|
|
remove_proc_entry(smi->proc_dir_name, proc_ipmi_root);
|
|
}
|
|
|
|
static int
|
|
send_channel_info_cmd(ipmi_smi_t intf, int chan)
|
|
{
|
|
struct kernel_ipmi_msg msg;
|
|
unsigned char data[1];
|
|
struct ipmi_system_interface_addr si;
|
|
|
|
si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
|
|
si.channel = IPMI_BMC_CHANNEL;
|
|
si.lun = 0;
|
|
|
|
msg.netfn = IPMI_NETFN_APP_REQUEST;
|
|
msg.cmd = IPMI_GET_CHANNEL_INFO_CMD;
|
|
msg.data = data;
|
|
msg.data_len = 1;
|
|
data[0] = chan;
|
|
return i_ipmi_request(NULL,
|
|
intf,
|
|
(struct ipmi_addr *) &si,
|
|
0,
|
|
&msg,
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
0,
|
|
intf->my_address,
|
|
intf->my_lun,
|
|
-1, 0);
|
|
}
|
|
|
|
static void
|
|
channel_handler(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
|
|
{
|
|
int rv = 0;
|
|
int chan;
|
|
|
|
if ((msg->rsp[0] == (IPMI_NETFN_APP_RESPONSE << 2))
|
|
&& (msg->rsp[1] == IPMI_GET_CHANNEL_INFO_CMD))
|
|
{
|
|
/* It's the one we want */
|
|
if (msg->rsp[2] != 0) {
|
|
/* Got an error from the channel, just go on. */
|
|
|
|
if (msg->rsp[2] == IPMI_INVALID_COMMAND_ERR) {
|
|
/* If the MC does not support this
|
|
command, that is legal. We just
|
|
assume it has one IPMB at channel
|
|
zero. */
|
|
intf->channels[0].medium
|
|
= IPMI_CHANNEL_MEDIUM_IPMB;
|
|
intf->channels[0].protocol
|
|
= IPMI_CHANNEL_PROTOCOL_IPMB;
|
|
rv = -ENOSYS;
|
|
|
|
intf->curr_channel = IPMI_MAX_CHANNELS;
|
|
wake_up(&intf->waitq);
|
|
goto out;
|
|
}
|
|
goto next_channel;
|
|
}
|
|
if (msg->rsp_size < 6) {
|
|
/* Message not big enough, just go on. */
|
|
goto next_channel;
|
|
}
|
|
chan = intf->curr_channel;
|
|
intf->channels[chan].medium = msg->rsp[4] & 0x7f;
|
|
intf->channels[chan].protocol = msg->rsp[5] & 0x1f;
|
|
|
|
next_channel:
|
|
intf->curr_channel++;
|
|
if (intf->curr_channel >= IPMI_MAX_CHANNELS)
|
|
wake_up(&intf->waitq);
|
|
else
|
|
rv = send_channel_info_cmd(intf, intf->curr_channel);
|
|
|
|
if (rv) {
|
|
/* Got an error somehow, just give up. */
|
|
intf->curr_channel = IPMI_MAX_CHANNELS;
|
|
wake_up(&intf->waitq);
|
|
|
|
printk(KERN_WARNING PFX
|
|
"Error sending channel information: %d\n",
|
|
rv);
|
|
}
|
|
}
|
|
out:
|
|
return;
|
|
}
|
|
|
|
int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
|
|
void *send_info,
|
|
unsigned char version_major,
|
|
unsigned char version_minor,
|
|
unsigned char slave_addr,
|
|
ipmi_smi_t *intf)
|
|
{
|
|
int i, j;
|
|
int rv;
|
|
ipmi_smi_t new_intf;
|
|
unsigned long flags;
|
|
|
|
|
|
/* Make sure the driver is actually initialized, this handles
|
|
problems with initialization order. */
|
|
if (!initialized) {
|
|
rv = ipmi_init_msghandler();
|
|
if (rv)
|
|
return rv;
|
|
/* The init code doesn't return an error if it was turned
|
|
off, but it won't initialize. Check that. */
|
|
if (!initialized)
|
|
return -ENODEV;
|
|
}
|
|
|
|
new_intf = kmalloc(sizeof(*new_intf), GFP_KERNEL);
|
|
if (!new_intf)
|
|
return -ENOMEM;
|
|
memset(new_intf, 0, sizeof(*new_intf));
|
|
|
|
new_intf->proc_dir = NULL;
|
|
|
|
rv = -ENOMEM;
|
|
|
|
down_write(&interfaces_sem);
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
if (ipmi_interfaces[i] == NULL) {
|
|
new_intf->intf_num = i;
|
|
new_intf->version_major = version_major;
|
|
new_intf->version_minor = version_minor;
|
|
if (slave_addr == 0)
|
|
new_intf->my_address = IPMI_BMC_SLAVE_ADDR;
|
|
else
|
|
new_intf->my_address = slave_addr;
|
|
new_intf->my_lun = 2; /* the SMS LUN. */
|
|
rwlock_init(&(new_intf->users_lock));
|
|
INIT_LIST_HEAD(&(new_intf->users));
|
|
new_intf->handlers = handlers;
|
|
new_intf->send_info = send_info;
|
|
spin_lock_init(&(new_intf->seq_lock));
|
|
for (j=0; j<IPMI_IPMB_NUM_SEQ; j++) {
|
|
new_intf->seq_table[j].inuse = 0;
|
|
new_intf->seq_table[j].seqid = 0;
|
|
}
|
|
new_intf->curr_seq = 0;
|
|
spin_lock_init(&(new_intf->waiting_msgs_lock));
|
|
INIT_LIST_HEAD(&(new_intf->waiting_msgs));
|
|
spin_lock_init(&(new_intf->events_lock));
|
|
INIT_LIST_HEAD(&(new_intf->waiting_events));
|
|
new_intf->waiting_events_count = 0;
|
|
rwlock_init(&(new_intf->cmd_rcvr_lock));
|
|
init_waitqueue_head(&new_intf->waitq);
|
|
INIT_LIST_HEAD(&(new_intf->cmd_rcvrs));
|
|
new_intf->all_cmd_rcvr = NULL;
|
|
|
|
spin_lock_init(&(new_intf->counter_lock));
|
|
|
|
spin_lock_irqsave(&interfaces_lock, flags);
|
|
ipmi_interfaces[i] = new_intf;
|
|
spin_unlock_irqrestore(&interfaces_lock, flags);
|
|
|
|
rv = 0;
|
|
*intf = new_intf;
|
|
break;
|
|
}
|
|
}
|
|
|
|
downgrade_write(&interfaces_sem);
|
|
|
|
if (rv == 0)
|
|
rv = add_proc_entries(*intf, i);
|
|
|
|
if (rv == 0) {
|
|
if ((version_major > 1)
|
|
|| ((version_major == 1) && (version_minor >= 5)))
|
|
{
|
|
/* Start scanning the channels to see what is
|
|
available. */
|
|
(*intf)->null_user_handler = channel_handler;
|
|
(*intf)->curr_channel = 0;
|
|
rv = send_channel_info_cmd(*intf, 0);
|
|
if (rv)
|
|
goto out;
|
|
|
|
/* Wait for the channel info to be read. */
|
|
up_read(&interfaces_sem);
|
|
wait_event((*intf)->waitq,
|
|
((*intf)->curr_channel>=IPMI_MAX_CHANNELS));
|
|
down_read(&interfaces_sem);
|
|
|
|
if (ipmi_interfaces[i] != new_intf)
|
|
/* Well, it went away. Just return. */
|
|
goto out;
|
|
} else {
|
|
/* Assume a single IPMB channel at zero. */
|
|
(*intf)->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB;
|
|
(*intf)->channels[0].protocol
|
|
= IPMI_CHANNEL_PROTOCOL_IPMB;
|
|
}
|
|
|
|
/* Call all the watcher interfaces to tell
|
|
them that a new interface is available. */
|
|
call_smi_watchers(i);
|
|
}
|
|
|
|
out:
|
|
up_read(&interfaces_sem);
|
|
|
|
if (rv) {
|
|
if (new_intf->proc_dir)
|
|
remove_proc_entries(new_intf);
|
|
kfree(new_intf);
