mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-09-19 19:56:33 -04:00
97 lines
3.8 KiB
Plaintext
97 lines
3.8 KiB
Plaintext
|
// Status=review
|
|||
|
|
.Wide Graph Settings:
|
|||
|
|
- Bins/Pixel = 7
|
|||
|
|
- Zero = -3
|
|||
|
|
- If necessary, adjust the width of the Wide Graph Window so that its upper
|
|||
|
|
frequency limit is 4000 Hz.
|
|||
|
|
|
|||
|
|
.Main Window:
|
|||
|
|
- Select JT9+JT65 on the Mode menu
|
|||
|
|
- Toggle the Tx mode button to read Tx JT65, and set the Tx and Rx
|
|||
|
|
frequencies to 1718 Hz.
|
|||
|
|
- Double-click on Erase to clear both text windows
|
|||
|
|
|
|||
|
|
.Open a Wave File:
|
|||
|
|
- Select File | Open and navigate to ...\save\samples\130610_2343.wav.
|
|||
|
|
|
|||
|
|
The waterfall should look like the figure below.
|
|||
|
|
|
|||
|
|
//.130610_2343.wav Decode
|
|||
|
|
[[X14]]
|
|||
|
|
image::images/130610_2343-wav-80.png[align="left",alt="Wide Graph Decode 130610_2343"]
|
|||
|
|
|
|||
|
|
This sample file contains 17 decodable signals — nine in JT65 mode
|
|||
|
|
(flagged with the character # in the decoded text windows), and eight
|
|||
|
|
in JT9 mode (flagged with @). Since the Tx mode was set to Tx JT65,
|
|||
|
|
signals in that mode were decoded first. If you had selected Tx JT9,
|
|||
|
|
JT9 signals would have been decoded first.
|
|||
|
|
|
|||
|
|
TIP: Notice the [blue]*BLUE* marker on the waterfall scale, by
|
|||
|
|
default set at 2500 Hz. Its position is set by the spinner control
|
|||
|
|
JT65 nnnn JT9, where nnnn is a frequency in Hz. In JT9+JT65 mode the
|
|||
|
|
program will decode JT65 signals below this frequency and JT9 signals
|
|||
|
|
above it.
|
|||
|
|
|
|||
|
|
- Confirm that mouse-click behavior is similar to that described
|
|||
|
|
<<X13,earlier>>. The program automatically determines the mode of each
|
|||
|
|
JT9 or JT65 signal.
|
|||
|
|
|
|||
|
|
- Double-click on the waterfall near 815 Hz: a JT65 message
|
|||
|
|
originating from W7VP will be decoded and appear in the Rx Frequency
|
|||
|
|
Box:
|
|||
|
|
|
|||
|
|
[width="70%",cols="3,^3,^3,^4,^4,30",options="header"]
|
|||
|
|
|=================================
|
|||
|
|
|UTC|db|dt|Freq|Mode|Message
|
|||
|
|
|2343|-7|0.3|815|#|KK4DSD W7VP -16
|
|||
|
|
|=================================
|
|||
|
|
|
|||
|
|
- Double-click on the waterfall at 3196 Hz and the program will decode a JT9
|
|||
|
|
message from IZ0MIT:
|
|||
|
|
|
|||
|
|
[width="70%",cols="3,^3,^3,^4,^4,30",options="header"]
|
|||
|
|
|=====================================
|
|||
|
|
|UTC|db|dt|Freq|Mode|Message
|
|||
|
|
|2343|-7|0.3|3196|@|WB8QPG IZ0MIT -11
|
|||
|
|
|=====================================
|
|||
|
|
|
|||
|
|
TIP: Notice that when a signal is decoded in this way, the Tx mode
|
|||
|
|
automatically switches to that of the decoded signal and the Rx and Tx
|
|||
|
|
frequency markers on the waterfall scale resize themselves
|
|||
|
|
accordingly.
|
|||
|
|
|
|||
|
|
- Scroll back in the Band Activity window and double-click on the
|
|||
|
|
message CQ DL7ACA JO40. The program will set Tx mode to JT65 and Tx
|
|||
|
|
and Rx frequencies to that of DL7ACA, 975 Hz. If you had checked
|
|||
|
|
*Double-click on call sets Tx Enable* on the Setup menu, the program
|
|||
|
|
would configure itself to start a QSO with DL7ACA.
|
|||
|
|
|
|||
|
|
- Double-click on the decoded JT65 message CQ TA4A KM37. The program
|
|||
|
|
will set Tx mode to JT9 and the Rx and Tx frequencies to 3567 Hz. The
|
|||
|
|
program is now configured properly for a JT9 QSO with TA4A.
|
|||
|
|
|
|||
|
|
IMPORTANT: Don’t forget to re-enter your own call-sign as “My Call”.
|
|||
|
|
|
|||
|
|
.Reopen the First Sample File:
|
|||
|
|
- Select File | Open and navigate to ...\save\samples\130418_1742.wav.
|
|||
|
|
|
|||
|
|
These data were recorded with a much narrower Rx bandwidth, roughly
|
|||
|
|
200 to 2600 Hz. If you have no Rx filter wider than about 2.7 kHz, you
|
|||
|
|
will be using data like this. For best viewing of such data adjust
|
|||
|
|
Bins/Pixel and the width of the Wide Graph so that only the active
|
|||
|
|
part of the spectrum shows, say 0 to 2600 Hz. Re-open the example
|
|||
|
|
file after any change of Bins/Pixel or Wide Graph width, to refresh
|
|||
|
|
the waterfall.
|
|||
|
|
|
|||
|
|
The signals in this file are all JT9 signals. To decode them in
|
|||
|
|
JT9+JT65 mode you’ll need to move the JT65 nnnn JT9 delimiter down to
|
|||
|
|
1000 Hz or less.
|
|||
|
|
|
|||
|
|
.Start, Zero, and Gain
|
|||
|
|
Now is a good time to experiment with the *Start*, *Zero*, and
|
|||
|
|
*Gain* parameters. *Start* sets the starting frequency at the left
|
|||
|
|
side of the waterfall scale. *Zero* sets the baseline level for
|
|||
|
|
colors, and *Gain* sets the sensitivity for color changes. For the
|
|||
|
|
receiver setup of this file good values are *Zero*=0, *Gain*=0.
|
|||
|
|
Re-open the wave file after each change, to see the new results.
|