w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2025-05-23 18:02:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
WSJT-X/Transceiver/HamlibTransceiver.hpp

42 lines
1.2 KiB
C++
Raw Normal View History

Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
#ifndef HAMLIB_TRANSCEIVER_HPP_
#define HAMLIB_TRANSCEIVER_HPP_
#include <QString>
#include "TransceiverFactory.hpp"
#include "PollingTransceiver.hpp"
Remove direct struct access from usage of the Hamlib API Preparation for safe dynamic linking to Hamlib where minor Hamlib upgrades can be deployed just by replacing the DLL/SO.
2021-02-02 22:45:45 +00:00
#include "pimpl_h.hpp"
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
// hamlib transceiver and PTT mostly delegated directly to hamlib Rig class
class HamlibTransceiver final
: public PollingTransceiver
{
Preparation for UI i18n Re-enabling the WSJT-X i18n facilities. This allows translation files to be created for languages that are automatically used to lookup translatable strings. To enable a new language the language name must be added to the CMakeLists.txt LANGUAGES list variable in BCP47 format (i.e. en_US, en_GB, pt_PT, ...). Do one build with the CMake option UPDATE_TRANSLATIONS enabled (do not leave it enabled as there is a danger of loosing existing translated texts), that will create a fresh translations/wsjtx_<lang>.ts file which should be immediately checked in with the CMakeLists.txt change. The .ts should then be updated by the translator using the Qt Linguist tool to add translations. Check in the updated .ts file to complete the initial translation process for that language. To aid translators their WIP .ts file may be tested by releasing (using the lrelease tool or from the Linguist menu) a .qm file and placing that .qm file in the current directory before starting WSJT-X. The translations will be used if the system locale matches the file name. If the system locale does not match the file name; the language may be overridden by setting the LANG environment variable. For example if a wsjtx_pt_PT.qm file is in the current directory WSJT-X will use it for translation lookups, regardless of the current system locale setting, if the LANG variable is set to pt_PT or pt-PT. On MS Windows from a command prompt: set LANG=pt_PT C:\WSJT\wsjtx\bin\wsjtx elsewhere: LANG=pt_PT wsjtx
2019-06-06 12:56:25 +01:00
Q_OBJECT // for translation context
Added context information to Hamlib interface exception messages. Enhanced TransceiverBase error exception type to allow for language translatable messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4033 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-16 14:59:00 +00:00
Preparation for UI i18n Re-enabling the WSJT-X i18n facilities. This allows translation files to be created for languages that are automatically used to lookup translatable strings. To enable a new language the language name must be added to the CMakeLists.txt LANGUAGES list variable in BCP47 format (i.e. en_US, en_GB, pt_PT, ...). Do one build with the CMake option UPDATE_TRANSLATIONS enabled (do not leave it enabled as there is a danger of loosing existing translated texts), that will create a fresh translations/wsjtx_<lang>.ts file which should be immediately checked in with the CMakeLists.txt change. The .ts should then be updated by the translator using the Qt Linguist tool to add translations. Check in the updated .ts file to complete the initial translation process for that language. To aid translators their WIP .ts file may be tested by releasing (using the lrelease tool or from the Linguist menu) a .qm file and placing that .qm file in the current directory before starting WSJT-X. The translations will be used if the system locale matches the file name. If the system locale does not match the file name; the language may be overridden by setting the LANG environment variable. For example if a wsjtx_pt_PT.qm file is in the current directory WSJT-X will use it for translation lookups, regardless of the current system locale setting, if the LANG variable is set to pt_PT or pt-PT. On MS Windows from a command prompt: set LANG=pt_PT C:\WSJT\wsjtx\bin\wsjtx elsewhere: LANG=pt_PT wsjtx
2019-06-06 12:56:25 +01:00
public:
Add a log channel for rig control RIGCTRL is defined as a log channel for rig control messages and the appropriate logger is made available to children of the Transceiver class. Use Transceiver::logger() to access the logger. Switched existing rig control QDebug messages to Boost logging.
2020-09-25 02:37:41 +01:00
static void register_transceivers (logger_type *, TransceiverFactory::Transceivers *);
Fix numerous memory leaks and uses of uninitialized variables These were discovered when running under teh valgrind MemCheck tool. I have also checked in a suppressions file (wsjtx-valgrind.linux.supp) suitable for use on Linux when running the valgrind MemCheck tool. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-10 15:54:16 +00:00
static void unregister_transceivers ();
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
Remove direct struct access from usage of the Hamlib API Preparation for safe dynamic linking to Hamlib where minor Hamlib upgrades can be deployed just by replacing the DLL/SO.
2021-02-02 22:45:45 +00:00
explicit HamlibTransceiver (logger_type *, unsigned model_number, TransceiverFactory::ParameterPack const&,
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
QObject * parent = nullptr);
Add a log channel for rig control RIGCTRL is defined as a log channel for rig control messages and the appropriate logger is made available to children of the Transceiver class. Use Transceiver::logger() to access the logger. Switched existing rig control QDebug messages to Boost logging.
2020-09-25 02:37:41 +01:00
explicit HamlibTransceiver (logger_type *, TransceiverFactory::PTTMethod ptt_type, QString const& ptt_port,
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
QObject * parent = nullptr);
Remove direct struct access from usage of the Hamlib API Preparation for safe dynamic linking to Hamlib where minor Hamlib upgrades can be deployed just by replacing the DLL/SO.
2021-02-02 22:45:45 +00:00
~HamlibTransceiver ();
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
Add a log channel for rig control RIGCTRL is defined as a log channel for rig control messages and the appropriate logger is made available to children of the Transceiver class. Use Transceiver::logger() to access the logger. Switched existing rig control QDebug messages to Boost logging.
2020-09-25 02:37:41 +01:00
private:
Turn on Hamlib PTT sharing by default and always apply config overrides
2021-02-17 15:45:54 +00:00
void load_user_settings ();
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
int do_start () override;
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
void do_stop () override;
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
void do_frequency (Frequency, MODE, bool no_ignore) override;
Take advantage of the forthcommng DX Lab Commander enhancement V12.2.6 of teh DX Lab Suite Commander finally has a way to suppress mode rationalization when setting the split Tx frequency. This now means that we can now honor the radio setting to not change the rig modulation mode. This should help with a number of rigs that require different modes on teh Tx and Rx VFOs for optimal wide band digital operation. This will also help with some rig and interface combinations that lock up or otherwise misbehave when setting the Tx VFO mode at certain times with respect to other rig control commands. This change also improves mode setting in general hopefully closing a few corner case issues when starting up and when transmitting for the first time in a session. Included is the latest DX Lab Suite Commander TCP/IP commands documentation correct for v12.2.6. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7030 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-13 23:33:54 +00:00
void do_tx_frequency (Frequency, MODE, bool no_ignore) override;
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
void do_mode (MODE) override;
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
void do_ptt (bool) override;
Updates to Omni-Rig interface in line with suggestions from Alex, VE3NEA Includes tidying up some old and obsolete code.
2019-05-28 18:58:12 +01:00
void do_poll () override;
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
Remove direct struct access from usage of the Hamlib API Preparation for safe dynamic linking to Hamlib where minor Hamlib upgrades can be deployed just by replacing the DLL/SO.
2021-02-02 22:45:45 +00:00
class impl;
pimpl<impl> m_;
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
};
#endif
Reference in New Issue Copy Permalink