android_kernel_xiaomi_sm8350/Documentation/sysctl
Christoph Lameter 9614634fe6 [PATCH] ZVC/zone_reclaim: Leave 1% of unmapped pagecache pages for file I/O
It turns out that it is advantageous to leave a small portion of unmapped file
backed pages if all of a zone's pages (or almost all pages) are allocated and
so the page allocator has to go off-node.

This allows recently used file I/O buffers to stay on the node and
reduces the times that zone reclaim is invoked if file I/O occurs
when we run out of memory in a zone.

The problem is that zone reclaim runs too frequently when the page cache is
used for file I/O (read write and therefore unmapped pages!) alone and we have
almost all pages of the zone allocated.  Zone reclaim may remove 32 unmapped
pages.  File I/O will use these pages for the next read/write requests and the
unmapped pages increase.  After the zone has filled up again zone reclaim will
remove it again after only 32 pages.  This cycle is too inefficient and there
are potentially too many zone reclaim cycles.

With the 1% boundary we may still remove all unmapped pages for file I/O in
zone reclaim pass.  However.  it will take a large number of read and writes
to get back to 1% again where we trigger zone reclaim again.

The zone reclaim 2.6.16/17 does not show this behavior because we have a 30
second timeout.

[akpm@osdl.org: rename the /proc file and the variable]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:26:59 -07:00
..
abi.txt
fs.txt
kernel.txt
README
sunrpc.txt
vm.txt [PATCH] ZVC/zone_reclaim: Leave 1% of unmapped pagecache pages for file I/O 2006-07-03 15:26:59 -07:00

Documentation for /proc/sys/		kernel version 2.2.10
	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>

'Why', I hear you ask, 'would anyone even _want_ documentation
for them sysctl files? If anybody really needs it, it's all in
the source...'

Well, this documentation is written because some people either
don't know they need to tweak something, or because they don't
have the time or knowledge to read the source code.

Furthermore, the programmers who built sysctl have built it to
be actually used, not just for the fun of programming it :-)

==============================================================

Legal blurb:

As usual, there are two main things to consider:
1. you get what you pay for
2. it's free

The consequences are that I won't guarantee the correctness of
this document, and if you come to me complaining about how you
screwed up your system because of wrong documentation, I won't
feel sorry for you. I might even laugh at you...

But of course, if you _do_ manage to screw up your system using
only the sysctl options used in this file, I'd like to hear of
it. Not only to have a great laugh, but also to make sure that
you're the last RTFMing person to screw up.

In short, e-mail your suggestions, corrections and / or horror
stories to: <riel@nl.linux.org>

Rik van Riel.

==============================================================

Introduction:

Sysctl is a means of configuring certain aspects of the kernel
at run-time, and the /proc/sys/ directory is there so that you
don't even need special tools to do it!
In fact, there are only four things needed to use these config
facilities:
- a running Linux system
- root access
- common sense (this is especially hard to come by these days)
- knowledge of what all those values mean

As a quick 'ls /proc/sys' will show, the directory consists of
several (arch-dependent?) subdirs. Each subdir is mainly about
one part of the kernel, so you can do configuration on a piece
by piece basis, or just some 'thematic frobbing'.

The subdirs are about:
abi/		execution domains & personalities
debug/		<empty>
dev/		device specific information (eg dev/cdrom/info)
fs/		specific filesystems
		filehandle, inode, dentry and quota tuning
		binfmt_misc <Documentation/binfmt_misc.txt>
kernel/		global kernel info / tuning
		miscellaneous stuff
net/		networking stuff, for documentation look in:
		<Documentation/networking/>
proc/		<empty>
sunrpc/		SUN Remote Procedure Call (NFS)
vm/		memory management tuning
		buffer and cache management

These are the subdirs I have on my system. There might be more
or other subdirs in another setup. If you see another dir, I'd
really like to hear about it :-)