546be91915
We have a board port in arch/powerpc so we dont need this one anymore. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
347 lines
9.2 KiB
C
347 lines
9.2 KiB
C
/*
|
|
*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004 Red Hat, Inc.
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc.
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/immap_cpm2.h>
|
|
#include <asm/mpc8260.h>
|
|
#include <asm/cpm2.h>
|
|
|
|
#include "m82xx_pci.h"
|
|
|
|
/*
|
|
* Interrupt routing
|
|
*/
|
|
|
|
static inline int
|
|
pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|
{
|
|
static char pci_irq_table[][4] =
|
|
/*
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
* A B C D
|
|
*/
|
|
{
|
|
{ PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
|
|
{ PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
|
|
{ PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
|
|
};
|
|
|
|
const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
}
|
|
|
|
static void
|
|
pq2pci_mask_irq(unsigned int irq)
|
|
{
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pq2pci_unmask_irq(unsigned int irq)
|
|
{
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pq2pci_mask_and_ack(unsigned int irq)
|
|
{
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pq2pci_end_irq(unsigned int irq)
|
|
{
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
struct hw_interrupt_type pq2pci_ic = {
|
|
"PQ2 PCI",
|
|
NULL,
|
|
NULL,
|
|
pq2pci_unmask_irq,
|
|
pq2pci_mask_irq,
|
|
pq2pci_mask_and_ack,
|
|
pq2pci_end_irq,
|
|
0
|
|
};
|
|
|
|
static irqreturn_t
|
|
pq2pci_irq_demux(int irq, void *dev_id)
|
|
{
|
|
unsigned long stat, mask, pend;
|
|
int bit;
|
|
|
|
for(;;) {
|
|
stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
|
|
mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
|
|
pend = stat & ~mask & 0xf0000000;
|
|
if (!pend)
|
|
break;
|
|
for (bit = 0; pend != 0; ++bit, pend <<= 1) {
|
|
if (pend & 0x80000000)
|
|
__do_IRQ(NR_CPM_INTS + bit);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction pq2pci_irqaction = {
|
|
.handler = pq2pci_irq_demux,
|
|
.flags = IRQF_DISABLED,
|
|
.mask = CPU_MASK_NONE,
|
|
.name = "PQ2 PCI cascade",
|
|
};
|
|
|
|
|
|
void
|
|
pq2pci_init_irq(void)
|
|
{
|
|
int irq;
|
|
volatile cpm2_map_t *immap = cpm2_immr;
|
|
for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
|
|
irq_desc[irq].chip = &pq2pci_ic;
|
|
|
|
/* make PCI IRQ level sensitive */
|
|
immap->im_intctl.ic_siexr &=
|
|
~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
|
|
|
|
/* mask all PCI interrupts */
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
|
|
|
|
/* install the demultiplexer for the PCI cascade interrupt */
|
|
setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
|
|
return;
|
|
}
|
|
|
|
static int
|
|
pq2pci_exclude_device(u_char bus, u_char devfn)
|
|
{
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/* PCI bus configuration registers.
|
|
*/
|
|
static void
|
|
pq2ads_setup_pci(struct pci_controller *hose)
|
|
{
|
|
__u32 val;
|
|
volatile cpm2_map_t *immap = cpm2_immr;
|
|
bd_t* binfo = (bd_t*) __res;
|
|
u32 sccr = immap->im_clkrst.car_sccr;
|
|
uint pci_div,freq,time;
|
|
/* PCI int lowest prio */
|
|
/* Each 4 bits is a device bus request and the MS 4bits
|
|
is highest priority */
|
|
/* Bus 4bit value
|
|
--- ----------
|
|
CPM high 0b0000
|
|
CPM middle 0b0001
|
|
CPM low 0b0010
|
|
PCI request 0b0011
|
|
Reserved 0b0100
|
|
Reserved 0b0101
|
|
Internal Core 0b0110
|
|
External Master 1 0b0111
|
|
External Master 2 0b1000
|
|
External Master 3 0b1001
|
|
The rest are reserved
|
|
*/
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
|
|
/* park bus on core */
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
|
|
/*
|
|
* Set up master windows that allow the CPU to access PCI space. These
|
|
* windows are set up using the two SIU PCIBR registers.
