WSJT-X/CMakeLists.txt

1524 lines
46 KiB
CMake
Raw Normal View History

cmake_minimum_required (VERSION 2.8.10 FATAL_ERROR)
if (APPLE)
#
# The following variables define the portability and compatability attributes of the Mac OS X build
# they are choosen with care and should not be changed without good cause. Note that they preclude
# doing a default build on OS X 10.7 since there is no 10.9 SDK available for Mac OS X 10.7. This doesn't
# preclude builds on newer versions of OS X being installed on Mac OS X 10.7, in fact it is exacty these
# options that ensure offcial build run on 10.7 and newer versions of Mac OS X. At some point it may
# be that some new version cannot be supported as well as 10.7, at that point the deployment target below
# must be moved on to 10.8 and we can no longer support Mac OS X 10.7.
#
# Among other things these options are chosen to match the portability and compatability options of the
# Qt framework dylibs which can be checked as follows:
#
# otool -l <binary> | grep -A3 LC_VERSION_MIN_MACOSX
#
set (CMAKE_OSX_DEPLOYMENT_TARGET 10.7
CACHE STRING "Earliest version of OS X supported
Earliest version we can support with C++11 & libc++ is 10.7.
Do not override this if you intend to build an official deployable installer.")
set (CMAKE_OSX_SYSROOT /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk
CACHE STRING "Mac OS X SDK to build with
Change this to the newest SDK available that you can install on your system (10.9 preferred).
Do not override this if you intend to build an official deployable installer.")
endif (APPLE)
project (wsjtx C CXX Fortran)
#
# CMake policies
#
if (POLICY CMP0020)
cmake_policy (SET CMP0020 NEW) # link to Qt winmain on Windows
endif (POLICY CMP0020)
if (POLICY CMP0043)
cmake_policy (SET CMP0043 NEW) # ignore COMPILE_DEFINITIONS_<CONFIG>
endif (POLICY CMP0043)
if (POLICY CMP0063)
cmake_policy (SET CMP0063 NEW) # honour visibility properties for all library types
endif (POLICY CMP0063)
include (${PROJECT_SOURCE_DIR}/CMake/VersionCompute.cmake)
message (STATUS "Building ${CMAKE_PROJECT_NAME}-${wsjtx_VERSION}")
#
# project information
#
set (PROJECT_NAME "WSJT-X")
set (PROJECT_VENDOR "Joe Taylor, K1JT")
set (PROJECT_CONTACT "Joe Taylor <k1jt@arrl.net>")
set (PROJECT_COPYRIGHT "Copyright (C) 2001-2016 by Joe Taylor, K1JT")
set (PROJECT_HOMEPAGE http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html)
set (PROJECT_MANUAL wsjtx-main)
set (PROJECT_MANUAL_DIRECTORY_URL http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/)
set (PROJECT_SAMPLES_URL http://downloads.sourceforge.net/project/wsjt/)
set (PROJECT_SAMPLES_UPLOAD_DEST frs.sourceforge.net:/home/frs/project/wsjt/)
set (PROJECT_SUMMARY_DESCRIPTION "${PROJECT_NAME} - JT9 and JT65 Modes for LF, MF and HF Amateur Radio.")
set (PROJECT_DESCRIPTION "${PROJECT_SUMMARY_DESCRIPTION}
${PROJECT_NAME} implements JT9, a new mode designed especially for the LF, MF,
and HF bands, as well as the popular mode JT65. Both modes were
designed for making reliable, confirmed QSOs under extreme
weak-signal conditions. They use nearly identical message structure
and source encoding. JT65 was designed for EME (“moonbounce”) on the
VHF/UHF bands and has also proved very effective for worldwide QRP
communication at HF; in contrast, JT9 is optimized for HF and lower
frequencies. JT9 is about 2 dB more sensitive than JT65A while using
less than 10% of the bandwidth. World-wide QSOs are possible with
power levels of a few watts and compromise antennas. A 2 kHz slice
of spectrum is essentially full when occupied by ten JT65 signals.
