w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-16 00:51:56 -05:00
Code Issues Packages Projects Releases Wiki Activity
2b6ff14e4b
WSJT-X/mainwindow.ui

2906 lines
102 KiB
Plaintext
Raw Normal View History

Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
<?xml version="1.0" encoding="UTF-8"?>
<ui version="4.0">
<class>MainWindow</class>
<widget class="QMainWindow" name="MainWindow">
<property name="windowTitle">
<string>WSJT-X by K1JT</string>
</property>
<property name="styleSheet">
<string notr="true"/>
</property>
<widget class="QWidget" name="centralWidget">
<layout class="QVBoxLayout" name="verticalLayout_3">
<item>
<layout class="QVBoxLayout" name="verticalLayout" stretch="1,0,0">
<item>
<layout class="QGridLayout" name="gridLayout" columnstretch="0,0">
<property name="horizontalSpacing">
<number>3</number>
</property>
<property name="verticalSpacing">
<number>1</number>
</property>
<item row="1" column="0">
<widget class="QLabel" name="label_6">
<property name="maximumSize">
<size>
<width>500</width>
<height>16777215</height>
</size>
</property>
<property name="font">
<font>
<pointsize>10</pointsize>
<weight>50</weight>
<bold>false</bold>
</font>
</property>
<property name="text">
<string>Band Activity</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="2" column="1">
<widget class="Line" name="line_2">
<property name="frameShadow">
<enum>QFrame::Plain</enum>
</property>
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</widget>
</item>
<item row="3" column="0">
<widget class="QLabel" name="decodedTextLabel">
<property name="minimumSize">
<size>
<width>300</width>
<height>20</height>
</size>
</property>
<property name="maximumSize">
<size>
<width>600</width>
<height>20</height>
</size>
</property>
<property name="palette">
<palette>
<active>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
</active>
<inactive>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
</inactive>
<disabled>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
</disabled>
</palette>
</property>
<property name="autoFillBackground">
<bool>true</bool>
</property>
<property name="text">
<string>UTC dB DT Freq Dr </string>
</property>
<property name="textFormat">
<enum>Qt::PlainText</enum>
</property>
<property name="indent">
<number>5</number>
</property>
</widget>
</item>
<item row="2" column="0">
<widget class="Line" name="line">
<property name="frameShadow">
<enum>QFrame::Plain</enum>
</property>
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</widget>
</item>
<item row="3" column="1">
<widget class="QLabel" name="decodedTextLabel2">
<property name="minimumSize">
<size>
<width>300</width>
<height>20</height>
</size>
</property>
<property name="maximumSize">
<size>
<width>600</width>
<height>20</height>
</size>
</property>
<property name="palette">
<palette>
<active>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
</active>
<inactive>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
</inactive>
<disabled>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>170</red>
<green>170</green>
<blue>170</blue>
</color>
</brush>
</colorrole>
</disabled>
</palette>
</property>
<property name="autoFillBackground">
<bool>true</bool>
</property>
<property name="text">
<string>UTC dB DT Freq Dr </string>
</property>
<property name="textFormat">
<enum>Qt::PlainText</enum>
</property>
<property name="indent">
<number>5</number>
</property>
</widget>
</item>
<item row="4" column="1">
<widget class="DisplayText" name="decodedTextBrowser2">
<property name="enabled">
<bool>true</bool>
</property>
<property name="sizePolicy">
<sizepolicy hsizetype="MinimumExpanding" vsizetype="MinimumExpanding">
<horstretch>0</horstretch>
<verstretch>10</verstretch>
</sizepolicy>
</property>
<property name="minimumSize">
<size>
<width>200</width>
<height>100</height>
</size>
</property>
<property name="verticalScrollBarPolicy">
<enum>Qt::ScrollBarAlwaysOn</enum>
</property>
<property name="cursorWidth">
<number>0</number>
</property>
<property name="textInteractionFlags">
<set>Qt::TextSelectableByKeyboard|Qt::TextSelectableByMouse</set>
</property>
</widget>
</item>
<item row="1" column="1">
<widget class="QLabel" name="label_7">
<property name="font">
<font>
<pointsize>10</pointsize>
<weight>50</weight>
<bold>false</bold>
</font>
</property>
<property name="text">
<string>Rx Frequency</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="4" column="0">
<widget class="DisplayText" name="decodedTextBrowser">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Expanding">
<horstretch>0</horstretch>
<verstretch>10</verstretch>
</sizepolicy>
</property>
<property name="minimumSize">
<size>
<width>200</width>
<height>100</height>
</size>
</property>
<property name="frameShape">
<enum>QFrame::Panel</enum>
</property>
<property name="verticalScrollBarPolicy">
<enum>Qt::ScrollBarAlwaysOn</enum>
</property>
<property name="horizontalScrollBarPolicy">
<enum>Qt::ScrollBarAsNeeded</enum>
</property>
<property name="cursorWidth">
<number>0</number>
</property>
<property name="textInteractionFlags">
<set>Qt::TextSelectableByKeyboard|Qt::TextSelectableByMouse</set>
</property>
</widget>
</item>
</layout>
</item>
<item>
<layout class="QHBoxLayout" name="horizontalLayout_2">
<item>
<widget class="QPushButton" name="logQSOButton">
<property name="minimumSize">
<size>
<width>50</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Enter this QSO in ADIF log</string>
</property>
<property name="text">
<string>Log &amp;QSO</string>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="stopButton">
<property name="minimumSize">
<size>
<width>50</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Stop monitoring</string>
</property>
<property name="text">
<string>&amp;Stop</string>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="monitorButton">
<property name="minimumSize">
<size>
<width>50</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Start monitoring</string>
</property>
<property name="styleSheet">
<string notr="true">QPushButton:checked {
background-color: #00ff00;
border-style: outset;
border-width: 1px;
border-radius: 5px;
border-color: black;
min-width: 5em;
padding: 3px;
}</string>
</property>
<property name="text">
<string>&amp;Monitor</string>
</property>
<property name="checkable">
<bool>true</bool>
</property>
<property name="checked">
<bool>false</bool>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="EraseButton">
<property name="minimumSize">
<size>
<width>50</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Erase QSO Frequency window. Double-click for both windows</string>
</property>
<property name="text">
<string>&amp;Erase</string>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="ClrAvgButton">
<property name="enabled">
<bool>true</bool>
</property>
<property name="text">
<string>Clear Avg</string>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="DecodeButton">
<property name="minimumSize">
<size>
<width>50</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Decode most recent Rx period at QSO Frequency&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
</property>
<property name="styleSheet">
<string notr="true">QPushButton:checked {
background-color: cyan;
border-style: outset;
border-width: 1px;
border-radius: 5px;
border-color: black;
min-width: 5em;
padding: 3px;
}</string>
</property>
<property name="text">
<string>&amp;Decode</string>
</property>
<property name="checkable">
<bool>true</bool>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="autoButton">
<property name="minimumSize">
<size>
<width>50</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Toggle Tx Enable On/Off</string>
</property>
<property name="styleSheet">
<string notr="true">QPushButton:checked {
background-color: red;
border-style: outset;
border-width: 1px;
border-radius: 5px;
border-color: black;
min-width: 5em;
padding: 3px;
}</string>
</property>
<property name="text">
<string>E&amp;nable Tx</string>
</property>