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static void free_recv_msg_list(struct list_head *q)
|
|
{
|
|
struct ipmi_recv_msg *msg, *msg2;
|
|
|
|
list_for_each_entry_safe(msg, msg2, q, link) {
|
|
list_del(&msg->link);
|
|
ipmi_free_recv_msg(msg);
|
|
}
|
|
}
|
|
|
|
static void free_cmd_rcvr_list(struct list_head *q)
|
|
{
|
|
struct cmd_rcvr *rcvr, *rcvr2;
|
|
|
|
list_for_each_entry_safe(rcvr, rcvr2, q, link) {
|
|
list_del(&rcvr->link);
|
|
kfree(rcvr);
|
|
}
|
|
}
|
|
|
|
static void clean_up_interface_data(ipmi_smi_t intf)
|
|
{
|
|
int i;
|
|
|
|
free_recv_msg_list(&(intf->waiting_msgs));
|
|
free_recv_msg_list(&(intf->waiting_events));
|
|
free_cmd_rcvr_list(&(intf->cmd_rcvrs));
|
|
|
|
for (i=0; i<IPMI_IPMB_NUM_SEQ; i++) {
|
|
if ((intf->seq_table[i].inuse)
|
|
&& (intf->seq_table[i].recv_msg))
|
|
{
|
|
ipmi_free_recv_msg(intf->seq_table[i].recv_msg);
|
|
}
|
|
}
|
|
}
|
|
|
|
int ipmi_unregister_smi(ipmi_smi_t intf)
|
|
{
|
|
int rv = -ENODEV;
|
|
int i;
|
|
struct ipmi_smi_watcher *w;
|
|
unsigned long flags;
|
|
|
|
down_write(&interfaces_sem);
|
|
if (list_empty(&(intf->users)))
|
|
{
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
if (ipmi_interfaces[i] == intf) {
|
|
remove_proc_entries(intf);
|
|
spin_lock_irqsave(&interfaces_lock, flags);
|
|
ipmi_interfaces[i] = NULL;
|
|
clean_up_interface_data(intf);
|
|
spin_unlock_irqrestore(&interfaces_lock,flags);
|
|
kfree(intf);
|
|
rv = 0;
|
|
goto out_call_watcher;
|
|
}
|
|
}
|
|
} else {
|
|
rv = -EBUSY;
|
|
}
|
|
up_write(&interfaces_sem);
|
|
|
|
return rv;
|
|
|
|
out_call_watcher:
|
|
downgrade_write(&interfaces_sem);
|
|
|
|
/* Call all the watcher interfaces to tell them that
|
|
an interface is gone. */
|
|
down_read(&smi_watchers_sem);
|
|
list_for_each_entry(w, &smi_watchers, link) {
|
|
w->smi_gone(i);
|
|
}
|
|
up_read(&smi_watchers_sem);
|
|
up_read(&interfaces_sem);
|
|
return 0;
|
|
}
|
|
|
|
static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
struct ipmi_ipmb_addr ipmb_addr;
|
|
struct ipmi_recv_msg *recv_msg;
|
|
unsigned long flags;
|
|
|
|
|
|
/* This is 11, not 10, because the response must contain a
|
|
* completion code. */
|
|
if (msg->rsp_size < 11) {
|
|
/* Message not big enough, just ignore it. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->invalid_ipmb_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (msg->rsp[2] != 0) {
|
|
/* An error getting the response, just ignore it. */
|
|
return 0;
|
|
}
|
|
|
|
ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE;
|
|
ipmb_addr.slave_addr = msg->rsp[6];
|
|
ipmb_addr.channel = msg->rsp[3] & 0x0f;
|
|
ipmb_addr.lun = msg->rsp[7] & 3;
|
|
|
|
/* It's a response from a remote entity. Look up the sequence
|
|
number and handle the response. */
|
|
if (intf_find_seq(intf,
|
|
msg->rsp[7] >> 2,
|
|
msg->rsp[3] & 0x0f,
|
|
msg->rsp[8],
|
|
(msg->rsp[4] >> 2) & (~1),
|
|
(struct ipmi_addr *) &(ipmb_addr),
|
|
&recv_msg))
|
|
{
|
|
/* We were unable to find the sequence number,
|
|
so just nuke the message. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->unhandled_ipmb_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
memcpy(recv_msg->msg_data,
|
|
&(msg->rsp[9]),
|
|
msg->rsp_size - 9);
|
|
/* THe other fields matched, so no need to set them, except
|
|
for netfn, which needs to be the response that was
|
|
returned, not the request value. */
|
|
recv_msg->msg.netfn = msg->rsp[4] >> 2;
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
recv_msg->msg.data_len = msg->rsp_size - 10;
|
|
recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->handled_ipmb_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
deliver_response(recv_msg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
struct cmd_rcvr *rcvr;
|
|
int rv = 0;
|
|
unsigned char netfn;
|
|
unsigned char cmd;
|
|
ipmi_user_t user = NULL;
|
|
struct ipmi_ipmb_addr *ipmb_addr;
|
|
struct ipmi_recv_msg *recv_msg;
|
|
unsigned long flags;
|
|
|
|
if (msg->rsp_size < 10) {
|
|
/* Message not big enough, just ignore it. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (msg->rsp[2] != 0) {
|
|
/* An error getting the response, just ignore it. */
|
|
return 0;
|
|
}
|
|
|
|
netfn = msg->rsp[4] >> 2;
|
|
cmd = msg->rsp[8];
|
|
|
|
read_lock(&(intf->cmd_rcvr_lock));
|
|
|
|
if (intf->all_cmd_rcvr) {
|
|
user = intf->all_cmd_rcvr;
|
|
} else {
|
|
/* Find the command/netfn. */
|
|
list_for_each_entry(rcvr, &(intf->cmd_rcvrs), link) {
|
|
if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)) {
|
|
user = rcvr->user;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
read_unlock(&(intf->cmd_rcvr_lock));
|
|
|
|
if (user == NULL) {
|
|
/* We didn't find a user, deliver an error response. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->unhandled_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
|
|
msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
msg->data[1] = IPMI_SEND_MSG_CMD;
|
|
msg->data[2] = msg->rsp[3];
|
|
msg->data[3] = msg->rsp[6];
|
|
msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3);
|
|
msg->data[5] = ipmb_checksum(&(msg->data[3]), 2);
|
|
msg->data[6] = intf->my_address;
|
|
/* rqseq/lun */
|
|
msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3);
|
|
msg->data[8] = msg->rsp[8]; /* cmd */
|
|
msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE;
|
|
msg->data[10] = ipmb_checksum(&(msg->data[6]), 4);
|
|
msg->data_size = 11;
|
|
|
|
#ifdef DEBUG_MSGING
|
|
{
|
|
int m;
|
|
printk("Invalid command:");
|
|
for (m=0; m<msg->data_size; m++)
|
|
printk(" %2.2x", msg->data[m]);
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
intf->handlers->sender(intf->send_info, msg, 0);
|
|
|
|
rv = -1; /* We used the message, so return the value that
|
|
causes it to not be freed or queued. */
