android_kernel_xiaomi_sm8350/arch/mips/alchemy/common/clocks.c
Ralf Baechle 1a73f0478a MIPS: Alchemy: Remove time_lock.
The sole user is au1xxx_calc_clock() which is only used in early bootup
where the is no paralellism thus no race condition to protect against.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
2010-02-27 12:53:36 +01:00

110 lines
3.4 KiB
C

/*
* BRIEF MODULE DESCRIPTION
* Simple Au1xx0 clocks routines.
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/time.h>
#include <asm/mach-au1x00/au1000.h>
/*
* I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
#define AU1000_SRC_CLK 12000000
static unsigned int au1x00_clock; /* Hz */
static unsigned long uart_baud_base;
/*
* Set the au1000_clock
*/
void set_au1x00_speed(unsigned int new_freq)
{
au1x00_clock = new_freq;
}
unsigned int get_au1x00_speed(void)
{
return au1x00_clock;
}
EXPORT_SYMBOL(get_au1x00_speed);
/*
* The UART baud base is not known at compile time ... if
* we want to be able to use the same code on different
* speed CPUs.
*/
unsigned long get_au1x00_uart_baud_base(void)
{
return uart_baud_base;
}
void set_au1x00_uart_baud_base(unsigned long new_baud_base)
{
uart_baud_base = new_baud_base;
}
/*
* We read the real processor speed from the PLL. This is important
* because it is more accurate than computing it from the 32 KHz
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
* properly. This function is futher convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
* write-only PLL register. -- Dan
*/
unsigned long au1xxx_calc_clock(void)
{
unsigned long cpu_speed;
/*
* On early Au1000, sys_cpupll was write-only. Since these
* silicon versions of Au1000 are not sold by AMD, we don't bend
* over backwards trying to determine the frequency.
*/
if (au1xxx_cpu_has_pll_wo())
#ifdef CONFIG_SOC_AU1000_FREQUENCY
cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
#else
cpu_speed = 396000000;
#endif
else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
/* On Alchemy CPU:counter ratio is 1:1 */
mips_hpt_frequency = cpu_speed;
/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
& 0x03) + 2) * 16));
set_au1x00_speed(cpu_speed);
return cpu_speed;
}