lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
fad14a0da8
android_kernel_xiaomi_sm8350/drivers/usb/serial/option.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

729 lines
19 KiB
C
Raw Blame History

/*
USB Driver for GSM modems
Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
This driver is free software; you can redistribute it and/or modify
it under the terms of Version 2 of the GNU General Public License as
published by the Free Software Foundation.
Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
History: see the git log.
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
This driver exists because the "normal" serial driver doesn't work too well
with GSM modems. Issues:
- data loss -- one single Receive URB is not nearly enough
- nonstandard flow (Option devices) control
- controlling the baud rate doesn't make sense
This driver is named "option" because the most common device it's
used for is a PC-Card (with an internal OHCI-USB interface, behind
which the GSM interface sits), made by Option Inc.
Some of the "one port" devices actually exhibit multiple USB instances
on the USB bus. This is not a bug, these ports are used for different
device features.
*/
#define DRIVER_VERSION "v0.7.1"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
#define DRIVER_DESC "USB Driver for GSM modems"
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
/* Function prototypes */
static int option_open(struct usb_serial_port *port, struct file *filp);
static void option_close(struct usb_serial_port *port, struct file *filp);
static int option_startup(struct usb_serial *serial);
static void option_shutdown(struct usb_serial *serial);
static void option_rx_throttle(struct usb_serial_port *port);
static void option_rx_unthrottle(struct usb_serial_port *port);
static int option_write_room(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
static int option_write(struct usb_serial_port *port,
const unsigned char *buf, int count);
static int option_chars_in_buffer(struct usb_serial_port *port);
static int option_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg);
static void option_set_termios(struct usb_serial_port *port,
struct termios *old);
static void option_break_ctl(struct usb_serial_port *port, int break_state);
static int option_tiocmget(struct usb_serial_port *port, struct file *file);
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup(struct usb_serial_port *port);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
#define HUAWEI_VENDOR_ID 0x12D1
#define AUDIOVOX_VENDOR_ID 0x0F3D
#define NOVATELWIRELESS_VENDOR_ID 0x1410
#define ANYDATA_VENDOR_ID 0x16d5
#define OPTION_PRODUCT_OLD 0x5000
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_FUSION2 0x6300
#define OPTION_PRODUCT_COBRA 0x6500
#define OPTION_PRODUCT_COBRA2 0x6600
#define HUAWEI_PRODUCT_E600 0x1001
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_PRODUCT_ID 0x6501
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
static struct usb_device_id option_ids1[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
static struct usb_driver option_driver = {
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = option_ids,
.no_dynamic_id = 1,
};
/* The card has three separate interfaces, which the serial driver
* recognizes separately, thus num_port=1.
*/
static struct usb_serial_driver option_1port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "option1",
},
.description = "GSM modem (1-port)",
.id_table = option_ids1,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.open = option_open,
.close = option_close,
.write = option_write,
.write_room = option_write_room,
.chars_in_buffer = option_chars_in_buffer,
.throttle = option_rx_throttle,
.unthrottle = option_rx_unthrottle,
.ioctl = option_ioctl,
.set_termios = option_set_termios,
.break_ctl = option_break_ctl,
.tiocmget = option_tiocmget,
.tiocmset = option_tiocmset,
.attach = option_startup,
.shutdown = option_shutdown,
.read_int_callback = option_instat_callback,
};
#ifdef CONFIG_USB_DEBUG
static int debug;
#else
#define debug 0
#endif
/* per port private data */
#define N_IN_URB 4
#define N_OUT_URB 1
#define IN_BUFLEN 4096
#define OUT_BUFLEN 128
struct option_port_private {
/* Input endpoints and buffer for this port */
struct urb *in_urbs[N_IN_URB];
char in_buffer[N_IN_URB][IN_BUFLEN];
/* Output endpoints and buffer for this port */
struct urb *out_urbs[N_OUT_URB];
char out_buffer[N_OUT_URB][OUT_BUFLEN];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
int dtr_state;
int cts_state; /* Handshaking pins (inputs) */
int dsr_state;
int dcd_state;
int ri_state;
unsigned long tx_start_time[N_OUT_URB];
};
/* Functions used by new usb-serial code. */
static int __init option_init(void)
{
int retval;
retval = usb_serial_register(&option_1port_device);
if (retval)
goto failed_1port_device_register;
retval = usb_register(&option_driver);
