a18255bef2
The min frequencies of the DVB-C frontends are wrong. In Europe, the center frequency of the lowest channel is 50.5MHz and not 51MHz. All known cards with the stv0297/tda0002x/ves1820 frontend are able to tune to this frequency. I've changed the range to the lowest channel - 1/2 bandwidth and the highest channel + 1/2 bandwidth. For the design of the dvb driver, the frequency ranges must be part of the tuner and not of the frontend itself. The same frontend may be used for different tuners. The attached patch does only fix the ranges and not the design. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
535 lines
14 KiB
C
535 lines
14 KiB
C
/*
|
|
TDA10023 - DVB-C decoder
|
|
(as used in Philips CU1216-3 NIM and the Reelbox DVB-C tuner card)
|
|
|
|
Copyright (C) 2005 Georg Acher, BayCom GmbH (acher at baycom dot de)
|
|
Copyright (c) 2006 Hartmut Birr (e9hack at gmail dot com)
|
|
|
|
Remotely based on tda10021.c
|
|
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
|
|
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
|
|
Support for TDA10021
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "tda1002x.h"
|
|
|
|
|
|
struct tda10023_state {
|
|
struct i2c_adapter* i2c;
|
|
/* configuration settings */
|
|
const struct tda1002x_config* config;
|
|
struct dvb_frontend frontend;
|
|
|
|
u8 pwm;
|
|
u8 reg0;
|
|
};
|
|
|
|
|
|
#define dprintk(x...)
|
|
|
|
static int verbose;
|
|
|
|
#define XTAL 28920000UL
|
|
#define PLL_M 8UL
|
|
#define PLL_P 4UL
|
|
#define PLL_N 1UL
|
|
#define SYSCLK (XTAL*PLL_M/(PLL_N*PLL_P)) // -> 57840000
|
|
|
|
static u8 tda10023_inittab[]={
|
|
// reg mask val
|
|
0x2a,0xff,0x02, // PLL3, Bypass, Power Down
|
|
0xff,0x64,0x00, // Sleep 100ms
|
|
0x2a,0xff,0x03, // PLL3, Bypass, Power Down
|
|
0xff,0x64,0x00, // Sleep 100ms
|
|
0x28,0xff,PLL_M-1, // PLL1 M=8
|
|
0x29,0xff,((PLL_P-1)<<6)|(PLL_N-1), // PLL2
|
|
0x00,0xff,0x23, // GPR FSAMPLING=1
|
|
0x2a,0xff,0x08, // PLL3 PSACLK=1
|
|
0xff,0x64,0x00, // Sleep 100ms
|
|
0x1f,0xff,0x00, // RESET
|
|
0xff,0x64,0x00, // Sleep 100ms
|
|
0xe6,0x0c,0x04, // RSCFG_IND
|
|
0x10,0xc0,0x80, // DECDVBCFG1 PBER=1
|
|
|
|
0x0e,0xff,0x82, // GAIN1
|
|
0x03,0x08,0x08, // CLKCONF DYN=1
|
|
0x2e,0xbf,0x30, // AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1 PPWMTUN=0 PPWMIF=0
|
|
0x01,0xff,0x30, // AGCREF
|
|
0x1e,0x84,0x84, // CONTROL SACLK_ON=1
|
|
0x1b,0xff,0xc8, // ADC TWOS=1
|
|
0x3b,0xff,0xff, // IFMAX
|
|
0x3c,0xff,0x00, // IFMIN
|
|
0x34,0xff,0x00, // PWMREF
|
|
0x35,0xff,0xff, // TUNMAX
|
|
0x36,0xff,0x00, // TUNMIN
|
|
0x06,0xff,0x7f, // EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 // 0x77
|
|
0x1c,0x30,0x30, // EQCONF2 STEPALGO=SGNALGO=1
|
|
0x37,0xff,0xf6, // DELTAF_LSB
|
|
0x38,0xff,0xff, // DELTAF_MSB
|
|
0x02,0xff,0x93, // AGCCONF1 IFS=1 KAGCIF=2 KAGCTUN=3
|
|
0x2d,0xff,0xf6, // SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2
|
|
0x04,0x10,0x00, // SWRAMP=1
|
|
0x12,0xff,0xa1, // INTP1 POCLKP=1 FEL=1 MFS=0
|
|
0x2b,0x01,0xa1, // INTS1
|
|
0x20,0xff,0x04, // INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=?
