17514e8a6f
Also remove bogus comments for idefloppy_init() and idetape_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
1277 lines
36 KiB
C
1277 lines
36 KiB
C
/*
|
|
* linux/drivers/ide/ide-disk.c Version 1.18 Mar 05, 2003
|
|
*
|
|
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
|
|
* Copyright (C) 1998-2002 Linux ATA Development
|
|
* Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat <alan@redhat.com>
|
|
*/
|
|
|
|
/*
|
|
* Mostly written by Mark Lord <mlord@pobox.com>
|
|
* and Gadi Oxman <gadio@netvision.net.il>
|
|
* and Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
|
|
*
|
|
* Version 1.00 move disk only code from ide.c to ide-disk.c
|
|
* support optional byte-swapping of all data
|
|
* Version 1.01 fix previous byte-swapping code
|
|
* Version 1.02 remove ", LBA" from drive identification msgs
|
|
* Version 1.03 fix display of id->buf_size for big-endian
|
|
* Version 1.04 add /proc configurable settings and S.M.A.R.T support
|
|
* Version 1.05 add capacity support for ATA3 >= 8GB
|
|
* Version 1.06 get boot-up messages to show full cyl count
|
|
* Version 1.07 disable door-locking if it fails
|
|
* Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB,
|
|
* process of adding new ATA4 compliance.
|
|
* fixed problems in allowing fdisk to see
|
|
* the entire disk.
|
|
* Version 1.09 added increment of rq->sector in ide_multwrite
|
|
* added UDMA 3/4 reporting
|
|
* Version 1.10 request queue changes, Ultra DMA 100
|
|
* Version 1.11 added 48-bit lba
|
|
* Version 1.12 adding taskfile io access method
|
|
* Version 1.13 added standby and flush-cache for notifier
|
|
* Version 1.14 added acoustic-wcache
|
|
* Version 1.15 convert all calls to ide_raw_taskfile
|
|
* since args will return register content.
|
|
* Version 1.16 added suspend-resume-checkpower
|
|
* Version 1.17 do flush on standy, do flush on ATA < ATA6
|
|
* fix wcache setup.
|
|
*/
|
|
|
|
#define IDEDISK_VERSION "1.18"
|
|
|
|
#undef REALLY_SLOW_IO /* most systems can safely undef this */
|
|
|
|
//#define DEBUG
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define _IDE_DISK
|
|
|
|
#include <linux/ide.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/div64.h>
|
|
|
|
struct ide_disk_obj {
|
|
ide_drive_t *drive;
|
|
ide_driver_t *driver;
|
|
struct gendisk *disk;
|
|
struct kref kref;
|
|
};
|
|
|
|
static DECLARE_MUTEX(idedisk_ref_sem);
|
|
|
|
#define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref)
|
|
|
|
#define ide_disk_g(disk) \
|
|
container_of((disk)->private_data, struct ide_disk_obj, driver)
|
|
|
|
static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
|
|
{
|
|
struct ide_disk_obj *idkp = NULL;
|
|
|
|
down(&idedisk_ref_sem);
|
|
idkp = ide_disk_g(disk);
|
|
if (idkp)
|
|
kref_get(&idkp->kref);
|
|
up(&idedisk_ref_sem);
|
|
return idkp;
|
|
}
|
|
|
|
static void ide_disk_release(struct kref *);
|
|
|
|
static void ide_disk_put(struct ide_disk_obj *idkp)
|
|
{
|
|
down(&idedisk_ref_sem);
|
|
kref_put(&idkp->kref, ide_disk_release);
|
|
up(&idedisk_ref_sem);
|
|
}
|
|
|
|
/*
|
|
* lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity"
|
|
* value for this drive (from its reported identification information).
|
|
*
|
|
* Returns: 1 if lba_capacity looks sensible
|
|
* 0 otherwise
|
|
*
|
|
* It is called only once for each drive.
|
|
*/
|
|
static int lba_capacity_is_ok (struct hd_driveid *id)
|
|
{
|
|
unsigned long lba_sects, chs_sects, head, tail;
|
|
|
|
/* No non-LBA info .. so valid! */
|
|
if (id->cyls == 0)
|
|
return 1;
|
|
|
|
/*
|
|
* The ATA spec tells large drives to return
|
|
* C/H/S = 16383/16/63 independent of their size.
|
|
* Some drives can be jumpered to use 15 heads instead of 16.
|
|
* Some drives can be jumpered to use 4092 cyls instead of 16383.
|
|
*/
|
|
if ((id->cyls == 16383
|
|
|| (id->cyls == 4092 && id->cur_cyls == 16383)) &&
|
|
id->sectors == 63 &&
|
|
(id->heads == 15 || id->heads == 16) &&
|
|
(id->lba_capacity >= 16383*63*id->heads))
|
|
return 1;
|
|
|
|
lba_sects = id->lba_capacity;
|
|
chs_sects = id->cyls * id->heads * id->sectors;
|
|
|
|
/* perform a rough sanity check on lba_sects: within 10% is OK */
|
|
if ((lba_sects - chs_sects) < chs_sects/10)
|
|
return 1;
|
|
|
|
/* some drives have the word order reversed */
|
|
head = ((lba_sects >> 16) & 0xffff);
|
|
tail = (lba_sects & 0xffff);
|
|
lba_sects = (head | (tail << 16));
|
|
if ((lba_sects - chs_sects) < chs_sects/10) {
|
|
id->lba_capacity = lba_sects;
|
|
return 1; /* lba_capacity is (now) good */
|
|
}
|
|
|
|
return 0; /* lba_capacity value may be bad */
|
|
}
|
|
|
|
/*
|
|
* __ide_do_rw_disk() issues READ and WRITE commands to a disk,
|
|
* using LBA if supported, or CHS otherwise, to address sectors.
