965f8bbc6c
Driver support for the monitor mode support that will be available in the next OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2). To activate monitor mode, echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap where mode is the hex mask that specifies which frames to sniff (in short, 0x1 for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero mode will activate the monitor mode, inhibiting transmission in ethX and mshX interfaces and routing all the incoming traffic to a new rtapX interface that will output the packets in 802.11+radiotap headers format. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
283 lines
7.2 KiB
C
283 lines
7.2 KiB
C
/**
|
|
* This file contains the handling of TX in wlan driver.
|
|
*/
|
|
#include <linux/netdevice.h>
|
|
|
|
#include "hostcmd.h"
|
|
#include "radiotap.h"
|
|
#include "decl.h"
|
|
#include "defs.h"
|
|
#include "dev.h"
|
|
#include "wext.h"
|
|
|
|
/**
|
|
* @brief This function converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
|
|
* units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
|
|
*
|
|
* @param rate Input rate
|
|
* @return Output Rate (0 if invalid)
|
|
*/
|
|
static u32 convert_radiotap_rate_to_mv(u8 rate)
|
|
{
|
|
switch (rate) {
|
|
case 2: /* 1 Mbps */
|
|
return 0 | (1 << 4);
|
|
case 4: /* 2 Mbps */
|
|
return 1 | (1 << 4);
|
|
case 11: /* 5.5 Mbps */
|
|
return 2 | (1 << 4);
|
|
case 22: /* 11 Mbps */
|
|
return 3 | (1 << 4);
|
|
case 12: /* 6 Mbps */
|
|
return 4 | (1 << 4);
|
|
case 18: /* 9 Mbps */
|
|
return 5 | (1 << 4);
|
|
case 24: /* 12 Mbps */
|
|
return 6 | (1 << 4);
|
|
case 36: /* 18 Mbps */
|
|
return 7 | (1 << 4);
|
|
case 48: /* 24 Mbps */
|
|
return 8 | (1 << 4);
|
|
case 72: /* 36 Mbps */
|
|
return 9 | (1 << 4);
|
|
case 96: /* 48 Mbps */
|
|
return 10 | (1 << 4);
|
|
case 108: /* 54 Mbps */
|
|
return 11 | (1 << 4);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief This function processes a single packet and sends
|
|
* to IF layer
|
|
*
|
|
* @param priv A pointer to wlan_private structure
|
|
* @param skb A pointer to skb which includes TX packet
|
|
* @return 0 or -1
|
|
*/
|
|
static int SendSinglePacket(wlan_private * priv, struct sk_buff *skb)
|
|
{
|
|
int ret = 0;
|
|
struct txpd localtxpd;
|
|
struct txpd *plocaltxpd = &localtxpd;
|
|
u8 *p802x_hdr;
|
|
struct tx_radiotap_hdr *pradiotap_hdr;
|
|
u32 new_rate;
|
|
u8 *ptr = priv->adapter->tmptxbuf;
|
|
|
|
lbs_deb_enter(LBS_DEB_TX);
|
|
|
|
if (priv->adapter->surpriseremoved)
|
|
return -1;
|
|
|
|
if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) {
|
|
lbs_deb_tx("tx err: skb length %d 0 or > %zd\n",
|
|
skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE);
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
memset(plocaltxpd, 0, sizeof(struct txpd));
|
|
|
|
plocaltxpd->tx_packet_length = cpu_to_le16(skb->len);
|
|
|
|
/* offset of actual data */
|
|
plocaltxpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
|
|
|
|
p802x_hdr = skb->data;
|
|
if (priv->adapter->monitormode != WLAN_MONITOR_OFF) {
|
|
|
|
/* locate radiotap header */
|
|
pradiotap_hdr = (struct tx_radiotap_hdr *)skb->data;
|
|
|
|
/* set txpd fields from the radiotap header */
|
|
new_rate = convert_radiotap_rate_to_mv(pradiotap_hdr->rate);
|
|