|
|
0x2c,0xff,0x0d, // INTP/S TRIP=0 TRIS=0
|
|
0xc4,0xff,0x00,
|
|
0xc3,0x30,0x00,
|
|
0xb5,0xff,0x19, // ERAGC_THD
|
|
0x00,0x03,0x01, // GPR, CLBS soft reset
|
|
0x00,0x03,0x03, // GPR, CLBS soft reset
|
|
0xff,0x64,0x00, // Sleep 100ms
|
|
0xff,0xff,0xff
|
|
};
|
|
|
|
static u8 tda10023_readreg (struct tda10023_state* state, u8 reg)
|
|
{
|
|
u8 b0 [] = { reg };
|
|
u8 b1 [] = { 0 };
|
|
struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
|
|
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
|
|
int ret;
|
|
|
|
ret = i2c_transfer (state->i2c, msg, 2);
|
|
if (ret != 2)
|
|
printk("DVB: TDA10023: %s: readreg error (ret == %i)\n",
|
|
__FUNCTION__, ret);
|
|
return b1[0];
|
|
}
|
|
|
|
static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data)
|
|
{
|
|
u8 buf[] = { reg, data };
|
|
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
|
|
int ret;
|
|
|
|
ret = i2c_transfer (state->i2c, &msg, 1);
|
|
if (ret != 1)
|
|
printk("DVB: TDA10023(%d): %s, writereg error "
|
|
"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
|
|
state->frontend.dvb->num, __FUNCTION__, reg, data, ret);
|
|
|
|
return (ret != 1) ? -EREMOTEIO : 0;
|
|
}
|
|
|
|
|
|
static int tda10023_writebit (struct tda10023_state* state, u8 reg, u8 mask,u8 data)
|
|
{
|
|
if (mask==0xff)
|
|
return tda10023_writereg(state, reg, data);
|
|
else {
|
|
u8 val;
|
|
val=tda10023_readreg(state,reg);
|
|
val&=~mask;
|
|
val|=(data&mask);
|
|
return tda10023_writereg(state, reg, val);
|
|
}
|
|
}
|
|
|
|
static void tda10023_writetab(struct tda10023_state* state, u8* tab)
|
|
{
|
|
u8 r,m,v;
|
|
while (1) {
|
|
r=*tab++;
|
|
m=*tab++;
|
|
v=*tab++;
|
|
if (r==0xff) {
|
|
if (m==0xff)
|
|
break;
|
|
else
|
|
msleep(m);
|
|
}
|
|
else
|
|
tda10023_writebit(state,r,m,v);
|
|
}
|
|
}
|
|
|
|
//get access to tuner
|
|
static int lock_tuner(struct tda10023_state* state)
|
|
{
|
|
u8 buf[2] = { 0x0f, 0xc0 };
|
|
struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
|
|
|
|
if(i2c_transfer(state->i2c, &msg, 1) != 1)
|
|
{
|
|
printk("tda10023: lock tuner fails\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
//release access from tuner
|
|
static int unlock_tuner(struct tda10023_state* state)
|
|
{
|
|
u8 buf[2] = { 0x0f, 0x40 };
|
|
struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
|
|
|
|
if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
|
|
{
|
|
printk("tda10023: unlock tuner fails\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_setup_reg0 (struct tda10023_state* state, u8 reg0)
|
|
{
|
|
reg0 |= state->reg0 & 0x63;
|
|
|
|
tda10023_writereg (state, 0x00, reg0 & 0xfe);
|
|
tda10023_writereg (state, 0x00, reg0 | 0x01);
|
|
|
|
state->reg0 = reg0;
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr)
|
|
{
|
|
s32 BDR;
|
|
s32 BDRI;
|
|
s16 SFIL=0;
|
|
u16 NDEC = 0;
|
|
|
|
if (sr < (u32)(SYSCLK/98.40)) {
|
|
NDEC=3;
|
|
SFIL=1;
|
|
} else if (sr<(u32)(SYSCLK/64.0)) {
|
|
NDEC=3;
|
|
SFIL=0;
|
|
} else if (sr<(u32)(SYSCLK/49.2)) {
|
|
NDEC=2;
|
|
SFIL=1;
|
|
} else if (sr<(u32)(SYSCLK/32.0)) {
|
|
NDEC=2;
|
|
SFIL=0;
|
|
} else if (sr<(u32)(SYSCLK/24.6)) {
|
|
NDEC=1;
|
|
SFIL=1;
|
|
} else if (sr<(u32)(SYSCLK/16.0)) {
|
|
NDEC=1;
|
|
SFIL=0;
|
|
} else if (sr<(u32)(SYSCLK/12.3)) {
|
|
NDEC=0;
|
|
SFIL=1;
|
|
}
|
|
|
|
BDRI=SYSCLK*16;
|
|
BDRI>>=NDEC;
|
|
BDRI +=sr/2;
|
|
BDRI /=sr;
|
|
|
|
if (BDRI>255)
|
|
BDRI=255;
|
|
|
|
{
|
|
u64 BDRX;
|
|
|
|