if (retval)
goto failed_driver_register;
info(DRIVER_DESC ": " DRIVER_VERSION);
return 0;
failed_driver_register:
usb_serial_deregister (&option_1port_device);
failed_1port_device_register:
return retval;
}
static void __exit option_exit(void)
{
usb_deregister (&option_driver);
usb_serial_deregister (&option_1port_device);
}
module_init(option_init);
module_exit(option_exit);
static void option_rx_throttle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
static void option_rx_unthrottle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
static void option_break_ctl(struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
dbg("%s", __FUNCTION__);
}
static void option_set_termios(struct usb_serial_port *port,
struct termios *old_termios)
{
dbg("%s", __FUNCTION__);
option_send_setup(port);
}
static int option_tiocmget(struct usb_serial_port *port, struct file *file)
{
unsigned int value;
struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
((portdata->dtr_state) ? TIOCM_DTR : 0) |
((portdata->cts_state) ? TIOCM_CTS : 0) |
((portdata->dsr_state) ? TIOCM_DSR : 0) |
((portdata->dcd_state) ? TIOCM_CAR : 0) |
((portdata->ri_state) ? TIOCM_RNG : 0);
return value;
}
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
if (set & TIOCM_RTS)
portdata->rts_state = 1;
if (set & TIOCM_DTR)
portdata->dtr_state = 1;
if (clear & TIOCM_RTS)
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
return option_send_setup(port);
}
static int option_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
}
/* Write */
static int option_write(struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct option_port_private *portdata;
int i;
int left, todo;
struct urb *this_urb = NULL; /* spurious */
int err;
portdata = usb_get_serial_port_data(port);
dbg("%s: write (%d chars)", __FUNCTION__, count);
i = 0;
left = count;
for (i=0; left > 0 && i < N_OUT_URB; i++) {
todo = left;
if (todo > OUT_BUFLEN)
todo = OUT_BUFLEN;
this_urb = portdata->out_urbs[i];
if (this_urb->status == -EINPROGRESS) {
if (time_before(jiffies,
portdata->tx_start_time[i] + 10 * HZ))
continue;
usb_unlink_urb(this_urb);
continue;
}
if (this_urb->status != 0)
dbg("usb_write %p failed (err=%d)",
this_urb, this_urb->status);
dbg("%s: endpoint %d buf %d", __FUNCTION__,
usb_pipeendpoint(this_urb->pipe), i);
/* send the data */
memcpy (this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
dbg("usb_submit_urb %p (write bulk) failed "
"(%d, has %d)", this_urb,
err, this_urb->status);
continue;
}
portdata->tx_start_time[i] = jiffies;
buf += todo;
left -= todo;
}
count -= left;
dbg("%s: wrote (did %d)", __FUNCTION__, count);
return count;
}
static void option_indat_callback(struct urb *urb)
{
int err;
int endpoint;
struct usb_serial_port *port;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
dbg("%s: %p", __FUNCTION__, urb);
endpoint = usb_pipeendpoint(urb->pipe);
port = (struct usb_serial_port *) urb->context;
if (urb->status) {
dbg("%s: nonzero status: %d on endpoint %02x.",
__FUNCTION__, urb->status, endpoint);
} else {
tty = port->tty;
if (urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else {
dbg("%s: empty read urb received", __FUNCTION__);
}
/* Resubmit urb so we continue receiving */
if (port->open_count && urb->status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
printk(KERN_ERR "%s: resubmit read urb failed. "
"(%d)", __FUNCTION__, err);
}
}
return;
}
static void option_outdat_callback(struct urb *urb)
{
struct usb_serial_port *port;
dbg("%s", __FUNCTION__);
port = (struct usb_serial_port *) urb->context;
usb_serial_port_softint(port);
}
static void option_instat_callback(struct urb *urb)
{
int err;
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct option_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
dbg("%s", __FUNCTION__);
dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
if (urb->status == 0) {
struct usb_ctrlrequest *req_pkt =
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
dbg("%s: NULL req_pkt\n", __FUNCTION__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
(req_pkt->bRequest == 0x20)) {
int old_dcd_state;
unsigned char signals = *((unsigned char *)
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
dbg("%s: signal x%x", __FUNCTION__, signals);
old_dcd_state = portdata->dcd_state;
portdata->cts_state = 1;
portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
if (port->tty && !C_CLOCAL(port->tty) &&
old_dcd_state && !portdata->dcd_state)
tty_hangup(port->tty);
} else {
dbg("%s: type %x req %x", __FUNCTION__,
req_pkt->bRequestType,req_pkt->bRequest);
}
} else
dbg("%s: error %d", __FUNCTION__, urb->status);
/* Resubmit urb so we continue receiving IRQ data */
if (urb->status != -ESHUTDOWN) {
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
__FUNCTION__, err);
}
}
static int option_write_room(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
