b55f627fee
Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Paulraj, Sandeep" <s-paulraj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
132 lines
4.6 KiB
C
132 lines
4.6 KiB
C
/*
|
|
* include/linux/spi/spidev.h
|
|
*
|
|
* Copyright (C) 2006 SWAPP
|
|
* Andrea Paterniani <a.paterniani@swapp-eng.it>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef SPIDEV_H
|
|
#define SPIDEV_H
|
|
|
|
#include <linux/types.h>
|
|
|
|
/* User space versions of kernel symbols for SPI clocking modes,
|
|
* matching <linux/spi/spi.h>
|
|
*/
|
|
|
|
#define SPI_CPHA 0x01
|
|
#define SPI_CPOL 0x02
|
|
|
|
#define SPI_MODE_0 (0|0)
|
|
#define SPI_MODE_1 (0|SPI_CPHA)
|
|
#define SPI_MODE_2 (SPI_CPOL|0)
|
|
#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
|
|
|
|
#define SPI_CS_HIGH 0x04
|
|
#define SPI_LSB_FIRST 0x08
|
|
#define SPI_3WIRE 0x10
|
|
#define SPI_LOOP 0x20
|
|
#define SPI_NO_CS 0x40
|
|
#define SPI_READY 0x80
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/* IOCTL commands */
|
|
|
|
#define SPI_IOC_MAGIC 'k'
|
|
|
|
/**
|
|
* struct spi_ioc_transfer - describes a single SPI transfer
|
|
* @tx_buf: Holds pointer to userspace buffer with transmit data, or null.
|
|
* If no data is provided, zeroes are shifted out.
|
|
* @rx_buf: Holds pointer to userspace buffer for receive data, or null.
|
|
* @len: Length of tx and rx buffers, in bytes.
|
|
* @speed_hz: Temporary override of the device's bitrate.
|
|
* @bits_per_word: Temporary override of the device's wordsize.
|
|
* @delay_usecs: If nonzero, how long to delay after the last bit transfer
|
|
* before optionally deselecting the device before the next transfer.
|
|
* @cs_change: True to deselect device before starting the next transfer.
|
|
*
|
|
* This structure is mapped directly to the kernel spi_transfer structure;
|
|
* the fields have the same meanings, except of course that the pointers
|
|
* are in a different address space (and may be of different sizes in some
|
|
* cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
|
|
* Zero-initialize the structure, including currently unused fields, to
|
|
* accomodate potential future updates.
|
|
*
|
|
* SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
|
|
* Pass it an array of related transfers, they'll execute together.
|
|
* Each transfer may be half duplex (either direction) or full duplex.
|
|
*
|
|
* struct spi_ioc_transfer mesg[4];
|
|
* ...
|
|
* status = ioctl(fd, SPI_IOC_MESSAGE(4), mesg);
|
|
*
|
|
* So for example one transfer might send a nine bit command (right aligned
|
|
* in a 16-bit word), the next could read a block of 8-bit data before
|
|
* terminating that command by temporarily deselecting the chip; the next
|
|
* could send a different nine bit command (re-selecting the chip), and the
|
|
* last transfer might write some register values.
|
|
*/
|
|
struct spi_ioc_transfer {
|
|
__u64 tx_buf;
|
|
__u64 rx_buf;
|
|
|
|
__u32 len;
|
|
__u32 speed_hz;
|
|
|
|
__u16 delay_usecs;
|
|
__u8 bits_per_word;
|
|
__u8 cs_change;
|
|
__u32 pad;
|
|
|
|
/* If the contents of 'struct spi_ioc_transfer' ever change
|
|
* incompatibly, then the ioctl number (currently 0) must change;
|
|
* ioctls with constant size fields get a bit more in the way of
|
|
* error checking than ones (like this) where that field varies.
|
|
*
|
|
* NOTE: struct layout is the same in 64bit and 32bit userspace.
|
|
*/
|
|
};
|
|
|
|
/* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
|
|
#define SPI_MSGSIZE(N) \
|
|
((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
|
|
? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
|
|
#define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
|
|
|
|
|
|
/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */
|
|
#define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, __u8)
|
|
#define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, __u8)
|
|
|
|
/* Read / Write SPI bit justification */
|
|
#define SPI_IOC_RD_LSB_FIRST _IOR(SPI_IOC_MAGIC, 2, __u8)
|
|
#define SPI_IOC_WR_LSB_FIRST _IOW(SPI_IOC_MAGIC, 2, __u8)
|
|
|
|
/* Read / Write SPI device word length (1..N) */
|
|
#define SPI_IOC_RD_BITS_PER_WORD _IOR(SPI_IOC_MAGIC, 3, __u8)
|
|
#define SPI_IOC_WR_BITS_PER_WORD _IOW(SPI_IOC_MAGIC, 3, __u8)
|
|
|
|
/* Read / Write SPI device default max speed hz */
|
|
#define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, __u32)
|
|
#define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, __u32)
|
|
|
|
|
|
|
|
#endif /* SPIDEV_H */
|