|
|
} else {
|
|
/* Deliver the message to the user. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->handled_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
|
|
recv_msg = ipmi_alloc_recv_msg();
|
|
if (! recv_msg) {
|
|
/* We couldn't allocate memory for the
|
|
message, so requeue it for handling
|
|
later. */
|
|
rv = 1;
|
|
} else {
|
|
/* Extract the source address from the data. */
|
|
ipmb_addr = (struct ipmi_ipmb_addr *) &recv_msg->addr;
|
|
ipmb_addr->addr_type = IPMI_IPMB_ADDR_TYPE;
|
|
ipmb_addr->slave_addr = msg->rsp[6];
|
|
ipmb_addr->lun = msg->rsp[7] & 3;
|
|
ipmb_addr->channel = msg->rsp[3] & 0xf;
|
|
|
|
/* Extract the rest of the message information
|
|
from the IPMB header.*/
|
|
recv_msg->user = user;
|
|
recv_msg->recv_type = IPMI_CMD_RECV_TYPE;
|
|
recv_msg->msgid = msg->rsp[7] >> 2;
|
|
recv_msg->msg.netfn = msg->rsp[4] >> 2;
|
|
recv_msg->msg.cmd = msg->rsp[8];
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
|
|
/* We chop off 10, not 9 bytes because the checksum
|
|
at the end also needs to be removed. */
|
|
recv_msg->msg.data_len = msg->rsp_size - 10;
|
|
memcpy(recv_msg->msg_data,
|
|
&(msg->rsp[9]),
|
|
msg->rsp_size - 10);
|
|
deliver_response(recv_msg);
|
|
}
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static int handle_lan_get_msg_rsp(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
struct ipmi_lan_addr lan_addr;
|
|
struct ipmi_recv_msg *recv_msg;
|
|
unsigned long flags;
|
|
|
|
|
|
/* This is 13, not 12, because the response must contain a
|
|
* completion code. */
|
|
if (msg->rsp_size < 13) {
|
|
/* Message not big enough, just ignore it. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->invalid_lan_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (msg->rsp[2] != 0) {
|
|
/* An error getting the response, just ignore it. */
|
|
return 0;
|
|
}
|
|
|
|
lan_addr.addr_type = IPMI_LAN_ADDR_TYPE;
|
|
lan_addr.session_handle = msg->rsp[4];
|
|
lan_addr.remote_SWID = msg->rsp[8];
|
|
lan_addr.local_SWID = msg->rsp[5];
|
|
lan_addr.channel = msg->rsp[3] & 0x0f;
|
|
lan_addr.privilege = msg->rsp[3] >> 4;
|
|
lan_addr.lun = msg->rsp[9] & 3;
|
|
|
|
/* It's a response from a remote entity. Look up the sequence
|
|
number and handle the response. */
|
|
if (intf_find_seq(intf,
|
|
msg->rsp[9] >> 2,
|
|
msg->rsp[3] & 0x0f,
|
|
msg->rsp[10],
|
|
(msg->rsp[6] >> 2) & (~1),
|
|
(struct ipmi_addr *) &(lan_addr),
|
|
&recv_msg))
|
|
{
|
|
/* We were unable to find the sequence number,
|
|
so just nuke the message. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->unhandled_lan_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
memcpy(recv_msg->msg_data,
|
|
&(msg->rsp[11]),
|
|
msg->rsp_size - 11);
|
|
/* The other fields matched, so no need to set them, except
|
|
for netfn, which needs to be the response that was
|
|
returned, not the request value. */
|
|
recv_msg->msg.netfn = msg->rsp[6] >> 2;
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
recv_msg->msg.data_len = msg->rsp_size - 12;
|
|
recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->handled_lan_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
deliver_response(recv_msg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int handle_lan_get_msg_cmd(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
struct cmd_rcvr *rcvr;
|
|
int rv = 0;
|
|
unsigned char netfn;
|
|
unsigned char cmd;
|
|
ipmi_user_t user = NULL;
|
|
struct ipmi_lan_addr *lan_addr;
|
|
struct ipmi_recv_msg *recv_msg;
|
|
unsigned long flags;
|
|
|
|
if (msg->rsp_size < 12) {
|
|
/* Message not big enough, just ignore it. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->invalid_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (msg->rsp[2] != 0) {
|
|
/* An error getting the response, just ignore it. */
|
|
return 0;
|
|
}
|
|
|
|
netfn = msg->rsp[6] >> 2;
|
|
cmd = msg->rsp[10];
|
|
|
|
read_lock(&(intf->cmd_rcvr_lock));
|
|
|
|
if (intf->all_cmd_rcvr) {
|
|
user = intf->all_cmd_rcvr;
|
|
} else {
|
|
/* Find the command/netfn. */
|
|
list_for_each_entry(rcvr, &(intf->cmd_rcvrs), link) {
|
|
if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)) {
|
|
user = rcvr->user;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
read_unlock(&(intf->cmd_rcvr_lock));
|
|
|
|
if (user == NULL) {
|
|
/* We didn't find a user, deliver an error response. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->unhandled_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
|
|
rv = 0; /* Don't do anything with these messages, just
|
|
allow them to be freed. */
|
|
} else {
|
|
/* Deliver the message to the user. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->handled_commands++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
|
|
recv_msg = ipmi_alloc_recv_msg();
|
|
if (! recv_msg) {
|
|
/* We couldn't allocate memory for the
|
|
message, so requeue it for handling
|
|
later. */
|
|
rv = 1;
|
|
} else {
|
|
/* Extract the source address from the data. */
|
|
lan_addr = (struct ipmi_lan_addr *) &recv_msg->addr;
|
|
lan_addr->addr_type = IPMI_LAN_ADDR_TYPE;
|
|
lan_addr->session_handle = msg->rsp[4];
|
|
lan_addr->remote_SWID = msg->rsp[8];
|
|
lan_addr->local_SWID = msg->rsp[5];
|
|
lan_addr->lun = msg->rsp[9] & 3;
|
|
lan_addr->channel = msg->rsp[3] & 0xf;
|
|
lan_addr->privilege = msg->rsp[3] >> 4;
|
|
|
|
/* Extract the rest of the message information
|
|
from the IPMB header.*/
|
|
recv_msg->user = user;
|
|
recv_msg->recv_type = IPMI_CMD_RECV_TYPE;
|
|
recv_msg->msgid = msg->rsp[9] >> 2;
|
|
recv_msg->msg.netfn = msg->rsp[6] >> 2;
|
|
recv_msg->msg.cmd = msg->rsp[10];
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
|
|
/* We chop off 12, not 11 bytes because the checksum
|
|
