android_kernel_xiaomi_sm8350/arch/um/include/sysdep-x86_64/ptrace.h
Allan Graves fad1c45c93 [PATCH] uml: Fix sysrq-r support for skas mode
The old code had the IP and SP coming from the registers in the thread
struct, which are completely wrong since those are the userspace
registers.  This fixes that by pulling the correct values from the
jmp_buf in which the kernel state of each thread is stored.

Signed-off-by: Allan Graves <allan.graves@oracle.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-04 13:22:01 -07:00

245 lines
8.7 KiB
C

/*
* Copyright 2003 PathScale, Inc.
*
* Licensed under the GPL
*/
#ifndef __SYSDEP_X86_64_PTRACE_H
#define __SYSDEP_X86_64_PTRACE_H
#include "uml-config.h"
#include "user_constants.h"
#include "sysdep/faultinfo.h"
#define MAX_REG_OFFSET (UM_FRAME_SIZE)
#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
#ifdef UML_CONFIG_MODE_TT
#include "sysdep/sc.h"
#endif
#ifdef UML_CONFIG_MODE_SKAS
#include "skas_ptregs.h"
#define REGS_IP(r) ((r)[HOST_IP])
#define REGS_SP(r) ((r)[HOST_SP])
#define REGS_RBX(r) ((r)[HOST_RBX])
#define REGS_RCX(r) ((r)[HOST_RCX])
#define REGS_RDX(r) ((r)[HOST_RDX])
#define REGS_RSI(r) ((r)[HOST_RSI])
#define REGS_RDI(r) ((r)[HOST_RDI])
#define REGS_RBP(r) ((r)[HOST_RBP])
#define REGS_RAX(r) ((r)[HOST_RAX])
#define REGS_R8(r) ((r)[HOST_R8])
#define REGS_R9(r) ((r)[HOST_R9])
#define REGS_R10(r) ((r)[HOST_R10])
#define REGS_R11(r) ((r)[HOST_R11])
#define REGS_R12(r) ((r)[HOST_R12])
#define REGS_R13(r) ((r)[HOST_R13])
#define REGS_R14(r) ((r)[HOST_R14])
#define REGS_R15(r) ((r)[HOST_R15])
#define REGS_CS(r) ((r)[HOST_CS])
#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
#define REGS_SS(r) ((r)[HOST_SS])
#define HOST_FS_BASE 21
#define HOST_GS_BASE 22
#define HOST_DS 23
#define HOST_ES 24
#define HOST_FS 25
#define HOST_GS 26
#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
#define REGS_DS(r) ((r)[HOST_DS])
#define REGS_ES(r) ((r)[HOST_ES])
#define REGS_FS(r) ((r)[HOST_FS])
#define REGS_GS(r) ((r)[HOST_GS])
#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
#define REGS_TRAP(r) ((r)->trap_type)
#define REGS_ERR(r) ((r)->fault_type)
#endif
#include "choose-mode.h"
/* XXX */
union uml_pt_regs {
#ifdef UML_CONFIG_MODE_TT
struct tt_regs {
long syscall;
unsigned long orig_rax;
void *sc;
struct faultinfo faultinfo;
} tt;
#endif
#ifdef UML_CONFIG_MODE_SKAS
struct skas_regs {
/* XXX */
unsigned long regs[27];
unsigned long fp[65];
struct faultinfo faultinfo;
long syscall;
int is_user;
} skas;
#endif
};
#define EMPTY_UML_PT_REGS { }
/* XXX */
extern int mode_tt;
