lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f896424cbc
android_kernel_xiaomi_sm8350/drivers/net/b44.h
John W. Linville 9f38c636ab [PATCH] b44: alternate allocation option for DMA descriptors 
This is a (final?) hack to support the odd DMA allocation requirements
of the b44 hardware.  The b44 hardware has a 30-bit DMA mask.  On x86,
anything less than a 32-bit DMA mask forces allocations into the 16MB
GFP_DMA range.  The memory there is somewhat limited, often resulting
in an inability to initialize the b44 driver.

This hack uses streaming DMA allocation APIs in order to provide an
alternative in case the GFP_DMA allocation fails.  It is somewhat ugly,
but not much worse than the similar existing hacks to support SKB
allocations in the same driver.  FWIW, I have received positive
feedback on this from several Fedora users.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:27:13 -04:00

430 lines
20 KiB
C
Raw Blame History

#ifndef _B44_H
#define _B44_H
/* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */
#define B44_DEVCTRL 0x0000UL /* Device Control */
#define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */
#define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */
#define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */
#define DEVCTRL_EPR 0x00008000 /* EPHY Reset */
#define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */
#define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */
#define DEVCTRL_PADDR 0x0007c000 /* PHY Address */
#define DEVCTRL_PADDR_SHIFT 18
#define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */
#define B44_WKUP_LEN 0x0010UL /* Wakeup Length */
#define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */
#define WKUP_LEN_D0 0x00000080
#define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */
#define WKUP_LEN_P1_SHIFT 8
#define WKUP_LEN_D1 0x00008000
#define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */
#define WKUP_LEN_P2_SHIFT 16
#define WKUP_LEN_D2 0x00000000
#define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */
#define WKUP_LEN_P3_SHIFT 24
#define WKUP_LEN_D3 0x80000000
#define B44_ISTAT 0x0020UL /* Interrupt Status */
#define ISTAT_LS 0x00000020 /* Link Change (B0 only) */
#define ISTAT_PME 0x00000040 /* Power Management Event */
#define ISTAT_TO 0x00000080 /* General Purpose Timeout */
#define ISTAT_DSCE 0x00000400 /* Descriptor Error */
#define ISTAT_DATAE 0x00000800 /* Data Error */
#define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */
#define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */
#define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */
#define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */
#define ISTAT_RX 0x00010000 /* RX Interrupt */
#define ISTAT_TX 0x01000000 /* TX Interrupt */
#define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */
#define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */
#define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */
#define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU)
#define B44_IMASK 0x0024UL /* Interrupt Mask */
#define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX)
#define B44_GPTIMER 0x0028UL /* General Purpose Timer */
#define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */
#define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */
#define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */
#define B44_FILT_DATA 0x0094UL /* ENET Filter Data */
#define B44_TXBURST 0x00A0UL /* TX Max Burst Length */
#define B44_RXBURST 0x00A4UL /* RX Max Burst Length */
#define B44_MAC_CTRL 0x00A8UL /* MAC Control */
#define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */
#define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */
#define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */
#define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */
#define MAC_CTRL_PHY_LEDCTRL_SHIFT 5
#define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */
#define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */
#define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */
#define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */
#define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */
#define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */
#define RCV_LAZY_FC_SHIFT 24
#define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */
#define DMATX_CTRL_ENABLE 0x00000001 /* Enable */
#define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */
#define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */
#define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */
#define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */
#define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */
#define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */
#define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */
#define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
#define DMATX_STAT_SMASK 0x0000f000 /* State Mask */
#define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */
#define DMATX_STAT_SACTIVE 0x00001000 /* State Active */
#define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */
#define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */
#define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */
#define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */
#define DMATX_STAT_ENONE 0x00000000 /* Error None */
#define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
#define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */
#define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */
#define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
#define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */
#define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */
#define DMARX_CTRL_ENABLE 0x00000001 /* Enable */
#define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */
#define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */
#define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */
#define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */
#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */
#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */
#define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */
#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */
#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */
#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */
#define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */
#define DMARX_STAT_ENONE 0x00000000 /* Error None */
#define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
#define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */
#define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */
#define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
#define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */
#define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */
#define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */
#define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */
#define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */
#define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */
#define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */
#define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */
#define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */
#define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */
#define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */
#define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */
#define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */
#define B44_RXCONFIG 0x0400UL /* EMAC RX Config */
#define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */
#define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */
#define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */
#define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */
#define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */
#define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */
#define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
#define RXCONFIG_RFILT 0x00000080 /* Reject Filter */
#define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */
#define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */
#define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */
#define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */
#define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */
#define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */
#define MDIO_DATA_DATA 0x0000ffff /* R/W Data */
#define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */
#define MDIO_DATA_TA_SHIFT 16
#define MDIO_TA_VALID 2
#define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */
#define MDIO_DATA_RA_SHIFT 18
#define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */
#define MDIO_DATA_PMD_SHIFT 23
#define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */
#define MDIO_DATA_OP_SHIFT 28
#define MDIO_OP_WRITE 1
#define MDIO_OP_READ 2
#define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */
#define MDIO_DATA_SB_SHIFT 30
#define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */
#define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */
#define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */
#define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */
#define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */
#define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */
#define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */
#define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */
#define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */
#define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */
#define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */
#define CAM_CTRL_MSEL 0x00000002 /* Mask Select */
#define CAM_CTRL_READ 0x00000004 /* Read */
#define CAM_CTRL_WRITE 0x00000008 /* Read */
#define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */
#define CAM_CTRL_INDEX_SHIFT 16
#define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */
#define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */
#define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */
#define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */
#define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */
#define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */
#define B44_TX_CTRL 0x0430UL /* EMAC TX Control */
#define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */
#define TX_CTRL_FMODE 0x00000002 /* Flow Mode */
#define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */
#define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */
#define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */
#define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */
#define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */
#define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */
#define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */
#define B44_TX_O 0x0508UL /* MIB TX Octets */
#define B44_TX_P 0x050CUL /* MIB TX Packets */
#define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */
#define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */
#define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */
#define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */
#define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */
#define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */
#define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */
#define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */
#define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */
#define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */
#define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */
#define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */
#define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */
#define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */
#define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */
#define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */
#define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */
#define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */
#define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */
#define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */
#define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */
#define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */
#define B44_RX_O 0x0588UL /* MIB RX Octets */
#define B44_RX_P 0x058CUL /* MIB RX Packets */
#define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */
#define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */
#define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */
#define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */
#define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */
#define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */
#define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */
#define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */
#define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */
#define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */
#define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */
#define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */
#define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */
#define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */
#define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */
#define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */
#define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */
#define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */
#define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */
/* Silicon backplane register definitions */
#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */
#define SBIMSTATE_PC 0x0000000f /* Pipe Count */
#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */
#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */
#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */
#define SBIMSTATE_IBE 0x00020000 /* In Band Error */
#define SBIMSTATE_TO 0x00040000 /* Timeout */
#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */
#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */
#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */
#define SBTMSLOW_RESET 0x00000001 /* Reset */
#define SBTMSLOW_REJECT 0x00000002 /* Reject */
#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */
#define SBTMSLOW_BE 0x80000000 /* BIST Enable */
#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */
#define SBTMSHIGH_SERR 0x00000001 /* S-error */
#define SBTMSHIGH_INT 0x00000002 /* Interrupt */
#define SBTMSHIGH_BUSY 0x00000004 /* Busy */
#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */
#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */
#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */
#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */
#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */
#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */
#define SBIDHIGH_CC_SHIFT 4
#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */
#define SBIDHIGH_VC_SHIFT 16
/* SSB PCI config space registers. */
#define SSB_BAR0_WIN 0x80
#define SSB_BAR1_WIN 0x84
#define SSB_SPROM_CONTROL 0x88
#define SSB_BAR1_CONTROL 0x8c
/* SSB core and host control registers. */
#define SSB_CONTROL 0x0000UL
#define SSB_ARBCONTROL 0x0010UL
#define SSB_ISTAT 0x0020UL
#define SSB_IMASK 0x0024UL
#define SSB_MBOX 0x0028UL
#define SSB_BCAST_ADDR 0x0050UL
#define SSB_BCAST_DATA 0x0054UL
#define SSB_PCI_TRANS_0 0x0100UL
#define SSB_PCI_TRANS_1 0x0104UL
#define SSB_PCI_TRANS_2 0x0108UL
#define SSB_SPROM 0x0800UL
#define SSB_PCI_MEM 0x00000000
#define SSB_PCI_IO 0x00000001
#define SSB_PCI_CFG0 0x00000002
#define SSB_PCI_CFG1 0x00000003
#define SSB_PCI_PREF 0x00000004
#define SSB_PCI_BURST 0x00000008
#define SSB_PCI_MASK0 0xfc000000
#define SSB_PCI_MASK1 0xfc000000
#define SSB_PCI_MASK2 0xc0000000
/* 4400 PHY registers */
#define B44_MII_AUXCTRL 24 /* Auxiliary Control */
#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */
#define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */
#define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */
#define B44_MII_ALEDCTRL 26 /* Activity LED */
#define MII_ALEDCTRL_ALLMSK 0x7fff
#define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */
#define MII_TLEDCTRL_ENABLE 0x0040
struct dma_desc {
u32 ctrl;
u32 addr;
};
/* There are only 12 bits in the DMA engine for descriptor offsetting
* so the table must be aligned on a boundary of this.