at the end also needs to be removed. */
|
|
recv_msg->msg.data_len = msg->rsp_size - 12;
|
|
memcpy(recv_msg->msg_data,
|
|
&(msg->rsp[11]),
|
|
msg->rsp_size - 12);
|
|
deliver_response(recv_msg);
|
|
}
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
struct ipmi_system_interface_addr *smi_addr;
|
|
|
|
recv_msg->msgid = 0;
|
|
smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr);
|
|
smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
|
|
smi_addr->channel = IPMI_BMC_CHANNEL;
|
|
smi_addr->lun = msg->rsp[0] & 3;
|
|
recv_msg->recv_type = IPMI_ASYNC_EVENT_RECV_TYPE;
|
|
recv_msg->msg.netfn = msg->rsp[0] >> 2;
|
|
recv_msg->msg.cmd = msg->rsp[1];
|
|
memcpy(recv_msg->msg_data, &(msg->rsp[3]), msg->rsp_size - 3);
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
recv_msg->msg.data_len = msg->rsp_size - 3;
|
|
}
|
|
|
|
/* This will be called with the intf->users_lock read-locked, so no need
|
|
to do that here. */
|
|
static int handle_read_event_rsp(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
struct ipmi_recv_msg *recv_msg, *recv_msg2;
|
|
struct list_head msgs;
|
|
ipmi_user_t user;
|
|
int rv = 0;
|
|
int deliver_count = 0;
|
|
unsigned long flags;
|
|
|
|
if (msg->rsp_size < 19) {
|
|
/* Message is too small to be an IPMB event. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->invalid_events++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (msg->rsp[2] != 0) {
|
|
/* An error getting the event, just ignore it. */
|
|
return 0;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&msgs);
|
|
|
|
spin_lock_irqsave(&(intf->events_lock), flags);
|
|
|
|
spin_lock(&intf->counter_lock);
|
|
intf->events++;
|
|
spin_unlock(&intf->counter_lock);
|
|
|
|
/* Allocate and fill in one message for every user that is getting
|
|
events. */
|
|
list_for_each_entry(user, &(intf->users), link) {
|
|
if (! user->gets_events)
|
|
continue;
|
|
|
|
recv_msg = ipmi_alloc_recv_msg();
|
|
if (! recv_msg) {
|
|
list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) {
|
|
list_del(&recv_msg->link);
|
|
ipmi_free_recv_msg(recv_msg);
|
|
}
|
|
/* We couldn't allocate memory for the
|
|
message, so requeue it for handling
|
|
later. */
|
|
rv = 1;
|
|
goto out;
|
|
}
|
|
|
|
deliver_count++;
|
|
|
|
copy_event_into_recv_msg(recv_msg, msg);
|
|
recv_msg->user = user;
|
|
list_add_tail(&(recv_msg->link), &msgs);
|
|
}
|
|
|
|
if (deliver_count) {
|
|
/* Now deliver all the messages. */
|
|
list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) {
|
|
list_del(&recv_msg->link);
|
|
deliver_response(recv_msg);
|
|
}
|
|
} else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) {
|
|
/* No one to receive the message, put it in queue if there's
|
|
not already too many things in the queue. */
|
|
recv_msg = ipmi_alloc_recv_msg();
|
|
if (! recv_msg) {
|
|
/* We couldn't allocate memory for the
|
|
message, so requeue it for handling
|
|
later. */
|
|
rv = 1;
|
|
goto out;
|
|
}
|
|
|
|
copy_event_into_recv_msg(recv_msg, msg);
|
|
list_add_tail(&(recv_msg->link), &(intf->waiting_events));
|
|
} else {
|
|
/* There's too many things in the queue, discard this
|
|
message. */
|
|
printk(KERN_WARNING PFX "Event queue full, discarding an"
|
|
" incoming event\n");
|
|
}
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&(intf->events_lock), flags);
|
|
|
|
return rv;
|
|
}
|
|
|
|
static int handle_bmc_rsp(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
struct ipmi_recv_msg *recv_msg;
|
|
int found = 0;
|
|
struct ipmi_user *user;
|
|
unsigned long flags;
|
|
|
|
recv_msg = (struct ipmi_recv_msg *) msg->user_data;
|
|
|
|
/* Make sure the user still exists. */
|
|
list_for_each_entry(user, &(intf->users), link) {
|
|
if (user == recv_msg->user) {
|
|
/* Found it, so we can deliver it */
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found) {
|
|
/* Special handling for NULL users. */
|
|
if (!recv_msg->user && intf->null_user_handler){
|
|
intf->null_user_handler(intf, msg);
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->handled_local_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
}else{
|
|
/* The user for the message went away, so give up. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->unhandled_local_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
}
|
|
ipmi_free_recv_msg(recv_msg);
|
|
} else {
|
|
struct ipmi_system_interface_addr *smi_addr;
|
|
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
intf->handled_local_responses++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
|
|
recv_msg->msgid = msg->msgid;
|
|
smi_addr = ((struct ipmi_system_interface_addr *)
|
|
&(recv_msg->addr));
|
|
smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
|
|
smi_addr->channel = IPMI_BMC_CHANNEL;
|
|
smi_addr->lun = msg->rsp[0] & 3;
|
|
recv_msg->msg.netfn = msg->rsp[0] >> 2;
|
|
recv_msg->msg.cmd = msg->rsp[1];
|
|
memcpy(recv_msg->msg_data,
|
|
&(msg->rsp[2]),
|
|
msg->rsp_size - 2);
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
recv_msg->msg.data_len = msg->rsp_size - 2;
|
|
deliver_response(recv_msg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Handle a new message. Return 1 if the message should be requeued,
|
|
0 if the message should be freed, or -1 if the message should not
|
|
be freed or requeued. */
|
|
static int handle_new_recv_msg(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
int requeue;
|
|
int chan;
|
|
|
|
#ifdef DEBUG_MSGING
|
|
int m;
|
|
printk("Recv:");
|
|
for (m=0; m<msg->rsp_size; m++)
|
|
printk(" %2.2x", msg->rsp[m]);
|
|
printk("\n");
|
|
#endif
|
|
if (msg->rsp_size < 2) {
|
|
/* Message is too small to be correct. */
|
|
printk(KERN_WARNING PFX "BMC returned to small a message"
|
|
" for netfn %x cmd %x, got %d bytes\n",
