WSJT-X/decodedtext.cpp

194 lines
4.9 KiB
C++
Raw Normal View History

#include "decodedtext.h"
#include <QStringList>
#include <QRegularExpression>
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
extern "C" {
bool stdmsg_(const char* msg, int len);
}
QString DecodedText::CQersCall()
{
// extract the CQer's call TODO: does this work with all call formats?
int s1 {0};
int position;
QString t=_string;
if ((position = _string.indexOf (" CQ DX ")) >= 0)
{
s1 = 7 + position;
}
else if ((position = _string.indexOf (" CQDX ")) >= 0)
{
s1 = 6 + position;
}
else if ((position = _string.indexOf (" CQ ")) >= 0)
{
s1 = 4 + position;
if(_string.mid(s1,3).toInt() > 0 and _string.mid(s1,3).toInt() <= 999) s1 += 4;
}
else if ((position = _string.indexOf (" DE ")) >= 0)
{
s1 = 4 + position;
}
else if ((position = _string.indexOf (" QRZ ")) >= 0)
{
s1 = 5 + position;
}
auto s2 = _string.indexOf (" ", s1);
return _string.mid (s1, s2 - s1);
}
bool DecodedText::isJT65()
{
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
return _string.indexOf("#") == column_mode + padding_;
}
bool DecodedText::isJT9()
{
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
return _string.indexOf("@") == column_mode + padding_;
}
bool DecodedText::isTX()
{
int i = _string.indexOf("Tx");
return (i >= 0 && i < 15); // TODO guessing those numbers. Does Tx ever move?
}
int DecodedText::frequencyOffset()
{
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
return _string.mid(column_freq + padding_,4).toInt();
}
int DecodedText::snr()
{
int i1=_string.indexOf(" ")+1;
return _string.mid(i1,3).toInt();
}
float DecodedText::dt()
{
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
return _string.mid(column_dt + padding_,5).toFloat();
}
/*
2343 -11 0.8 1259 # YV6BFE F6GUU R-08
2343 -19 0.3 718 # VE6WQ SQ2NIJ -14
2343 -7 0.3 815 # KK4DSD W7VP -16
2343 -13 0.1 3627 @ CT1FBK IK5YZT R+02
0605 Tx 1259 # CQ VK3ACF QF22
*/
// find and extract any report. Returns true if this is a standard message
bool DecodedText::report(QString const& myBaseCall, QString const& dxBaseCall, /*mod*/QString& report)
{
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
QString msg=_string.mid(column_qsoText + padding_).trimmed();
if(msg.length() < 1) return false;
msg = msg.left (22).remove (QRegularExpression {"[<>]"});
int i1=msg.indexOf('\r');
if (i1>0)
msg=msg.left (i1-1);
bool b = stdmsg_ ((msg + " ").toLatin1().constData(),22); // stdmsg is a fortran routine that packs the text, unpacks it and compares the result
QStringList w=msg.split(" ",QString::SkipEmptyParts);
if(w.size ()
&& b && (w[0] == myBaseCall
|| w[0].endsWith ("/" + myBaseCall)
|| w[0].startsWith (myBaseCall + "/")
|| (w.size () > 1 && !dxBaseCall.isEmpty ()
&& (w[1] == dxBaseCall
|| w[1].endsWith ("/" + dxBaseCall)
|| w[1].startsWith (dxBaseCall + "/")))))
{
QString tt="";
if(w.size() > 2) tt=w[2];
bool ok;
i1=tt.toInt(&ok);
if (ok and i1>=-50 and i1<50)
{
report = tt;
}
else
{
if (tt.mid(0,1)=="R")
{
i1=tt.mid(1).toInt(&ok);
if(ok and i1>=-50 and i1<50)
{
report = tt.mid(1);
}
}
}
}
return b;
}
// get the first text word, usually the call
QString DecodedText::call()
{
auto call = _string;
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
call = call.replace (QRegularExpression {" CQ ([A-Z]{2,2}|[0-9]{3,3}) "}, " CQ_\\1 ").mid (column_qsoText + padding_);
int i = call.indexOf(" ");
return call.mid(0,i);
}
// get the second word, most likely the de call and the third word, most likely grid
void DecodedText::deCallAndGrid(/*out*/QString& call, QString& grid)
{
auto msg = _string;
if(msg.mid(4,1)!=" ") msg=msg.mid(0,4)+msg.mid(6,-1); //Remove seconds from UTC
Add the option to ALT+click a decoded CQ or QRZ message which only moves the Rx frequency to theirs, this facilitates calling a station who is busy and may have many callers on their frequency. Updated the corresponding mouse shortcuts help text. Allow for times with seconds when parsing fast mode and FT8 decodes. Exclude the RR73 grid square from and grid validation or matching, it is not a grid square any more as far as WSJT-X is concerned, it is an RRR substitute. Add a simple state machine for QSO progress such that replies and auto-sequencing can be better controlled. Get compound callsign edge cases working again and allow QSOs from and to compound callsign holders working in as many situations as possible including auto-sequencing and FT8 auto-reply mode. This does mean that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx frequency will be taken as a reply to a CQ call despite it not being explicitly addressed back to the CQ caller. Compound callsigns should work in MSK144 contest mode also as well as in short code modes with some minor restrictions (short codes will not be used where configuration demands that a message be used to send a full compound callsign). Auto sequencing has been made generic such that it can be used for more than one mode if desired. Allow the use of free text messages to sign off in auto sequenced QSOs without the message being overwritten by the sequencer. Double click actions have been added to the Tx5 radio and push buttons to revert back to the default standard 73 message. Make DisplayText class interface more idiomatic C++ and simplify a bit. Fixed some displayed widget arrangements for different modes and sub-modes so that they are consistent when starting up and when switching mode or sub-mode. This is a big change which has been extensively tested but no doubt there will also be some new defects introduced. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 15:27:23 -04:00
msg = msg.replace (QRegularExpression {" CQ ([A-Z]{2,2}|[0-9]{3,3}) "}, " CQ_\\1 ").mid (column_qsoText + padding_);
int i1 = msg.indexOf (" ");
call = msg.mid (i1 + 1);
int i2 = call.indexOf (" ");
if (" R " == call.mid (i2, 3)) // MSK144 contest mode report
{
grid = call.mid (i2 + 3, 4);
}
else
{
grid = call.mid (i2 + 1, 4);
}
call = call.left (i2).replace (">", "");
}
int DecodedText::timeInSeconds()
{
return 60*_string.mid(column_time,2).toInt() + _string.mid(2,2).toInt();
}
/*
2343 -11 0.8 1259 # YV6BFE F6GUU R-08
2343 -19 0.3 718 # VE6WQ SQ2NIJ -14
2343 -7 0.3 815 # KK4DSD W7VP -16
2343 -13 0.1 3627 @ CT1FBK IK5YZT R+02
0605 Tx 1259 # CQ VK3ACF QF22
*/
QString DecodedText::report() // returns a string of the SNR field with a leading + or - followed by two digits
{
int sr = snr();
if (sr<-50)
sr = -50;
else
if (sr > 49)
sr = 49;
QString rpt;
rpt.sprintf("%d",abs(sr));
if (sr > 9)
rpt = "+" + rpt;
else
if (sr >= 0)
rpt = "+0" + rpt;
else
if (sr >= -9)
rpt = "-0" + rpt;
else
rpt = "-" + rpt;
return rpt;
}