*/
#define DMA_TABLE_BYTES 4096
#define DESC_CTRL_LEN 0x00001fff
#define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */
#define DESC_CTRL_EOT 0x10000000 /* End of Table */
#define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */
#define DESC_CTRL_EOF 0x40000000 /* End of Frame */
#define DESC_CTRL_SOF 0x80000000 /* Start of Frame */
#define RX_COPY_THRESHOLD 256
struct rx_header {
u16 len;
u16 flags;
u16 pad[12];
};
#define RX_HEADER_LEN 28
#define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */
#define RX_FLAG_CRCERR 0x00000002 /* CRC Error */
#define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */
#define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */
#define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */
#define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */
#define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */
#define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */
#define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */
#define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO)
struct ring_info {
struct sk_buff *skb;
DECLARE_PCI_UNMAP_ADDR(mapping);
};
#define B44_MCAST_TABLE_SIZE 32
/* SW copy of device statistics, kept up to date by periodic timer
* which probes HW values. Must have same relative layout as HW
* register above, because b44_stats_update depends upon this.
*/
struct b44_hw_stats {
u32 tx_good_octets, tx_good_pkts, tx_octets;
u32 tx_pkts, tx_broadcast_pkts, tx_multicast_pkts;
u32 tx_len_64, tx_len_65_to_127, tx_len_128_to_255;
u32 tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max;
u32 tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts;
u32 tx_underruns, tx_total_cols, tx_single_cols;
u32 tx_multiple_cols, tx_excessive_cols, tx_late_cols;
u32 tx_defered, tx_carrier_lost, tx_pause_pkts;
u32 __pad1[8];
u32 rx_good_octets, rx_good_pkts, rx_octets;
u32 rx_pkts, rx_broadcast_pkts, rx_multicast_pkts;
u32 rx_len_64, rx_len_65_to_127, rx_len_128_to_255;
u32 rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max;
u32 rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts;
u32 rx_missed_pkts, rx_crc_align_errs, rx_undersize;
u32 rx_crc_errs, rx_align_errs, rx_symbol_errs;
u32 rx_pause_pkts, rx_nonpause_pkts;
};
struct b44 {
spinlock_t lock;
u32 imask, istat;
struct dma_desc *rx_ring, *tx_ring;
u32 tx_prod, tx_cons;
u32 rx_prod, rx_cons;
struct ring_info *rx_buffers;
struct ring_info *tx_buffers;
u32 dma_offset;
u32 flags;
#define B44_FLAG_INIT_COMPLETE 0x00000001
#define B44_FLAG_BUGGY_TXPTR 0x00000002
#define B44_FLAG_REORDER_BUG 0x00000004
#define B44_FLAG_PAUSE_AUTO 0x00008000
#define B44_FLAG_FULL_DUPLEX 0x00010000
#define B44_FLAG_100_BASE_T 0x00020000
#define B44_FLAG_TX_PAUSE 0x00040000
#define B44_FLAG_RX_PAUSE 0x00080000
#define B44_FLAG_FORCE_LINK 0x00100000
#define B44_FLAG_ADV_10HALF 0x01000000
#define B44_FLAG_ADV_10FULL 0x02000000
#define B44_FLAG_ADV_100HALF 0x04000000
#define B44_FLAG_ADV_100FULL 0x08000000
#define B44_FLAG_INTERNAL_PHY 0x10000000
#define B44_FLAG_RX_RING_HACK 0x20000000
#define B44_FLAG_TX_RING_HACK 0x40000000
u32 rx_offset;
u32 msg_enable;
struct timer_list timer;
struct net_device_stats stats;
struct b44_hw_stats hw_stats;
void __iomem *regs;
struct pci_dev *pdev;
struct net_device *dev;
dma_addr_t rx_ring_dma, tx_ring_dma;
u32 rx_pending;
u32 tx_pending;
u8 phy_addr;
u8 core_unit;
struct mii_if_info mii_if;
};
#endif /* _B44_H */
Reference in New Issue View Git Blame Copy Permalink