|
|
(msg->data[0] >> 2) | 1, msg->data[1], msg->rsp_size);
|
|
|
|
/* Generate an error response for the message. */
|
|
msg->rsp[0] = msg->data[0] | (1 << 2);
|
|
msg->rsp[1] = msg->data[1];
|
|
msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
|
|
msg->rsp_size = 3;
|
|
} else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))/* Netfn */
|
|
|| (msg->rsp[1] != msg->data[1])) /* Command */
|
|
{
|
|
/* The response is not even marginally correct. */
|
|
printk(KERN_WARNING PFX "BMC returned incorrect response,"
|
|
" expected netfn %x cmd %x, got netfn %x cmd %x\n",
|
|
(msg->data[0] >> 2) | 1, msg->data[1],
|
|
msg->rsp[0] >> 2, msg->rsp[1]);
|
|
|
|
/* Generate an error response for the message. */
|
|
msg->rsp[0] = msg->data[0] | (1 << 2);
|
|
msg->rsp[1] = msg->data[1];
|
|
msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
|
|
msg->rsp_size = 3;
|
|
}
|
|
|
|
if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
|
|
&& (msg->rsp[1] == IPMI_SEND_MSG_CMD)
|
|
&& (msg->user_data != NULL))
|
|
{
|
|
/* It's a response to a response we sent. For this we
|
|
deliver a send message response to the user. */
|
|
struct ipmi_recv_msg *recv_msg = msg->user_data;
|
|
|
|
requeue = 0;
|
|
if (msg->rsp_size < 2)
|
|
/* Message is too small to be correct. */
|
|
goto out;
|
|
|
|
chan = msg->data[2] & 0x0f;
|
|
if (chan >= IPMI_MAX_CHANNELS)
|
|
/* Invalid channel number */
|
|
goto out;
|
|
|
|
if (recv_msg) {
|
|
recv_msg->recv_type = IPMI_RESPONSE_RESPONSE_TYPE;
|
|
recv_msg->msg.data = recv_msg->msg_data;
|
|
recv_msg->msg.data_len = 1;
|
|
recv_msg->msg_data[0] = msg->rsp[2];
|
|
deliver_response(recv_msg);
|
|
}
|
|
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
|
|
&& (msg->rsp[1] == IPMI_GET_MSG_CMD))
|
|
{
|
|
/* It's from the receive queue. */
|
|
chan = msg->rsp[3] & 0xf;
|
|
if (chan >= IPMI_MAX_CHANNELS) {
|
|
/* Invalid channel number */
|
|
requeue = 0;
|
|
goto out;
|
|
}
|
|
|
|
switch (intf->channels[chan].medium) {
|
|
case IPMI_CHANNEL_MEDIUM_IPMB:
|
|
if (msg->rsp[4] & 0x04) {
|
|
/* It's a response, so find the
|
|
requesting message and send it up. */
|
|
requeue = handle_ipmb_get_msg_rsp(intf, msg);
|
|
} else {
|
|
/* It's a command to the SMS from some other
|
|
entity. Handle that. */
|
|
requeue = handle_ipmb_get_msg_cmd(intf, msg);
|
|
}
|
|
break;
|
|
|
|
case IPMI_CHANNEL_MEDIUM_8023LAN:
|
|
case IPMI_CHANNEL_MEDIUM_ASYNC:
|
|
if (msg->rsp[6] & 0x04) {
|
|
/* It's a response, so find the
|
|
requesting message and send it up. */
|
|
requeue = handle_lan_get_msg_rsp(intf, msg);
|
|
} else {
|
|
/* It's a command to the SMS from some other
|
|
entity. Handle that. */
|
|
requeue = handle_lan_get_msg_cmd(intf, msg);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
/* We don't handle the channel type, so just
|
|
* free the message. */
|
|
requeue = 0;
|
|
}
|
|
|
|
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
|
|
&& (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD))
|
|
{
|
|
/* It's an asyncronous event. */
|
|
requeue = handle_read_event_rsp(intf, msg);
|
|
} else {
|
|
/* It's a response from the local BMC. */
|
|
requeue = handle_bmc_rsp(intf, msg);
|
|
}
|
|
|
|
out:
|
|
return requeue;
|
|
}
|
|
|
|
/* Handle a new message from the lower layer. */
|
|
void ipmi_smi_msg_received(ipmi_smi_t intf,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
unsigned long flags;
|
|
int rv;
|
|
|
|
|
|
/* Lock the user lock so the user can't go away while we are
|
|
working on it. */
|
|
read_lock(&(intf->users_lock));
|
|
|
|
if ((msg->data_size >= 2)
|
|
&& (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2))
|
|
&& (msg->data[1] == IPMI_SEND_MSG_CMD)
|
|
&& (msg->user_data == NULL)) {
|
|
/* This is the local response to a command send, start
|
|
the timer for these. The user_data will not be
|
|
NULL if this is a response send, and we will let
|
|
response sends just go through. */
|
|
|
|
/* Check for errors, if we get certain errors (ones
|
|
that mean basically we can try again later), we
|
|
ignore them and start the timer. Otherwise we
|
|
report the error immediately. */
|
|
if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0)
|
|
&& (msg->rsp[2] != IPMI_NODE_BUSY_ERR)
|
|
&& (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR))
|
|
{
|
|
int chan = msg->rsp[3] & 0xf;
|
|
|
|
/* Got an error sending the message, handle it. */
|
|
spin_lock_irqsave(&intf->counter_lock, flags);
|
|
if (chan >= IPMI_MAX_CHANNELS)
|
|
; /* This shouldn't happen */
|
|
else if ((intf->channels[chan].medium
|
|
== IPMI_CHANNEL_MEDIUM_8023LAN)
|
|
|| (intf->channels[chan].medium
|
|
== IPMI_CHANNEL_MEDIUM_ASYNC))
|
|
intf->sent_lan_command_errs++;
|
|
else
|
|
intf->sent_ipmb_command_errs++;
|
|
spin_unlock_irqrestore(&intf->counter_lock, flags);
|
|
intf_err_seq(intf, msg->msgid, msg->rsp[2]);
|
|
} else {
|
|
/* The message was sent, start the timer. */
|
|
intf_start_seq_timer(intf, msg->msgid);
|
|
}
|
|
|
|
ipmi_free_smi_msg(msg);
|
|
goto out_unlock;
|
|
}
|
|
|
|
/* To preserve message order, if the list is not empty, we
|
|
tack this message onto the end of the list. */
|
|
spin_lock_irqsave(&(intf->waiting_msgs_lock), flags);
|
|
if (!list_empty(&(intf->waiting_msgs))) {
|
|
list_add_tail(&(msg->link), &(intf->waiting_msgs));
|
|
spin_unlock(&(intf->waiting_msgs_lock));
|
|
goto out_unlock;
|
|
}
|
|
spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
|
|
|
|
rv = handle_new_recv_msg(intf, msg);
|
|
if (rv > 0) {
|
|
/* Could not handle the message now, just add it to a
|
|
list to handle later. */
|
|
spin_lock(&(intf->waiting_msgs_lock));
|
|
list_add_tail(&(msg->link), &(intf->waiting_msgs));
|
|
spin_unlock(&(intf->waiting_msgs_lock));