As many as 100 JT9 signals can fit into the same space, without
overlap.
.
${PROJECT_NAME} offers a bi-lingual operating mode in which you can transmit
and receive JT65 and JT9 signals, switching between modes
automatically as needed. Displayed bandwidth can be as large as 5
kHz. If your receiver has as upper-sideband filter at least 4 kHz
wide, you can have all the typical JT65 and JT9 activity on screen at
once, available for making QSOs with a click of the mouse. Even with
standard SSB-width IF filters, switching between JT65 and JT9 modes
is quick and convenient. Be sure to read the online ${PROJECT_NAME} User's
Guide.")
set (CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMake/Modules ${CMAKE_MODULE_PATH})
# make sure that the default configuration is a RELEASE
if (NOT CMAKE_BUILD_TYPE)
set (CMAKE_BUILD_TYPE RELEASE CACHE STRING
"Choose the type of build, options are: None Debug Release."
FORCE)
endif (NOT CMAKE_BUILD_TYPE)
if (CMAKE_BUILD_TYPE MATCHES "[Dd][Ee][Bb][Uu][Gg]")
set (is_debug_build 1)
endif ()
#
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# Options & features
#
# Some of these directly effect compilation by being defined in
# wsjtx_config.h.in which makes them available to the C/C++
# pre-processor.
#
include (CMakeDependentOption)
# Allow the developer to select if Dynamic or Static libraries are built
OPTION (BUILD_SHARED_LIBS "Build Shared Libraries" OFF)
# Set the LIB_TYPE variable to STATIC
SET (LIB_TYPE STATIC)
if (BUILD_SHARED_LIBS)
# User wants to build Dynamic Libraries, so change the LIB_TYPE variable to CMake keyword 'SHARED'
set (LIB_TYPE SHARED)
endif (BUILD_SHARED_LIBS)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
option (UPDATE_TRANSLATIONS "Update source translation translations/*.ts
files (WARNING: make clean will delete the source .ts files! Danger!)")
option (WSJT_SHARED_RUNTIME "Debugging option that allows running from a shared Cloud directory.")
option (WSJT_QDEBUG_TO_FILE "Redirect Qt debuging messages to a trace file.")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
option (WSJT_TRACE_CAT "Debugging option that turns on CAT diagnostics.")
option (WSJT_TRACE_CAT_POLLS "Debugging option that turns on CAT diagnostics during polling.")
option (WSJT_HAMLIB_TRACE "Debugging option that turns on minimal Hamlib internal diagnostics.")
option (WSJT_SOFT_KEYING "Apply a ramp to CW keying envelope to reduce transients." ON)
option (WSJT_SKIP_MANPAGES "Skip *nix manpage generation.")
option (WSJT_GENERATE_DOCS "Generate documentation files." ON)
option (WSJT_RIG_NONE_CAN_SPLIT "Allow split operation with \"None\" as rig.")
CMAKE_DEPENDENT_OPTION (WSJT_HAMLIB_VERBOSE_TRACE "Debugging option that turns on full Hamlib internal diagnostics." OFF WSJT_HAMLIB_TRACE OFF)
CMAKE_DEPENDENT_OPTION (WSJT_QDEBUG_IN_RELEASE "Leave Qt debugging statements in Release configuration." OFF
"NOT is_debug_build" OFF)
CMAKE_DEPENDENT_OPTION (WSJT_ENABLE_EXPERIMENTAL_FEATURES "Enable features not fully ready for public releases." ON
is_debug_build OFF)
CMAKE_DEPENDENT_OPTION (WSJT_CREATE_WINMAIN
"The wsjtx target is normally built as GUI executable with a WinMain entry point on Windows,
if you want a console application instead then set this option to OFF.