|
|
*/
|
|
static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned int dma = drive->using_dma;
|
|
u8 lba48 = (drive->addressing == 1) ? 1 : 0;
|
|
task_ioreg_t command = WIN_NOP;
|
|
ata_nsector_t nsectors;
|
|
|
|
nsectors.all = (u16) rq->nr_sectors;
|
|
|
|
if (hwif->no_lba48_dma && lba48 && dma) {
|
|
if (block + rq->nr_sectors > 1ULL << 28)
|
|
dma = 0;
|
|
else
|
|
lba48 = 0;
|
|
}
|
|
|
|
if (!dma) {
|
|
ide_init_sg_cmd(drive, rq);
|
|
ide_map_sg(drive, rq);
|
|
}
|
|
|
|
if (IDE_CONTROL_REG)
|
|
hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
|
|
|
|
/* FIXME: SELECT_MASK(drive, 0) ? */
|
|
|
|
if (drive->select.b.lba) {
|
|
if (lba48) {
|
|
task_ioreg_t tasklets[10];
|
|
|
|
pr_debug("%s: LBA=0x%012llx\n", drive->name, block);
|
|
|
|
tasklets[0] = 0;
|
|
tasklets[1] = 0;
|
|
tasklets[2] = nsectors.b.low;
|
|
tasklets[3] = nsectors.b.high;
|
|
tasklets[4] = (task_ioreg_t) block;
|
|
tasklets[5] = (task_ioreg_t) (block>>8);
|
|
tasklets[6] = (task_ioreg_t) (block>>16);
|
|
tasklets[7] = (task_ioreg_t) (block>>24);
|
|
if (sizeof(block) == 4) {
|
|
tasklets[8] = (task_ioreg_t) 0;
|
|
tasklets[9] = (task_ioreg_t) 0;
|
|
} else {
|
|
tasklets[8] = (task_ioreg_t)((u64)block >> 32);
|
|
tasklets[9] = (task_ioreg_t)((u64)block >> 40);
|
|
}
|
|
#ifdef DEBUG
|
|
printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n",
|
|
drive->name, tasklets[3], tasklets[2],
|
|
tasklets[9], tasklets[8], tasklets[7],
|
|
tasklets[6], tasklets[5], tasklets[4]);
|
|
#endif
|
|
hwif->OUTB(tasklets[1], IDE_FEATURE_REG);
|
|
hwif->OUTB(tasklets[3], IDE_NSECTOR_REG);
|
|
hwif->OUTB(tasklets[7], IDE_SECTOR_REG);
|
|
hwif->OUTB(tasklets[8], IDE_LCYL_REG);
|
|
hwif->OUTB(tasklets[9], IDE_HCYL_REG);
|
|
|
|
hwif->OUTB(tasklets[0], IDE_FEATURE_REG);
|
|
hwif->OUTB(tasklets[2], IDE_NSECTOR_REG);
|
|
hwif->OUTB(tasklets[4], IDE_SECTOR_REG);
|
|
hwif->OUTB(tasklets[5], IDE_LCYL_REG);
|
|
hwif->OUTB(tasklets[6], IDE_HCYL_REG);
|
|
hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG);
|
|
} else {
|
|
hwif->OUTB(0x00, IDE_FEATURE_REG);
|
|
hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
|
|
hwif->OUTB(block, IDE_SECTOR_REG);
|
|
hwif->OUTB(block>>=8, IDE_LCYL_REG);
|
|
hwif->OUTB(block>>=8, IDE_HCYL_REG);
|
|
hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG);
|
|
}
|
|
} else {
|
|
unsigned int sect,head,cyl,track;
|
|
track = (int)block / drive->sect;
|
|
sect = (int)block % drive->sect + 1;
|
|
hwif->OUTB(sect, IDE_SECTOR_REG);
|
|
head = track % drive->head;
|
|
cyl = track / drive->head;
|
|
|
|
pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
|
|
|
|
hwif->OUTB(0x00, IDE_FEATURE_REG);
|
|
hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
|
|
hwif->OUTB(cyl, IDE_LCYL_REG);
|
|
hwif->OUTB(cyl>>8, IDE_HCYL_REG);
|
|
hwif->OUTB(head|drive->select.all,IDE_SELECT_REG);
|
|
}
|
|
|
|
if (dma) {
|
|
if (!hwif->dma_setup(drive)) {
|
|
if (rq_data_dir(rq)) {
|
|
command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA;
|
|
if (drive->vdma)
|
|
command = lba48 ? WIN_WRITE_EXT: WIN_WRITE;
|
|
} else {
|
|
command = lba48 ? WIN_READDMA_EXT : WIN_READDMA;
|
|
if (drive->vdma)
|
|
command = lba48 ? WIN_READ_EXT: WIN_READ;
|
|
}
|
|
hwif->dma_exec_cmd(drive, command);
|
|
hwif->dma_start(drive);
|
|
return ide_started;
|
|
}
|
|
/* fallback to PIO */
|
|
ide_init_sg_cmd(drive, rq);
|
|
}
|
|
|
|
if (rq_data_dir(rq) == READ) {
|
|
|
|
if (drive->mult_count) {
|
|
hwif->data_phase = TASKFILE_MULTI_IN;
|
|
command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD;
|
|
} else {
|
|
hwif->data_phase = TASKFILE_IN;
|
|
command = lba48 ? WIN_READ_EXT : WIN_READ;
|
|
}
|
|
|
|
ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL);
|
|
return ide_started;
|
|
} else {
|
|
if (drive->mult_count) {
|
|
hwif->data_phase = TASKFILE_MULTI_OUT;
|
|
command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE;
|
|
} else {
|
|
hwif->data_phase = TASKFILE_OUT;
|
|
command = lba48 ? WIN_WRITE_EXT : WIN_WRITE;
|
|
}
|
|
|
|
/* FIXME: ->OUTBSYNC ? */
|
|
hwif->OUTB(command, IDE_COMMAND_REG);
|
|
|
|
return pre_task_out_intr(drive, rq);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* 268435455 == 137439 MB or 28bit limit
|
|
* 320173056 == 163929 MB or 48bit addressing
|
|
* 1073741822 == 549756 MB or 48bit addressing fake drive
|
|
*/
|
|
|
|
static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
|
|
BUG_ON(drive->blocked);
|
|
|
|
if (!blk_fs_request(rq)) {
|
|
blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
|
|
ide_end_request(drive, 0, 0);
|
|
return ide_stopped;
|
|
}
|
|
|
|
pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
|
|
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
|
|
block, rq->nr_sectors, (unsigned long)rq->buffer);
|
|
|
|
if (hwif->rw_disk)
|
|
hwif->rw_disk(drive, rq);
|
|
|
|
return __ide_do_rw_disk(drive, rq, block);
|
|
}
|
|
|
|
/*
|
|
* Queries for true maximum capacity of the drive.
