853ea132c7
The attached patch solves all my vdr tuning problems on a dib7000p nova-t stick as far as I could check within the last weekend. It disables streaming while tuning, like that the number of faulty TS packets is reduced. Signed-off-by: Soeren Moch <Soeren.Moch@stud.uni-hannover.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
1406 lines
40 KiB
C
1406 lines
40 KiB
C
/*
|
|
* Linux-DVB Driver for DiBcom's DiB7000M and
|
|
* first generation DiB7000P-demodulator-family.
|
|
*
|
|
* Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
|
|
#include "dib7000m.h"
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
|
|
|
|
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M: "); printk(args); printk("\n"); } } while (0)
|
|
|
|
struct dib7000m_state {
|
|
struct dvb_frontend demod;
|
|
struct dib7000m_config cfg;
|
|
|
|
u8 i2c_addr;
|
|
struct i2c_adapter *i2c_adap;
|
|
|
|
struct dibx000_i2c_master i2c_master;
|
|
|
|
/* offset is 1 in case of the 7000MC */
|
|
u8 reg_offs;
|
|
|
|
u16 wbd_ref;
|
|
|
|
u8 current_band;
|
|
fe_bandwidth_t current_bandwidth;
|
|
struct dibx000_agc_config *current_agc;
|
|
u32 timf;
|
|
u32 timf_default;
|
|
u32 internal_clk;
|
|
|
|
u8 div_force_off : 1;
|
|
u8 div_state : 1;
|
|
u16 div_sync_wait;
|
|
|
|
u16 revision;
|
|
|
|
u8 agc_state;
|
|
};
|
|
|
|
enum dib7000m_power_mode {
|
|
DIB7000M_POWER_ALL = 0,
|
|
|
|
DIB7000M_POWER_NO,
|
|
DIB7000M_POWER_INTERF_ANALOG_AGC,
|
|
DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD,
|
|
DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD,
|
|
DIB7000M_POWER_INTERFACE_ONLY,
|
|
};
|
|
|
|
static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
|
|
{
|
|
u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
|
|
u8 rb[2];
|
|
struct i2c_msg msg[2] = {
|
|
{ .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 },
|
|
{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
|
|
};
|
|
|
|
if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
|
|
dprintk("i2c read error on %d",reg);
|
|
|
|
return (rb[0] << 8) | rb[1];
|
|
}
|
|
|
|
static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
|
|
{
|
|
u8 b[4] = {
|
|
(reg >> 8) & 0xff, reg & 0xff,
|
|
(val >> 8) & 0xff, val & 0xff,
|
|
};
|
|
struct i2c_msg msg = {
|
|
.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
|
|
};
|
|
return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
|
|
}
|
|
static void dib7000m_write_tab(struct dib7000m_state *state, u16 *buf)
|
|
{
|
|
u16 l = 0, r, *n;
|
|
n = buf;
|
|
l = *n++;
|
|
while (l) {
|
|
r = *n++;
|
|
|
|
if (state->reg_offs && (r >= 112 && r <= 331)) // compensate for 7000MC
|
|
r++;
|
|
|
|
do {
|
|
dib7000m_write_word(state, r, *n++);
|
|
r++;
|
|
} while (--l);
|
|
l = *n++;
|
|
}
|
|
}
|
|
|
|
static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
|
|
{
|
|
int ret = 0;
|
|
u16 outreg, fifo_threshold, smo_mode,
|
|
sram = 0x0005; /* by default SRAM output is disabled */
|
|
|
|
outreg = 0;
|
|
fifo_threshold = 1792;
|
|
smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1);
|
|
|
|
dprintk( "setting output mode for demod %p to %d", &state->demod, mode);
|
|
|
|
switch (mode) {
|
|
case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock
|
|
outreg = (1 << 10); /* 0x0400 */
|
|
break;
|
|
case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock
|
|
outreg = (1 << 10) | (1 << 6); /* 0x0440 */
|
|
break;
|
|
case OUTMODE_MPEG2_SERIAL: // STBs with serial input
|
|
outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
|
|
break;
|
|
case OUTMODE_DIVERSITY:
|
|
if (state->cfg.hostbus_diversity)
|
|
outreg = (1 << 10) | (4 << 6); /* 0x0500 */
|
|
else
|
|
sram |= 0x0c00;
|
|
break;
|
|
case OUTMODE_MPEG2_FIFO: // e.g. USB feeding
|
|
smo_mode |= (3 << 1);
|
|
fifo_threshold = 512;
|
|
outreg = (1 << 10) | (5 << 6);
|
|
break;
|
|
case OUTMODE_HIGH_Z: // disable
|
|
outreg = 0;
|
|
break;
|
|
default:
|
|
dprintk( "Unhandled output_mode passed to be set for demod %p",&state->demod);
|
|
break;
|
|
}
|
|
|
|
if (state->cfg.output_mpeg2_in_188_bytes)
|
|
smo_mode |= (1 << 5) ;
|
|
|
|
ret |= dib7000m_write_word(state, 294 + state->reg_offs, smo_mode);
|
|
ret |= dib7000m_write_word(state, 295 + state->reg_offs, fifo_threshold); /* synchronous fread */
|
|
ret |= dib7000m_write_word(state, 1795, outreg);
|
|
ret |= dib7000m_write_word(state, 1805, sram);
|
|
|
|
if (state->revision == 0x4003) {
|
|
u16 clk_cfg1 = dib7000m_read_word(state, 909) & 0xfffd;
|
|
if (mode == OUTMODE_DIVERSITY)
|
|
clk_cfg1 |= (1 << 1); // P_O_CLK_en
|
|
dib7000m_write_word(state, 909, clk_cfg1);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
|
|
{
|
|
/* by default everything is going to be powered off */
|
|
u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906 = 0x3fff;
|
|
u8 offset = 0;
|
|
|
|
/* now, depending on the requested mode, we power on */
|
|
switch (mode) {
|
|
/* power up everything in the demod */
|
|
case DIB7000M_POWER_ALL:
|
|
reg_903 = 0x0000; reg_904 = 0x0000; reg_905 = 0x0000; reg_906 = 0x0000;
|
|
break;
|
|
|
|
/* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */
|
|
case DIB7000M_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */
|
|
reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2));