If you just want to see the debug output from the application then the easiest way is to
attach a debugger which will then receive the console output inside its console." ON
"WIN32" OFF)
set (PROJECT_ARCHITECTURE "${CMAKE_SYSTEM_PROCESSOR}")
if (NOT PROJECT_ARCHITECTURE)
# This is supposed to happen already on Windows
set (PROJECT_ARCHITECTURE "$ENV{PROCESSOR_ARCHITECTURE}")
endif (NOT PROJECT_ARCHITECTURE)
message (STATUS "******************************************************")
message (STATUS "Building for for: ${CMAKE_SYSTEM_NAME}-${PROJECT_ARCHITECTURE}")
message (STATUS "******************************************************")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# install locations
#
set (BIN_DESTINATION bin)
set (LIB_DESTINATION lib)
set (INCLUDE_DESTINATION include)
set (SHARE_DESTINATION share)
set (DOC_DESTINATION doc/${CMAKE_PROJECT_NAME})
set (DATA_DESTINATION ${CMAKE_PROJECT_NAME})
set (MANPAGE_DESTINATION ${SHARE_DESTINATION})
set (PLUGIN_DESTINATION lib/plugins)
set (QT_CONF_DESTINATION bin)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (WIN32)
set (SHARE_DESTINATION bin)
set (DOC_DESTINATION doc)
set (DATA_DESTINATION data)
set (PLUGIN_DESTINATION plugins)
endif (WIN32)
if (APPLE)
set (BIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/MacOS)
set (SHARE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (MANPAGE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (DOC_DESTINATION doc)
set (DATA_DESTINATION data)
set (PLUGIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/PlugIns)
set (QT_CONF_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
endif (APPLE)
set (WSJT_BIN_DESTINATION ${BIN_DESTINATION} CACHE PATH "Path for executables")
set (WSJT_LIB_DESTINATION ${LIB_DESTINATION} CACHE PATH "Path for libraries")
set (WSJT_INCLUDE_DESTINATION ${INCLUDE_DESTINATION} CACHE PATH "Path for library headers")
set (WSJT_SHARE_DESTINATION ${SHARE_DESTINATION} CACHE PATH "Path for shared content")
set (WSJT_DOC_DESTINATION ${DOC_DESTINATION} CACHE PATH "Path for documentation")
set (WSJT_DATA_DESTINATION ${DATA_DESTINATION} CACHE PATH "Path for shared RO data")
set (WSJT_MANPAGE_DESTINATION ${MANPAGE_DESTINATION} CACHE PATH "Path for manpages")
set (WSJT_PLUGIN_DESTINATION ${PLUGIN_DESTINATION} CACHE PATH "Path for plugins")
set (WSJT_QT_CONF_DESTINATION ${QT_CONF_DESTINATION} CACHE PATH "Path for the qt.conf file")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# Project sources
#
set (wsjt_qt_CXXSRCS
qt_helpers.cpp
MessageBox.cpp
MetaDataRegistry.cpp
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
NetworkServerLookup.cpp
revision_utils.cpp
WFPalette.cpp
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
Radio.cpp
RadioMetaType.cpp
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
Bands.cpp
Modes.cpp
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
FrequencyList.cpp
StationList.cpp
FrequencyLineEdit.cpp
CandidateKeyFilter.cpp
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
ForeignKeyDelegate.cpp
LiveFrequencyValidator.cpp
GetUserId.cpp
TraceFile.cpp
AudioDevice.cpp
Transceiver.cpp
TransceiverBase.cpp
EmulateSplitTransceiver.cpp
TransceiverFactory.cpp
PollingTransceiver.cpp
HamlibTransceiver.cpp
HRDTransceiver.cpp
DXLabSuiteCommanderTransceiver.cpp