BDRX=1<<(24+NDEC);
|
|
BDRX*=sr;
|
|
do_div(BDRX,SYSCLK); // BDRX/=SYSCLK;
|
|
|
|
BDR=(s32)BDRX;
|
|
}
|
|
// printk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n",sr,BDR,BDRI,NDEC);
|
|
tda10023_writebit (state, 0x03, 0xc0, NDEC<<6);
|
|
tda10023_writereg (state, 0x0a, BDR&255);
|
|
tda10023_writereg (state, 0x0b, (BDR>>8)&255);
|
|
tda10023_writereg (state, 0x0c, (BDR>>16)&31);
|
|
tda10023_writereg (state, 0x0d, BDRI);
|
|
tda10023_writereg (state, 0x3d, (SFIL<<7));
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_init (struct dvb_frontend *fe)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
dprintk("DVB: TDA10023(%d): init chip\n", fe->adapter->num);
|
|
|
|
tda10023_writetab(state, tda10023_inittab);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_set_parameters (struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *p)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
static int qamvals[6][6] = {
|
|
// QAM LOCKTHR MSETH AREF AGCREFNYQ ERAGCNYQ_THD
|
|
{ (5<<2), 0x78, 0x8c, 0x96, 0x78, 0x4c }, // 4 QAM
|
|
{ (0<<2), 0x87, 0xa2, 0x91, 0x8c, 0x57 }, // 16 QAM
|
|
{ (1<<2), 0x64, 0x74, 0x96, 0x8c, 0x57 }, // 32 QAM
|
|
{ (2<<2), 0x46, 0x43, 0x6a, 0x6a, 0x44 }, // 64 QAM
|
|
{ (3<<2), 0x36, 0x34, 0x7e, 0x78, 0x4c }, // 128 QAM
|
|
{ (4<<2), 0x26, 0x23, 0x6c, 0x5c, 0x3c }, // 256 QAM
|
|
};
|
|
|
|
int qam = p->u.qam.modulation;
|
|
|
|
if (qam < 0 || qam > 5)
|
|
return -EINVAL;
|
|
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe, p);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
tda10023_set_symbolrate (state, p->u.qam.symbol_rate);
|
|
tda10023_writereg (state, 0x05, qamvals[qam][1]);
|
|
tda10023_writereg (state, 0x08, qamvals[qam][2]);
|
|
tda10023_writereg (state, 0x09, qamvals[qam][3]);
|
|
tda10023_writereg (state, 0xb4, qamvals[qam][4]);
|
|
tda10023_writereg (state, 0xb6, qamvals[qam][5]);
|
|
|
|
// tda10023_writereg (state, 0x04, (p->inversion?0x12:0x32));
|
|
// tda10023_writebit (state, 0x04, 0x60, (p->inversion?0:0x20));
|
|
tda10023_writebit (state, 0x04, 0x40, 0x40);
|
|
tda10023_setup_reg0 (state, qamvals[qam][0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
int sync;
|
|
|
|
*status = 0;
|
|
|
|
//0x11[1] == CARLOCK -> Carrier locked
|
|
//0x11[2] == FSYNC -> Frame synchronisation
|
|
//0x11[3] == FEL -> Front End locked
|
|
//0x11[6] == NODVB -> DVB Mode Information
|
|
sync = tda10023_readreg (state, 0x11);
|
|
|
|
if (sync & 2)
|
|
*status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
|
|
|
|
if (sync & 4)
|
|
*status |= FE_HAS_SYNC|FE_HAS_VITERBI;
|
|
|
|
if (sync & 8)
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
u8 a,b,c;
|
|
a=tda10023_readreg(state, 0x14);
|
|
b=tda10023_readreg(state, 0x15);
|
|
c=tda10023_readreg(state, 0x16)&0xf;
|
|
tda10023_writebit (state, 0x10, 0xc0, 0x00);
|
|
|
|
*ber = a | (b<<8)| (c<<16);
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
u8 ifgain=tda10023_readreg(state, 0x2f);
|
|
|
|
u16 gain = ((255-tda10023_readreg(state, 0x17))) + (255-ifgain)/16;
|
|
// Max raw value is about 0xb0 -> Normalize to >0xf0 after 0x90
|
|
if (gain>0x90)
|
|
gain=gain+2*(gain-0x90);
|
|
if (gain>255)
|
|
gain=255;
|
|
|
|
*strength = (gain<<8)|gain;
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
u8 quality = ~tda10023_readreg(state, 0x18);
|
|
*snr = (quality << 8) | quality;
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
u8 a,b,c,d;
|
|