|
|
break;
|
|
|
|
case DIB7000M_POWER_INTERF_ANALOG_AGC:
|
|
reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10));
|
|
reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2));
|
|
reg_906 &= ~((1 << 0));
|
|
break;
|
|
|
|
case DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD:
|
|
reg_903 = 0x0000; reg_904 = 0x801f; reg_905 = 0x0000; reg_906 = 0x0000;
|
|
break;
|
|
|
|
case DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD:
|
|
reg_903 = 0x0000; reg_904 = 0x8000; reg_905 = 0x010b; reg_906 = 0x0000;
|
|
break;
|
|
case DIB7000M_POWER_NO:
|
|
break;
|
|
}
|
|
|
|
/* always power down unused parts */
|
|
if (!state->cfg.mobile_mode)
|
|
reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
|
|
|
|
/* P_sdio_select_clk = 0 on MC and after*/
|
|
if (state->revision != 0x4000)
|
|
reg_906 <<= 1;
|
|
|
|
if (state->revision == 0x4003)
|
|
offset = 1;
|
|
|
|
dib7000m_write_word(state, 903 + offset, reg_903);
|
|
dib7000m_write_word(state, 904 + offset, reg_904);
|
|
dib7000m_write_word(state, 905 + offset, reg_905);
|
|
dib7000m_write_word(state, 906 + offset, reg_906);
|
|
}
|
|
|
|
static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no)
|
|
{
|
|
int ret = 0;
|
|
u16 reg_913 = dib7000m_read_word(state, 913),
|
|
reg_914 = dib7000m_read_word(state, 914);
|
|
|
|
switch (no) {
|
|
case DIBX000_SLOW_ADC_ON:
|
|
reg_914 |= (1 << 1) | (1 << 0);
|
|
ret |= dib7000m_write_word(state, 914, reg_914);
|
|
reg_914 &= ~(1 << 1);
|
|
break;
|
|
|
|
case DIBX000_SLOW_ADC_OFF:
|
|
reg_914 |= (1 << 1) | (1 << 0);
|
|
break;
|
|
|
|
case DIBX000_ADC_ON:
|
|
if (state->revision == 0x4000) { // workaround for PA/MA
|
|
// power-up ADC
|
|
dib7000m_write_word(state, 913, 0);
|
|
dib7000m_write_word(state, 914, reg_914 & 0x3);
|
|
// power-down bandgag
|
|
dib7000m_write_word(state, 913, (1 << 15));
|
|
dib7000m_write_word(state, 914, reg_914 & 0x3);
|
|
}
|
|
|
|
reg_913 &= 0x0fff;
|
|
reg_914 &= 0x0003;
|
|
break;
|
|
|
|
case DIBX000_ADC_OFF: // leave the VBG voltage on
|
|
reg_913 |= (1 << 14) | (1 << 13) | (1 << 12);
|
|
reg_914 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
|
|
break;
|
|
|
|
case DIBX000_VBG_ENABLE:
|
|
reg_913 &= ~(1 << 15);
|
|
break;
|
|
|
|
case DIBX000_VBG_DISABLE:
|
|
reg_913 |= (1 << 15);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
// dprintk( "913: %x, 914: %x", reg_913, reg_914);
|
|
ret |= dib7000m_write_word(state, 913, reg_913);
|
|
ret |= dib7000m_write_word(state, 914, reg_914);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dib7000m_set_bandwidth(struct dib7000m_state *state, u32 bw)
|
|
{
|
|
u32 timf;
|
|
|
|
// store the current bandwidth for later use
|
|
state->current_bandwidth = bw;
|
|
|
|
if (state->timf == 0) {
|
|
dprintk( "using default timf");
|
|
timf = state->timf_default;
|
|
} else {
|
|
dprintk( "using updated timf");
|
|
timf = state->timf;
|
|
}
|
|
|
|
timf = timf * (bw / 50) / 160;
|
|
|
|
dib7000m_write_word(state, 23, (u16) ((timf >> 16) & 0xffff));
|
|
dib7000m_write_word(state, 24, (u16) ((timf ) & 0xffff));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_set_diversity_in(struct dvb_frontend *demod, int onoff)
|
|
{
|
|
struct dib7000m_state *state = demod->demodulator_priv;
|
|
|
|
if (state->div_force_off) {
|
|
dprintk( "diversity combination deactivated - forced by COFDM parameters");
|
|
onoff = 0;
|
|
}
|
|
state->div_state = (u8)onoff;
|
|
|
|
if (onoff) {
|
|
dib7000m_write_word(state, 263 + state->reg_offs, 6);
|
|
dib7000m_write_word(state, 264 + state->reg_offs, 6);
|
|
dib7000m_write_word(state, 266 + state->reg_offs, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));
|
|
} else {
|
|
dib7000m_write_word(state, 263 + state->reg_offs, 1);
|
|
dib7000m_write_word(state, 264 + state->reg_offs, 0);
|
|
dib7000m_write_word(state, 266 + state->reg_offs, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_sad_calib(struct dib7000m_state *state)
|
|
{
|
|
|
|
/* internal */
|
|
// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
|
|
dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
|
|
dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
|
|
|
|
/* do the calibration */
|
|
dib7000m_write_word(state, 929, (1 << 0));
|
|
dib7000m_write_word(state, 929, (0 << 0));
|
|
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw)
|
|
{
|
|
dib7000m_write_word(state, 18, (u16) (((bw->internal*1000) >> 16) & 0xffff));
|
|
dib7000m_write_word(state, 19, (u16) ( (bw->internal*1000) & 0xffff));
|
|
dib7000m_write_word(state, 21, (u16) ( (bw->ifreq >> 16) & 0xffff));
|
|
dib7000m_write_word(state, 22, (u16) ( bw->ifreq & 0xffff));
|
|
|
|
dib7000m_write_word(state, 928, bw->sad_cfg);
|
|
}
|
|
|
|
static void dib7000m_reset_pll(struct dib7000m_state *state)
|
|
{
|
|
const struct dibx000_bandwidth_config *bw = state->cfg.bw;
|
|
u16 reg_907,reg_910;
|
|
|
|
/* default */
|
|
reg_907 = (bw->pll_bypass << 15) | (bw->modulo << 7) |
|
|
(bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) |
|
|
(bw->enable_refdiv << 1) | (0 << 0);
|
|
reg_910 = (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset;
|
|
|
|
// for this oscillator frequency should be 30 MHz for the Master (default values in the board_parameters give that value)
|
|