Send status information to UDP server To facilitate interaction with other applications WSJT-X now sends status updates to a predefined UDP server or multicast group address. The status updates include the information currently posted to the decodes.txt and wsjtx_status.txt files. An optional back communications channel is also implemented allowing the UDP server application to control some basic actions in WSJT-X. A reference implementaion of a typical UDP server written in C++ using Qt is provided to demonstrate these facilities. This application is not intended as a user tool but only as an example of how a third party application may interact with WSJT-X. The UDP messages Use QDataStream based serialization. Messages are documented in NetworkMessage.hpp along with some helper classes that simplify the building and decoding of messages. Two message handling classes are introduced, MessageClient and MessageServer. WSJT-X uses the MessageClient class to manage outgoing and incoming UDP messages that allow communication with other applications. The MessageServer class implements the kind of code that a potential cooperating application might use. Although these classes use Qt serialization facilities, the message formats are easily read and written by applications that do not use the Qt framework. MessageAggregator is a demonstration application that uses MessageServer and presents a GUI that displays messages from one or more WSJT-X instances and allows sending back a CQ or QRZ reply invocation by double clicking a decode. This application is not intended as a user facing tool but rather as a demonstration of the WSJT-X UDP messaging facility. It also demonstrates being a multicast UDP server by allowing multiple instances to run concurrently. This is enabled by using an appropriate multicast group address as the server address. Cooperating applications need not implement multicast techniques but it is recomended otherwise only a single appliaction can act as a broadcast message (from WSJT-X) recipient. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 12:40:49 -04:00
NetworkMessage.cpp
MessageClient.cpp
Make the main window more portable and font change capable The Rx meter is now a better Qt citizen and can be resized. Added a more obvious peak signal indicator. It is now a custom widget derived from QFrame and is now directly added via promotion in Designer. Added a custom widget to act as a letter spin box, this is used for sub mode control. Switched the frequency tolerance widget to a combo box with preset values so that it is more uniform across systems and font sizes. Added container widgets for group control of various UI widgets such as QSO controls, DX call controls and WSPR controls. Introduced a stacked widget to allow the WSPR controls to be swapped in in place of the "QSO" controls. The "QSO" controls are are the Rx, Tx and related controls along with the main tab widget with the message buttons and fields. This means that the WSPR version of the main window (and EME Echo mode) are now much cleaner. Increased the size of the rig control widget and styled its colour using a dynamic property so that it can be defined in the Designer UI definition. Reinstated it as a push button to do a rig control reset and retry after an error. Reset most UI widgets to default properties, particularly removing any fixed sizes so that they can resize freely when fonts are changed. The overall layout is now controlled almost exclusively by stretch factors on some of the rows and columns of the various grid layout managers. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-25 18:41:13 -04:00
LettersSpinBox.cpp
HelpTextWindow.cpp
SampleDownloader.cpp
SampleDownloader/DirectoryDelegate.cpp
SampleDownloader/Directory.cpp
SampleDownloader/FileNode.cpp
SampleDownloader/RemoteFile.cpp
DisplayManual.cpp
MultiSettings.cpp
MaidenheadLocatorValidator.cpp
CallsignValidator.cpp
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
set (wsjt_qtmm_CXXSRCS
Audio/BWFFile.cpp
)
set (jt9_FSRCS
lib/jt9.f90
lib/jt9a.f90
)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
set (jt9_CXXSRCS
lib/ipcomm.cpp
)
set (wsjtx_CXXSRCS
logbook/adif.cpp
logbook/countrydat.cpp
logbook/countriesworked.cpp
logbook/logbook.cpp
psk_reporter.cpp
Modulator.cpp
Detector.cpp