|
|
* Returns maximum LBA address (> 0) of the drive, 0 if failed.
|
|
*/
|
|
static unsigned long idedisk_read_native_max_address(ide_drive_t *drive)
|
|
{
|
|
ide_task_t args;
|
|
unsigned long addr = 0;
|
|
|
|
/* Create IDE/ATA command request structure */
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_SELECT_OFFSET] = 0x40;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
/* submit command request */
|
|
ide_raw_taskfile(drive, &args, NULL);
|
|
|
|
/* if OK, compute maximum address value */
|
|
if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
|
|
addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24)
|
|
| ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16)
|
|
| ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8)
|
|
| ((args.tfRegister[IDE_SECTOR_OFFSET] ));
|
|
addr++; /* since the return value is (maxlba - 1), we add 1 */
|
|
}
|
|
return addr;
|
|
}
|
|
|
|
static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive)
|
|
{
|
|
ide_task_t args;
|
|
unsigned long long addr = 0;
|
|
|
|
/* Create IDE/ATA command request structure */
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
|
|
args.tfRegister[IDE_SELECT_OFFSET] = 0x40;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX_EXT;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
/* submit command request */
|
|
ide_raw_taskfile(drive, &args, NULL);
|
|
|
|
/* if OK, compute maximum address value */
|
|
if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
|
|
u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) |
|
|
(args.hobRegister[IDE_LCYL_OFFSET] << 8) |
|
|
args.hobRegister[IDE_SECTOR_OFFSET];
|
|
u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) |
|
|
((args.tfRegister[IDE_LCYL_OFFSET])<<8) |
|
|
(args.tfRegister[IDE_SECTOR_OFFSET]);
|
|
addr = ((__u64)high << 24) | low;
|
|
addr++; /* since the return value is (maxlba - 1), we add 1 */
|
|
}
|
|
return addr;
|
|
}
|
|
|
|
/*
|
|
* Sets maximum virtual LBA address of the drive.
|
|
* Returns new maximum virtual LBA address (> 0) or 0 on failure.
|
|
*/
|
|
static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req)
|
|
{
|
|
ide_task_t args;
|
|
unsigned long addr_set = 0;
|
|
|
|
addr_req--;
|
|
/* Create IDE/ATA command request structure */
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff);
|
|
args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >> 8) & 0xff);
|
|
args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >> 16) & 0xff);
|
|
args.tfRegister[IDE_SELECT_OFFSET] = ((addr_req >> 24) & 0x0f) | 0x40;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
/* submit command request */
|
|
ide_raw_taskfile(drive, &args, NULL);
|
|
/* if OK, read new maximum address value */
|
|
if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
|
|
addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24)
|
|
| ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16)
|
|
| ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8)
|
|
| ((args.tfRegister[IDE_SECTOR_OFFSET] ));
|
|
addr_set++;
|
|
}
|
|
return addr_set;
|
|
}
|
|
|
|
static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req)
|
|
{
|
|
ide_task_t args;
|
|
unsigned long long addr_set = 0;
|
|
|
|
addr_req--;
|
|
/* Create IDE/ATA command request structure */
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff);
|
|
args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >>= 8) & 0xff);
|
|
args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >>= 8) & 0xff);
|
|
args.tfRegister[IDE_SELECT_OFFSET] = 0x40;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX_EXT;
|
|
args.hobRegister[IDE_SECTOR_OFFSET] = (addr_req >>= 8) & 0xff;
|
|
args.hobRegister[IDE_LCYL_OFFSET] = (addr_req >>= 8) & 0xff;
|
|
args.hobRegister[IDE_HCYL_OFFSET] = (addr_req >>= 8) & 0xff;
|
|
args.hobRegister[IDE_SELECT_OFFSET] = 0x40;
|
|
args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80);
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
/* submit command request */
|
|
ide_raw_taskfile(drive, &args, NULL);
|
|
/* if OK, compute maximum address value */
|
|
if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
|
|
u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) |
|
|
(args.hobRegister[IDE_LCYL_OFFSET] << 8) |
|
|
args.hobRegister[IDE_SECTOR_OFFSET];
|
|
u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) |
|
|
((args.tfRegister[IDE_LCYL_OFFSET])<<8) |
|
|
(args.tfRegister[IDE_SECTOR_OFFSET]);
|
|
addr_set = ((__u64)high << 24) | low;
|
|
addr_set++;
|
|
}
|
|
return addr_set;
|
|
}
|
|
|
|
static unsigned long long sectors_to_MB(unsigned long long n)
|
|
{
|
|
n <<= 9; /* make it bytes */
|
|
do_div(n, 1000000); /* make it MB */
|
|
return n;
|
|
}
|
|
|
|
/*
|
|
* Bits 10 of command_set_1 and cfs_enable_1 must be equal,
|
|
* so on non-buggy drives we need test only one.