a= tda10023_readreg (state, 0x74);
|
|
b= tda10023_readreg (state, 0x75);
|
|
c= tda10023_readreg (state, 0x76);
|
|
d= tda10023_readreg (state, 0x77);
|
|
*ucblocks = a | (b<<8)|(c<<16)|(d<<24);
|
|
|
|
tda10023_writebit (state, 0x10, 0x20,0x00);
|
|
tda10023_writebit (state, 0x10, 0x20,0x20);
|
|
tda10023_writebit (state, 0x13, 0x01, 0x00);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
int sync,inv;
|
|
s8 afc = 0;
|
|
|
|
sync = tda10023_readreg(state, 0x11);
|
|
afc = tda10023_readreg(state, 0x19);
|
|
inv = tda10023_readreg(state, 0x04);
|
|
|
|
if (verbose) {
|
|
/* AFC only valid when carrier has been recovered */
|
|
printk(sync & 2 ? "DVB: TDA10023(%d): AFC (%d) %dHz\n" :
|
|
"DVB: TDA10023(%d): [AFC (%d) %dHz]\n",
|
|
state->frontend.dvb->num, afc,
|
|
-((s32)p->u.qam.symbol_rate * afc) >> 10);
|
|
}
|
|
|
|
p->inversion = (inv&0x20?0:1);
|
|
p->u.qam.modulation = ((state->reg0 >> 2) & 7) + QAM_16;
|
|
|
|
p->u.qam.fec_inner = FEC_NONE;
|
|
p->frequency = ((p->frequency + 31250) / 62500) * 62500;
|
|
|
|
if (sync & 2)
|
|
p->frequency -= ((s32)p->u.qam.symbol_rate * afc) >> 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
tda10023_writereg (state, 0x1b, 0x02); /* pdown ADC */
|
|
tda10023_writereg (state, 0x00, 0x80); /* standby */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
if (enable) {
|
|
lock_tuner(state);
|
|
} else {
|
|
unlock_tuner(state);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void tda10023_release(struct dvb_frontend* fe)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops tda10023_ops;
|
|
|
|
struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config,
|
|
struct i2c_adapter* i2c,
|
|
u8 pwm)
|
|
{
|
|
struct tda10023_state* state = NULL;
|
|
int i;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL);
|
|
if (state == NULL) goto error;
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops));
|
|
state->pwm = pwm;
|
|
for (i=0; i < ARRAY_SIZE(tda10023_inittab);i+=3) {
|
|
if (tda10023_inittab[i] == 0x00) {
|
|
state->reg0 = tda10023_inittab[i+2];
|
|
break;
|
|
}
|
|
}
|
|
|
|
// Wakeup if in standby
|
|
tda10023_writereg (state, 0x00, 0x33);
|
|
/* check if the demod is there */
|
|
if ((tda10023_readreg(state, 0x1a) & 0xf0) != 0x70) goto error;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dvb_frontend_ops tda10023_ops = {
|
|
|
|
.info = {
|
|
.name = "Philips TDA10023 DVB-C",
|
|
.type = FE_QAM,
|
|
.frequency_stepsize = 62500,
|
|
.frequency_min = 47000000,
|
|
.frequency_max = 862000000,
|
|
.symbol_rate_min = (SYSCLK/2)/64, /* SACLK/64 == (SYSCLK/2)/64 */
|
|
.symbol_rate_max = (SYSCLK/2)/4, /* SACLK/4 */
|
|
.caps = 0x400 | //FE_CAN_QAM_4
|
|
FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_128 | FE_CAN_QAM_256 |
|
|
FE_CAN_FEC_AUTO
|
|
},
|
|
|
|
.release = tda10023_release,
|
|
|
|
.init = tda10023_init,
|
|
.sleep = tda10023_sleep,
|
|
.i2c_gate_ctrl = tda10023_i2c_gate_ctrl,
|
|
|
|
.set_frontend = tda10023_set_parameters,
|
|
.get_frontend = tda10023_get_frontend,
|
|
|
|
.read_status = tda10023_read_status,
|
|
.read_ber = tda10023_read_ber,
|
|
.read_signal_strength = tda10023_read_signal_strength,
|
|
.read_snr = tda10023_read_snr,
|
|
.read_ucblocks = tda10023_read_ucblocks,
|
|
};
|
|
|
|
|
|
MODULE_DESCRIPTION("Philips TDA10023 DVB-C demodulator driver");
|
|
MODULE_AUTHOR("Georg Acher, Hartmut Birr");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(tda10023_attach);
|