logqso.cpp
displaytext.cpp
decodedtext.cpp
getfile.cpp
soundout.cpp
soundin.cpp
meterwidget.cpp
signalmeter.cpp
plotter.cpp
widegraph.cpp
echograph.cpp
echoplot.cpp
fastgraph.cpp
fastplot.cpp
about.cpp
astro.cpp
messageaveraging.cpp
WsprTxScheduler.cpp
mainwindow.cpp
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
Configuration.cpp
main.cpp
wsprnet.cpp
WSPRBandHopping.cpp
)
if (WIN32)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
set (wsjt_CXXSRCS
${wsjt_CXXSRCS}
killbyname.cpp
)
set (wsjt_qt_CXXSRCS
${wsjt_qt_CXXSRCS}
OmniRigTransceiver.cpp
)
endif (WIN32)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
set (wsjt_FSRCS
lib/afc65b.f90
lib/afc9.f90
lib/ana932.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/analytic.f90
lib/astro.f90
lib/astrosub.f90
lib/astro0.f90
lib/avecho.f90
lib/averms.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/azdist.f90
lib/baddata.f90
lib/ccf2.f90
lib/ccf65.f90
lib/chkhist.f90
lib/chkmsg.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/chkss2.f90
lib/coord.f90
lib/db.f90
lib/decode4.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/decode65a.f90
lib/decode65b.f90
lib/decode9w.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/decoder.f90
lib/deep4.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/deg2grid.f90
lib/degrade_snr.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/demod64a.f90
lib/detectmsk144.f90
lib/detectmsk40.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/determ.f90
lib/downsam9.f90
lib/encode232.f90
lib/encode4.f90
lib/encode_msk40.f90
lib/encode_msk144.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/entail.f90
lib/ephem.f90
lib/extract.f90
lib/extract4.f90
lib/extractmessage144.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/fano232.f90
lib/fast9.f90
lib/fast_decode.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/fchisq.f90
lib/fchisq0.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/fchisq65.f90
lib/fftw3mod.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/fil3.f90
lib/fil3c.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/fil4.f90
lib/fil6521.f90
lib/filbig.f90
lib/flat1.f90
lib/flat1a.f90
lib/flat1b.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/flat2.f90
lib/flat4.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/flat65.f90
lib/fmtmsg.f90
lib/foldspec9f.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/four2a.f90
lib/fqso_first.f90
lib/gen4.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/gen65.f90
lib/gen9.f90
lib/geniscat.f90
lib/genmsk.f90
lib/genmsk144.f90
lib/genmsk32.f90
lib/genmsk40.f90
lib/genmsk40.f90
lib/genmsk_short.f90
lib/genqra64.f90
lib/genwspr.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/geodist.f90
lib/getlags.f90
lib/getmet4.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/graycode.f90
lib/graycode65.f90
lib/grayline.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/grid2deg.f90
lib/hash.f90
lib/hashing.f90
lib/hint65.f90
lib/hspec.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/indexx.f90
lib/init_random_seed.f90
lib/interleave4.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/interleave63.f90
lib/interleave9.f90
lib/inter_wspr.f90
lib/iscat.f90
Make Fortran profiling timer function a callback with a default null implementation Groundwork for calling the decoders directly from C/C++ threads. To access the timer module timer_module must now be used. Instrumented code need only use the module function 'timer' which is now a procedure pointer that is guaranteed to be associated (unless null() is assigned to it, which should not be done). The default behaviour of 'timer' is to do nothing. If a Fortran program wishes to profile code it should now use the timer_impl module which contains a default timer implementation. The main