|
|
* However, we should also check whether these fields are valid.
|
|
*/
|
|
static inline int idedisk_supports_hpa(const struct hd_driveid *id)
|
|
{
|
|
return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
|
|
}
|
|
|
|
/*
|
|
* The same here.
|
|
*/
|
|
static inline int idedisk_supports_lba48(const struct hd_driveid *id)
|
|
{
|
|
return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)
|
|
&& id->lba_capacity_2;
|
|
}
|
|
|
|
static inline void idedisk_check_hpa(ide_drive_t *drive)
|
|
{
|
|
unsigned long long capacity, set_max;
|
|
int lba48 = idedisk_supports_lba48(drive->id);
|
|
|
|
capacity = drive->capacity64;
|
|
if (lba48)
|
|
set_max = idedisk_read_native_max_address_ext(drive);
|
|
else
|
|
set_max = idedisk_read_native_max_address(drive);
|
|
|
|
if (set_max <= capacity)
|
|
return;
|
|
|
|
printk(KERN_INFO "%s: Host Protected Area detected.\n"
|
|
"\tcurrent capacity is %llu sectors (%llu MB)\n"
|
|
"\tnative capacity is %llu sectors (%llu MB)\n",
|
|
drive->name,
|
|
capacity, sectors_to_MB(capacity),
|
|
set_max, sectors_to_MB(set_max));
|
|
|
|
if (lba48)
|
|
set_max = idedisk_set_max_address_ext(drive, set_max);
|
|
else
|
|
set_max = idedisk_set_max_address(drive, set_max);
|
|
if (set_max) {
|
|
drive->capacity64 = set_max;
|
|
printk(KERN_INFO "%s: Host Protected Area disabled.\n",
|
|
drive->name);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Compute drive->capacity, the full capacity of the drive
|
|
* Called with drive->id != NULL.
|
|
*
|
|
* To compute capacity, this uses either of
|
|
*
|
|
* 1. CHS value set by user (whatever user sets will be trusted)
|
|
* 2. LBA value from target drive (require new ATA feature)
|
|
* 3. LBA value from system BIOS (new one is OK, old one may break)
|
|
* 4. CHS value from system BIOS (traditional style)
|
|
*
|
|
* in above order (i.e., if value of higher priority is available,
|
|
* reset will be ignored).
|
|
*/
|
|
static void init_idedisk_capacity (ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
/*
|
|
* If this drive supports the Host Protected Area feature set,
|
|
* then we may need to change our opinion about the drive's capacity.
|
|
*/
|
|
int hpa = idedisk_supports_hpa(id);
|
|
|
|
if (idedisk_supports_lba48(id)) {
|
|
/* drive speaks 48-bit LBA */
|
|
drive->select.b.lba = 1;
|
|
drive->capacity64 = id->lba_capacity_2;
|
|
if (hpa)
|
|
idedisk_check_hpa(drive);
|
|
} else if ((id->capability & 2) && lba_capacity_is_ok(id)) {
|
|
/* drive speaks 28-bit LBA */
|
|
drive->select.b.lba = 1;
|
|
drive->capacity64 = id->lba_capacity;
|
|
if (hpa)
|
|
idedisk_check_hpa(drive);
|
|
} else {
|
|
/* drive speaks boring old 28-bit CHS */
|
|
drive->capacity64 = drive->cyl * drive->head * drive->sect;
|
|
}
|
|
}
|
|
|
|
static sector_t idedisk_capacity (ide_drive_t *drive)
|
|
{
|
|
return drive->capacity64 - drive->sect0;
|
|
}
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
|
|
static int smart_enable(ide_drive_t *drive)
|
|
{
|
|
ide_task_t args;
|
|
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_FEATURE_OFFSET] = SMART_ENABLE;
|
|
args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS;
|
|
args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
return ide_raw_taskfile(drive, &args, NULL);
|
|
}
|
|
|
|
static int get_smart_values(ide_drive_t *drive, u8 *buf)
|
|
{
|
|
ide_task_t args;
|
|
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_VALUES;
|
|
args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01;
|
|
args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS;
|
|
args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART;
|
|
args.command_type = IDE_DRIVE_TASK_IN;
|
|
args.data_phase = TASKFILE_IN;
|
|
args.handler = &task_in_intr;
|
|
(void) smart_enable(drive);
|
|
return ide_raw_taskfile(drive, &args, buf);
|
|
}
|
|
|
|
static int get_smart_thresholds(ide_drive_t *drive, u8 *buf)
|
|
{
|
|
ide_task_t args;
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_THRESHOLDS;
|
|
args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01;
|
|
args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS;
|
|
args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART;
|
|
args.command_type = IDE_DRIVE_TASK_IN;
|
|
args.data_phase = TASKFILE_IN;
|
|
args.handler = &task_in_intr;
|
|
(void) smart_enable(drive);
|
|
return ide_raw_taskfile(drive, &args, buf);
|
|
}
|
|
|
|
static int proc_idedisk_read_cache
|
|
(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t *drive = (ide_drive_t *) data;
|
|
char *out = page;
|
|
int len;
|
|
|