// this is only working only for 30 MHz crystals
|
|
if (!state->cfg.quartz_direct) {
|
|
reg_910 |= (1 << 5); // forcing the predivider to 1
|
|
|
|
// if the previous front-end is baseband, its output frequency is 15 MHz (prev freq divided by 2)
|
|
if(state->cfg.input_clk_is_div_2)
|
|
reg_907 |= (16 << 9);
|
|
else // otherwise the previous front-end puts out its input (default 30MHz) - no extra division necessary
|
|
reg_907 |= (8 << 9);
|
|
} else {
|
|
reg_907 |= (bw->pll_ratio & 0x3f) << 9;
|
|
reg_910 |= (bw->pll_prediv << 5);
|
|
}
|
|
|
|
dib7000m_write_word(state, 910, reg_910); // pll cfg
|
|
dib7000m_write_word(state, 907, reg_907); // clk cfg0
|
|
dib7000m_write_word(state, 908, 0x0006); // clk_cfg1
|
|
|
|
dib7000m_reset_pll_common(state, bw);
|
|
}
|
|
|
|
static void dib7000mc_reset_pll(struct dib7000m_state *state)
|
|
{
|
|
const struct dibx000_bandwidth_config *bw = state->cfg.bw;
|
|
u16 clk_cfg1;
|
|
|
|
// clk_cfg0
|
|
dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0));
|
|
|
|
// clk_cfg1
|
|
//dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) |
|
|
clk_cfg1 = (0 << 14) | (3 << 12) |(0 << 11) |
|
|
(bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) |
|
|
(1 << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0);
|
|
dib7000m_write_word(state, 908, clk_cfg1);
|
|
clk_cfg1 = (clk_cfg1 & 0xfff7) | (bw->pll_bypass << 3);
|
|
dib7000m_write_word(state, 908, clk_cfg1);
|
|
|
|
// smpl_cfg
|
|
dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7));
|
|
|
|
dib7000m_reset_pll_common(state, bw);
|
|
}
|
|
|
|
static int dib7000m_reset_gpio(struct dib7000m_state *st)
|
|
{
|
|
/* reset the GPIOs */
|
|
dib7000m_write_word(st, 773, st->cfg.gpio_dir);
|
|
dib7000m_write_word(st, 774, st->cfg.gpio_val);
|
|
|
|
/* TODO 782 is P_gpio_od */
|
|
|
|
dib7000m_write_word(st, 775, st->cfg.gpio_pwm_pos);
|
|
|
|
dib7000m_write_word(st, 780, st->cfg.pwm_freq_div);
|
|
return 0;
|
|
}
|
|
|
|
static u16 dib7000m_defaults_common[] =
|
|
|
|
{
|
|
// auto search configuration
|
|
3, 2,
|
|
0x0004,
|
|
0x1000,
|
|
0x0814,
|
|
|
|
12, 6,
|
|
0x001b,
|
|
0x7740,
|
|
0x005b,
|
|
0x8d80,
|
|
0x01c9,
|
|
0xc380,
|
|
0x0000,
|
|
0x0080,
|
|
0x0000,
|
|
0x0090,
|
|
0x0001,
|
|
0xd4c0,
|
|
|
|
1, 26,
|
|
0x6680, // P_corm_thres Lock algorithms configuration
|
|
|
|
1, 170,
|
|
0x0410, // P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
|
|
|
|
8, 173,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
|
|
1, 182,
|
|
8192, // P_fft_nb_to_cut
|
|
|
|
2, 195,
|
|
0x0ccd, // P_pha3_thres
|
|
0, // P_cti_use_cpe, P_cti_use_prog
|
|
|
|
1, 205,
|
|
0x200f, // P_cspu_regul, P_cspu_win_cut
|
|
|
|
5, 214,
|
|
0x023d, // P_adp_regul_cnt
|
|
0x00a4, // P_adp_noise_cnt
|
|
0x00a4, // P_adp_regul_ext
|
|
0x7ff0, // P_adp_noise_ext
|
|
0x3ccc, // P_adp_fil
|
|
|
|
1, 226,
|
|
0, // P_2d_byp_ti_num
|
|
|
|
1, 255,
|
|
0x800, // P_equal_thres_wgn
|
|
|
|
1, 263,
|
|
0x0001,
|
|
|
|
1, 281,
|
|
0x0010, // P_fec_*
|
|
|
|
1, 294,
|
|
0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
|
|
|
|
0
|
|
};
|
|
|
|
static u16 dib7000m_defaults[] =
|
|
|
|
{
|
|
/* set ADC level to -16 */
|
|
11, 76,
|
|
(1 << 13) - 825 - 117,
|
|
(1 << 13) - 837 - 117,
|
|
(1 << 13) - 811 - 117,
|
|
(1 << 13) - 766 - 117,
|
|
(1 << 13) - 737 - 117,
|
|
(1 << 13) - 693 - 117,
|
|
(1 << 13) - 648 - 117,
|
|
(1 << 13) - 619 - 117,
|
|
(1 << 13) - 575 - 117,
|
|
(1 << 13) - 531 - 117,
|
|
(1 << 13) - 501 - 117,
|
|
|
|
// Tuner IO bank: max drive (14mA)
|
|
1, 912,
|
|
0x2c8a,
|
|
|
|
1, 1817,
|
|
1,
|
|
|
|
0,
|
|
};
|
|
|
|
static int dib7000m_demod_reset(struct dib7000m_state *state)
|
|
{
|
|
dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
|
|
|
|
/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
|
|
dib7000m_set_adc_state(state, DIBX000_VBG_ENABLE);
|
|
|
|
/* restart all parts */
|
|
dib7000m_write_word(state, 898, 0xffff);
|
|
dib7000m_write_word(state, 899, 0xffff);
|
|
dib7000m_write_word(state, 900, 0xff0f);
|
|
dib7000m_write_word(state, 901, 0xfffc);
|
|
|
|
dib7000m_write_word(state, 898, 0);
|
|
dib7000m_write_word(state, 899, 0);
|
|
dib7000m_write_word(state, 900, 0);
|
|
dib7000m_write_word(state, 901, 0);
|
|
|
|
if (state->revision == 0x4000)
|
|
dib7000m_reset_pll(state);
|
|
else
|
|
dib7000mc_reset_pll(state);
|
|
|
|
if (dib7000m_reset_gpio(state) != 0)
|
|
dprintk( "GPIO reset was not successful.");
|
|
|
|
if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
|
|
dprintk( "OUTPUT_MODE could not be reset.");
|
|
|
|
/* unforce divstr regardless whether i2c enumeration was done or not */
|
|
dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) );
|
|
|
|
dib7000m_set_bandwidth(state, 8000);
|
|
|
|
dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON);
|
|
dib7000m_sad_calib(state);
|
|
dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
|
|
|
|
if (state->cfg.dvbt_mode)
|
|
dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
|
|
|
|
if (state->cfg.mobile_mode)
|
|
dib7000m_write_word(state, 261 + state->reg_offs, 2);
|
|
else
|
|
dib7000m_write_word(state, 224 + state->reg_offs, 1);
|
|
|
|
// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
|
|
if(state->cfg.tuner_is_baseband)
|
|
dib7000m_write_word(state, 36, 0x0755);
