android_kernel_xiaomi_sm8350/drivers/gpu/drm/i915/i915_irq.c
Zhenyu Wang 036a4a7d92 drm/i915: handle interrupt on new chipset
Update interrupt handling methods for IGDNG with new registers
for display and graphics interrupt functions. As we won't use
irq-based vblank sync in dri2, so display interrupt on new chip
will be used for hotplug only in future.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 11:15:27 -07:00

819 lines
22 KiB
C

/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_drv.h"
#define MAX_NOPID ((u32)~0)
/**
* Interrupts that are always left unmasked.
*
* Since pipe events are edge-triggered from the PIPESTAT register to IIR,
* we leave them always unmasked in IMR and then control enabling them through
* PIPESTAT alone.
*/
#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
/** Interrupts that we mask and unmask at runtime. */
#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
#define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\
PIPE_VBLANK_INTERRUPT_STATUS)
#define I915_PIPE_VBLANK_ENABLE (PIPE_START_VBLANK_INTERRUPT_ENABLE |\
PIPE_VBLANK_INTERRUPT_ENABLE)
#define DRM_I915_VBLANK_PIPE_ALL (DRM_I915_VBLANK_PIPE_A | \
DRM_I915_VBLANK_PIPE_B)
void
igdng_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->gt_irq_mask_reg & mask) != 0) {
dev_priv->gt_irq_mask_reg &= ~mask;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
(void) I915_READ(GTIMR);
}
}
static inline void
igdng_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->gt_irq_mask_reg & mask) != mask) {
dev_priv->gt_irq_mask_reg |= mask;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
(void) I915_READ(GTIMR);
}
}
/* For display hotplug interrupt */
void
igdng_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask_reg & mask) != 0) {
dev_priv->irq_mask_reg &= ~mask;
I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
(void) I915_READ(DEIMR);
}
}
static inline void
igdng_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask_reg & mask) != mask) {
dev_priv->irq_mask_reg |= mask;
I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
(void) I915_READ(DEIMR);
}
}
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask_reg & mask) != 0) {
dev_priv->irq_mask_reg &= ~mask;
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IMR);
}
}
static inline void
i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask_reg & mask) != mask) {
dev_priv->irq_mask_reg |= mask;
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IMR);
}
}
static inline u32
i915_pipestat(int pipe)
{
if (pipe == 0)
return PIPEASTAT;
if (pipe == 1)
return PIPEBSTAT;
BUG();
}
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
if ((dev_priv->pipestat[pipe] & mask) != mask) {
u32 reg = i915_pipestat(pipe);
dev_priv->pipestat[pipe] |= mask;
/* Enable the interrupt, clear any pending status */
I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
(void) I915_READ(reg);
}
}
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
if ((dev_priv->pipestat[pipe] & mask) != 0) {
u32 reg = i915_pipestat(pipe);
dev_priv->pipestat[pipe] &= ~mask;
I915_WRITE(reg, dev_priv->pipestat[pipe]);
(void) I915_READ(reg);
}
}
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
* @pipe: pipe to check
*
* Reading certain registers when the pipe is disabled can hang the chip.
* Use this routine to make sure the PLL is running and the pipe is active
* before reading such registers if unsure.
*/
static int
i915_pipe_enabled(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF;
if (I915_READ(pipeconf) & PIPEACONF_ENABLE)
return 1;
return 0;
}
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long high_frame;
unsigned long low_frame;
u32 high1, high2, low, count;
high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH;
low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
/*
* High & low register fields aren't synchronized, so make sure
* we get a low value that's stable across two reads of the high
* register.
*/
do {
high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
PIPE_FRAME_HIGH_SHIFT);
low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
PIPE_FRAME_LOW_SHIFT);
high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
PIPE_FRAME_HIGH_SHIFT);
} while (high1 != high2);
count = (high1 << 8) | low;
return count;
}
u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
return I915_READ(reg);
}
/*
* Handle hotplug events outside the interrupt handler proper.