|
if (drive->id_read)
|
|
len = sprintf(out,"%i\n", drive->id->buf_size / 2);
|
|
else
|
|
len = sprintf(out,"(none)\n");
|
|
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
|
|
}
|
|
|
|
static int proc_idedisk_read_capacity
|
|
(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t*drive = (ide_drive_t *)data;
|
|
int len;
|
|
|
|
len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive));
|
|
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
|
|
}
|
|
|
|
static int proc_idedisk_read_smart_thresholds
|
|
(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t *drive = (ide_drive_t *)data;
|
|
int len = 0, i = 0;
|
|
|
|
if (!get_smart_thresholds(drive, page)) {
|
|
unsigned short *val = (unsigned short *) page;
|
|
char *out = ((char *)val) + (SECTOR_WORDS * 4);
|
|
page = out;
|
|
do {
|
|
out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n');
|
|
val += 1;
|
|
} while (i < (SECTOR_WORDS * 2));
|
|
len = out - page;
|
|
}
|
|
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
|
|
}
|
|
|
|
static int proc_idedisk_read_smart_values
|
|
(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t *drive = (ide_drive_t *)data;
|
|
int len = 0, i = 0;
|
|
|
|
if (!get_smart_values(drive, page)) {
|
|
unsigned short *val = (unsigned short *) page;
|
|
char *out = ((char *)val) + (SECTOR_WORDS * 4);
|
|
page = out;
|
|
do {
|
|
out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n');
|
|
val += 1;
|
|
} while (i < (SECTOR_WORDS * 2));
|
|
len = out - page;
|
|
}
|
|
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
|
|
}
|
|
|
|
static ide_proc_entry_t idedisk_proc[] = {
|
|
{ "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
|
|
{ "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
|
|
{ "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
|
|
{ "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL },
|
|
{ "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL },
|
|
{ NULL, 0, NULL, NULL }
|
|
};
|
|
|
|
#else
|
|
|
|
#define idedisk_proc NULL
|
|
|
|
#endif /* CONFIG_PROC_FS */
|
|
|
|
static void idedisk_end_flush(request_queue_t *q, struct request *flush_rq)
|
|
{
|
|
ide_drive_t *drive = q->queuedata;
|
|
struct request *rq = flush_rq->end_io_data;
|
|
int good_sectors = rq->hard_nr_sectors;
|
|
int bad_sectors;
|
|
sector_t sector;
|
|
|
|
if (flush_rq->errors & ABRT_ERR) {
|
|
printk(KERN_ERR "%s: barrier support doesn't work\n", drive->name);
|
|
blk_queue_ordered(drive->queue, QUEUE_ORDERED_NONE);
|
|
blk_queue_issue_flush_fn(drive->queue, NULL);
|
|
good_sectors = 0;
|
|
} else if (flush_rq->errors) {
|
|
good_sectors = 0;
|
|
if (blk_barrier_preflush(rq)) {
|
|
sector = ide_get_error_location(drive,flush_rq->buffer);
|
|
if ((sector >= rq->hard_sector) &&
|
|
(sector < rq->hard_sector + rq->hard_nr_sectors))
|
|
good_sectors = sector - rq->hard_sector;
|
|
}
|
|
}
|
|
|
|
if (flush_rq->errors)
|
|
printk(KERN_ERR "%s: failed barrier write: "
|
|
"sector=%Lx(good=%d/bad=%d)\n",
|
|
drive->name, (unsigned long long)rq->sector,
|
|
good_sectors,
|
|
(int) (rq->hard_nr_sectors-good_sectors));
|
|
|
|
bad_sectors = rq->hard_nr_sectors - good_sectors;
|
|
|
|
if (good_sectors)
|
|
__ide_end_request(drive, rq, 1, good_sectors);
|
|
if (bad_sectors)
|
|
__ide_end_request(drive, rq, 0, bad_sectors);
|
|
}
|
|
|
|
static int idedisk_prepare_flush(request_queue_t *q, struct request *rq)
|
|
{
|
|
ide_drive_t *drive = q->queuedata;
|
|
|
|
if (!drive->wcache)
|
|
return 0;
|
|
|
|
memset(rq->cmd, 0, sizeof(rq->cmd));
|
|
|
|
if (ide_id_has_flush_cache_ext(drive->id) &&
|
|
(drive->capacity64 >= (1UL << 28)))
|
|
rq->cmd[0] = WIN_FLUSH_CACHE_EXT;
|
|
else
|
|
rq->cmd[0] = WIN_FLUSH_CACHE;
|
|
|
|
|
|
rq->flags |= REQ_DRIVE_TASK | REQ_SOFTBARRIER;
|
|
rq->buffer = rq->cmd;
|
|
return 1;
|
|
}
|
|
|
|
static int idedisk_issue_flush(request_queue_t *q, struct gendisk *disk,
|
|
sector_t *error_sector)
|
|
{
|
|
ide_drive_t *drive = q->queuedata;
|
|
struct request *rq;
|
|
int ret;
|
|
|
|
if (!drive->wcache)
|
|
return 0;
|
|
|
|
rq = blk_get_request(q, WRITE, __GFP_WAIT);
|
|
|
|
idedisk_prepare_flush(q, rq);
|
|
|
|
ret = blk_execute_rq(q, disk, rq, 0);
|
|
|
|
/*
|
|
* if we failed and caller wants error offset, get it
|
|
*/
|
|
if (ret && error_sector)
|
|
*error_sector = ide_get_error_location(drive, rq->cmd);
|
|
|
|
blk_put_request(rq);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This is tightly woven into the driver->do_special can not touch.
|
|
* DON'T do it again until a total personality rewrite is committed.