|
|
*/
|
|
|
|
immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
|
|
immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
|
|
|
|
#ifdef M82xx_PCI_SEC_WND_SIZE
|
|
immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
|
|
immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
|
|
#endif
|
|
|
|
/* Enable PCI */
|
|
immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
|
|
|
|
pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
|
|
( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
|
|
freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
|
|
time = (int)66666666/freq;
|
|
|
|
/* due to PCI Local Bus spec, some devices needs to wait such a long
|
|
time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
|
|
printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
|
|
(time==1) ? "0.5 seconds":"1 second" );
|
|
|
|
{
|
|
int i;
|
|
for(i=0;i<(500*time);i++)
|
|
udelay(1000);
|
|
}
|
|
|
|
/* setup ATU registers */
|
|
immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
|
|
((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
|
|
immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
|
|
immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
|
|
|
|
/* Set-up non-prefetchable window */
|
|
immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
|
|
immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
|
|
immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
|
|
|
|
/* Set-up prefetchable window */
|
|
immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
|
|
(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
|
|
immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
|
|
immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
|
|
|
|
/* Inbound transactions from PCI memory space */
|
|
immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
|
|
((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
|
|
immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
|
|
immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
|
|
|
|
/* park bus on PCI */
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
|
|
|
|
/* Enable bus mastering and inbound memory transactions */
|
|
early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
|
|
val &= 0xffff0000;
|
|
val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
|
|
early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
|
|
|
|
}
|
|
|
|
void __init pq2_find_bridges(void)
|
|
{
|
|
extern int pci_assign_all_buses;
|
|
struct pci_controller * hose;
|
|
int host_bridge;
|
|
|
|
pci_assign_all_buses = 1;
|
|
|
|
hose = pcibios_alloc_controller();
|
|
|
|
if (!hose)
|
|
return;
|
|
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
|
|
hose->first_busno = 0;
|
|
hose->bus_offset = 0;
|
|
hose->last_busno = 0xff;
|
|
|
|
setup_m8260_indirect_pci(hose,
|
|
(unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
|
|
(unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
|
|
|
|
/* Make sure it is a supported bridge */
|
|
early_read_config_dword(hose,
|
|
0,
|
|
PCI_DEVFN(0,0),
|
|
PCI_VENDOR_ID,
|
|
&host_bridge);
|
|
switch (host_bridge) {
|
|
case PCI_DEVICE_ID_MPC8265:
|
|
break;
|
|
case PCI_DEVICE_ID_MPC8272:
|
|
break;
|
|
default:
|
|
printk("Attempting to use unrecognized host bridge ID"
|
|
" 0x%08x.\n", host_bridge);
|
|
break;
|
|
}
|
|
|
|
pq2ads_setup_pci(hose);
|
|
|
|
hose->io_space.start = M82xx_PCI_LOWER_IO;
|
|
hose->io_space.end = M82xx_PCI_UPPER_IO;
|
|
hose->mem_space.start = M82xx_PCI_LOWER_MEM;
|
|
hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
|
|
hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
|
|
|
|
isa_io_base =
|
|
(unsigned long) ioremap(M82xx_PCI_IO_BASE,
|
|
M82xx_PCI_IO_SIZE);
|
|
hose->io_base_virt = (void *) isa_io_base;
|
|
|
|
/* setup resources */
|
|
pci_init_resource(&hose->mem_resources[0],
|
|
M82xx_PCI_LOWER_MEM,
|
|
M82xx_PCI_UPPER_MEM,
|
|
IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
|
|
|
|
pci_init_resource(&hose->mem_resources[1],
|
|
M82xx_PCI_LOWER_MMIO,
|
|
M82xx_PCI_UPPER_MMIO,
|
|
IORESOURCE_MEM, "PCI memory");
|
|
|
|
pci_init_resource(&hose->io_resource,
|
|
M82xx_PCI_LOWER_IO,
|
|
M82xx_PCI_UPPER_IO,
|
|
IORESOURCE_IO | 1, "PCI I/O");
|
|
|
|
ppc_md.pci_exclude_device = pq2pci_exclude_device;
|
|
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
|
|
|
|
ppc_md.pci_map_irq = pq2pci_map_irq;
|
|
ppc_md.pcibios_fixup = NULL;
|
|
ppc_md.pcibios_fixup_bus = NULL;
|
|
|
|
}
|