#define UPT_RBX(r) __CHOOSE_MODE(SC_RBX(UPT_SC(r)), REGS_RBX((r)->skas.regs))
#define UPT_RCX(r) __CHOOSE_MODE(SC_RCX(UPT_SC(r)), REGS_RCX((r)->skas.regs))
#define UPT_RDX(r) __CHOOSE_MODE(SC_RDX(UPT_SC(r)), REGS_RDX((r)->skas.regs))
#define UPT_RSI(r) __CHOOSE_MODE(SC_RSI(UPT_SC(r)), REGS_RSI((r)->skas.regs))
#define UPT_RDI(r) __CHOOSE_MODE(SC_RDI(UPT_SC(r)), REGS_RDI((r)->skas.regs))
#define UPT_RBP(r) __CHOOSE_MODE(SC_RBP(UPT_SC(r)), REGS_RBP((r)->skas.regs))
#define UPT_RAX(r) __CHOOSE_MODE(SC_RAX(UPT_SC(r)), REGS_RAX((r)->skas.regs))
#define UPT_R8(r) __CHOOSE_MODE(SC_R8(UPT_SC(r)), REGS_R8((r)->skas.regs))
#define UPT_R9(r) __CHOOSE_MODE(SC_R9(UPT_SC(r)), REGS_R9((r)->skas.regs))
#define UPT_R10(r) __CHOOSE_MODE(SC_R10(UPT_SC(r)), REGS_R10((r)->skas.regs))
#define UPT_R11(r) __CHOOSE_MODE(SC_R11(UPT_SC(r)), REGS_R11((r)->skas.regs))
#define UPT_R12(r) __CHOOSE_MODE(SC_R12(UPT_SC(r)), REGS_R12((r)->skas.regs))
#define UPT_R13(r) __CHOOSE_MODE(SC_R13(UPT_SC(r)), REGS_R13((r)->skas.regs))
#define UPT_R14(r) __CHOOSE_MODE(SC_R14(UPT_SC(r)), REGS_R14((r)->skas.regs))
#define UPT_R15(r) __CHOOSE_MODE(SC_R15(UPT_SC(r)), REGS_R15((r)->skas.regs))
#define UPT_CS(r) __CHOOSE_MODE(SC_CS(UPT_SC(r)), REGS_CS((r)->skas.regs))
#define UPT_FS(r) __CHOOSE_MODE(SC_FS(UPT_SC(r)), REGS_FS((r)->skas.regs))
#define UPT_GS(r) __CHOOSE_MODE(SC_GS(UPT_SC(r)), REGS_GS((r)->skas.regs))
#define UPT_DS(r) __CHOOSE_MODE(SC_DS(UPT_SC(r)), REGS_DS((r)->skas.regs))
#define UPT_ES(r) __CHOOSE_MODE(SC_ES(UPT_SC(r)), REGS_ES((r)->skas.regs))
#define UPT_CS(r) __CHOOSE_MODE(SC_CS(UPT_SC(r)), REGS_CS((r)->skas.regs))
#define UPT_ORIG_RAX(r) \
__CHOOSE_MODE((r)->tt.orig_rax, REGS_ORIG_RAX((r)->skas.regs))
#define UPT_IP(r) __CHOOSE_MODE(SC_IP(UPT_SC(r)), REGS_IP((r)->skas.regs))
#define UPT_SP(r) __CHOOSE_MODE(SC_SP(UPT_SC(r)), REGS_SP((r)->skas.regs))
#define UPT_EFLAGS(r) \
__CHOOSE_MODE(SC_EFLAGS(UPT_SC(r)), REGS_EFLAGS((r)->skas.regs))
#define UPT_SC(r) ((r)->tt.sc)
#define UPT_SYSCALL_NR(r) __CHOOSE_MODE((r)->tt.syscall, (r)->skas.syscall)
#define UPT_SYSCALL_RET(r) UPT_RAX(r)
extern int user_context(unsigned long sp);
#define UPT_IS_USER(r) \
CHOOSE_MODE(user_context(UPT_SP(r)), (r)->skas.is_user)
#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
struct syscall_args {
unsigned long args[6];
};
#define SYSCALL_ARGS(r) ((struct syscall_args) \
{ .args = { UPT_SYSCALL_ARG1(r), \
UPT_SYSCALL_ARG2(r), \
UPT_SYSCALL_ARG3(r), \
UPT_SYSCALL_ARG4(r), \
UPT_SYSCALL_ARG5(r), \
UPT_SYSCALL_ARG6(r) } } )
#define UPT_REG(regs, reg) \
({ unsigned long val; \
switch(reg){ \
case R8: val = UPT_R8(regs); break; \