|
|
*/
|
|
static int set_multcount(ide_drive_t *drive, int arg)
|
|
{
|
|
struct request rq;
|
|
|
|
if (drive->special.b.set_multmode)
|
|
return -EBUSY;
|
|
ide_init_drive_cmd (&rq);
|
|
rq.flags = REQ_DRIVE_CMD;
|
|
drive->mult_req = arg;
|
|
drive->special.b.set_multmode = 1;
|
|
(void) ide_do_drive_cmd (drive, &rq, ide_wait);
|
|
return (drive->mult_count == arg) ? 0 : -EIO;
|
|
}
|
|
|
|
static int set_nowerr(ide_drive_t *drive, int arg)
|
|
{
|
|
if (ide_spin_wait_hwgroup(drive))
|
|
return -EBUSY;
|
|
drive->nowerr = arg;
|
|
drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
|
|
spin_unlock_irq(&ide_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int write_cache(ide_drive_t *drive, int arg)
|
|
{
|
|
ide_task_t args;
|
|
int err;
|
|
|
|
if (!ide_id_has_flush_cache(drive->id))
|
|
return 1;
|
|
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ?
|
|
SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
|
|
err = ide_raw_taskfile(drive, &args, NULL);
|
|
if (err)
|
|
return err;
|
|
|
|
drive->wcache = arg;
|
|
return 0;
|
|
}
|
|
|
|
static int do_idedisk_flushcache (ide_drive_t *drive)
|
|
{
|
|
ide_task_t args;
|
|
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
if (ide_id_has_flush_cache_ext(drive->id))
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE_EXT;
|
|
else
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
return ide_raw_taskfile(drive, &args, NULL);
|
|
}
|
|
|
|
static int set_acoustic (ide_drive_t *drive, int arg)
|
|
{
|
|
ide_task_t args;
|
|
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? SETFEATURES_EN_AAM :
|
|
SETFEATURES_DIS_AAM;
|
|
args.tfRegister[IDE_NSECTOR_OFFSET] = arg;
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
ide_raw_taskfile(drive, &args, NULL);
|
|
drive->acoustic = arg;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* drive->addressing:
|
|
* 0: 28-bit
|
|
* 1: 48-bit
|
|
* 2: 48-bit capable doing 28-bit
|
|
*/
|
|
static int set_lba_addressing(ide_drive_t *drive, int arg)
|
|
{
|
|
drive->addressing = 0;
|
|
|
|
if (HWIF(drive)->no_lba48)
|
|
return 0;
|
|
|
|
if (!idedisk_supports_lba48(drive->id))
|
|
return -EIO;
|
|
drive->addressing = arg;
|
|
return 0;
|
|
}
|
|
|
|
static void idedisk_add_settings(ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL);
|
|
ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL);
|
|
ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
|
|
ide_add_setting(drive, "address", SETTING_RW, HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, TYPE_INTA, 0, 2, 1, 1, &drive->addressing, set_lba_addressing);
|
|
ide_add_setting(drive, "bswap", SETTING_READ, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->bswap, NULL);
|
|
ide_add_setting(drive, "multcount", id ? SETTING_RW : SETTING_READ, HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, TYPE_BYTE, 0, id ? id->max_multsect : 0, 1, 1, &drive->mult_count, set_multcount);
|
|
ide_add_setting(drive, "nowerr", SETTING_RW, HDIO_GET_NOWERR, HDIO_SET_NOWERR, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr);
|
|
ide_add_setting(drive, "lun", SETTING_RW, -1, -1, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL);
|
|
ide_add_setting(drive, "wcache", SETTING_RW, HDIO_GET_WCACHE, HDIO_SET_WCACHE, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache);
|
|
ide_add_setting(drive, "acoustic", SETTING_RW, HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic);
|
|
ide_add_setting(drive, "failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL);
|
|
ide_add_setting(drive, "max_failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL);
|
|
}
|
|
|
|
static void idedisk_setup (ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
unsigned long long capacity;
|
|
int barrier;
|
|
|
|
idedisk_add_settings(drive);
|
|
|
|
if (drive->id_read == 0)
|
|
return;
|
|
|
|
/*
|
|
* CompactFlash cards and their brethern look just like hard drives
|
|
* to us, but they are removable and don't have a doorlock mechanism.