if (new_rate != 0) {
|
|
/* use new tx_control[4:0] */
|
|
plocaltxpd->tx_control = cpu_to_le32(new_rate);
|
|
}
|
|
|
|
/* skip the radiotap header */
|
|
p802x_hdr += sizeof(struct tx_radiotap_hdr);
|
|
plocaltxpd->tx_packet_length =
|
|
cpu_to_le16(le16_to_cpu(plocaltxpd->tx_packet_length)
|
|
- sizeof(struct tx_radiotap_hdr));
|
|
|
|
}
|
|
/* copy destination address from 802.3 or 802.11 header */
|
|
if (priv->adapter->monitormode != WLAN_MONITOR_OFF)
|
|
memcpy(plocaltxpd->tx_dest_addr_high, p802x_hdr + 4, ETH_ALEN);
|
|
else
|
|
memcpy(plocaltxpd->tx_dest_addr_high, p802x_hdr, ETH_ALEN);
|
|
|
|
lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) plocaltxpd, sizeof(struct txpd));
|
|
|
|
if (IS_MESH_FRAME(skb)) {
|
|
plocaltxpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
|
|
}
|
|
|
|
memcpy(ptr, plocaltxpd, sizeof(struct txpd));
|
|
|
|
ptr += sizeof(struct txpd);
|
|
|
|
lbs_deb_hex(LBS_DEB_TX, "Tx Data", (u8 *) p802x_hdr, le16_to_cpu(plocaltxpd->tx_packet_length));
|
|
memcpy(ptr, p802x_hdr, le16_to_cpu(plocaltxpd->tx_packet_length));
|
|
ret = priv->hw_host_to_card(priv, MVMS_DAT,
|
|
priv->adapter->tmptxbuf,
|
|
le16_to_cpu(plocaltxpd->tx_packet_length) +
|
|
sizeof(struct txpd));
|
|
|
|
if (ret) {
|
|
lbs_deb_tx("tx err: hw_host_to_card returned 0x%X\n", ret);
|
|
goto done;
|
|
}
|
|
|
|
lbs_deb_tx("SendSinglePacket succeeds\n");
|
|
|
|
done:
|
|
if (!ret) {
|
|
priv->stats.tx_packets++;
|
|
priv->stats.tx_bytes += skb->len;
|
|
} else {
|
|
priv->stats.tx_dropped++;
|
|
priv->stats.tx_errors++;
|
|
}
|
|
|
|
if (!ret && priv->adapter->monitormode != WLAN_MONITOR_OFF) {
|
|
/* Keep the skb to echo it back once Tx feedback is
|
|
received from FW */
|
|
skb_orphan(skb);
|
|
/* stop processing outgoing pkts */
|
|
netif_stop_queue(priv->dev);
|
|
if (priv->mesh_dev)
|
|
netif_stop_queue(priv->mesh_dev);
|
|
/* freeze any packets already in our queues */
|
|
priv->adapter->TxLockFlag = 1;
|
|
} else {
|
|
dev_kfree_skb_any(skb);
|
|
priv->adapter->currenttxskb = NULL;
|
|
}
|
|
|
|
lbs_deb_leave_args(LBS_DEB_TX, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
|
|
void libertas_tx_runqueue(wlan_private *priv)
|
|
{
|
|
wlan_adapter *adapter = priv->adapter;
|
|
int i;
|
|
|
|
spin_lock(&adapter->txqueue_lock);
|
|
for (i = 0; i < adapter->tx_queue_idx; i++) {
|
|
struct sk_buff *skb = adapter->tx_queue_ps[i];
|
|
spin_unlock(&adapter->txqueue_lock);
|
|
SendSinglePacket(priv, skb);
|
|
spin_lock(&adapter->txqueue_lock);
|
|
}
|
|
adapter->tx_queue_idx = 0;
|
|
spin_unlock(&adapter->txqueue_lock);
|
|
}
|
|
|
|
static void wlan_tx_queue(wlan_private *priv, struct sk_buff *skb)
|
|
{
|
|
wlan_adapter *adapter = priv->adapter;
|
|
|
|
spin_lock(&adapter->txqueue_lock);
|
|
|
|
WARN_ON(priv->adapter->tx_queue_idx >= NR_TX_QUEUE);
|
|
adapter->tx_queue_ps[adapter->tx_queue_idx++] = skb;
|
|
if (adapter->tx_queue_idx == NR_TX_QUEUE) {
|
|
netif_stop_queue(priv->dev);
|
|
if (priv->mesh_dev)
|
|
netif_stop_queue(priv->mesh_dev);
|
|
} else {
|
|
netif_start_queue(priv->dev);
|
|
if (priv->mesh_dev)
|
|
netif_start_queue(priv->mesh_dev);
|
|
}
|
|
|
|
spin_unlock(&adapter->txqueue_lock);
|
|
}
|
|
|
|
/**
|
|
* @brief This function checks the conditions and sends packet to IF
|
|
* layer if everything is ok.