|
|
} else if (rv == 0) {
|
|
ipmi_free_smi_msg(msg);
|
|
}
|
|
|
|
out_unlock:
|
|
read_unlock(&(intf->users_lock));
|
|
}
|
|
|
|
void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf)
|
|
{
|
|
ipmi_user_t user;
|
|
|
|
read_lock(&(intf->users_lock));
|
|
list_for_each_entry(user, &(intf->users), link) {
|
|
if (! user->handler->ipmi_watchdog_pretimeout)
|
|
continue;
|
|
|
|
user->handler->ipmi_watchdog_pretimeout(user->handler_data);
|
|
}
|
|
read_unlock(&(intf->users_lock));
|
|
}
|
|
|
|
static void
|
|
handle_msg_timeout(struct ipmi_recv_msg *msg)
|
|
{
|
|
msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
|
|
msg->msg_data[0] = IPMI_TIMEOUT_COMPLETION_CODE;
|
|
msg->msg.netfn |= 1; /* Convert to a response. */
|
|
msg->msg.data_len = 1;
|
|
msg->msg.data = msg->msg_data;
|
|
deliver_response(msg);
|
|
}
|
|
|
|
static struct ipmi_smi_msg *
|
|
smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg,
|
|
unsigned char seq, long seqid)
|
|
{
|
|
struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg();
|
|
if (!smi_msg)
|
|
/* If we can't allocate the message, then just return, we
|
|
get 4 retries, so this should be ok. */
|
|
return NULL;
|
|
|
|
memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len);
|
|
smi_msg->data_size = recv_msg->msg.data_len;
|
|
smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid);
|
|
|
|
#ifdef DEBUG_MSGING
|
|
{
|
|
int m;
|
|
printk("Resend: ");
|
|
for (m=0; m<smi_msg->data_size; m++)
|
|
printk(" %2.2x", smi_msg->data[m]);
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
return smi_msg;
|
|
}
|
|
|
|
static void
|
|
ipmi_timeout_handler(long timeout_period)
|
|
{
|
|
ipmi_smi_t intf;
|
|
struct list_head timeouts;
|
|
struct ipmi_recv_msg *msg, *msg2;
|
|
struct ipmi_smi_msg *smi_msg, *smi_msg2;
|
|
unsigned long flags;
|
|
int i, j;
|
|
|
|
INIT_LIST_HEAD(&timeouts);
|
|
|
|
spin_lock(&interfaces_lock);
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
intf = ipmi_interfaces[i];
|
|
if (intf == NULL)
|
|
continue;
|
|
|
|
read_lock(&(intf->users_lock));
|
|
|
|
/* See if any waiting messages need to be processed. */
|
|
spin_lock_irqsave(&(intf->waiting_msgs_lock), flags);
|
|
list_for_each_entry_safe(smi_msg, smi_msg2, &(intf->waiting_msgs), link) {
|
|
if (! handle_new_recv_msg(intf, smi_msg)) {
|
|
list_del(&smi_msg->link);
|
|
ipmi_free_smi_msg(smi_msg);
|
|
} else {
|
|
/* To preserve message order, quit if we
|
|
can't handle a message. */
|
|
break;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
|
|
|
|
/* Go through the seq table and find any messages that
|
|
have timed out, putting them in the timeouts
|
|
list. */
|
|
spin_lock_irqsave(&(intf->seq_lock), flags);
|
|
for (j=0; j<IPMI_IPMB_NUM_SEQ; j++) {
|
|
struct seq_table *ent = &(intf->seq_table[j]);
|
|
if (!ent->inuse)
|
|
continue;
|
|
|
|
ent->timeout -= timeout_period;
|
|
if (ent->timeout > 0)
|
|
continue;
|
|
|
|
if (ent->retries_left == 0) {
|
|
/* The message has used all its retries. */
|
|
ent->inuse = 0;
|
|
msg = ent->recv_msg;
|
|
list_add_tail(&(msg->link), &timeouts);
|
|
spin_lock(&intf->counter_lock);
|
|
if (ent->broadcast)
|
|
intf->timed_out_ipmb_broadcasts++;
|
|
else if (ent->recv_msg->addr.addr_type
|
|
== IPMI_LAN_ADDR_TYPE)
|
|
intf->timed_out_lan_commands++;
|
|
else
|
|
intf->timed_out_ipmb_commands++;
|
|
spin_unlock(&intf->counter_lock);
|
|
} else {
|
|
struct ipmi_smi_msg *smi_msg;
|
|
/* More retries, send again. */
|
|
|
|
/* Start with the max timer, set to normal
|
|
timer after the message is sent. */
|
|
ent->timeout = MAX_MSG_TIMEOUT;
|
|
ent->retries_left--;
|
|
spin_lock(&intf->counter_lock);
|
|
if (ent->recv_msg->addr.addr_type
|
|
== IPMI_LAN_ADDR_TYPE)
|
|
intf->retransmitted_lan_commands++;
|
|
else
|
|
intf->retransmitted_ipmb_commands++;
|
|
spin_unlock(&intf->counter_lock);
|
|
smi_msg = smi_from_recv_msg(intf,
|
|
ent->recv_msg, j, ent->seqid);
|
|
if(!smi_msg)
|
|
continue;
|
|
|
|
spin_unlock_irqrestore(&(intf->seq_lock),flags);
|
|
/* Send the new message. We send with a zero
|
|
* priority. It timed out, I doubt time is
|
|
* that critical now, and high priority
|
|
* messages are really only for messages to the
|
|
* local MC, which don't get resent. */
|
|
intf->handlers->sender(intf->send_info,
|
|
smi_msg, 0);
|
|
spin_lock_irqsave(&(intf->seq_lock), flags);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&(intf->seq_lock), flags);
|
|
|
|
list_for_each_entry_safe(msg, msg2, &timeouts, link) {
|
|
handle_msg_timeout(msg);
|
|
}
|
|
|
|
read_unlock(&(intf->users_lock));
|
|
}
|
|
spin_unlock(&interfaces_lock);
|
|
}
|
|
|
|
static void ipmi_request_event(void)
|
|
{
|
|
ipmi_smi_t intf;
|
|
int i;
|
|
|
|
spin_lock(&interfaces_lock);
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
intf = ipmi_interfaces[i];
|
|
if (intf == NULL)
|
|
continue;
|
|
|
|
intf->handlers->request_events(intf->send_info);
|
|
}
|
|
spin_unlock(&interfaces_lock);
|
|
}
|
|
|
|
static struct timer_list ipmi_timer;
|
|
|
|
/* Call every ~100 ms. */
|
|
#define IPMI_TIMEOUT_TIME 100
|
|
|
|
/* How many jiffies does it take to get to the timeout time. */
|
|
#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000)
|
|
|
|
/* Request events from the queue every second (this is the number of
|
|
IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the
|
|
future, IPMI will add a way to know immediately if an event is in
|
|
the queue and this silliness can go away. */
|
|
#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME))
|
|
|
|
static volatile int stop_operation = 0;
|
|
static volatile int timer_stopped = 0;
|
|
static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
|
|
|
|