|
|
*/
|
|
if (drive->removable && !(drive->is_flash)) {
|
|
/*
|
|
* Removable disks (eg. SYQUEST); ignore 'WD' drives
|
|
*/
|
|
if (id->model[0] != 'W' || id->model[1] != 'D') {
|
|
drive->doorlocking = 1;
|
|
}
|
|
}
|
|
|
|
(void)set_lba_addressing(drive, 1);
|
|
|
|
if (drive->addressing == 1) {
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
int max_s = 2048;
|
|
|
|
if (max_s > hwif->rqsize)
|
|
max_s = hwif->rqsize;
|
|
|
|
blk_queue_max_sectors(drive->queue, max_s);
|
|
}
|
|
|
|
printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2);
|
|
|
|
/* calculate drive capacity, and select LBA if possible */
|
|
init_idedisk_capacity (drive);
|
|
|
|
/* limit drive capacity to 137GB if LBA48 cannot be used */
|
|
if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) {
|
|
printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
|
|
"%llu sectors (%llu MB)\n",
|
|
drive->name, (unsigned long long)drive->capacity64,
|
|
sectors_to_MB(drive->capacity64));
|
|
drive->capacity64 = 1ULL << 28;
|
|
}
|
|
|
|
if (drive->hwif->no_lba48_dma && drive->addressing) {
|
|
if (drive->capacity64 > 1ULL << 28) {
|
|
printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will"
|
|
" be used for accessing sectors > %u\n",
|
|
drive->name, 1 << 28);
|
|
} else
|
|
drive->addressing = 0;
|
|
}
|
|
|
|
/*
|
|
* if possible, give fdisk access to more of the drive,
|
|
* by correcting bios_cyls:
|
|
*/
|
|
capacity = idedisk_capacity (drive);
|
|
if (!drive->forced_geom) {
|
|
|
|
if (idedisk_supports_lba48(drive->id)) {
|
|
/* compatibility */
|
|
drive->bios_sect = 63;
|
|
drive->bios_head = 255;
|
|
}
|
|
|
|
if (drive->bios_sect && drive->bios_head) {
|
|
unsigned int cap0 = capacity; /* truncate to 32 bits */
|
|
unsigned int cylsz, cyl;
|
|
|
|
if (cap0 != capacity)
|
|
drive->bios_cyl = 65535;
|
|
else {
|
|
cylsz = drive->bios_sect * drive->bios_head;
|
|
cyl = cap0 / cylsz;
|
|
if (cyl > 65535)
|
|
cyl = 65535;
|
|
if (cyl > drive->bios_cyl)
|
|
drive->bios_cyl = cyl;
|
|
}
|
|
}
|
|
}
|
|
printk(KERN_INFO "%s: %llu sectors (%llu MB)",
|
|
drive->name, capacity, sectors_to_MB(capacity));
|
|
|
|
/* Only print cache size when it was specified */
|
|
if (id->buf_size)
|
|
printk (" w/%dKiB Cache", id->buf_size/2);
|
|
|
|
printk(", CHS=%d/%d/%d",
|
|
drive->bios_cyl, drive->bios_head, drive->bios_sect);
|
|
if (drive->using_dma)
|
|
ide_dma_verbose(drive);
|
|
printk("\n");
|
|
|
|
drive->no_io_32bit = id->dword_io ? 1 : 0;
|
|
|
|
/* write cache enabled? */
|
|
if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5)))
|
|
drive->wcache = 1;
|
|
|
|
write_cache(drive, 1);
|
|
|
|
/*
|
|
* We must avoid issuing commands a drive does not understand
|
|
* or we may crash it. We check flush cache is supported. We also
|
|
* check we have the LBA48 flush cache if the drive capacity is
|
|
* too large. By this time we have trimmed the drive capacity if
|
|
* LBA48 is not available so we don't need to recheck that.
|
|
*/
|
|
barrier = 0;
|
|
if (ide_id_has_flush_cache(id))
|
|
barrier = 1;
|
|
if (drive->addressing == 1) {
|
|
/* Can't issue the correct flush ? */
|
|
if (capacity > (1ULL << 28) && !ide_id_has_flush_cache_ext(id))
|
|
barrier = 0;
|
|
}
|
|
|
|
printk(KERN_INFO "%s: cache flushes %ssupported\n",
|
|
drive->name, barrier ? "" : "not ");
|
|
if (barrier) {
|
|
blk_queue_ordered(drive->queue, QUEUE_ORDERED_FLUSH);
|
|
drive->queue->prepare_flush_fn = idedisk_prepare_flush;
|
|
drive->queue->end_flush_fn = idedisk_end_flush;
|
|
blk_queue_issue_flush_fn(drive->queue, idedisk_issue_flush);
|
|
}
|
|
}
|
|
|
|
static void ide_cacheflush_p(ide_drive_t *drive)
|
|
{
|
|
if (!drive->wcache || !ide_id_has_flush_cache(drive->id))
|
|
return;
|
|
|
|
if (do_idedisk_flushcache(drive))
|
|
printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
|
|
}
|
|
|
|
static int ide_disk_remove(struct device *dev)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
struct ide_disk_obj *idkp = drive->driver_data;
|
|
struct gendisk *g = idkp->disk;
|
|
|
|
ide_cacheflush_p(drive);
|
|
|
|
ide_unregister_subdriver(drive, idkp->driver);
|
|
|
|
del_gendisk(g);
|
|
|
|
ide_disk_put(idkp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ide_disk_release(struct kref *kref)
|
|
{
|
|
struct ide_disk_obj *idkp = to_ide_disk(kref);
|
|
ide_drive_t *drive = idkp->drive;
|
|
struct gendisk *g = idkp->disk;
|
|
|
|
drive->driver_data = NULL;
|
|
drive->devfs_name[0] = '\0';
|
|
g->private_data = NULL;
|
|
put_disk(g);
|
|
kfree(idkp);
|
|
}
|
|
|
|
static int ide_disk_probe(struct device *dev);
|
|
|
|
static void ide_device_shutdown(struct device *dev)
|
|
{
|
|
ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
|
|
|
|
#ifdef CONFIG_ALPHA
|
|
/* On Alpha, halt(8) doesn't actually turn the machine off,
|
|
it puts you into the sort of firmware monitor. Typically,
|
|
it's used to boot another kernel image, so it's not much
|
|
different from reboot(8). Therefore, we don't need to
|
|
spin down the disk in this case, especially since Alpha
|
|
firmware doesn't handle disks in standby mode properly.