<property name="checkable">
<bool>true</bool>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="stopTxButton">
<property name="minimumSize">
<size>
<width>50</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Stop transmitting immediately</string>
</property>
<property name="text">
<string>&amp;Halt Tx</string>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="tuneButton">
<property name="toolTip">
<string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Transmit a pure tone&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
</property>
<property name="styleSheet">
<string notr="true">QPushButton:checked {
background-color: red;
border-style: outset;
border-width: 1px;
border-radius: 5px;
border-color: black;
min-width: 5em;
padding: 3px;
}</string>
</property>
<property name="text">
<string>&amp;Tune</string>
</property>
<property name="checkable">
<bool>true</bool>
</property>
</widget>
</item>
</layout>
</item>
<item>
<layout class="QGridLayout" name="gridLayout_5" columnstretch="0,0,1,10,0">
<item row="0" column="2">
<widget class="QLabel" name="labDialFreq">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>USB dial frequency</string>
</property>
<property name="styleSheet">
<string notr="true">QLabel {
font-family: MS Shell Dlg 2;
font-size: 16pt;
color : yellow;
background-color : black;
}
QLabel[oob=&quot;true&quot;] {
background-color: red;
}
</string>
</property>
<property name="text">
<string>14.078 000</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="margin">
<number>5</number>
</property>
</widget>
</item>
<item row="0" column="3" rowspan="3">
<widget class="QStackedWidget" name="controls_stack_widget">
<property name="currentIndex">
<number>0</number>
</property>
<widget class="QWidget" name="page">
<layout class="QHBoxLayout" name="horizontalLayout_8">
<property name="leftMargin">
<number>0</number>
</property>
<property name="topMargin">
<number>0</number>
</property>
<property name="rightMargin">
<number>0</number>
</property>
<property name="bottomMargin">
<number>0</number>
</property>
<item>
<widget class="QWidget" name="QSO_controls_widget" native="true">
<layout class="QHBoxLayout" name="horizontalLayout_6" stretch="1,10">
<property name="leftMargin">
<number>0</number>
</property>
<property name="topMargin">
<number>0</number>
</property>
<property name="rightMargin">
<number>0</number>
</property>
<property name="bottomMargin">
<number>0</number>
</property>
<item>
<layout class="QGridLayout" name="gridLayout_3">
<item row="4" column="0">
<widget class="QCheckBox" name="cbTxLock">
<property name="toolTip">
<string>Tx frequency tracks Rx frequency</string>
</property>
<property name="text">
<string>Lock Tx=Rx</string>
</property>
</widget>
</item>
<item row="2" column="1">
<widget class="QPushButton" name="pbR2T">
<property name="sizePolicy">
<sizepolicy hsizetype="Maximum" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Set Tx frequency to Rx Frequency</string>
</property>
<property name="text">
<string>Tx ← Rx</string>
</property>
</widget>
</item>
<item row="1" column="1">
<widget class="QCheckBox" name="txFirstCheckBox">
<property name="toolTip">
<string>Check to Tx in even minutes, uncheck for odd minutes</string>
</property>
<property name="text">
<string>Tx even/1st</string>
</property>
</widget>
</item>
<item row="4" column="1">
<layout class="QHBoxLayout" name="horizontalLayout_4">
<property name="spacing">
<number>5</number>
</property>
<item>
<widget class="QSpinBox" name="rptSpinBox">
<property name="toolTip">
<string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Signal report (dB)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
</property>
<property name="prefix">
<string>Report </string>
</property>
<property name="minimum">
<number>-50</number>
</property>
<property name="maximum">
<number>49</number>
</property>
<property name="value">
<number>-15</number>
</property>
</widget>
</item>
</layout>
</item>
<item row="3" column="0">
<widget class="QSpinBox" name="RxFreqSpinBox">
<property name="toolTip">
<string>Audio Rx frequency</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="suffix">
<string> Hz</string>
</property>
<property name="prefix">
<string>Rx </string>
</property>
<property name="minimum">
<number>200</number>
</property>
<property name="maximum">
<number>5000</number>
</property>
<property name="value">
<number>1500</number>
</property>
</widget>
</item>
<item row="7" column="0" colspan="2">
<spacer name="verticalSpacer">
<property name="orientation">
<enum>Qt::Vertical</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>20</width>
<height>40</height>
</size>
</property>
</spacer>
</item>
<item row="2" column="0">
<widget class="QSpinBox" name="TxFreqSpinBox">
<property name="toolTip">
<string>Audio Tx frequency</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="suffix">
<string> Hz</string>
</property>
<property name="prefix">
<string>Tx </string>
</property>
<property name="minimum">
<number>200</number>
</property>
<property name="maximum">
<number>5000</number>
</property>
<property name="value">
<number>1500</number>
</property>
</widget>
</item>
<item row="1" column="0">
<widget class="QPushButton" name="pbTxMode">
<property name="enabled">
<bool>false</bool>
</property>
<property name="toolTip">
<string>Toggle Tx mode</string>
</property>
<property name="text">
<string>Tx JT9 @</string>
</property>
</widget>
</item>
<item row="0" column="0" colspan="2">
<spacer name="verticalSpacer_4">
<property name="orientation">
<enum>Qt::Vertical</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>20</width>
<height>40</height>
</size>
</property>
</spacer>
</item>
<item row="3" column="1">
<widget class="QPushButton" name="pbT2R">
<property name="sizePolicy">
<sizepolicy hsizetype="Maximum" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Set Rx frequency to Tx Frequency</string>
</property>
<property name="text">
<string>Rx ← Tx</string>
</property>
</widget>
</item>
<item row="5" column="0" rowspan="2" colspan="2">
<widget class="QWidget" name="VHFControls_widget" native="true">
<layout class="QGridLayout" name="gridLayout_8">
<property name="leftMargin">
<number>0</number>
</property>
<property name="topMargin">
<number>0</number>
</property>
<property name="rightMargin">
<number>0</number>
</property>
<property name="bottomMargin">
<number>0</number>
</property>
<item row="3" column="2">
<widget class="QCheckBox" name="cbFast9">
<property name="toolTip">
<string>Check for JT9 fast modes</string>
</property>
<property name="text">
<string>Fast</string>
</property>
</widget>
</item>
<item row="2" column="0" colspan="3">
<layout class="QHBoxLayout" name="horizontalLayout_5">
<item>
<spacer name="horizontalSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>40</width>
<height>20</height>
</size>
</property>
</spacer>
</item>
<item>
<widget class="QCheckBox" name="cbShMsgs">
<property name="maximumSize">
<size>
<width>60</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>Check to generate JT4 or JT65 shorthand messages.</string>
</property>
<property name="text">
<string>Sh</string>
</property>
</widget>
</item>
<item>
<widget class="QCheckBox" name="cbTx6">
<property name="enabled">
<bool>false</bool>
</property>
<property name="toolTip">
<string>Check to generate &quot;@1250 (SEND MSGS)&quot; in Tx6.</string>
</property>
<property name="text">
<string>Tx6</string>
</property>
</widget>
</item>
<item>
<widget class="QCheckBox" name="cbEME">
<property name="maximumSize">
<size>
<width>16777215</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>Check to add 2.5 s to expected propagation delay.</string>
</property>
<property name="text">
<string>EME delay</string>
</property>
</widget>
</item>
</layout>
</item>
<item row="0" column="0" colspan="3">
<layout class="QHBoxLayout" name="horizontalLayout_11">
<item>
<widget class="QSpinBox" name="syncSpinBox">
<property name="toolTip">