|
|
else
|
|
dib7000m_write_word(state, 36, 0x1f55);
|
|
|
|
// P_divclksel=3 P_divbitsel=1
|
|
if (state->revision == 0x4000)
|
|
dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
|
|
else
|
|
dib7000m_write_word(state, 909, (3 << 4) | 1);
|
|
|
|
dib7000m_write_tab(state, dib7000m_defaults_common);
|
|
dib7000m_write_tab(state, dib7000m_defaults);
|
|
|
|
dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY);
|
|
|
|
state->internal_clk = state->cfg.bw->internal;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dib7000m_restart_agc(struct dib7000m_state *state)
|
|
{
|
|
// P_restart_iqc & P_restart_agc
|
|
dib7000m_write_word(state, 898, 0x0c00);
|
|
dib7000m_write_word(state, 898, 0x0000);
|
|
}
|
|
|
|
static int dib7000m_agc_soft_split(struct dib7000m_state *state)
|
|
{
|
|
u16 agc,split_offset;
|
|
|
|
if(!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
|
|
return 0;
|
|
|
|
// n_agc_global
|
|
agc = dib7000m_read_word(state, 390);
|
|
|
|
if (agc > state->current_agc->split.min_thres)
|
|
split_offset = state->current_agc->split.min;
|
|
else if (agc < state->current_agc->split.max_thres)
|
|
split_offset = state->current_agc->split.max;
|
|
else
|
|
split_offset = state->current_agc->split.max *
|
|
(agc - state->current_agc->split.min_thres) /
|
|
(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
|
|
|
|
dprintk( "AGC split_offset: %d",split_offset);
|
|
|
|
// P_agc_force_split and P_agc_split_offset
|
|
return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset);
|
|
}
|
|
|
|
static int dib7000m_update_lna(struct dib7000m_state *state)
|
|
{
|
|
u16 dyn_gain;
|
|
|
|
if (state->cfg.update_lna) {
|
|
// read dyn_gain here (because it is demod-dependent and not fe)
|
|
dyn_gain = dib7000m_read_word(state, 390);
|
|
|
|
if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
|
|
dib7000m_restart_agc(state);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
|
|
{
|
|
struct dibx000_agc_config *agc = NULL;
|
|
int i;
|
|
if (state->current_band == band && state->current_agc != NULL)
|
|
return 0;
|
|
state->current_band = band;
|
|
|
|
for (i = 0; i < state->cfg.agc_config_count; i++)
|
|
if (state->cfg.agc[i].band_caps & band) {
|
|
agc = &state->cfg.agc[i];
|
|
break;
|
|
}
|
|
|
|
if (agc == NULL) {
|
|
dprintk( "no valid AGC configuration found for band 0x%02x",band);
|
|
return -EINVAL;
|
|
}
|
|
|
|
state->current_agc = agc;
|
|
|
|
/* AGC */
|
|
dib7000m_write_word(state, 72 , agc->setup);
|
|
dib7000m_write_word(state, 73 , agc->inv_gain);
|
|
dib7000m_write_word(state, 74 , agc->time_stabiliz);
|
|
dib7000m_write_word(state, 97 , (agc->alpha_level << 12) | agc->thlock);
|
|
|
|
// Demod AGC loop configuration
|
|
dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp);
|
|
dib7000m_write_word(state, 99, (agc->beta_mant << 6) | agc->beta_exp);
|
|
|
|
dprintk( "WBD: ref: %d, sel: %d, active: %d, alpha: %d",
|
|
state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
|
|
|
|
/* AGC continued */
|
|
if (state->wbd_ref != 0)
|
|
dib7000m_write_word(state, 102, state->wbd_ref);
|
|
else // use default
|
|
dib7000m_write_word(state, 102, agc->wbd_ref);
|
|
|
|
dib7000m_write_word(state, 103, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
|
|
dib7000m_write_word(state, 104, agc->agc1_max);
|
|
dib7000m_write_word(state, 105, agc->agc1_min);
|
|
dib7000m_write_word(state, 106, agc->agc2_max);
|
|
dib7000m_write_word(state, 107, agc->agc2_min);
|
|
dib7000m_write_word(state, 108, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
|
|
dib7000m_write_word(state, 109, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
|
|
dib7000m_write_word(state, 110, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
|
|
dib7000m_write_word(state, 111, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
|
|
|
|
if (state->revision > 0x4000) { // settings for the MC
|
|
dib7000m_write_word(state, 71, agc->agc1_pt3);
|
|
// dprintk( "929: %x %d %d",
|
|
// (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel);
|
|
dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
|
|
} else {
|
|
// wrong default values
|
|
u16 b[9] = { 676, 696, 717, 737, 758, 778, 799, 819, 840 };
|
|
for (i = 0; i < 9; i++)
|
|
dib7000m_write_word(state, 88 + i, b[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void dib7000m_update_timf(struct dib7000m_state *state)
|
|
{
|
|
u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437);
|
|
state->timf = timf * 160 / (state->current_bandwidth / 50);
|
|
dib7000m_write_word(state, 23, (u16) (timf >> 16));
|
|
dib7000m_write_word(state, 24, (u16) (timf & 0xffff));
|
|
dprintk( "updated timf_frequency: %d (default: %d)",state->timf, state->timf_default);
|
|
}
|
|
|
|
static int dib7000m_agc_startup(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
|
|
{
|
|
struct dib7000m_state *state = demod->demodulator_priv;
|
|
u16 cfg_72 = dib7000m_read_word(state, 72);
|
|
int ret = -1;
|
|
u8 *agc_state = &state->agc_state;
|
|
u8 agc_split;
|
|
|
|
switch (state->agc_state) {
|
|
case 0:
|
|
// set power-up level: interf+analog+AGC
|
|
dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
|
|
dib7000m_set_adc_state(state, DIBX000_ADC_ON);
|
|
|
|