static void ipmi_timeout(unsigned long data)
|
|
{
|
|
if (stop_operation) {
|
|
timer_stopped = 1;
|
|
return;
|
|
}
|
|
|
|
ticks_to_req_ev--;
|
|
if (ticks_to_req_ev == 0) {
|
|
ipmi_request_event();
|
|
ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
|
|
}
|
|
|
|
ipmi_timeout_handler(IPMI_TIMEOUT_TIME);
|
|
|
|
ipmi_timer.expires += IPMI_TIMEOUT_JIFFIES;
|
|
add_timer(&ipmi_timer);
|
|
}
|
|
|
|
|
|
static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0);
|
|
static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0);
|
|
|
|
/* FIXME - convert these to slabs. */
|
|
static void free_smi_msg(struct ipmi_smi_msg *msg)
|
|
{
|
|
atomic_dec(&smi_msg_inuse_count);
|
|
kfree(msg);
|
|
}
|
|
|
|
struct ipmi_smi_msg *ipmi_alloc_smi_msg(void)
|
|
{
|
|
struct ipmi_smi_msg *rv;
|
|
rv = kmalloc(sizeof(struct ipmi_smi_msg), GFP_ATOMIC);
|
|
if (rv) {
|
|
rv->done = free_smi_msg;
|
|
rv->user_data = NULL;
|
|
atomic_inc(&smi_msg_inuse_count);
|
|
}
|
|
return rv;
|
|
}
|
|
|
|
static void free_recv_msg(struct ipmi_recv_msg *msg)
|
|
{
|
|
atomic_dec(&recv_msg_inuse_count);
|
|
kfree(msg);
|
|
}
|
|
|
|
struct ipmi_recv_msg *ipmi_alloc_recv_msg(void)
|
|
{
|
|
struct ipmi_recv_msg *rv;
|
|
|
|
rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC);
|
|
if (rv) {
|
|
rv->done = free_recv_msg;
|
|
atomic_inc(&recv_msg_inuse_count);
|
|
}
|
|
return rv;
|
|
}
|
|
|
|
#ifdef CONFIG_IPMI_PANIC_EVENT
|
|
|
|
static void dummy_smi_done_handler(struct ipmi_smi_msg *msg)
|
|
{
|
|
}
|
|
|
|
static void dummy_recv_done_handler(struct ipmi_recv_msg *msg)
|
|
{
|
|
}
|
|
|
|
#ifdef CONFIG_IPMI_PANIC_STRING
|
|
static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
|
|
{
|
|
if ((msg->rsp[0] == (IPMI_NETFN_SENSOR_EVENT_RESPONSE << 2))
|
|
&& (msg->rsp[1] == IPMI_GET_EVENT_RECEIVER_CMD)
|
|
&& (msg->rsp[2] == IPMI_CC_NO_ERROR))
|
|
{
|
|
/* A get event receiver command, save it. */
|
|
intf->event_receiver = msg->rsp[3];
|
|
intf->event_receiver_lun = msg->rsp[4] & 0x3;
|
|
}
|
|
}
|
|
|
|
static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
|
|
{
|
|
if ((msg->rsp[0] == (IPMI_NETFN_APP_RESPONSE << 2))
|
|
&& (msg->rsp[1] == IPMI_GET_DEVICE_ID_CMD)
|
|
&& (msg->rsp[2] == IPMI_CC_NO_ERROR))
|
|
{
|
|
/* A get device id command, save if we are an event
|
|
receiver or generator. */
|
|
intf->local_sel_device = (msg->rsp[8] >> 2) & 1;
|
|
intf->local_event_generator = (msg->rsp[8] >> 5) & 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void send_panic_events(char *str)
|
|
{
|
|
struct kernel_ipmi_msg msg;
|
|
ipmi_smi_t intf;
|
|
unsigned char data[16];
|
|
int i;
|
|
struct ipmi_system_interface_addr *si;
|
|
struct ipmi_addr addr;
|
|
struct ipmi_smi_msg smi_msg;
|
|
struct ipmi_recv_msg recv_msg;
|
|
|
|
si = (struct ipmi_system_interface_addr *) &addr;
|
|
si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
|
|
si->channel = IPMI_BMC_CHANNEL;
|
|
si->lun = 0;
|
|
|
|
/* Fill in an event telling that we have failed. */
|
|
msg.netfn = 0x04; /* Sensor or Event. */
|
|
msg.cmd = 2; /* Platform event command. */
|
|
msg.data = data;
|
|
msg.data_len = 8;
|
|
data[0] = 0x21; /* Kernel generator ID, IPMI table 5-4 */
|
|
data[1] = 0x03; /* This is for IPMI 1.0. */
|
|
data[2] = 0x20; /* OS Critical Stop, IPMI table 36-3 */
|
|
data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */
|
|
data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */
|
|
|
|
/* Put a few breadcrumbs in. Hopefully later we can add more things
|
|
to make the panic events more useful. */
|
|
if (str) {
|
|
data[3] = str[0];
|
|
data[6] = str[1];
|
|
data[7] = str[2];
|
|
}
|
|
|
|
smi_msg.done = dummy_smi_done_handler;
|
|
recv_msg.done = dummy_recv_done_handler;
|
|
|
|
/* For every registered interface, send the event. */
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
intf = ipmi_interfaces[i];
|
|
if (intf == NULL)
|
|
continue;
|
|
|
|
/* Send the event announcing the panic. */
|
|
intf->handlers->set_run_to_completion(intf->send_info, 1);
|
|
i_ipmi_request(NULL,
|
|
intf,
|
|
&addr,
|
|
0,
|
|
&msg,
|
|
NULL,
|
|
&smi_msg,
|
|
&recv_msg,
|
|
0,
|
|
intf->my_address,
|
|
intf->my_lun,
|
|
0, 1); /* Don't retry, and don't wait. */
|
|
}
|
|
|
|
#ifdef CONFIG_IPMI_PANIC_STRING
|
|
/* On every interface, dump a bunch of OEM event holding the
|
|
string. */
|
|
if (!str)
|
|
return;
|
|
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
char *p = str;
|
|
struct ipmi_ipmb_addr *ipmb;
|
|
int j;
|
|
|
|
intf = ipmi_interfaces[i];
|
|
if (intf == NULL)
|
|
continue;
|
|
|
|
/* First job here is to figure out where to send the
|
|
OEM events. There's no way in IPMI to send OEM
|
|
events using an event send command, so we have to
|
|
find the SEL to put them in and stick them in
|
|
there. */
|
|
|
|
/* Get capabilities from the get device id. */
|
|
intf->local_sel_device = 0;
|
|
intf->local_event_generator = 0;
|
|
intf->event_receiver = 0;
|
|
|
|
/* Request the device info from the local MC. */
|
|
msg.netfn = IPMI_NETFN_APP_REQUEST;
|
|
msg.cmd = IPMI_GET_DEVICE_ID_CMD;
|
|
msg.data = NULL;
|
|
msg.data_len = 0;
|
|
intf->null_user_handler = device_id_fetcher;
|
|
i_ipmi_request(NULL,
|
|
intf,
|
|
&addr,
|
|
0,
|
|
&msg,
|
|
NULL,
|
|
&smi_msg,
|
|
&recv_msg,
|
|
0,
|
|
intf->my_address,
|
|
intf->my_lun,
|
|
0, 1); /* Don't retry, and don't wait. */
|
|
|
|
if (intf->local_event_generator) {
|
|
/* Request the event receiver from the local MC. */
|
|
msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST;
|
|
msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD;
|
|
msg.data = NULL;
|
|
msg.data_len = 0;
|
|
intf->null_user_handler = event_receiver_fetcher;
|
|
i_ipmi_request(NULL,
|
|
intf,
|
|
&addr,
|
|
0,
