eric miao fe69af002e [MTD] [NAND] support for pxa3xx ... This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>		2008-04-22 19:27:27 +01:00
..
akita.h
audio.h	[ALSA] Remove sound/driver.h	2008-01-31 17:29:48 +01:00
bitfield.h
camera.h	[ARM] pxa: V4L2 soc_camera driver for PXA270	2008-04-19 17:14:30 +01:00
cm-x270.h
colibri.h	[ARM] 4762/1: Basic support for Toradex Colibri module	2008-01-28 13:13:27 +00:00
corgi.h	[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix	2008-01-28 13:13:25 +00:00
debug-macro.S
dma.h
entry-macro.S	[ARM] 4840/1: pxa: fix the typo in get_irqnr_and_base	2008-02-29 22:47:23 +00:00
gpio.h	gpiolib support for the PXA architecture	2008-02-05 09:44:13 -08:00
gumstix.h	[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards	2008-04-19 11:29:06 +01:00
hardware.h
i2c.h	i2c-pxa: Add polling transfer	2008-01-27 18:14:50 +01:00
idp.h
io.h
irda.h	[ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks	2008-04-19 11:29:08 +01:00
irqs.h	[ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLD	2008-04-19 11:29:07 +01:00
littleton.h	[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)	2008-01-28 13:13:17 +00:00
lpd270.h
lubbock.h
magician.h	[ARM] 4952/1: magician: add LCD detection, LCD power switching, update pxafb settings	2008-04-19 11:29:07 +01:00
mainstone.h
memory.h
mfp-pxa2xx.h	[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}	2008-04-19 11:29:05 +01:00
mfp-pxa3xx.h	[ARM] pxa: make MFP configuration processor independent	2008-01-26 15:07:56 +00:00
mfp-pxa25x.h	[ARM] pxa: add MFP-alike pin configuration support for pxa{25x, 27x}	2008-04-19 11:29:04 +01:00
mfp-pxa27x.h	[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}	2008-04-19 11:29:05 +01:00
mfp-pxa300.h	[ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations	2008-01-26 15:07:56 +00:00
mfp-pxa320.h	[ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations	2008-01-26 15:07:56 +00:00
mfp.h	[ARM] pxa: make MFP configuration processor independent	2008-01-26 15:07:56 +00:00
mmc.h	[ARM] pxa: mmc: add 3rd host controller support for pxa310	2008-01-26 15:07:53 +00:00
mtd-xip.h
ohci.h
pcm027.h	[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module	2008-01-28 13:13:20 +00:00
pcm990_baseboard.h	[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270	2008-01-28 13:13:24 +00:00
pm.h
poodle.h
pxa2xx_spi.h	[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()	2008-01-26 15:07:52 +00:00
pxa2xx-gpio.h	[ARM] pxa: V4L2 soc_camera driver for PXA270	2008-04-19 17:14:30 +01:00
pxa2xx-regs.h	[ARM] pxa: move memory controller registers into pxa2xx-regs.h	2008-01-26 15:07:54 +00:00
pxa3xx_nand.h	[MTD] [NAND] support for pxa3xx	2008-04-22 19:27:27 +01:00
pxa3xx-regs.h	[ARM] 4830/1: Add support for the CLK_POUT pin on PXA3xx CPUs	2008-04-19 11:29:02 +01:00
pxa27x_keypad.h	[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()	2008-04-19 11:29:05 +01:00
pxa-regs.h	[ARM] 4959/1: PXA: Fix misprint in CICR1_RGBT_CONV	2008-04-19 11:29:07 +01:00
pxafb.h
regs-ssp.h	spi: pxa2xx_spi clock polarity fix	2008-02-23 17:12:14 -08:00
sharpsl.h	[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix	2008-01-28 13:13:25 +00:00
spitz.h	[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix	2008-01-28 13:13:25 +00:00
ssp.h	[ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free()	2008-01-26 15:07:51 +00:00
system.h
timex.h
tosa.h	[ARM] 5002/1: tosa: add two more leds	2008-04-19 11:29:09 +01:00
trizeps4.h
udc.h
uncompress.h	[ARM] 4718/1: Fix redefinition warnings in PXA uncompressor code	2008-01-26 15:07:52 +00:00
vmalloc.h
zylonite.h	[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line	2008-04-19 11:29:09 +01:00