|
|
On the other hand, it's reasonably safe to turn the power
|
|
off when the shutdown process reaches the firmware prompt,
|
|
as the firmware initialization takes rather long time -
|
|
at least 10 seconds, which should be sufficient for
|
|
the disk to expire its write cache. */
|
|
if (system_state != SYSTEM_POWER_OFF) {
|
|
#else
|
|
if (system_state == SYSTEM_RESTART) {
|
|
#endif
|
|
ide_cacheflush_p(drive);
|
|
return;
|
|
}
|
|
|
|
printk("Shutdown: %s\n", drive->name);
|
|
dev->bus->suspend(dev, PMSG_SUSPEND);
|
|
}
|
|
|
|
static ide_driver_t idedisk_driver = {
|
|
.gen_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ide-disk",
|
|
.bus = &ide_bus_type,
|
|
.probe = ide_disk_probe,
|
|
.remove = ide_disk_remove,
|
|
.shutdown = ide_device_shutdown,
|
|
},
|
|
.version = IDEDISK_VERSION,
|
|
.media = ide_disk,
|
|
.supports_dsc_overlap = 0,
|
|
.do_request = ide_do_rw_disk,
|
|
.end_request = ide_end_request,
|
|
.error = __ide_error,
|
|
.abort = __ide_abort,
|
|
.proc = idedisk_proc,
|
|
};
|
|
|
|
static int idedisk_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct ide_disk_obj *idkp;
|
|
ide_drive_t *drive;
|
|
|
|
if (!(idkp = ide_disk_get(disk)))
|
|
return -ENXIO;
|
|
|
|
drive = idkp->drive;
|
|
|
|
drive->usage++;
|
|
if (drive->removable && drive->usage == 1) {
|
|
ide_task_t args;
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
check_disk_change(inode->i_bdev);
|
|
/*
|
|
* Ignore the return code from door_lock,
|
|
* since the open() has already succeeded,
|
|
* and the door_lock is irrelevant at this point.
|
|
*/
|
|
if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
|
|
drive->doorlocking = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int idedisk_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct ide_disk_obj *idkp = ide_disk_g(disk);
|
|
ide_drive_t *drive = idkp->drive;
|
|
|
|
if (drive->usage == 1)
|
|
ide_cacheflush_p(drive);
|
|
if (drive->removable && drive->usage == 1) {
|
|
ide_task_t args;
|
|
memset(&args, 0, sizeof(ide_task_t));
|
|
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK;
|
|
args.command_type = IDE_DRIVE_TASK_NO_DATA;
|
|
args.handler = &task_no_data_intr;
|
|
if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
|
|
drive->doorlocking = 0;
|
|
}
|
|
drive->usage--;
|
|
|
|
ide_disk_put(idkp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idedisk_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct block_device *bdev = inode->i_bdev;
|
|
struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
|
|
return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg);
|
|
}
|
|
|
|
static int idedisk_media_changed(struct gendisk *disk)
|
|
{
|
|
struct ide_disk_obj *idkp = ide_disk_g(disk);
|
|
ide_drive_t *drive = idkp->drive;
|
|
|
|
/* do not scan partitions twice if this is a removable device */
|
|
if (drive->attach) {
|
|
drive->attach = 0;
|
|
return 0;
|
|
}
|
|
/* if removable, always assume it was changed */
|
|
return drive->removable;
|
|
}
|
|
|
|
static int idedisk_revalidate_disk(struct gendisk *disk)
|
|
{
|
|
struct ide_disk_obj *idkp = ide_disk_g(disk);
|
|
set_capacity(disk, idedisk_capacity(idkp->drive));
|
|
return 0;
|
|
}
|
|
|
|
static struct block_device_operations idedisk_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = idedisk_open,
|
|
.release = idedisk_release,
|
|
.ioctl = idedisk_ioctl,
|
|
.media_changed = idedisk_media_changed,
|
|
.revalidate_disk= idedisk_revalidate_disk
|
|
};
|
|
|
|
MODULE_DESCRIPTION("ATA DISK Driver");
|
|
|
|
static int ide_disk_probe(struct device *dev)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
struct ide_disk_obj *idkp;
|
|
struct gendisk *g;
|
|
|
|
/* strstr("foo", "") is non-NULL */
|
|
if (!strstr("ide-disk", drive->driver_req))
|
|
goto failed;
|
|
if (!drive->present)
|
|
goto failed;
|
|
if (drive->media != ide_disk)
|
|
goto failed;
|
|
|
|
idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
|
|
if (!idkp)
|
|
goto failed;
|
|
|
|
g = alloc_disk_node(1 << PARTN_BITS,
|
|
hwif_to_node(drive->hwif));
|
|
if (!g)
|
|
goto out_free_idkp;
|
|
|
|
ide_init_disk(g, drive);
|
|
|
|
ide_register_subdriver(drive, &idedisk_driver);
|
|
|
|
kref_init(&idkp->kref);
|
|
|
|
idkp->drive = drive;
|
|
idkp->driver = &idedisk_driver;
|
|
idkp->disk = g;
|
|
|
|
g->private_data = &idkp->driver;
|
|
|
|
drive->driver_data = idkp;
|
|
|
|
idedisk_setup(drive);
|
|
if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
|
|
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
|
|
drive->name, drive->head);
|
|
drive->attach = 0;
|
|
} else
|
|
drive->attach = 1;
|
|
|
|
g->minors = 1 << PARTN_BITS;
|
|
strcpy(g->devfs_name, drive->devfs_name);
|
|
g->driverfs_dev = &drive->gendev;
|
|
g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
|
|
set_capacity(g, idedisk_capacity(drive));
|
|
g->fops = &idedisk_ops;
|
|
add_disk(g);
|
|
return 0;
|
|
|
|
out_free_idkp:
|
|
kfree(idkp);
|
|
failed:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __exit idedisk_exit (void)
|
|
{
|
|
driver_unregister(&idedisk_driver.gen_driver);
|
|
}
|
|
|
|
static int __init idedisk_init(void)
|
|
{
|
|
return driver_register(&idedisk_driver.gen_driver);
|
|
}
|
|
|
|
module_init(idedisk_init);
|
|
module_exit(idedisk_exit);
|
|
MODULE_LICENSE("GPL");
|