program should call 'init_timer([filename])' before using 'timer' or calling routines that are instrumented. If 'init_timer([filename])'. If it is called then an optional file name may be provided with 'timer.out' being used as a default. The procedure 'fini_timer()' may be called to close the file. The default timer implementation is thread safe if used with OpenMP multi-threaded code so long as the OpenMP thread team is given the copyin(/timer_private/) attribute for correct operation. The common block /timer_private/ should be included for OpenMP use by including the file 'timer_common.inc'. The module 'lib/timer_C_wrapper.f90' provides a Fortran wrapper along with 'init' and 'fini' subroutines which allow a C/C++ application to call timer instrumented Fortran code and for it to receive callbacks of 'timer()' subroutine invocations. No C/C++ timer implementation is provided at this stage. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-27 10:40:57 -05:00
lib/iso_c_utilities.f90
lib/jplsubs.f
lib/jt4.f90
lib/jt4_decode.f90
lib/jt65_decode.f90
lib/jt65_mod.f90
lib/jt9_decode.f90
lib/jt9fano.f90
lib/JTMSKsim.f90
lib/jtmsk_decode.f90
lib/jtmsk_short.f90
lib/ldpcsim.f90
lib/libration.f90
lib/lorentzian.f90
lib/lpf1.f90
lib/mixlpf.f90
lib/makepings.f90
lib/moondopjpl.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/morse.f90
lib/move.f90
lib/mskdt.f90
lib/msk144d.f90
lib/msk144_decode.f90
lib/msk144sim.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/options.f90
lib/packjt.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/pctile.f90
lib/peakdt9.f90
lib/peakup.f90
lib/polyfit.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/prog_args.f90
lib/ps4.f90
lib/qra64a.f90
lib/readwav.f90
lib/rectify_msk.f90
lib/refspectrum.f90
lib/savec2.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/sec_midn.f90
lib/setup65.f90
lib/sh65.f90
lib/sh65snr.f90
lib/slasubs.f
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/sleep_msec.f90
lib/slope.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/smo.f90
lib/smo121.f90
lib/softsym.f90
lib/softsym9f.f90
lib/softsym9w.f90
lib/shell.f90
lib/spec64.f90
lib/spec9f.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/stdmsg.f90
lib/subtract65.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/sun.f90
lib/symspec.f90
lib/symspec2.f90
lib/symspec65.f90
lib/sync4.f90
lib/sync64.f90
lib/sync65.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/sync9.f90
lib/sync9f.f90
lib/sync9w.f90
lib/synciscat.f90
lib/syncmsk.f90
Make Fortran profiling timer function a callback with a default null implementation Groundwork for calling the decoders directly from C/C++ threads. To access the timer module timer_module must now be used. Instrumented code need only use the module function 'timer' which is now a procedure pointer that is guaranteed to be associated (unless null() is assigned to it, which should not be done). The default behaviour of 'timer' is to do nothing. If a Fortran program wishes to profile code it should now use the timer_impl module which contains a default timer implementation. The main program should call 'init_timer([filename])' before using 'timer' or calling routines that are instrumented. If 'init_timer([filename])'. If it is called then an optional file name may be provided with 'timer.out' being used as a default. The procedure 'fini_timer()' may be called to close the file. The default timer implementation is thread safe if used with OpenMP multi-threaded code so long as the OpenMP thread team is given the copyin(/timer_private/) attribute for correct operation. The common block /timer_private/ should be included for OpenMP use by including the file 'timer_common.inc'. The module 'lib/timer_C_wrapper.f90' provides a Fortran wrapper along with 'init' and 'fini' subroutines which allow a C/C++ application to call timer instrumented Fortran code and for it to receive callbacks of 'timer()' subroutine invocations. No C/C++ timer implementation is provided at this stage. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-27 10:40:57 -05:00
