WSJT-X/decodedtext.h

94 lines
2.3 KiB
C
Raw Normal View History

// -*- Mode: C++ -*-
/*
* Class to handle the formatted string as returned from the fortran decoder
*
* VK3ACF August 2013
*/
#ifndef DECODEDTEXT_H
#define DECODEDTEXT_H
#include <QString>
/*
0123456789012345678901234567890123456789
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
^ ^ ^ ^ ^ ^
2343 -11 0.8 1259 # YV6BFE F6GUU R-08
2343 -19 0.3 718 # VE6WQ SQ2NIJ -14
2343 -7 0.3 815 # KK4DSD W7VP -16
2343 -13 0.1 3627 @ CT1FBK IK5YZT R+02
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
0605 Tx 1259 # CQ VK3ACF QF22
*/
class DecodedText
{
public:
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
void operator=(const QString &rhs)
{
_string = rhs;
padding_ = _string.indexOf (" ") > 4 ? 2 : 0; // allow for seconds
};
void operator=(const QByteArray &rhs)
{
_string = rhs;
padding_ = _string.indexOf (" ") > 4 ? 2 : 0; // allow for seconds
};
void operator+=(const QString &rhs)
{
_string += rhs;
};
QString string() { return _string; };
int indexOf(QString s) { return _string.indexOf(s); };
int indexOf(QString s, int i) { return _string.indexOf(s,i); };
QString mid(int f, int t) { return _string.mid(f,t); };
QString left(int i) { return _string.left(i); };
void clear() { _string.clear(); };
QString CQersCall();
bool isJT65();
bool isJT9();
bool isTX();
bool isLowConfidence ();
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
int frequencyOffset(); // hertz offset from the tuned dial or rx frequency, aka audio frequency
int snr();
float dt();
// find and extract any report. Returns true if this is a standard message
bool report(QString const& myBaseCall, QString const& dxBaseCall, /*mod*/QString& report);
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
// get the first message text word, usually the call
QString call();
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
// get the second word, most likely the de call and the third word, most likely grid
void deCallAndGrid(/*out*/QString& call, QString& grid);
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
int timeInSeconds();
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
// returns a string of the SNR field with a leading + or - followed by two digits
QString report();
private:
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
// These define the columns in the decoded text where fields are to be found.
// We rely on these columns being the same in the fortran code (lib/decoder.f90) that formats the decoded text
enum Columns {column_time = 0,
column_snr = 5,
column_dt = 9,
column_freq = 14,
column_mode = 19,
column_qsoText = 22 };
QString _string;
int padding_;
};
#endif // DECODEDTEXT_H