if (dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency/1000)) != 0)
|
|
return -1;
|
|
|
|
ret = 7; /* ADC power up */
|
|
(*agc_state)++;
|
|
break;
|
|
|
|
case 1:
|
|
/* AGC initialization */
|
|
if (state->cfg.agc_control)
|
|
state->cfg.agc_control(&state->demod, 1);
|
|
|
|
dib7000m_write_word(state, 75, 32768);
|
|
if (!state->current_agc->perform_agc_softsplit) {
|
|
/* we are using the wbd - so slow AGC startup */
|
|
dib7000m_write_word(state, 103, 1 << 8); /* force 0 split on WBD and restart AGC */
|
|
(*agc_state)++;
|
|
ret = 5;
|
|
} else {
|
|
/* default AGC startup */
|
|
(*agc_state) = 4;
|
|
/* wait AGC rough lock time */
|
|
ret = 7;
|
|
}
|
|
|
|
dib7000m_restart_agc(state);
|
|
break;
|
|
|
|
case 2: /* fast split search path after 5sec */
|
|
dib7000m_write_word(state, 72, cfg_72 | (1 << 4)); /* freeze AGC loop */
|
|
dib7000m_write_word(state, 103, 2 << 9); /* fast split search 0.25kHz */
|
|
(*agc_state)++;
|
|
ret = 14;
|
|
break;
|
|
|
|
case 3: /* split search ended */
|
|
agc_split = (u8)dib7000m_read_word(state, 392); /* store the split value for the next time */
|
|
dib7000m_write_word(state, 75, dib7000m_read_word(state, 390)); /* set AGC gain start value */
|
|
|
|
dib7000m_write_word(state, 72, cfg_72 & ~(1 << 4)); /* std AGC loop */
|
|
dib7000m_write_word(state, 103, (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */
|
|
|
|
dib7000m_restart_agc(state);
|
|
|
|
dprintk( "SPLIT %p: %hd", demod, agc_split);
|
|
|
|
(*agc_state)++;
|
|
ret = 5;
|
|
break;
|
|
|
|
case 4: /* LNA startup */
|
|
/* wait AGC accurate lock time */
|
|
ret = 7;
|
|
|
|
if (dib7000m_update_lna(state))
|
|
// wait only AGC rough lock time
|
|
ret = 5;
|
|
else
|
|
(*agc_state)++;
|
|
break;
|
|
|
|
case 5:
|
|
dib7000m_agc_soft_split(state);
|
|
|
|
if (state->cfg.agc_control)
|
|
state->cfg.agc_control(&state->demod, 0);
|
|
|
|
(*agc_state)++;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void dib7000m_set_channel(struct dib7000m_state *state, struct dvb_frontend_parameters *ch, u8 seq)
|
|
{
|
|
u16 value, est[4];
|
|
|
|
dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
|
|
|
|
/* nfft, guard, qam, alpha */
|
|
value = 0;
|
|
switch (ch->u.ofdm.transmission_mode) {
|
|
case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
|
|
case /* 4K MODE */ 255: value |= (2 << 7); break;
|
|
default:
|
|
case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
|
|
}
|
|
switch (ch->u.ofdm.guard_interval) {
|
|
case GUARD_INTERVAL_1_32: value |= (0 << 5); break;
|
|
case GUARD_INTERVAL_1_16: value |= (1 << 5); break;
|
|
case GUARD_INTERVAL_1_4: value |= (3 << 5); break;
|
|
default:
|
|
case GUARD_INTERVAL_1_8: value |= (2 << 5); break;
|
|
}
|
|
switch (ch->u.ofdm.constellation) {
|
|
case QPSK: value |= (0 << 3); break;
|
|
case QAM_16: value |= (1 << 3); break;
|
|
default:
|
|
case QAM_64: value |= (2 << 3); break;
|
|
}
|
|
switch (HIERARCHY_1) {
|
|
case HIERARCHY_2: value |= 2; break;
|
|
case HIERARCHY_4: value |= 4; break;
|
|
default:
|
|
case HIERARCHY_1: value |= 1; break;
|
|
}
|
|
dib7000m_write_word(state, 0, value);
|
|
dib7000m_write_word(state, 5, (seq << 4));
|
|
|
|
/* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */
|
|
value = 0;
|
|
if (1 != 0)
|
|
value |= (1 << 6);
|
|
if (ch->u.ofdm.hierarchy_information == 1)
|
|
value |= (1 << 4);
|
|
if (1 == 1)
|
|
value |= 1;
|
|
switch ((ch->u.ofdm.hierarchy_information == 0 || 1 == 1) ? ch->u.ofdm.code_rate_HP : ch->u.ofdm.code_rate_LP) {
|
|
case FEC_2_3: value |= (2 << 1); break;
|
|
case FEC_3_4: value |= (3 << 1); break;
|
|
case FEC_5_6: value |= (5 << 1); break;
|
|
case FEC_7_8: value |= (7 << 1); break;
|
|
default:
|
|
case FEC_1_2: value |= (1 << 1); break;
|
|
}
|
|
dib7000m_write_word(state, 267 + state->reg_offs, value);
|
|
|
|
/* offset loop parameters */
|
|
|
|
/* P_timf_alpha = 6, P_corm_alpha=6, P_corm_thres=0x80 */
|
|
dib7000m_write_word(state, 26, (6 << 12) | (6 << 8) | 0x80);
|
|
|
|
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=1, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
|
|
dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (1 << 9) | (3 << 5) | (1 << 4) | (0x3));
|
|
|
|
/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max=3 */
|
|
dib7000m_write_word(state, 32, (0 << 4) | 0x3);
|
|
|
|
/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step=5 */
|
|
dib7000m_write_word(state, 33, (0 << 4) | 0x5);
|
|
|
|
/* P_dvsy_sync_wait */
|
|
switch (ch->u.ofdm.transmission_mode) {
|
|
case TRANSMISSION_MODE_8K: value = 256; break;
|
|
case /* 4K MODE */ 255: value = 128; break;
|
|
case TRANSMISSION_MODE_2K:
|
|
default: value = 64; break;
|
|
}
|
|
switch (ch->u.ofdm.guard_interval) {
|
|
case GUARD_INTERVAL_1_16: value *= 2; break;
|
|
case GUARD_INTERVAL_1_8: value *= 4; break;
|
|
case GUARD_INTERVAL_1_4: value *= 8; break;
|
|
default:
|
|
case GUARD_INTERVAL_1_32: value *= 1; break;
|
|
}
|
|
state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
|
|
|
|
/* deactive the possibility of diversity reception if extended interleave - not for 7000MC */
|
|
/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
|
|
if (1 == 1 || state->revision > 0x4000)
|
|
state->div_force_off = 0;
|
|
else
|
|