lib/timer_C_wrapper.f90
lib/timer_impl.f90
lib/timer_module.f90
lib/timf2.f90
lib/tweak1.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/twkfreq.f90
lib/twkfreq65.f90
lib/wav11.f90
lib/wav12.f90
lib/wavhdr.f90
lib/xcor.f90
lib/xcor4.f90
lib/wavhdr.f90
lib/wqencode.f90
lib/wspr_downsample.f90
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/zplot9.f90
)
set (ka9q_CSRCS
lib/ftrsd/decode_rs.c
lib/ftrsd/encode_rs.c
lib/ftrsd/init_rs.c
)
set_source_files_properties (${ka9q_CSRCS} PROPERTIES COMPILE_FLAGS -Wno-sign-compare)
set (ldpc_CSRCS
lib/ldpc/alloc.c
lib/ldpc/rcode.c
lib/ldpc/dec.c
lib/ldpc/enc.c
lib/ldpc/intio.c
lib/ldpc/blockio.c
lib/ldpc/check.c
lib/ldpc/encode.c
lib/ldpc/open.c
lib/ldpc/mod2dense.c
lib/ldpc/mod2sparse.c
lib/ldpc/mod2convert.c
lib/ldpc/distrib.c
)
set (qra_CSRCS
lib/qra/qra64/qra64.c
lib/qra/qra64/qra64_subs.c
lib/qra/qracodes/npfwht.c
lib/qra/qracodes/pdmath.c
lib/qra/qracodes/qra12_63_64_irr_b.c
lib/qra/qracodes/qra13_64_64_irr_e.c
lib/qra/qracodes/qracodes.c
)
set (wsjt_CSRCS
${ka9q_CSRCS}
lib/ftrsd/ftrsd2.c
lib/sgran.c
lib/golay24_table.c
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/gran.c
lib/igray.c
lib/init_random_seed.c
lib/ldpc32_table.c
lib/wsprd/nhash.c
lib/tab.c
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/tmoonsub.c
lib/usleep.c
lib/vit213.c
lib/wisdom.c
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
lib/wrapkarn.c
${ldpc_CSRCS}
${qra_CSRCS}
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
set (wsjt_qt_UISRCS
wf_palette_design_dialog.ui
)
set (wsprsim_CSRCS
lib/wsprd/wsprsim.c
lib/wsprd/wsprsim_utils.c
lib/wsprd/wsprd_utils.c
lib/wsprd/fano.c
lib/wsprd/tab.c
lib/wsprd/nhash.c
)
set (wsprd_CSRCS
lib/wsprd/wsprd.c
lib/wsprd/wsprsim_utils.c
lib/wsprd/wsprd_utils.c
lib/wsprd/fano.c
lib/wsprd/jelinek.c
lib/wsprd/tab.c
lib/wsprd/nhash.c
lib/init_random_seed.c
)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
set (wsjtx_UISRCS
mainwindow.ui
about.ui
astro.ui
echograph.ui
fastgraph.ui
messageaveraging.ui
widegraph.ui
logqso.ui
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
Configuration.ui
)
set (UDP_library_CXXSRCS
Radio.cpp
RadioMetaType.cpp
NetworkMessage.cpp
Send status information to UDP server To facilitate interaction with other applications WSJT-X now sends status updates to a predefined UDP server or multicast group address. The status updates include the information currently posted to the decodes.txt and wsjtx_status.txt files. An optional back communications channel is also implemented allowing the UDP server application to control some basic actions in WSJT-X. A reference implementaion of a typical UDP server written in C++ using Qt is provided to demonstrate these facilities. This application is not intended as a user tool but only as an example of how a third party application may interact with WSJT-X. The UDP messages Use QDataStream based serialization. Messages are documented in NetworkMessage.hpp along with some helper classes that simplify the building and decoding of messages. Two message handling classes are introduced, MessageClient and MessageServer. WSJT-X uses the MessageClient class to manage outgoing and incoming UDP messages that allow communication with other applications. The MessageServer class implements the kind of code that a potential cooperating application might use. Although these classes use Qt serialization facilities, the message formats are easily read and written by applications that do not use the Qt framework. MessageAggregator