case R9: val = UPT_R9(regs); break; \
case R10: val = UPT_R10(regs); break; \
case R11: val = UPT_R11(regs); break; \
case R12: val = UPT_R12(regs); break; \
case R13: val = UPT_R13(regs); break; \
case R14: val = UPT_R14(regs); break; \
case R15: val = UPT_R15(regs); break; \
case RIP: val = UPT_IP(regs); break; \
case RSP: val = UPT_SP(regs); break; \
case RAX: val = UPT_RAX(regs); break; \
case RBX: val = UPT_RBX(regs); break; \
case RCX: val = UPT_RCX(regs); break; \
case RDX: val = UPT_RDX(regs); break; \
case RSI: val = UPT_RSI(regs); break; \
case RDI: val = UPT_RDI(regs); break; \
case RBP: val = UPT_RBP(regs); break; \
case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
case CS: val = UPT_CS(regs); break; \
case DS: val = UPT_DS(regs); break; \
case ES: val = UPT_ES(regs); break; \
case FS: val = UPT_FS(regs); break; \
case GS: val = UPT_GS(regs); break; \
case EFLAGS: val = UPT_EFLAGS(regs); break; \
default : \
panic("Bad register in UPT_REG : %d\n", reg); \
val = -1; \
} \
val; \
})
#define UPT_SET(regs, reg, val) \
({ unsigned long __upt_val = val; \
switch(reg){ \
case R8: UPT_R8(regs) = __upt_val; break; \
case R9: UPT_R9(regs) = __upt_val; break; \
case R10: UPT_R10(regs) = __upt_val; break; \
case R11: UPT_R11(regs) = __upt_val; break; \
case R12: UPT_R12(regs) = __upt_val; break; \
case R13: UPT_R13(regs) = __upt_val; break; \
case R14: UPT_R14(regs) = __upt_val; break; \
case R15: UPT_R15(regs) = __upt_val; break; \
case RIP: UPT_IP(regs) = __upt_val; break; \
case RSP: UPT_SP(regs) = __upt_val; break; \
case RAX: UPT_RAX(regs) = __upt_val; break; \
case RBX: UPT_RBX(regs) = __upt_val; break; \
case RCX: UPT_RCX(regs) = __upt_val; break; \
case RDX: UPT_RDX(regs) = __upt_val; break; \
case RSI: UPT_RSI(regs) = __upt_val; break; \
case RDI: UPT_RDI(regs) = __upt_val; break; \
case RBP: UPT_RBP(regs) = __upt_val; break; \
case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
case CS: UPT_CS(regs) = __upt_val; break; \
case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
default : \
panic("Bad register in UPT_SET : %d\n", reg); \
break; \
} \
__upt_val; \
})
#define UPT_SET_SYSCALL_RETURN(r, res) \
CHOOSE_MODE(SC_SET_SYSCALL_RETURN(UPT_SC(r), (res)), \
REGS_SET_SYSCALL_RETURN((r)->skas.regs, (res)))
#define UPT_RESTART_SYSCALL(r) \
CHOOSE_MODE(SC_RESTART_SYSCALL(UPT_SC(r)), \
REGS_RESTART_SYSCALL((r)->skas.regs))
#define UPT_SEGV_IS_FIXABLE(r) \
CHOOSE_MODE(SC_SEGV_IS_FIXABLE(UPT_SC(r)), \
REGS_SEGV_IS_FIXABLE(&r->skas))
#define UPT_FAULTINFO(r) \
CHOOSE_MODE((&(r)->tt.faultinfo), (&(r)->skas.faultinfo))
#endif