|
|
*
|
|
* @param priv A pointer to wlan_private structure
|
|
* @return n/a
|
|
*/
|
|
int libertas_process_tx(wlan_private * priv, struct sk_buff *skb)
|
|
{
|
|
int ret = -1;
|
|
|
|
lbs_deb_enter(LBS_DEB_TX);
|
|
lbs_deb_hex(LBS_DEB_TX, "TX Data", skb->data, min_t(unsigned int, skb->len, 100));
|
|
|
|
if (priv->dnld_sent) {
|
|
lbs_pr_alert( "TX error: dnld_sent = %d, not sending\n",
|
|
priv->dnld_sent);
|
|
goto done;
|
|
}
|
|
|
|
if ((priv->adapter->psstate == PS_STATE_SLEEP) ||
|
|
(priv->adapter->psstate == PS_STATE_PRE_SLEEP)) {
|
|
wlan_tx_queue(priv, skb);
|
|
return ret;
|
|
}
|
|
|
|
priv->adapter->currenttxskb = skb;
|
|
|
|
ret = SendSinglePacket(priv, skb);
|
|
done:
|
|
lbs_deb_leave_args(LBS_DEB_TX, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function sends to the host the last transmitted packet,
|
|
* filling the radiotap headers with transmission information.
|
|
*
|
|
* @param priv A pointer to wlan_private structure
|
|
* @param status A 32 bit value containing transmission status.
|
|
*
|
|
* @returns void
|
|
*/
|
|
void libertas_send_tx_feedback(wlan_private * priv)
|
|
{
|
|
wlan_adapter *adapter = priv->adapter;
|
|
struct tx_radiotap_hdr *radiotap_hdr;
|
|
u32 status = adapter->eventcause;
|
|
int txfail;
|
|
int try_count;
|
|
|
|
if (adapter->monitormode == WLAN_MONITOR_OFF ||
|
|
adapter->currenttxskb == NULL)
|
|
return;
|
|
|
|
radiotap_hdr = (struct tx_radiotap_hdr *)adapter->currenttxskb->data;
|
|
|
|
txfail = (status >> 24);
|
|
|
|
#if 0
|
|
/* The version of roofnet that we've tested does not use this yet
|
|
* But it may be used in the future.
|
|
*/
|
|
if (txfail)
|
|
radiotap_hdr->flags &= IEEE80211_RADIOTAP_F_TX_FAIL;
|
|
#endif
|
|
try_count = (status >> 16) & 0xff;
|
|
radiotap_hdr->data_retries = (try_count) ?
|
|
(1 + adapter->txretrycount - try_count) : 0;
|
|
libertas_upload_rx_packet(priv, adapter->currenttxskb);
|
|
adapter->currenttxskb = NULL;
|
|
priv->adapter->TxLockFlag = 0;
|
|
if (priv->adapter->connect_status == LIBERTAS_CONNECTED) {
|
|
netif_wake_queue(priv->dev);
|
|
if (priv->mesh_dev)
|
|
netif_wake_queue(priv->mesh_dev);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(libertas_send_tx_feedback);
|