*/
static void i915_hotplug_work_func(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
/* Just fire off a uevent and let userspace tell us what to do */
drm_sysfs_hotplug_event(dev);
}
irqreturn_t igdng_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = IRQ_NONE;
u32 de_iir, gt_iir;
u32 new_de_iir, new_gt_iir;
struct drm_i915_master_private *master_priv;
de_iir = I915_READ(DEIIR);
gt_iir = I915_READ(GTIIR);
for (;;) {
if (de_iir == 0 && gt_iir == 0)
break;
ret = IRQ_HANDLED;
I915_WRITE(DEIIR, de_iir);
new_de_iir = I915_READ(DEIIR);
I915_WRITE(GTIIR, gt_iir);
new_gt_iir = I915_READ(GTIIR);
if (dev->primary->master) {
master_priv = dev->primary->master->driver_priv;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
}
if (gt_iir & GT_USER_INTERRUPT) {
dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
DRM_WAKEUP(&dev_priv->irq_queue);
}
de_iir = new_de_iir;
gt_iir = new_gt_iir;
}
return ret;
}
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv;
u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
u32 vblank_status;
u32 vblank_enable;
int vblank = 0;
unsigned long irqflags;
int irq_received;
int ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
if (IS_IGDNG(dev))
return igdng_irq_handler(dev);
iir = I915_READ(IIR);
if (IS_I965G(dev)) {
vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
} else {
vblank_status = I915_VBLANK_INTERRUPT_STATUS;
vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
}
for (;;) {
irq_received = iir != 0;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
pipeb_stats = I915_READ(PIPEBSTAT);
/*
* Clear the PIPE(A|B)STAT regs before the IIR
*/
if (pipea_stats & 0x8000ffff) {
I915_WRITE(PIPEASTAT, pipea_stats);
irq_received = 1;
}
if (pipeb_stats & 0x8000ffff) {
I915_WRITE(PIPEBSTAT, pipeb_stats);
irq_received = 1;
}
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
if (!irq_received)
break;
ret = IRQ_HANDLED;
/* Consume port. Then clear IIR or we'll miss events */
if ((I915_HAS_HOTPLUG(dev)) &&
(iir & I915_DISPLAY_PORT_INTERRUPT)) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
schedule_work(&dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
I915_WRITE(IIR, iir);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (dev->primary->master) {
master_priv = dev->primary->master->driver_priv;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
}
if (iir & I915_USER_INTERRUPT) {
dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
DRM_WAKEUP(&dev_priv->irq_queue);
}
if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
}
if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
}
if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
(iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
iir = new_iir;
}
return ret;
}
static int i915_emit_irq(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
RING_LOCALS;
i915_kernel_lost_context(dev);
DRM_DEBUG("\n");
dev_priv->counter++;
if (dev_priv->counter > 0x7FFFFFFFUL)
dev_priv->counter = 1;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_enqueue = dev_priv->counter;
BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(MI_USER_INTERRUPT);
ADVANCE_LP_RING();
return dev_priv->counter;
}
void i915_user_irq_get(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) {
if (IS_IGDNG(dev))
igdng_enable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
else
i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
}
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
void i915_user_irq_put(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
if (IS_IGDNG(dev))
igdng_disable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
else
i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
}
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
static int i915_wait_irq(struct drm_device * dev, int irq_nr)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
int ret = 0;
DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr,
READ_BREADCRUMB(dev_priv));
if (READ_BREADCRUMB(dev_priv) >= irq_nr) {
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
return 0;
}
if (master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
i915_user_irq_get(dev);
DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ,
READ_BREADCRUMB(dev_priv) >= irq_nr);
i915_user_irq_put(dev);
if (ret == -EBUSY) {
DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
}
return ret;
}
/* Needs the lock as it touches the ring.
*/
int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_emit_t *emit = data;
int result;
if (!dev_priv || !dev_priv->ring.virtual_start) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
result = i915_emit_irq(dev);
mutex_unlock(&dev->struct_mutex);
if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
DRM_ERROR("copy_to_user\n");
return -EFAULT;
}
return 0;
}
/* Doesn't need the hardware lock.