Synchorizing --> Synchronizing git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6924 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-15 21:01:06 -04:00
<string>Synchronizing threshold</string>
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="prefix">
<string>Sync </string>
</property>
<property name="minimum">
<number>-1</number>
</property>
<property name="maximum">
<number>10</number>
</property>
<property name="value">
<number>1</number>
</property>
</widget>
</item>
<item>
<spacer name="horizontalSpacer_4">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>40</width>
<height>20</height>
</size>
</property>
</spacer>
</item>
<item>
<widget class="QSpinBox" name="sbCQRxFreq">
<property name="enabled">
<bool>false</bool>
</property>
<property name="prefix">
<string>CQ Rx </string>
</property>
<property name="minimum">
<number>1</number>
</property>
<property name="maximum">
<number>999</number>
</property>
<property name="value">
<number>285</number>
</property>
</widget>
</item>
<item>
<widget class="QCheckBox" name="cbCQRx">
<property name="enabled">
<bool>true</bool>
</property>
<property name="maximumSize">
<size>
<width>20</width>
<height>16777215</height>
</size>
</property>
<property name="text">
<string/>
</property>
</widget>
</item>
</layout>
</item>
<item row="4" column="2">
<widget class="LettersSpinBox" name="sbFtol">
<property name="toolTip">
<string>Frequency tolerance (Hz)</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="prefix">
<string>F Tol </string>
</property>
<property name="minimum">
<number>21</number>
</property>
<property name="maximum">
<number>27</number>
</property>
</widget>
</item>
<item row="4" column="0">
<widget class="LettersSpinBox" name="sbTR">
<property name="toolTip">
<string>Tx/Rx sequence length</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="suffix">
<string> s</string>
</property>
<property name="prefix">
<string>T/R </string>
</property>
<property name="minimum">
<number>11</number>
</property>
<property name="maximum">
<number>14</number>
</property>
<property name="value">
<number>14</number>
</property>
</widget>
</item>
<item row="3" column="0">
<widget class="LettersSpinBox" name="sbSubmode">
<property name="toolTip">
<string>Submode controls tone spacing (A is narrowest)</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="prefix">
<string>Submode </string>
</property>
<property name="minimum">
<number>0</number>
</property>
<property name="maximum">
<number>7</number>
</property>
</widget>
</item>
<item row="3" column="1">
<spacer name="horizontalSpacer_5">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
<property name="sizeType">
<enum>QSizePolicy::Fixed</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>5</width>
<height>0</height>
</size>
</property>
</spacer>
</item>
</layout>
</widget>
</item>
</layout>
</item>
<item>
<widget class="QTabWidget" name="tabWidget">
<property name="tabPosition">
<enum>QTabWidget::West</enum>
</property>
<property name="tabShape">
<enum>QTabWidget::Triangular</enum>
</property>
<property name="currentIndex">
<number>1</number>
</property>
<widget class="QWidget" name="tab">
<attribute name="title">
<string>1</string>
</attribute>
<layout class="QGridLayout" name="gridLayout_6">
<property name="leftMargin">
<number>6</number>
</property>
<property name="topMargin">
<number>6</number>
</property>
<property name="rightMargin">
<number>6</number>
</property>
<property name="bottomMargin">
<number>6</number>
</property>
<item row="0" column="0">
<widget class="QPushButton" name="genStdMsgsPushButton">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Generate standard messages for minimal QSO</string>
</property>
<property name="text">
<string>Generate Std Msgs</string>
</property>
</widget>
</item>
<item row="0" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QLabel" name="label_5">
<property name="toolTip">
<string>Queue up the next Tx message</string>
</property>
<property name="text">
<string>Next</string>
</property>
</widget>
</item>
<item row="0" column="2" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QLabel" name="label_2">
<property name="toolTip">
<string>Switch to this Tx message NOW</string>
</property>
<property name="text">
<string>Now</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="1" column="0">
<widget class="QLineEdit" name="tx1">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="text">
<string/>
</property>
</widget>
</item>
<item row="1" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QRadioButton" name="txrb1">
<property name="toolTip">
<string>Send this message in next Tx interval</string>
</property>
<property name="text">
<string/>
</property>
<property name="shortcut">
<string>Ctrl+1</string>
</property>
<property name="checked">
<bool>false</bool>
</property>
<attribute name="buttonGroup">
<string notr="true">buttonGroup</string>
</attribute>
</widget>
</item>
<item row="1" column="2">
<widget class="QPushButton" name="txb1">
<property name="toolTip">
<string>Switch to this Tx message NOW</string>
</property>
<property name="layoutDirection">
<enum>Qt::LeftToRight</enum>
</property>
<property name="text">
<string>Tx &amp;1</string>
</property>
<property name="shortcut">
<string>Alt+1</string>
</property>
</widget>
</item>
<item row="2" column="0">
<widget class="QLineEdit" name="tx2">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
</widget>
</item>
<item row="2" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QRadioButton" name="txrb2">
<property name="toolTip">
<string>Send this message in next Tx interval</string>
</property>
<property name="text">
<string/>
</property>
<property name="shortcut">
<string>Ctrl+2</string>
</property>
<attribute name="buttonGroup">
<string notr="true">buttonGroup</string>
</attribute>
</widget>
</item>
<item row="2" column="2">
<widget class="QPushButton" name="txb2">
<property name="toolTip">
<string>Switch to this Tx message NOW</string>
</property>
<property name="text">
<string>Tx &amp;2</string>
</property>
<property name="shortcut">
<string>Alt+2</string>
</property>
</widget>
</item>
<item row="3" column="0">
<widget class="QLineEdit" name="tx3">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
</widget>
</item>
<item row="3" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QRadioButton" name="txrb3">
<property name="toolTip">
<string>Send this message in next Tx interval</string>
</property>
<property name="text">
<string/>
</property>
<property name="shortcut">
<string>Ctrl+3</string>
</property>
<attribute name="buttonGroup">
<string notr="true">buttonGroup</string>
</attribute>
</widget>
</item>
<item row="3" column="2">
<widget class="QPushButton" name="txb3">
<property name="toolTip">
<string>Switch to this Tx message NOW</string>
</property>
<property name="text">
<string>Tx &amp;3</string>
</property>
<property name="shortcut">
<string>Alt+3</string>
</property>
</widget>
</item>
<item row="4" column="0">
<widget class="QLineEdit" name="tx4">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
</widget>
</item>
<item row="4" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QRadioButton" name="txrb4">
<property name="toolTip">
<string>Send this message in next Tx interval</string>
</property>
<property name="text">
<string/>
</property>
<property name="shortcut">
<string>Ctrl+4</string>
</property>
<attribute name="buttonGroup">
<string notr="true">buttonGroup</string>
</attribute>
</widget>
</item>
<item row="4" column="2">
<widget class="QPushButton" name="txb4">
<property name="toolTip">
<string>Switch to this Tx message NOW</string>
</property>
<property name="text">
<string>Tx &amp;4</string>
</property>
<property name="shortcut">
<string>Alt+4</string>
</property>
</widget>
</item>
<item row="5" column="0">
<widget class="QComboBox" name="tx5">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Enter a free text message (maximum 13 characters)
or select a predefined macro from the dropdown list.