|
|
&msg,
|
|
NULL,
|
|
&smi_msg,
|
|
&recv_msg,
|
|
0,
|
|
intf->my_address,
|
|
intf->my_lun,
|
|
0, 1); /* no retry, and no wait. */
|
|
}
|
|
intf->null_user_handler = NULL;
|
|
|
|
/* Validate the event receiver. The low bit must not
|
|
be 1 (it must be a valid IPMB address), it cannot
|
|
be zero, and it must not be my address. */
|
|
if (((intf->event_receiver & 1) == 0)
|
|
&& (intf->event_receiver != 0)
|
|
&& (intf->event_receiver != intf->my_address))
|
|
{
|
|
/* The event receiver is valid, send an IPMB
|
|
message. */
|
|
ipmb = (struct ipmi_ipmb_addr *) &addr;
|
|
ipmb->addr_type = IPMI_IPMB_ADDR_TYPE;
|
|
ipmb->channel = 0; /* FIXME - is this right? */
|
|
ipmb->lun = intf->event_receiver_lun;
|
|
ipmb->slave_addr = intf->event_receiver;
|
|
} else if (intf->local_sel_device) {
|
|
/* The event receiver was not valid (or was
|
|
me), but I am an SEL device, just dump it
|
|
in my SEL. */
|
|
si = (struct ipmi_system_interface_addr *) &addr;
|
|
si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
|
|
si->channel = IPMI_BMC_CHANNEL;
|
|
si->lun = 0;
|
|
} else
|
|
continue; /* No where to send the event. */
|
|
|
|
|
|
msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */
|
|
msg.cmd = IPMI_ADD_SEL_ENTRY_CMD;
|
|
msg.data = data;
|
|
msg.data_len = 16;
|
|
|
|
j = 0;
|
|
while (*p) {
|
|
int size = strlen(p);
|
|
|
|
if (size > 11)
|
|
size = 11;
|
|
data[0] = 0;
|
|
data[1] = 0;
|
|
data[2] = 0xf0; /* OEM event without timestamp. */
|
|
data[3] = intf->my_address;
|
|
data[4] = j++; /* sequence # */
|
|
/* Always give 11 bytes, so strncpy will fill
|
|
it with zeroes for me. */
|
|
strncpy(data+5, p, 11);
|
|
p += size;
|
|
|
|
i_ipmi_request(NULL,
|
|
intf,
|
|
&addr,
|
|
0,
|
|
&msg,
|
|
NULL,
|
|
&smi_msg,
|
|
&recv_msg,
|
|
0,
|
|
intf->my_address,
|
|
intf->my_lun,
|
|
0, 1); /* no retry, and no wait. */
|
|
}
|
|
}
|
|
#endif /* CONFIG_IPMI_PANIC_STRING */
|
|
}
|
|
#endif /* CONFIG_IPMI_PANIC_EVENT */
|
|
|
|
static int has_paniced = 0;
|
|
|
|
static int panic_event(struct notifier_block *this,
|
|
unsigned long event,
|
|
void *ptr)
|
|
{
|
|
int i;
|
|
ipmi_smi_t intf;
|
|
|
|
if (has_paniced)
|
|
return NOTIFY_DONE;
|
|
has_paniced = 1;
|
|
|
|
/* For every registered interface, set it to run to completion. */
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
intf = ipmi_interfaces[i];
|
|
if (intf == NULL)
|
|
continue;
|
|
|
|
intf->handlers->set_run_to_completion(intf->send_info, 1);
|
|
}
|
|
|
|
#ifdef CONFIG_IPMI_PANIC_EVENT
|
|
send_panic_events(ptr);
|
|
#endif
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block panic_block = {
|
|
.notifier_call = panic_event,
|
|
.next = NULL,
|
|
.priority = 200 /* priority: INT_MAX >= x >= 0 */
|
|
};
|
|
|
|
static int ipmi_init_msghandler(void)
|
|
{
|
|
int i;
|
|
|
|
if (initialized)
|
|
return 0;
|
|
|
|
printk(KERN_INFO "ipmi message handler version "
|
|
IPMI_MSGHANDLER_VERSION "\n");
|
|
|
|
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
|
|
ipmi_interfaces[i] = NULL;
|
|
}
|
|
|
|
proc_ipmi_root = proc_mkdir("ipmi", NULL);
|
|
if (!proc_ipmi_root) {
|
|
printk(KERN_ERR PFX "Unable to create IPMI proc dir");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
proc_ipmi_root->owner = THIS_MODULE;
|
|
|
|
init_timer(&ipmi_timer);
|
|
ipmi_timer.data = 0;
|
|
ipmi_timer.function = ipmi_timeout;
|
|
ipmi_timer.expires = jiffies + IPMI_TIMEOUT_JIFFIES;
|
|
add_timer(&ipmi_timer);
|
|
|
|
notifier_chain_register(&panic_notifier_list, &panic_block);
|
|
|
|
initialized = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __init int ipmi_init_msghandler_mod(void)
|
|
{
|
|
ipmi_init_msghandler();
|
|
return 0;
|
|
}
|
|
|
|
static __exit void cleanup_ipmi(void)
|
|
{
|
|
int count;
|
|
|
|
if (!initialized)
|
|
return;
|
|
|
|
notifier_chain_unregister(&panic_notifier_list, &panic_block);
|
|
|
|
/* This can't be called if any interfaces exist, so no worry about
|
|
shutting down the interfaces. */
|
|
|
|
/* Tell the timer to stop, then wait for it to stop. This avoids
|
|
problems with race conditions removing the timer here. */
|
|
stop_operation = 1;
|
|
while (!timer_stopped) {
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(1);
|
|
}
|
|
|
|
remove_proc_entry(proc_ipmi_root->name, &proc_root);
|
|
|
|
initialized = 0;
|
|
|
|
/* Check for buffer leaks. */
|
|
count = atomic_read(&smi_msg_inuse_count);
|
|
if (count != 0)
|
|
printk(KERN_WARNING PFX "SMI message count %d at exit\n",
|
|
count);
|
|
count = atomic_read(&recv_msg_inuse_count);
|
|
if (count != 0)
|
|
printk(KERN_WARNING PFX "recv message count %d at exit\n",
|
|
count);
|
|
}
|
|
module_exit(cleanup_ipmi);
|
|
|
|
module_init(ipmi_init_msghandler_mod);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(ipmi_create_user);
|
|
EXPORT_SYMBOL(ipmi_destroy_user);
|
|
EXPORT_SYMBOL(ipmi_get_version);
|
|
EXPORT_SYMBOL(ipmi_request_settime);
|
|
EXPORT_SYMBOL(ipmi_request_supply_msgs);
|
|
EXPORT_SYMBOL(ipmi_register_smi);
|
|
EXPORT_SYMBOL(ipmi_unregister_smi);
|
|
EXPORT_SYMBOL(ipmi_register_for_cmd);
|
|
EXPORT_SYMBOL(ipmi_unregister_for_cmd);
|
|
EXPORT_SYMBOL(ipmi_smi_msg_received);
|
|
EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout);
|
|
EXPORT_SYMBOL(ipmi_alloc_smi_msg);
|
|
EXPORT_SYMBOL(ipmi_addr_length);
|
|
EXPORT_SYMBOL(ipmi_validate_addr);
|
|
EXPORT_SYMBOL(ipmi_set_gets_events);
|
|
EXPORT_SYMBOL(ipmi_smi_watcher_register);
|
|
EXPORT_SYMBOL(ipmi_smi_watcher_unregister);
|
|
EXPORT_SYMBOL(ipmi_set_my_address);
|
|
EXPORT_SYMBOL(ipmi_get_my_address);
|
|
EXPORT_SYMBOL(ipmi_set_my_LUN);
|
|
EXPORT_SYMBOL(ipmi_get_my_LUN);
|
|
EXPORT_SYMBOL(ipmi_smi_add_proc_entry);
|
|
EXPORT_SYMBOL(ipmi_user_set_run_to_completion);
|