*/
int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_wait_t *irqwait = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return i915_wait_irq(dev, irqwait->irq_seq);
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
u32 pipeconf;
pipeconf = I915_READ(pipeconf_reg);
if (!(pipeconf & PIPEACONF_ENABLE))
return -EINVAL;
if (IS_IGDNG(dev))
return 0;
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
if (IS_I965G(dev))
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
i915_enable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
return 0;
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
if (IS_IGDNG(dev))
return;
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
i915_disable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE |
PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
void i915_enable_interrupt (struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!IS_IGDNG(dev))
opregion_enable_asle(dev);
dev_priv->irq_enabled = 1;
}
/* Set the vblank monitor pipe
*/
int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return 0;
}
int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
return 0;
}
/**
* Schedule buffer swap at given vertical blank.
*/
int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
/* The delayed swap mechanism was fundamentally racy, and has been
* removed. The model was that the client requested a delayed flip/swap
* from the kernel, then waited for vblank before continuing to perform
* rendering. The problem was that the kernel might wake the client
* up before it dispatched the vblank swap (since the lock has to be
* held while touching the ringbuffer), in which case the client would
* clear and start the next frame before the swap occurred, and
* flicker would occur in addition to likely missing the vblank.
*
* In the absence of this ioctl, userland falls back to a correct path
* of waiting for a vblank, then dispatching the swap on its own.
* Context switching to userland and back is plenty fast enough for
* meeting the requirements of vblank swapping.
*/
return -EINVAL;
}
/* drm_dma.h hooks
*/
static void igdng_irq_preinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
/* XXX hotplug from PCH */
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
(void) I915_READ(DEIER);
/* and GT */
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
(void) I915_READ(GTIER);
}
static int igdng_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* enable kind of interrupts always enabled */
u32 display_mask = DE_MASTER_IRQ_CONTROL /*| DE_PCH_EVENT */;
u32 render_mask = GT_USER_INTERRUPT;
dev_priv->irq_mask_reg = ~display_mask;
dev_priv->de_irq_enable_reg = display_mask;
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
I915_WRITE(DEIER, dev_priv->de_irq_enable_reg);
(void) I915_READ(DEIER);
/* user interrupt should be enabled, but masked initial */
dev_priv->gt_irq_mask_reg = 0xffffffff;
dev_priv->gt_irq_enable_reg = render_mask;
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
I915_WRITE(GTIER, dev_priv->gt_irq_enable_reg);
(void) I915_READ(GTIER);
return 0;
}
void i915_driver_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
atomic_set(&dev_priv->irq_received, 0);
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
if (IS_IGDNG(dev)) {
igdng_irq_preinstall(dev);
return;
}
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE(HWSTAM, 0xeffe);
I915_WRITE(PIPEASTAT, 0);
I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
(void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
if (IS_IGDNG(dev))
return igdng_irq_postinstall(dev);
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
dev_priv->pipestat[0] = 0;
dev_priv->pipestat[1] = 0;
if (I915_HAS_HOTPLUG(dev)) {
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
/* Leave other bits alone */
hotplug_en |= HOTPLUG_EN_MASK;
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
SDVOB_HOTPLUG_INT_STATUS;
if (IS_G4X(dev)) {
dev_priv->hotplug_supported_mask |=
HDMIB_HOTPLUG_INT_STATUS |
HDMIC_HOTPLUG_INT_STATUS |
HDMID_HOTPLUG_INT_STATUS;
}
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
}
/* Disable pipe interrupt enables, clear pending pipe status */
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
/* Clear pending interrupt status */
I915_WRITE(IIR, I915_READ(IIR));
I915_WRITE(IER, enable_mask);
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
return 0;
}
static void igdng_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
I915_WRITE(GTIIR, I915_READ(GTIIR));
}
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (!dev_priv)
return;
dev_priv->vblank_pipe = 0;
if (IS_IGDNG(dev)) {
igdng_irq_uninstall(dev);
return;
}
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(PIPEASTAT, 0);
I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
I915_WRITE(IIR, I915_READ(IIR));
}