Press ENTER to add the current text to the predefined
list. The list can be maintained in Settings (F2).</string>
</property>
<property name="editable">
<bool>true</bool>
</property>
<property name="insertPolicy">
<enum>QComboBox::InsertAtBottom</enum>
</property>
</widget>
</item>
<item row="5" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QRadioButton" name="txrb5">
<property name="toolTip">
<string>Send this message in next Tx interval</string>
</property>
<property name="text">
<string/>
</property>
<property name="shortcut">
<string>Ctrl+5</string>
</property>
<attribute name="buttonGroup">
<string notr="true">buttonGroup</string>
</attribute>
</widget>
</item>
<item row="5" column="2">
<widget class="QPushButton" name="txb5">
<property name="toolTip">
<string>Switch to this Tx message NOW</string>
</property>
<property name="text">
<string>Tx &amp;5</string>
</property>
<property name="shortcut">
<string>Alt+5</string>
</property>
</widget>
</item>
<item row="6" column="0">
<widget class="QLineEdit" name="tx6">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="text">
<string/>
</property>
</widget>
</item>
<item row="6" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QRadioButton" name="txrb6">
<property name="toolTip">
<string>Send this message in next Tx interval</string>
</property>
<property name="text">
<string/>
</property>
<property name="shortcut">
<string>Ctrl+6</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
<attribute name="buttonGroup">
<string notr="true">buttonGroup</string>
</attribute>
</widget>
</item>
<item row="6" column="2">
<widget class="QPushButton" name="txb6">
<property name="toolTip">
<string>Switch to this Tx message NOW</string>
</property>
<property name="text">
<string>Tx &amp;6</string>
</property>
<property name="shortcut">
<string>Alt+6</string>
</property>
</widget>
</item>
</layout>
</widget>
<widget class="QWidget" name="tab_2">
<attribute name="title">
<string>2</string>
</attribute>
<layout class="QVBoxLayout" name="verticalLayout_4">
<property name="leftMargin">
<number>6</number>
</property>
<property name="topMargin">
<number>6</number>
</property>
<property name="rightMargin">
<number>6</number>
</property>
<property name="bottomMargin">
<number>6</number>
</property>
<item>
<layout class="QGridLayout" name="gridLayout_4">
<property name="spacing">
<number>2</number>
</property>
<item row="0" column="0">
<widget class="QLabel" name="label_9">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Preferred">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="minimumSize">
<size>
<width>0</width>
<height>30</height>
</size>
</property>
<property name="maximumSize">
<size>
<width>16777215</width>
<height>30</height>
</size>
</property>
<property name="text">
<string>Calling CQ </string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="1" column="0">
<widget class="QPushButton" name="pbCallCQ">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Generate a CQ message</string>
</property>
<property name="text">
<string>CQ</string>
</property>
</widget>
</item>
<item row="3" column="0">
<widget class="QPushButton" name="pbSendRRR">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Generate message with RRR</string>
</property>
<property name="text">
<string>RRR</string>
</property>
</widget>
</item>
<item row="2" column="0">
<widget class="QPushButton" name="pbAnswerCaller">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Generate message with report</string>
</property>
<property name="text">
<string>dB</string>
</property>
</widget>
</item>
<item row="0" column="1">
<widget class="QLabel" name="label_10">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Preferred">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="minimumSize">
<size>
<width>0</width>
<height>30</height>
</size>
</property>
<property name="maximumSize">
<size>
<width>16777215</width>
<height>30</height>
</size>
</property>
<property name="text">
<string>Answering CQ</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="1" column="1">
<widget class="QPushButton" name="pbAnswerCQ">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Generate message for replying to a CQ</string>
</property>
<property name="text">
<string>Grid</string>
</property>
</widget>
</item>
<item row="2" column="1">
<widget class="QPushButton" name="pbSendReport">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Generate message with R+report</string>
</property>
<property name="text">
<string>R+dB</string>
</property>
</widget>
</item>
<item row="3" column="1">
<widget class="QPushButton" name="pbSend73">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>2</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Generate message with 73</string>
</property>
<property name="text">
<string>73</string>
</property>
</widget>
</item>
</layout>
</item>
<item>
<layout class="QHBoxLayout" name="horizontalLayout_3">
<item>
<widget class="QLineEdit" name="genMsg">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Fixed">
<horstretch>3</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
</widget>
</item>
<item>
<widget class="QRadioButton" name="rbGenMsg">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>1</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="minimumSize">
<size>
<width>0</width>
<height>26</height>
</size>
</property>
<property name="toolTip">
<string>Send this standard (generated) message</string>
</property>
<property name="text">
<string>Gen msg</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
</widget>
</item>
</layout>
</item>
<item>
<layout class="QHBoxLayout" name="horizontalLayout">
<item>
<widget class="QComboBox" name="freeTextMsg">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Fixed">
<horstretch>3</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="minimumSize">
<size>
<width>150</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Enter a free text message (maximum 13 characters)
or select a predefined macro from the dropdown list.