int data_len = 0;
struct urb *this_urb;
portdata = usb_get_serial_port_data(port);
for (i=0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status != -EINPROGRESS)
data_len += OUT_BUFLEN;
}
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
}
static int option_chars_in_buffer(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
int data_len = 0;
struct urb *this_urb;
portdata = usb_get_serial_port_data(port);
for (i=0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status == -EINPROGRESS)
data_len += this_urb->transfer_buffer_length;
}
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
}
static int option_open(struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
struct usb_serial *serial = port->serial;
int i, err;
struct urb *urb;
portdata = usb_get_serial_port_data(port);
dbg("%s", __FUNCTION__);
/* Set some sane defaults */
portdata->rts_state = 1;
portdata->dtr_state = 1;
/* Reset low level data toggle and start reading from endpoints */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
if (! urb)
continue;
if (urb->dev != serial->dev) {
dbg("%s: dev %p != %p", __FUNCTION__,
urb->dev, serial->dev);
continue;
}
/*
* make sure endpoint data toggle is synchronized with the
* device
*/
usb_clear_halt(urb->dev, urb->pipe);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
__FUNCTION__, i, err,
urb->transfer_buffer_length);
}
}
/* Reset low level data toggle on out endpoints */
for (i = 0; i < N_OUT_URB; i++) {
urb = portdata->out_urbs[i];
if (! urb)
continue;
urb->dev = serial->dev;
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe), 0); */
}
port->tty->low_latency = 1;
option_send_setup(port);
return (0);
}
static inline void stop_urb(struct urb *urb)
{
if (urb && urb->status == -EINPROGRESS)
usb_kill_urb(urb);
}
static void option_close(struct usb_serial_port *port, struct file *filp)
{
int i;
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
portdata = usb_get_serial_port_data(port);
portdata->rts_state = 0;
portdata->dtr_state = 0;
if (serial->dev) {
option_send_setup(port);
/* Stop reading/writing urbs */
for (i = 0; i < N_IN_URB; i++)
stop_urb(portdata->in_urbs[i]);
for (i = 0; i < N_OUT_URB; i++)
stop_urb(portdata->out_urbs[i]);
}
port->tty = NULL;
}
/* Helper functions used by option_setup_urbs */
static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
int dir, void *ctx, char *buf, int len,
void (*callback)(struct urb *))
{
struct urb *urb;
if (endpoint == -1)
return NULL; /* endpoint not needed */
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
return NULL;
}
/* Fill URB using supplied data. */
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev, endpoint) | dir,
buf, len, callback, ctx);
return urb;
}
/* Setup urbs */
static void option_setup_urbs(struct usb_serial *serial)
{
int i,j;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
/* Do indat endpoints first */
for (j = 0; j < N_IN_URB; ++j) {
portdata->in_urbs[j] = option_setup_urb (serial,
port->bulk_in_endpointAddress, USB_DIR_IN, port,
portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
}
/* outdat endpoints */
for (j = 0; j < N_OUT_URB; ++j) {
portdata->out_urbs[j] = option_setup_urb (serial,
port->bulk_out_endpointAddress, USB_DIR_OUT, port,
portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
}
}
}
static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
portdata = usb_get_serial_port_data(port);
if (port->tty) {
int val = 0;
if (portdata->dtr_state)
val |= 0x01;
if (portdata->rts_state)
val |= 0x02;
return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
}
return 0;
}
static int option_startup(struct usb_serial *serial)
{
int i, err;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dbg("%s: kmalloc for option_port_private (%d) failed!.",
__FUNCTION__, i);
return (1);
}
usb_set_serial_port_data(port, portdata);
if (! port->interrupt_in_urb)
continue;
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dbg("%s: submit irq_in urb failed %d",
__FUNCTION__, err);
}
option_setup_urbs(serial);
return (0);
}
static void option_shutdown(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
for (j = 0; j < N_IN_URB; j++)
stop_urb(portdata->in_urbs[j]);
for (j = 0; j < N_OUT_URB; j++)
stop_urb(portdata->out_urbs[j]);
}
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
for (j = 0; j < N_IN_URB; j++) {
if (portdata->in_urbs[j]) {
usb_free_urb(portdata->in_urbs[j]);
portdata->in_urbs[j] = NULL;
}
}
for (j = 0; j < N_OUT_URB; j++) {
if (portdata->out_urbs[j]) {
usb_free_urb(portdata->out_urbs[j]);
portdata->out_urbs[j] = NULL;
}
}
}
/* Now free per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
kfree(usb_get_serial_port_data(port));
}
}
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
#ifdef CONFIG_USB_DEBUG
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug messages");
#endif
Reference in New Issue View Git Blame Copy Permalink