state->div_force_off = 1;
|
|
dib7000m_set_diversity_in(&state->demod, state->div_state);
|
|
|
|
/* channel estimation fine configuration */
|
|
switch (ch->u.ofdm.constellation) {
|
|
case QAM_64:
|
|
est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
|
|
est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
|
|
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
|
|
est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
|
|
break;
|
|
case QAM_16:
|
|
est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
|
|
est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
|
|
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
|
|
est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */
|
|
break;
|
|
default:
|
|
est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */
|
|
est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */
|
|
est[2] = 0x0333; /* P_adp_regul_ext 0.1 */
|
|
est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */
|
|
break;
|
|
}
|
|
for (value = 0; value < 4; value++)
|
|
dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]);
|
|
|
|
// set power-up level: autosearch
|
|
dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD);
|
|
}
|
|
|
|
static int dib7000m_autosearch_start(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
|
|
{
|
|
struct dib7000m_state *state = demod->demodulator_priv;
|
|
struct dvb_frontend_parameters schan;
|
|
int ret = 0;
|
|
u32 value, factor;
|
|
|
|
schan = *ch;
|
|
|
|
schan.u.ofdm.constellation = QAM_64;
|
|
schan.u.ofdm.guard_interval = GUARD_INTERVAL_1_32;
|
|
schan.u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
|
|
schan.u.ofdm.code_rate_HP = FEC_2_3;
|
|
schan.u.ofdm.code_rate_LP = FEC_3_4;
|
|
schan.u.ofdm.hierarchy_information = 0;
|
|
|
|
dib7000m_set_channel(state, &schan, 7);
|
|
|
|
factor = BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth);
|
|
if (factor >= 5000)
|
|
factor = 1;
|
|
else
|
|
factor = 6;
|
|
|
|
// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
|
|
value = 30 * state->internal_clk * factor;
|
|
ret |= dib7000m_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
|
|
ret |= dib7000m_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time
|
|
value = 100 * state->internal_clk * factor;
|
|
ret |= dib7000m_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
|
|
ret |= dib7000m_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time
|
|
value = 500 * state->internal_clk * factor;
|
|
ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
|
|
ret |= dib7000m_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time
|
|
|
|
// start search
|
|
value = dib7000m_read_word(state, 0);
|
|
ret |= dib7000m_write_word(state, 0, (u16) (value | (1 << 9)));
|
|
|
|
/* clear n_irq_pending */
|
|
if (state->revision == 0x4000)
|
|
dib7000m_write_word(state, 1793, 0);
|
|
else
|
|
dib7000m_read_word(state, 537);
|
|
|
|
ret |= dib7000m_write_word(state, 0, (u16) value);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg)
|
|
{
|
|
u16 irq_pending = dib7000m_read_word(state, reg);
|
|
|
|
if (irq_pending & 0x1) { // failed
|
|
dprintk( "autosearch failed");
|
|
return 1;
|
|
}
|
|
|
|
if (irq_pending & 0x2) { // succeeded
|
|
dprintk( "autosearch succeeded");
|
|
return 2;
|
|
}
|
|
return 0; // still pending
|
|
}
|
|
|
|
static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod)
|
|
{
|
|
struct dib7000m_state *state = demod->demodulator_priv;
|
|
if (state->revision == 0x4000)
|
|
return dib7000m_autosearch_irq(state, 1793);
|
|
else
|
|
return dib7000m_autosearch_irq(state, 537);
|
|
}
|
|
|
|
static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
|
|
{
|
|
struct dib7000m_state *state = demod->demodulator_priv;
|
|
int ret = 0;
|
|
u16 value;
|
|
|
|
// we are already tuned - just resuming from suspend
|
|
if (ch != NULL)
|
|
dib7000m_set_channel(state, ch, 0);
|
|
else
|
|
return -EINVAL;
|
|
|
|
// restart demod
|
|
ret |= dib7000m_write_word(state, 898, 0x4000);
|
|
ret |= dib7000m_write_word(state, 898, 0x0000);
|
|
msleep(45);
|
|
|
|
dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
|
|
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
|
|
ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
|
|
|
|
// never achieved a lock before - wait for timfreq to update
|
|
if (state->timf == 0)
|
|
msleep(200);
|
|
|
|
//dump_reg(state);
|
|
/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
|
|
value = (6 << 8) | 0x80;
|
|
switch (ch->u.ofdm.transmission_mode) {
|
|
case TRANSMISSION_MODE_2K: value |= (7 << 12); break;
|
|
case /* 4K MODE */ 255: value |= (8 << 12); break;
|
|
default:
|
|
case TRANSMISSION_MODE_8K: value |= (9 << 12); break;
|
|
}
|
|
ret |= dib7000m_write_word(state, 26, value);
|
|
|
|
/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
|
|
value = (0 << 4);
|
|
switch (ch->u.ofdm.transmission_mode) {
|
|
case TRANSMISSION_MODE_2K: value |= 0x6; break;
|
|
case /* 4K MODE */ 255: value |= 0x7; break;
|
|
default:
|
|
case TRANSMISSION_MODE_8K: value |= 0x8; break;
|
|
}
|
|
ret |= dib7000m_write_word(state, 32, value);
|
|
|
|
/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
|
|
value = (0 << 4);
|
|
switch (ch->u.ofdm.transmission_mode) {
|
|
case TRANSMISSION_MODE_2K: value |= 0x6; break;
