1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
95 lines
2.6 KiB
C
95 lines
2.6 KiB
C
/*
|
|
* arch/sh/boards/renesas/edosk7705/io.c
|
|
*
|
|
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
|
|
* Based largely on io_se.c.
|
|
*
|
|
* I/O routines for Hitachi EDOSK7705 board.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <asm/io.h>
|
|
#include <asm/edosk7705/io.h>
|
|
#include <asm/addrspace.h>
|
|
|
|
#define SMC_IOADDR 0xA2000000
|
|
|
|
#define maybebadio(name,port) \
|
|
printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
|
|
#name, (port), (__u32) __builtin_return_address(0))
|
|
|
|
/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
|
|
unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
|
|
{
|
|
if (port >= 0x300 && port < 0x320) {
|
|
/* SMC91C96 registers are 4 byte aligned rather than the
|
|
* usual 2 byte!
|
|
*/
|
|
return SMC_IOADDR + ( (port - 0x300) * 2);
|
|
}
|
|
|
|
maybebadio(sh_edosk7705_isa_port2addr, port);
|
|
return port;
|
|
}
|
|
|
|
/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
|
|
* registers causes problems. So we bit-shift the value and read / write
|
|
* in 2 byte chunks. Setting the low byte to 0 does not cause problems
|
|
* now as odd byte writes are only made on the bit mask / interrupt
|
|
* register. This may not be the case in future Mar-2003 SJD
|
|
*/
|
|
unsigned char sh_edosk7705_inb(unsigned long port)
|
|
{
|
|
if (port >= 0x300 && port < 0x320 && port & 0x01) {
|
|
return (volatile unsigned char)(generic_inw(port -1) >> 8);
|
|
}
|
|
return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
|
|
}
|
|
|
|
unsigned int sh_edosk7705_inl(unsigned long port)
|
|
{
|
|
return *(volatile unsigned long *)port;
|
|
}
|
|
|
|
void sh_edosk7705_outb(unsigned char value, unsigned long port)
|
|
{
|
|
if (port >= 0x300 && port < 0x320 && port & 0x01) {
|
|
generic_outw(((unsigned short)value << 8), port -1);
|
|
return;
|
|
}
|
|
*(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
|
|
}
|
|
|
|
void sh_edosk7705_outl(unsigned int value, unsigned long port)
|
|
{
|
|
*(volatile unsigned long *)port = value;
|
|
}
|
|
|
|
void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
|
|
{
|
|
unsigned char *p = addr;
|
|
while (count--) *p++ = sh_edosk7705_inb(port);
|
|
}
|
|
|
|
void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
|
|
{
|
|
unsigned long *p = (unsigned long*)addr;
|
|
while (count--)
|
|
*p++ = *(volatile unsigned long *)port;
|
|
}
|
|
|
|
void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
|
|
{
|
|
unsigned char *p = (unsigned char*)addr;
|
|
while (count--) sh_edosk7705_outb(*p++, port);
|
|
}
|
|
|
|
void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
|
|
{
|
|
unsigned long *p = (unsigned long*)addr;
|
|
while (count--) sh_edosk7705_outl(*p++, port);
|
|
}
|
|
|