Press ENTER to add the current text to the predefined
list. The list can be maintained in Settings (F2).</string>
</property>
<property name="editable">
<bool>true</bool>
</property>
<property name="insertPolicy">
<enum>QComboBox::InsertAtBottom</enum>
</property>
</widget>
</item>
<item>
<widget class="QRadioButton" name="rbFreeText">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>1</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="toolTip">
<string>Send this free-text message (max 13 characters)</string>
</property>
<property name="text">
<string>Free msg</string>
</property>
</widget>
</item>
</layout>
</item>
</layout>
</widget>
</widget>
</item>
</layout>
</widget>
</item>
</layout>
</widget>
<widget class="QWidget" name="page_2">
<layout class="QVBoxLayout" name="verticalLayout_5">
<property name="leftMargin">
<number>0</number>
</property>
<property name="topMargin">
<number>0</number>
</property>
<property name="rightMargin">
<number>0</number>
</property>
<property name="bottomMargin">
<number>0</number>
</property>
<item>
<spacer name="verticalSpacer_3">
<property name="orientation">
<enum>Qt::Vertical</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>20</width>
<height>40</height>
</size>
</property>
</spacer>
</item>
<item>
<widget class="QWidget" name="widget_2" native="true">
<layout class="QHBoxLayout" name="horizontalLayout_9">
<property name="leftMargin">
<number>0</number>
</property>
<property name="topMargin">
<number>0</number>
</property>
<property name="rightMargin">
<number>0</number>
</property>
<property name="bottomMargin">
<number>0</number>
</property>
<item>
<widget class="QWidget" name="WSPR_controls_widget" native="true">
<layout class="QGridLayout" name="gridLayout_7">
<property name="leftMargin">
<number>0</number>
</property>
<property name="topMargin">
<number>0</number>
</property>
<property name="rightMargin">
<number>0</number>
</property>
<property name="bottomMargin">
<number>0</number>
</property>
<item row="2" column="1">
<widget class="QGroupBox" name="band_hopping_group_box">
<property name="title">
<string>Band Hopping</string>
</property>
<property name="checkable">
<bool>true</bool>
</property>
<layout class="QHBoxLayout" name="horizontalLayout_7">
<item>
<widget class="QPushButton" name="band_hopping_schedule_push_button">
<property name="toolTip">
<string>Choose bands and times of day for band-hopping.</string>
</property>
<property name="text">
<string>Schedule ...</string>
</property>
</widget>
</item>
</layout>
</widget>
</item>
<item row="0" column="3">
<spacer name="horizontalSpacer_2">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>40</width>
<height>20</height>
</size>
</property>
</spacer>
</item>
<item row="0" column="2">
<widget class="QCheckBox" name="cbUploadWSPR_Spots">
<property name="toolTip">
Fix minor typo and remove potentially non-portable UI size constraints git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6632 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-23 07:22:48 -04:00
<string>Upload decoded messages to WSPRnet.org.</string>
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
</property>
<property name="text">
<string>Upload spots</string>
</property>
</widget>
</item>
<item row="0" column="1">
<widget class="QSpinBox" name="WSPRfreqSpinBox">
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="suffix">
<string> Hz</string>
</property>
<property name="prefix">
<string>Tx </string>
</property>
<property name="minimum">
<number>1400</number>
</property>
<property name="maximum">
<number>1600</number>
</property>
<property name="value">
<number>1500</number>
</property>
</widget>
</item>
<item row="1" column="2">
<widget class="QPushButton" name="pbTxNext">
<property name="toolTip">
<string>Transmit during the next 2-minute sequence.</string>
</property>
<property name="styleSheet">
<string notr="true">QPushButton:checked {
background-color: red;
border-style: outset;
border-width: 1px;
border-radius: 5px;
border-color: black;
min-width: 5em;
padding: 3px;
}</string>
</property>
<property name="text">
<string>Tx Next</string>
</property>
<property name="checkable">
<bool>true</bool>
</property>
</widget>
</item>
<item row="2" column="2">
<widget class="QComboBox" name="TxPowerComboBox">
<property name="toolTip">
<string>Set Tx power in dBm (dB above 1 mW) as part of your WSPR message.</string>
</property>
</widget>
</item>
<item row="0" column="0">
<spacer name="horizontalSpacer_3">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>40</width>
<height>20</height>
</size>
</property>
</spacer>
</item>
<item row="1" column="1">
<widget class="QSpinBox" name="sbTxPercent">
<property name="toolTip">
<string>Percentage of 2-minute sequences devoted to transmitting.</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="suffix">
<string> %</string>
</property>
<property name="prefix">
<string>Tx Pct </string>
</property>
<property name="maximum">
<number>100</number>
</property>
</widget>
</item>
</layout>
</widget>
</item>
</layout>
</widget>
</item>
<item>
<spacer name="verticalSpacer_2">
<property name="orientation">
<enum>Qt::Vertical</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>20</width>
<height>40</height>
</size>
</property>
</spacer>
</item>
</layout>
</widget>
</widget>
</item>
<item row="1" column="2">
<widget class="QWidget" name="DX_controls_widget" native="true">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<layout class="QGridLayout" name="gridLayout_2">
<property name="leftMargin">
<number>0</number>
</property>
<property name="topMargin">
<number>0</number>
</property>
<property name="rightMargin">
<number>0</number>
</property>
<property name="bottomMargin">
<number>0</number>
</property>
<item row="0" column="0">
<widget class="QLabel" name="label_3">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="palette">
<palette>
<active>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
</active>
<inactive>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
</inactive>
<disabled>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
</disabled>
</palette>
</property>
<property name="autoFillBackground">
<bool>true</bool>
</property>
<property name="text">
<string>DX Call</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="margin">
<number>5</number>
</property>
<property name="indent">
<number>2</number>
</property>
</widget>
</item>
<item row="0" column="1">
<widget class="QLabel" name="label_4">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="palette">
<palette>
<active>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
</active>
<inactive>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>252</red>
<green>252</green>
<blue>252</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
</inactive>
<disabled>
<colorrole role="Base">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
<colorrole role="Window">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>175</green>
<blue>213</blue>
</color>
</brush>
</colorrole>
</disabled>
</palette>
</property>
<property name="autoFillBackground">
<bool>true</bool>
</property>
<property name="text">
<string>DX Grid</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="margin">
<number>5</number>
</property>
<property name="indent">
<number>2</number>
</property>
</widget>
</item>
<item row="1" column="0">
<widget class="QLineEdit" name="dxCallEntry">
<property name="toolTip">
<string>Callsign of station to be worked</string>
</property>
<property name="text">
<string/>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="1" column="1">
<widget class="QLineEdit" name="dxGridEntry">
<property name="toolTip">
<string>Locator of station to be worked</string>
</property>
<property name="text">
<string/>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="2" column="0">
<widget class="QLabel" name="labAz">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="autoFillBackground">
<bool>true</bool>
</property>
<property name="text">
<string/>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="indent">
<number>4</number>
</property>
</widget>
</item>
<item row="2" column="1">
<widget class="QLabel" name="labDist">
<property name="sizePolicy">
<sizepolicy hsizetype="Preferred" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="text">
<string/>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
</widget>
</item>
<item row="3" column="0">
<widget class="QPushButton" name="lookupButton">
<property name="toolTip">
<string>Search for callsign in database</string>
</property>
<property name="text">
<string>&amp;Lookup</string>
