Mark A. Greer 7bbdc3d51c serial: MPSC: set baudrate when BRG divider is set. ... The clock to generate the desired baudrate with the MPSC is first divided by the Baud Rate Generator (BRG) and then by the MPSC itself. So, when the BRG divider is changed, the MPSC divider must also be changed to generate the correct baudrate. During MPSC initialization, the BRG divider is changed but the MPSC divider isn't changed until much later. This results in some printk's coming out garbled. To fix that, set the MPSC divider at the same time that the BRG divider is changed. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2008-02-05 09:44:10 -08:00
..
cpm_uart	[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c	2008-01-28 08:31:05 -06:00
jsm
8250_accent.c
8250_acorn.c
8250_au1x00.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c	serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h	2008-02-05 09:44:09 -08:00
8250_pnp.c	serial: Coding style	2008-02-05 09:44:10 -08:00
8250.c	serial: Coding style	2008-02-05 09:44:10 -08:00
8250.h
21285.c	[ARM] 21285 serial: fix build error	2008-02-04 13:14:06 +00:00
68328serial.c	m68knommu: use IRQF_DISABLE in m68328serial.c	2008-02-01 21:00:01 +11:00
68328serial.h
68360serial.c
amba-pl010.c
amba-pl011.c
atmel_serial.c	[ARM] 4660/3: at91: allow selecting UART for early kernel messages	2008-02-04 13:16:39 +00:00
bfin_5xx.c	[Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option	2008-01-22 15:29:18 +08:00
clps711x.c
crisv10.c	CRISv10 serial driver rewrite	2007-11-14 18:45:46 -08:00
crisv10.h	CRISv10 serial driver rewrite	2007-11-14 18:45:46 -08:00
dz.c
dz.h
icom.c	kobject: convert icom to use kref, not kobject	2008-01-24 20:40:09 -08:00
icom.h	Coding style fix drivers/serial/icom.h	2008-02-03 14:47:38 +02:00
imx.c
ioc3_serial.c
ioc4_serial.c
ip22zilog.c	IP22ZILOG: fix lockup and sysrq	2007-11-29 09:24:53 -08:00
ip22zilog.h
Kconfig	SERIAL_NETX_CONSOLE provides console for NetX, not IMX	2008-02-03 14:55:57 +02:00
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	m68knommu: build support for new ColdFire serial driver	2008-02-01 20:54:03 +11:00
mcf.c	m68knommu: use container_of in mcf.c	2008-02-01 21:00:01 +11:00
mcfserial.c
mcfserial.h
mpc52xx_uart.c	[POWERPC] mpc5200: normalize compatible property bindings	2008-01-26 15:26:01 -07:00
mpsc.c	serial: MPSC: set baudrate when BRG divider is set.	2008-02-05 09:44:10 -08:00
mux.c	drivers/serial/: Spelling fixes	2008-02-03 17:29:25 +02:00
netx-serial.c
of_serial.c
pmac_zilog.c
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	[ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled	2007-11-26 14:39:12 +00:00
s3c2410.c	drivers/serial/s3c2410.c: remove dead config symbols	2008-02-05 09:44:09 -08:00
sa1100.c
sb1250-duart.c
serial_core.c	serial: speed setup failure reporting	2008-02-05 09:44:10 -08:00
serial_cs.c	pcmcia: replace kio_addr_t with unsigned int everywhere	2008-02-05 09:44:08 -08:00
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c
sh-sci.c	sh: Add support for SH7763 CPU subtype.	2008-01-28 13:19:02 +09:00
sh-sci.h	sh: Add support for SH7763 CPU subtype.	2008-01-28 13:19:02 +09:00
sn_console.c
suncore.c	[SERIAL]: Fix section mismatches in Sun serial console drivers.	2007-12-29 01:19:49 -08:00
suncore.h	[SERIAL] sparc: Infrastructure to fix section mismatch bugs.	2007-12-12 07:36:34 -08:00
sunhv.c	[SERIAL] sparc: Infrastructure to fix section mismatch bugs.	2007-12-12 07:36:34 -08:00
sunsab.c	[SERIAL] sparc: Infrastructure to fix section mismatch bugs.	2007-12-12 07:36:34 -08:00
sunsab.h
sunsu.c	[SERIAL] sparc: Infrastructure to fix section mismatch bugs.	2007-12-12 07:36:34 -08:00
sunzilog.c	[SERIAL] sparc: Infrastructure to fix section mismatch bugs.	2007-12-12 07:36:34 -08:00
sunzilog.h
uartlite.c	[POWERPC] Xilinx uartlite: Section type fixups	2008-01-09 07:59:00 -07:00
ucc_uart.c	[POWERPC] qe-uart: add support for Freescale QUICCEngine UART	2008-01-23 19:34:12 -06:00
v850e_uart.c
vr41xx_siu.c
zs.c
zs.h