|
|
case /* 4K MODE */ 255: value |= 0x7; break;
|
|
default:
|
|
case TRANSMISSION_MODE_8K: value |= 0x8; break;
|
|
}
|
|
ret |= dib7000m_write_word(state, 33, value);
|
|
|
|
// we achieved a lock - it's time to update the timf freq
|
|
if ((dib7000m_read_word(state, 535) >> 6) & 0x1)
|
|
dib7000m_update_timf(state);
|
|
|
|
dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
|
|
return ret;
|
|
}
|
|
|
|
static int dib7000m_wakeup(struct dvb_frontend *demod)
|
|
{
|
|
struct dib7000m_state *state = demod->demodulator_priv;
|
|
|
|
dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
|
|
|
|
if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
|
|
dprintk( "could not start Slow ADC");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_sleep(struct dvb_frontend *demod)
|
|
{
|
|
struct dib7000m_state *st = demod->demodulator_priv;
|
|
dib7000m_set_output_mode(st, OUTMODE_HIGH_Z);
|
|
dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY);
|
|
return dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
|
|
dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
|
|
}
|
|
|
|
static int dib7000m_identify(struct dib7000m_state *state)
|
|
{
|
|
u16 value;
|
|
|
|
if ((value = dib7000m_read_word(state, 896)) != 0x01b3) {
|
|
dprintk( "wrong Vendor ID (0x%x)",value);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
state->revision = dib7000m_read_word(state, 897);
|
|
if (state->revision != 0x4000 &&
|
|
state->revision != 0x4001 &&
|
|
state->revision != 0x4002 &&
|
|
state->revision != 0x4003) {
|
|
dprintk( "wrong Device ID (0x%x)",value);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
/* protect this driver to be used with 7000PC */
|
|
if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) {
|
|
dprintk( "this driver does not work with DiB7000PC");
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
switch (state->revision) {
|
|
case 0x4000: dprintk( "found DiB7000MA/PA/MB/PB"); break;
|
|
case 0x4001: state->reg_offs = 1; dprintk( "found DiB7000HC"); break;
|
|
case 0x4002: state->reg_offs = 1; dprintk( "found DiB7000MC"); break;
|
|
case 0x4003: state->reg_offs = 1; dprintk( "found DiB9000"); break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int dib7000m_get_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dib7000m_state *state = fe->demodulator_priv;
|
|
u16 tps = dib7000m_read_word(state,480);
|
|
|
|
fep->inversion = INVERSION_AUTO;
|
|
|
|
fep->u.ofdm.bandwidth = state->current_bandwidth;
|
|
|
|
switch ((tps >> 8) & 0x3) {
|
|
case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
|
|
case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
|
|
/* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
|
|
}
|
|
|
|
switch (tps & 0x3) {
|
|
case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
|
|
case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
|
|
case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
|
|
case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
|
|
}
|
|
|
|
switch ((tps >> 14) & 0x3) {
|
|
case 0: fep->u.ofdm.constellation = QPSK; break;
|
|
case 1: fep->u.ofdm.constellation = QAM_16; break;
|
|
case 2:
|
|
default: fep->u.ofdm.constellation = QAM_64; break;
|
|
}
|
|
|
|
/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
|
|
/* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
|
|
|
|
fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
|
|
switch ((tps >> 5) & 0x7) {
|
|
case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
|
|
case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
|
|
case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
|
|
case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
|
|
case 7:
|
|
default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
|
|
|
|
}
|
|
|
|
switch ((tps >> 2) & 0x7) {
|
|
case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
|
|
case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
|
|
case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
|
|
case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
|
|
case 7:
|
|
default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
|
|
}
|
|
|
|
/* native interleaver: (dib7000m_read_word(state, 481) >> 5) & 0x1 */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_set_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dib7000m_state *state = fe->demodulator_priv;
|
|
int time, ret;
|
|
|
|
dib7000m_set_output_mode(state, OUTMODE_HIGH_Z);
|
|
|
|
state->current_bandwidth = fep->u.ofdm.bandwidth;
|
|
dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
|
|
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe, fep);
|
|
|
|
/* start up the AGC */
|
|
state->agc_state = 0;
|
|
do {
|
|
time = dib7000m_agc_startup(fe, fep);
|
|
if (time != -1)
|
|
msleep(time);
|
|
} while (time != -1);
|
|
|
|
if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
|
|
fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ||
|
|
fep->u.ofdm.constellation == QAM_AUTO ||
|
|
fep->u.ofdm.code_rate_HP == FEC_AUTO) {
|
|
int i = 800, found;
|
|
|
|
dib7000m_autosearch_start(fe, fep);
|
|
do {
|
|
msleep(1);
|
|
found = dib7000m_autosearch_is_irq(fe);
|
|
} while (found == 0 && i--);
|
|
|
|
dprintk("autosearch returns: %d",found);
