android_kernel_xiaomi_sm8350/drivers/usb/misc/Kconfig
Michael Hund 343a65cadb [PATCH] USB: change ldusb's experimental state
Signed-off-by: Michael Hund <mhund@ld-didactic.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-13 21:33:39 -08:00

163 lines
5.0 KiB
Plaintext

#
# USB Miscellaneous driver configuration
#
comment "USB Miscellaneous drivers"
depends on USB
config USB_EMI62
tristate "EMI 6|2m USB Audio interface support"
depends on USB
---help---
This driver loads firmware to Emagic EMI 6|2m low latency USB
Audio and Midi interface.
After firmware load the device is handled with standard linux
USB Audio driver.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called audio. If you want to compile it as a
module, say M here and read <file:Documentation/kbuild/modules.txt>.
config USB_EMI26
tristate "EMI 2|6 USB Audio interface support"
depends on USB
---help---
This driver loads firmware to Emagic EMI 2|6 low latency USB
Audio interface.
After firmware load the device is handled with standard linux
USB Audio driver.
To compile this driver as a module, choose M here: the
module will be called emi26.
config USB_AUERSWALD
tristate "USB Auerswald ISDN support (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
help
Say Y here if you want to connect an Auerswald USB ISDN Device
to your computer's USB port.
To compile this driver as a module, choose M here: the
module will be called auerswald.
config USB_RIO500
tristate "USB Diamond Rio500 support (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
help
Say Y here if you want to connect a USB Rio500 mp3 player to your
computer's USB port. Please read <file:Documentation/usb/rio.txt>
for more information.
To compile this driver as a module, choose M here: the
module will be called rio500.
config USB_LEGOTOWER
tristate "USB Lego Infrared Tower support (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
help
Say Y here if you want to connect a USB Lego Infrared Tower to your
computer's USB port.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called legousbtower. If you want to compile it as
a module, say M here and read
<file:Documentation/kbuild/modules.txt>.
config USB_LCD
tristate "USB LCD driver support"
depends on USB
help
Say Y here if you want to connect an USBLCD to your computer's
USB port. The USBLCD is a small USB interface board for
alphanumeric LCD modules. See <http://www.usblcd.de/> for more
information.
To compile this driver as a module, choose M here: the
module will be called usblcd.
config USB_LED
tristate "USB LED driver support"
depends on USB
help
Say Y here if you want to connect an USBLED device to your
computer's USB port.
To compile this driver as a module, choose M here: the
module will be called usbled.
config USB_CYTHERM
tristate "Cypress USB thermometer driver support"
depends on USB
help
Say Y here if you want to connect a Cypress USB thermometer
device to your computer's USB port. This device is also known
as the Cypress USB Starter kit or demo board. The Elektor
magazine published a modified version of this device in issue
#291.
To compile this driver as a module, choose M here: the
module will be called cytherm.
config USB_PHIDGETKIT
tristate "USB PhidgetKit support"
depends on USB
help
Say Y here if you want to connect a PhidgetKit USB device from
Phidgets Inc.
To compile this driver as a module, choose M here: the
module will be called phidgetkit.
config USB_PHIDGETSERVO
tristate "USB PhidgetServo support"
depends on USB
help
Say Y here if you want to connect an 1 or 4 Motor PhidgetServo
servo controller version 2.0 or 3.0.
Phidgets Inc. has a web page at <http://www.phidgets.com/>.
To compile this driver as a module, choose M here: the
module will be called phidgetservo.
config USB_IDMOUSE
tristate "Siemens ID USB Mouse Fingerprint sensor support"
depends on USB
help
Say Y here if you want to use the fingerprint sensor on
the Siemens ID Mouse. There is also a Siemens ID Mouse
_Professional_, which has not been tested with this driver,
but uses the same sensor and may therefore work.
This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
See also <http://www.fs.tum.de/~echtler/idmouse/>.
source "drivers/usb/misc/sisusbvga/Kconfig"
config USB_LD
tristate "USB LD driver"
depends on USB
help
This driver is for generic USB devices that use interrupt transfers,
like LD Didactic's USB devices.
To compile this driver as a module, choose M here: the
module will be called ldusb.
config USB_TEST
tristate "USB testing driver (DEVELOPMENT)"
depends on USB && USB_DEVICEFS && EXPERIMENTAL
help
This driver is for testing host controller software. It is used
with specialized device firmware for regression and stress testing,
to help prevent problems from cropping up with "real" drivers.
See <http://www.linux-usb.org/usbtest/> for more information,
including sample test device firmware and "how to use it".