</property>
</widget>
</item>
<item row="3" column="1">
<widget class="QPushButton" name="addButton">
<property name="toolTip">
<string>Add callsign and locator to database</string>
</property>
<property name="text">
<string>Add</string>
</property>
</widget>
</item>
</layout>
</widget>
</item>
<item row="1" column="1" rowspan="2">
<widget class="QSlider" name="inGain">
<property name="toolTip">
<string>Digital gain for audio input</string>
</property>
<property name="minimum">
<number>-50</number>
</property>
<property name="maximum">
<number>50</number>
</property>
<property name="value">
<number>20</number>
</property>
<property name="tickPosition">
<enum>QSlider::TicksBelow</enum>
</property>
<property name="tickInterval">
<number>10</number>
</property>
</widget>
</item>
<item row="1" column="0" rowspan="2">
<widget class="SignalMeter" name="signal_meter_widget">
<property name="sizePolicy">
<sizepolicy hsizetype="MinimumExpanding" vsizetype="MinimumExpanding">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="frameShape">
<enum>QFrame::Panel</enum>
</property>
<property name="frameShadow">
<enum>QFrame::Sunken</enum>
</property>
</widget>
</item>
<item row="1" column="4" rowspan="2">
<widget class="QSlider" name="outAttenuation">
<property name="toolTip">
<string>Adjust Tx audio level</string>
</property>
<property name="maximum">
<number>450</number>
</property>
<property name="value">
<number>0</number>
</property>
<property name="orientation">
<enum>Qt::Vertical</enum>
</property>
<property name="invertedAppearance">
<bool>true</bool>
</property>
<property name="invertedControls">
<bool>true</bool>
</property>
<property name="tickPosition">
<enum>QSlider::TicksBelow</enum>
</property>
<property name="tickInterval">
<number>50</number>
</property>
</widget>
</item>
<item row="2" column="2">
<widget class="QLabel" name="labUTC">
<property name="sizePolicy">
<sizepolicy hsizetype="Minimum" vsizetype="Fixed">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="styleSheet">
<string notr="true">QLabel {
font-family: MS Shell Dlg 2;
font-size: 16pt;
background-color : black;
color : yellow;
}</string>
</property>
<property name="frameShape">
<enum>QFrame::StyledPanel</enum>
</property>
<property name="frameShadow">
<enum>QFrame::Sunken</enum>
</property>
<property name="lineWidth">
<number>2</number>
</property>
<property name="midLineWidth">
<number>0</number>
</property>
<property name="text">
<string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p align=&quot;center&quot;&gt; 2015 Jun 17 &lt;/p&gt;&lt;p align=&quot;center&quot;&gt; 01:23:45 &lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
</property>
<property name="alignment">
<set>Qt::AlignCenter</set>
</property>
<property name="margin">
<number>5</number>
</property>
</widget>
</item>
<item row="0" column="4">
<widget class="QLabel" name="label">
<property name="text">
<string> Pwr</string>
</property>
</widget>
</item>
<item row="0" column="1" alignment="Qt::AlignHCenter|Qt::AlignVCenter">
<widget class="QPushButton" name="readFreq">
<property name="enabled">
<bool>false</bool>
</property>
<property name="toolTip">
<string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;If orange or red there has been a rig control failure, click to reset and read the dial frequency.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
</property>
<property name="styleSheet">
<string notr="true">QPushButton {
font-family: helvetica;
font-size: 9pt;
font-weight: bold;
background-color: white;
color: black;
border-style: solid;
border-width:1px;
border-radius:10px;
border-color: gray;
max-width:20px;
max-height:20px;
min-width:20px;
min-height:20px;
}
QPushButton[state=&quot;error&quot;] {
background-color: red;
}
QPushButton[state=&quot;warning&quot;] {
background-color: orange;
}
QPushButton[state=&quot;ok&quot;] {
background-color: #00ff00;
}</string>
</property>
<property name="text">
<string>?</string>
</property>
</widget>
</item>
<item row="0" column="0">
<widget class="QComboBox" name="bandComboBox">
<property name="toolTip">
<string>Select operating band or frequency in MHz</string>
</property>
<property name="editable">
<bool>true</bool>
</property>
<property name="insertPolicy">
<enum>QComboBox::NoInsert</enum>
</property>
<property name="sizeAdjustPolicy">
<enum>QComboBox::AdjustToMinimumContentsLength</enum>
</property>
</widget>
</item>
</layout>
</item>
</layout>
</item>
</layout>
</widget>
<widget class="QMenuBar" name="menuBar">
<widget class="QMenu" name="menuFile">
<property name="title">
<string>File</string>
</property>
<addaction name="actionOpen"/>
<addaction name="actionOpen_next_in_directory"/>
<addaction name="actionDecode_remaining_files_in_directory"/>
<addaction name="separator"/>
<addaction name="actionSave_reference_spectrum"/>
<addaction name="separator"/>
<addaction name="actionDelete_all_wav_files_in_SaveDir"/>
<addaction name="actionErase_ALL_TXT"/>
<addaction name="actionErase_wsjtx_log_adi"/>
<addaction name="actionOpen_log_directory"/>
<addaction name="separator"/>
<addaction name="actionSettings"/>
<addaction name="separator"/>
<addaction name="actionExit"/>
</widget>
<widget class="QMenu" name="menuView">
<property name="title">
<string>View</string>
</property>
<addaction name="actionWide_Waterfall"/>
<addaction name="actionAstronomical_data"/>
<addaction name="actionMessage_averaging"/>
<addaction name="actionEcho_Graph"/>
<addaction name="actionFast_Graph"/>
</widget>
<widget class="QMenu" name="menuDecode">
<property name="title">
<string>Decode</string>
</property>
<addaction name="actionQuickDecode"/>
<addaction name="actionMediumDecode"/>
<addaction name="actionDeepestDecode"/>
<addaction name="separator"/>
<addaction name="actionInclude_averaging"/>
<addaction name="actionInclude_correlation"/>
</widget>
<widget class="QMenu" name="menuSave">
<property name="title">
<string>Save</string>
</property>
<addaction name="actionNone"/>
<addaction name="actionSave_decoded"/>
<addaction name="actionSave_all"/>
</widget>
<widget class="QMenu" name="menuHelp">
<property name="title">
<string>Help</string>
</property>
<addaction name="actionOnline_User_Guide"/>
<addaction name="actionLocal_User_Guide"/>
<addaction name="download_samples_action"/>
<addaction name="separator"/>
<addaction name="actionKeyboard_shortcuts"/>
<addaction name="actionSpecial_mouse_commands"/>
<addaction name="actionShort_list_of_add_on_prefixes_and_suffixes"/>
<addaction name="separator"/>
<addaction name="actionAbout"/>
</widget>
<widget class="QMenu" name="menuMode">
<property name="title">
<string>Mode</string>
</property>
<addaction name="actionJT9"/>
<addaction name="actionJT65"/>
<addaction name="actionJT9_JT65"/>
<addaction name="actionJT4"/>
<addaction name="actionWSPR_2"/>
<addaction name="actionWSPR_15"/>
<addaction name="actionEcho"/>
<addaction name="separator"/>
<addaction name="actionISCAT"/>
<addaction name="actionJTMSK"/>
Install MSK144 as a new mode. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6721 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-03 11:45:54 -04:00
<addaction name="actionMSK144"/>
Many renames: QRA65 --> QRA64, QRA02 --> QRA64. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 08:15:41 -04:00
<addaction name="actionQRA64"/>
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
</widget>
Add multiple configurations navigation and management Multiple configurations are accessed and maintained from a new main window menu bar pop up menu "Configurations". The prior settings are the "Default" entry. New configurations may be added by cloning existing ones. Maintenance and navigation is via sub menus for each configuration. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-17 19:39:12 -04:00
<widget class="QMenu" name="menuConfig">
<property name="title">
<string>Configurations</string>
</property>
</widget>
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
<addaction name="menuFile"/>
Add multiple configurations navigation and management Multiple configurations are accessed and maintained from a new main window menu bar pop up menu "Configurations". The prior settings are the "Default" entry. New configurations may be added by cloning existing ones. Maintenance and navigation is via sub menus for each configuration. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-17 19:39:12 -04:00
<addaction name="menuConfig"/>
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
<addaction name="menuView"/>
<addaction name="menuMode"/>
<addaction name="menuDecode"/>
<addaction name="menuSave"/>
<addaction name="menuHelp"/>