|
|
if (found == 0 || found == 1)
|
|
return 0; // no channel found
|
|
|
|
dib7000m_get_frontend(fe, fep);
|
|
}
|
|
|
|
ret = dib7000m_tune(fe, fep);
|
|
|
|
/* make this a config parameter */
|
|
dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
|
|
return ret;
|
|
}
|
|
|
|
static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
|
|
{
|
|
struct dib7000m_state *state = fe->demodulator_priv;
|
|
u16 lock = dib7000m_read_word(state, 535);
|
|
|
|
*stat = 0;
|
|
|
|
if (lock & 0x8000)
|
|
*stat |= FE_HAS_SIGNAL;
|
|
if (lock & 0x3000)
|
|
*stat |= FE_HAS_CARRIER;
|
|
if (lock & 0x0100)
|
|
*stat |= FE_HAS_VITERBI;
|
|
if (lock & 0x0010)
|
|
*stat |= FE_HAS_SYNC;
|
|
if (lock & 0x0008)
|
|
*stat |= FE_HAS_LOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct dib7000m_state *state = fe->demodulator_priv;
|
|
*ber = (dib7000m_read_word(state, 526) << 16) | dib7000m_read_word(state, 527);
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
|
|
{
|
|
struct dib7000m_state *state = fe->demodulator_priv;
|
|
*unc = dib7000m_read_word(state, 534);
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct dib7000m_state *state = fe->demodulator_priv;
|
|
u16 val = dib7000m_read_word(state, 390);
|
|
*strength = 65535 - val;
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_read_snr(struct dvb_frontend* fe, u16 *snr)
|
|
{
|
|
*snr = 0x0000;
|
|
return 0;
|
|
}
|
|
|
|
static int dib7000m_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
|
|
{
|
|
tune->min_delay_ms = 1000;
|
|
return 0;
|
|
}
|
|
|
|
static void dib7000m_release(struct dvb_frontend *demod)
|
|
{
|
|
struct dib7000m_state *st = demod->demodulator_priv;
|
|
dibx000_exit_i2c_master(&st->i2c_master);
|
|
kfree(st);
|
|
}
|
|
|
|
struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
|
|
{
|
|
struct dib7000m_state *st = demod->demodulator_priv;
|
|
return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
|
|
}
|
|
EXPORT_SYMBOL(dib7000m_get_i2c_master);
|
|
|
|
int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[])
|
|
{
|
|
struct dib7000m_state st = { .i2c_adap = i2c };
|
|
int k = 0;
|
|
u8 new_addr = 0;
|
|
|
|
for (k = no_of_demods-1; k >= 0; k--) {
|
|
st.cfg = cfg[k];
|
|
|
|
/* designated i2c address */
|
|
new_addr = (0x40 + k) << 1;
|
|
st.i2c_addr = new_addr;
|
|
if (dib7000m_identify(&st) != 0) {
|
|
st.i2c_addr = default_addr;
|
|
if (dib7000m_identify(&st) != 0) {
|
|
dprintk("DiB7000M #%d: not identified", k);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* start diversity to pull_down div_str - just for i2c-enumeration */
|
|
dib7000m_set_output_mode(&st, OUTMODE_DIVERSITY);
|
|
|
|
dib7000m_write_word(&st, 1796, 0x0); // select DVB-T output
|
|
|
|
/* set new i2c address and force divstart */
|
|
dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2);
|
|
|
|
dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
|
|
}
|
|
|
|
for (k = 0; k < no_of_demods; k++) {
|
|
st.cfg = cfg[k];
|
|
st.i2c_addr = (0x40 + k) << 1;
|
|
|
|
// unforce divstr
|
|
dib7000m_write_word(&st,1794, st.i2c_addr << 2);
|
|
|
|
/* deactivate div - it was just for i2c-enumeration */
|
|
dib7000m_set_output_mode(&st, OUTMODE_HIGH_Z);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(dib7000m_i2c_enumeration);
|
|
|
|
static struct dvb_frontend_ops dib7000m_ops;
|
|
struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg)
|
|
{
|
|
struct dvb_frontend *demod;
|
|
struct dib7000m_state *st;
|
|
st = kzalloc(sizeof(struct dib7000m_state), GFP_KERNEL);
|
|
if (st == NULL)
|
|
return NULL;
|
|
|
|
memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config));
|
|
st->i2c_adap = i2c_adap;
|
|
st->i2c_addr = i2c_addr;
|
|
|
|
demod = &st->demod;
|
|
demod->demodulator_priv = st;
|
|
memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
|
|
|
|
st->timf_default = cfg->bw->timf;
|
|
|
|
if (dib7000m_identify(st) != 0)
|
|
goto error;
|
|
|
|
if (st->revision == 0x4000)
|
|
dibx000_init_i2c_master(&st->i2c_master, DIB7000, st->i2c_adap, st->i2c_addr);
|
|
else
|
|
dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c_adap, st->i2c_addr);
|
|
|
|
dib7000m_demod_reset(st);
|
|
|
|
return demod;
|
|
|
|
error:
|
|
kfree(st);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(dib7000m_attach);
|
|
|
|
static struct dvb_frontend_ops dib7000m_ops = {
|
|
.info = {
|
|
.name = "DiBcom 7000MA/MB/PA/PB/MC",
|
|
.type = FE_OFDM,
|
|
.frequency_min = 44250000,
|
|
.frequency_max = 867250000,
|
|
.frequency_stepsize = 62500,
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_RECOVER |
|
|
FE_CAN_HIERARCHY_AUTO,
|
|
},
|
|
|
|
.release = dib7000m_release,
|
|
|
|
.init = dib7000m_wakeup,
|
|
.sleep = dib7000m_sleep,
|
|
|
|
.set_frontend = dib7000m_set_frontend,
|
|
.get_tune_settings = dib7000m_fe_get_tune_settings,
|
|
.get_frontend = dib7000m_get_frontend,
|
|
|
|
.read_status = dib7000m_read_status,
|
|
.read_ber = dib7000m_read_ber,
|
|
.read_signal_strength = dib7000m_read_signal_strength,
|
|
.read_snr = dib7000m_read_snr,
|
|
.read_ucblocks = dib7000m_read_unc_blocks,
|
|
};
|
|
|
|
MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
|
|
MODULE_DESCRIPTION("Driver for the DiBcom 7000MA/MB/PA/PB/MC COFDM demodulator");
|
|
MODULE_LICENSE("GPL");
|