</widget>
<widget class="QStatusBar" name="statusBar"/>
<action name="actionExit">
<property name="text">
<string>Exit</string>
</property>
<property name="menuRole">
<enum>QAction::QuitRole</enum>
</property>
</action>
<action name="actionDeviceSetup">
<property name="checkable">
<bool>false</bool>
</property>
<property name="text">
<string>Configuration</string>
</property>
<property name="shortcut">
<string>F2</string>
</property>
</action>
<action name="actionAbout">
<property name="text">
<string>About WSJT-X</string>
</property>
<property name="shortcut">
<string>Ctrl+F1</string>
</property>
</action>
<action name="actionWide_Waterfall">
<property name="text">
<string>Waterfall</string>
</property>
</action>
<action name="actionOpen">
<property name="text">
<string>Open</string>
</property>
<property name="shortcut">
<string>Ctrl+O</string>
</property>
</action>
<action name="actionOpen_next_in_directory">
<property name="text">
<string>Open next in directory</string>
</property>
<property name="shortcut">
<string>F6</string>
</property>
</action>
<action name="actionDecode_remaining_files_in_directory">
<property name="text">
<string>Decode remaining files in directory</string>
</property>
<property name="shortcut">
<string>Shift+F6</string>
</property>
</action>
<action name="actionDelete_all_wav_files_in_SaveDir">
<property name="text">
<string>Delete all *.wav &amp;&amp; *.c2 files in SaveDir</string>
</property>
</action>
<action name="actionQuickDecode">
<property name="checkable">
<bool>true</bool>
</property>
<property name="checked">
<bool>false</bool>
</property>
<property name="text">
<string>Fast</string>
</property>
</action>
<action name="actionNone">
<property name="checkable">
<bool>true</bool>
</property>
<property name="checked">
<bool>true</bool>
</property>
<property name="text">
<string>None</string>
</property>
</action>
<action name="actionSave_all">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Save all</string>
</property>
</action>
<action name="actionOnline_User_Guide">
<property name="text">
<string>Online User Guide</string>
</property>
<property name="shortcut">
<string>F1</string>
</property>
</action>
<action name="actionKeyboard_shortcuts">
<property name="text">
<string>Keyboard shortcuts</string>
</property>
<property name="shortcut">
<string>F3</string>
</property>
</action>
<action name="actionSpecial_mouse_commands">
<property name="text">
<string>Special mouse commands</string>
</property>
<property name="shortcut">
<string>F5</string>
</property>
</action>
<action name="actionJT9">
<property name="checkable">
<bool>true</bool>
</property>
<property name="checked">
<bool>true</bool>
</property>
<property name="text">
<string>JT9</string>
</property>
</action>
<action name="actionSave_decoded">
<property name="checkable">
<bool>true</bool>
</property>
<property name="enabled">
<bool>true</bool>
</property>
<property name="text">
<string>Save decoded</string>
</property>
</action>
<action name="actionMediumDecode">
<property name="checkable">
<bool>true</bool>
</property>
<property name="checked">
<bool>false</bool>
</property>
<property name="text">
<string>Normal</string>
</property>
</action>
<action name="actionDeepestDecode">
<property name="checkable">
<bool>true</bool>
</property>
<property name="checked">
<bool>true</bool>
</property>
<property name="text">
<string>Deep</string>
</property>
</action>
<action name="actionMonitor_OFF_at_startup">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Monitor OFF at startup</string>
</property>
</action>
<action name="actionErase_ALL_TXT">
<property name="text">
<string>Erase ALL.TXT</string>
</property>
</action>
<action name="actionErase_wsjtx_log_adi">
<property name="text">
<string>Erase wsjtx_log.adi</string>
</property>
</action>
<action name="actionConvert_JT9_x_to_RTTY">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Convert mode to RTTY for logging</string>
</property>
</action>
<action name="actionLog_dB_reports_to_Comments">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Log dB reports to Comments</string>
</property>
</action>
<action name="actionPrompt_to_log_QSO">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Prompt me to log QSO</string>
</property>
</action>
<action name="actionBlank_line_between_decoding_periods">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Blank line between decoding periods</string>
</property>
</action>
<action name="actionClear_DX_Call_and_Grid_after_logging">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Clear DX Call and Grid after logging</string>
</property>
</action>
<action name="actionDisplay_distance_in_miles">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Display distance in miles</string>
</property>
</action>
<action name="actionDouble_click_on_call_sets_Tx_Enable">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Double-click on call sets Tx Enable</string>
</property>
<property name="shortcut">
<string>F7</string>
</property>
</action>
<action name="action_73TxDisable">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Tx disabled after sending 73</string>
</property>
</action>
<action name="actionRunaway_Tx_watchdog">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Runaway Tx watchdog</string>
</property>
</action>
<action name="actionAllow_multiple_instances">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Allow multiple instances</string>
</property>
</action>
<action name="actionLockTxFreq">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Tx freq locked to Rx freq</string>
</property>
</action>
<action name="actionJT65">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>JT65</string>
</property>
</action>
<action name="actionJT9_JT65">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>JT9+JT65</string>
</property>
</action>
<action name="actionTx2QSO">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Tx messages to Rx Frequency window</string>
</property>
</action>
<action name="actionGray1">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Gray1</string>
</property>
</action>
<action name="actionEnable_DXCC_entity">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Show DXCC entity and worked B4 status</string>
</property>
</action>
<action name="actionAstronomical_data">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Astronomical data</string>
</property>
</action>
<action name="actionShort_list_of_add_on_prefixes_and_suffixes">
<property name="text">
<string>Short list of add-on prefixes and suffixes</string>
</property>
</action>
<action name="actionSettings">
<property name="text">
<string>Settings...</string>
</property>
<property name="shortcut">
<string>F2</string>
</property>
</action>
<action name="actionLocal_User_Guide">
<property name="text">
<string>Local User Guide</string>
</property>
</action>
<action name="actionOpen_log_directory">
<property name="text">
<string>Open log directory</string>
</property>
</action>
<action name="actionJT4">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>JT4</string>
</property>
</action>
<action name="actionMessage_averaging">
<property name="text">
<string>Message averaging</string>
</property>
<property name="shortcut">
<string>F7</string>
</property>
</action>
<action name="actionInclude_averaging">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Enable averaging</string>
</property>
</action>
<action name="actionInclude_correlation">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Enable deep search</string>
</property>
</action>
<action name="actionWSPR_2">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>WSPR-2</string>
</property>
</action>
<action name="actionWSPR_15">
<property name="checkable">
<bool>true</bool>
</property>
<property name="enabled">
<bool>false</bool>
</property>
<property name="text">
<string>WSPR-15</string>
</property>
</action>
<action name="actionEcho_Graph">
<property name="text">
<string>Echo Graph</string>
</property>
<property name="shortcut">
<string>F8</string>
</property>
</action>
<action name="actionEcho">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>Echo</string>
</property>
<property name="toolTip">
<string>EME Echo mode</string>
</property>
</action>
<action name="actionISCAT">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>ISCAT</string>
</property>
</action>
<action name="actionFast_Graph">
<property name="text">
<string>Fast Graph</string>
</property>
<property name="shortcut">
<string>F9</string>
</property>
</action>
<action name="actionSave_reference_spectrum">
<property name="text">
Starting to implement accumulation of reference spectrum. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6598 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-07 16:02:32 -04:00
<string>Measure reference spectrum</string>
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
</property>
</action>
<action name="actionJTMSK">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>JTMSK</string>
</property>
</action>
<action name="download_samples_action">
<property name="text">
<string>&amp;Download Samples ...</string>
</property>
<property name="whatsThis">
<string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Download sample audio files demonstrating the various modes.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
</property>
</action>
Install MSK144 as a new mode. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6721 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-03 11:45:54 -04:00
<action name="actionMSK144">
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
<string>MSK144</string>
</property>
</action>
Many renames: QRA65 --> QRA64, QRA02 --> QRA64. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 08:15:41 -04:00
<action name="actionQRA64">
Starting to implement the hooks for interfacing to QRA mode. Pass file path for peg-128 files to fast_decode(). (Inelegant, but it works.) git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-08 17:20:58 -04:00
<property name="checkable">
<bool>true</bool>
</property>
<property name="text">
Many renames: QRA65 --> QRA64, QRA02 --> QRA64. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 08:15:41 -04:00
<string>QRA64</string>
Starting to implement the hooks for interfacing to QRA mode. Pass file path for peg-128 files to fast_decode(). (Inelegant, but it works.) git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-08 17:20:58 -04:00
</property>
</action>
Rig control overhaul to implement generic Doppler shift tracking The concept of a nominal receive and transmit frequency has been introduced. This is used as a base frequency for Doppler correction, frequency setting and reporting. The start up frequency is now zero which is updated by the first rig control status report. This needs more work to accommodate calling frequency plus working frequency operation as is used for random MS operation etc.. The main window frequency display now shows the transmit dial frequency while transmitting. The mode changing logic sequence has been changed such that the rig is correctly put into and taken out of split mode as required by the target mode. This also avoids the "other" VFO having its frequency changed when entering a mode that does not use split operating like WSPR. The main window band combo box edit may now be used to input an kHz offset from the current MHz dial frequency. This is intended for setting a sked or working frequency on the VHF and up bands. For example the working frequency for 23cms might be set to 1296MHz and a working frequency of 1296.3MHz would be selected by selecting the 23cms band with the combo box drop down list and then entering 300k into the band combo box edit widget. When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal frequency such that the frequency clicked on becomes the Tx and Rx frequency using the fixed 1000Hz DF that JT4 modes use. This will probably be extended to all QSO modes when used in VHF & up mode. This assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore one can "net" to an off frequency, but visible on the waterfall, caller with one click. Improvements to OmniRig rig control including use of the serial port control lines RTS or DTR, on the CAT serial port used by OmniRig, for PTT control. Incrementing transaction sequence numbers added to messages to and from the rig control thread. This enables round trip status to be tracked and associated with a request. For example a command that might cause several asynchronous status updates can now be tracked in the originating thread such that it is clear which updates are caused by executing the request. This in turn allows updates to be held until the request is complete i.e. the state is consistent with the results of the request. Messages to the rig control thread are now posted as a new state (Transceiver::TransceiverState) object. The rig control thread tracks requests and actions any differences between the prior requests and the new state. The rig control thread is now stored on the heap so that it can be closed down and released as needed. Along with this the rig control close down semantics are better defined avoiding some potential deadlock situations. If the rig is placed into split mode it will be reverted to simplex mode when the rig connection is closed. When using direct rig control via Hamlib, rigs that have A/B VFO arrangements and no method to query the current VFO like many Icoms and the Yaesu FT-817/857/897(D) series now have smarted frequency updating requiring no VFO changes when changing the frequency. This is particularly important when doing Tx Doppler correction to avoid glitches. The implementation of emulated split operating mode ("Fake It") is simplified and improved. A dummy Hamlib transceiver for PTT control on a separate port is no long instantiated if CAT or VOX PTT control is selected. The resolution and any rounding of the rig CAT frequency set and get commands is determined automatically upon opening the rig connection. This is needed to determine the rate of frequency updates for Doppler tracking. It also allows the rig to be more accurately controlled. Frequency calibration is calculated separately for the receive and transmit frequencies. Whether the rig modulation mode should be controlled is now a constructor argument rather than being passed with individual rig control requests. Doppler shift correction is considerably enhanced with simpler controls and much better rig control. A new mode of tracking called "receive only" is introduced for those with rigs that cannot be QSY:ed via CAT when transmitting. Such rigs have a Doppler correction calculated for the middle of the next transmit period just before transmission starts. While using Doppler tracking it is now possible to adjust the sked frequency either using the new kHz offset feature of the main window band combo box or by directly tuning the rig VFO knob while holding down the CTRL key. The astronomical data window that includes Doppler tracking control is now opened and closed using a checkable menu item to avoid it being accidentally closed. Debug configuration rig control diagnostic messages now have a facility argument for clearer and more standardized trace messages. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 13:11:58 -04:00
</widget>
<layoutdefault spacing="6" margin="11"/>
<customwidgets>
<customwidget>
<class>DisplayText</class>
<extends>QTextEdit</extends>
<header>displaytext.h</header>
</customwidget>
<customwidget>
<class>LettersSpinBox</class>
<extends>QSpinBox</extends>
<header>LettersSpinBox.hpp</header>
</customwidget>
<customwidget>
<class>SignalMeter</class>
<extends>QFrame</extends>
<header>signalmeter.h</header>
<container>1</container>
</customwidget>
</customwidgets>
<tabstops>
<tabstop>logQSOButton</tabstop>
<tabstop>stopButton</tabstop>
<tabstop>monitorButton</tabstop>
<tabstop>EraseButton</tabstop>
<tabstop>DecodeButton</tabstop>
<tabstop>autoButton</tabstop>
<tabstop>stopTxButton</tabstop>
<tabstop>tuneButton</tabstop>
<tabstop>bandComboBox</tabstop>
<tabstop>inGain</tabstop>
<tabstop>txFirstCheckBox</tabstop>
<tabstop>TxFreqSpinBox</tabstop>
<tabstop>rptSpinBox</tabstop>
<tabstop>genStdMsgsPushButton</tabstop>
<tabstop>tx1</tabstop>
<tabstop>tx2</tabstop>
<tabstop>tx3</tabstop>
<tabstop>tx4</tabstop>
<tabstop>tx6</tabstop>
<tabstop>txrb1</tabstop>
<tabstop>txrb2</tabstop>
<tabstop>txrb3</tabstop>
<tabstop>txrb4</tabstop>
<tabstop>txrb5</tabstop>
<tabstop>txrb6</tabstop>
<tabstop>txb1</tabstop>
<tabstop>txb2</tabstop>
<tabstop>txb3</tabstop>
<tabstop>txb4</tabstop>
<tabstop>txb5</tabstop>
<tabstop>txb6</tabstop>
<tabstop>genMsg</tabstop>
<tabstop>pbAnswerCaller</tabstop>
<tabstop>rbFreeText</tabstop>
<tabstop>pbSendRRR</tabstop>
<tabstop>pbAnswerCQ</tabstop>
<tabstop>pbSendReport</tabstop>
<tabstop>pbSend73</tabstop>
<tabstop>rbGenMsg</tabstop>
<tabstop>pbCallCQ</tabstop>
</tabstops>
<resources/>
<connections/>
<buttongroups>
<buttongroup name="buttonGroup">
<property name="exclusive">
<bool>true</bool>
</property>
</buttongroup>
</buttongroups>
</ui>
Reference in New Issue Copy Permalink