is a demonstration application that uses MessageServer and presents a GUI that displays messages from one or more WSJT-X instances and allows sending back a CQ or QRZ reply invocation by double clicking a decode. This application is not intended as a user facing tool but rather as a demonstration of the WSJT-X UDP messaging facility. It also demonstrates being a multicast UDP server by allowing multiple instances to run concurrently. This is enabled by using an appropriate multicast group address as the server address. Cooperating applications need not implement multicast techniques but it is recomended otherwise only a single appliaction can act as a broadcast message (from WSJT-X) recipient. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 12:40:49 -04:00
MessageServer.cpp
)
set (UDP_library_HEADERS
Radio.hpp
MessageServer.hpp
${PROJECT_BINARY_DIR}/udp_export.h
)
set (message_aggregator_CXXSRCS
UDPExamples/MessageAggregator.cpp
UDPExamples/MessageAggregatorMainWindow.cpp
UDPExamples/DecodesModel.cpp
UDPExamples/BeaconsModel.cpp
UDPExamples/ClientWidget.cpp
)
set (message_aggregator_STYLESHEETS
UDPExamples/qss/default.qss
)
set (all_CXXSRCS
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
${wsjt_CXXSRCS}
${wsjt_qt_CXXSRCS}
${wsjt_qtmm_CXXSRCS}
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
${jt9_CXXSRCS}
${wsjtx_CXXSRCS}
)
set (all_C_and_CXXSRCS
${wsjt_CSRCS}
${wsprsim_CSRCS}
${wsprd_CSRCS}
${all_CXXSRCS}
)
set (TOP_LEVEL_RESOURCES
shortcuts.txt
mouse_commands.txt
prefixes.txt
cty.dat
icons/Darwin/wsjtx.iconset/icon_128x128.png
contrib/gpl-v3-logo.svg
artwork/splash.png
)
set (PALETTE_FILES
Palettes/Banana.pal
Palettes/Blue1.pal
Palettes/Blue2.pal
Palettes/Blue3.pal
Palettes/Brown.pal
Palettes/Cyan1.pal
Palettes/Cyan2.pal
Palettes/Cyan3.pal
Palettes/Default.pal
Palettes/Digipan.pal
Palettes/Fldigi.pal
Palettes/Gray1.pal
Palettes/Gray2.pal
Palettes/Green1.pal
Palettes/Green2.pal
Palettes/Jungle.pal
Palettes/Linrad.pal
Palettes/Negative.pal
Palettes/Orange.pal
Palettes/Pink.pal
Palettes/Rainbow.pal
Palettes/Scope.pal
Palettes/Sunburst.pal
Palettes/VK4BDJ.pal
Palettes/YL2KF.pal
Palettes/Yellow1.pal
Palettes/Yellow2.pal
Palettes/ZL1FZ.pal
)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (APPLE)
set (WSJTX_ICON_FILE ${CMAKE_PROJECT_NAME}.icns)
set (ICONSRCS
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512@2x.png
)
add_custom_command (
OUTPUT ${WSJTX_ICON_FILE}
COMMAND iconutil -c icns --output "${CMAKE_BINARY_DIR}/${WSJTX_ICON_FILE}" "${CMAKE_SOURCE_DIR}/icons/Darwin/${CMAKE_PROJECT_NAME}.iconset"
DEPENDS ${ICONSRCS}
COMMENT "Building Icons"
)
endif (APPLE)
set_source_files_properties (${WSJTX_ICON_FILE} PROPERTIES MACOSX_PACKAGE_LOCATION Resources)
if (WSJT_QDEBUG_IN_RELEASE)
# context info in Qt message handler in release configuration
set_property (DIRECTORY APPEND PROPERTY
COMPILE_DEFINITIONS $<$<NOT:$<CONFIG:Debug>>:QT_MESSAGELOGCONTEXT>
)
else (WSJT_QDEBUG_IN_RELEASE)
# disable Qt trace and warning messages from release configurations
set_property (DIRECTORY APPEND PROPERTY
COMPILE_DEFINITIONS $<$<NOT:$<CONFIG:Debug>>:QT_NO_DEBUG_OUTPUT;QT_NO_WARNING_OUTPUT>
)
endif (WSJT_QDEBUG_IN_RELEASE)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND_STRING PROPERTY COMPILE_FLAGS " -include wsjtx_config.h")
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND PROPERTY OBJECT_DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/wsjtx_config.h)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (WIN32)
# generate the OmniRig COM interface source
find_program (DUMPCPP dumpcpp)
if (DUMPCPP-NOTFOUND)
message (FATAL_ERROR "dumpcpp tool not found")
endif (DUMPCPP-NOTFOUND)
execute_process (
COMMAND ${DUMPCPP} -getfile {4FE359C5-A58F-459D-BE95-CA559FB4F270}
OUTPUT_VARIABLE AXSERVER
OUTPUT_STRIP_TRAILING_WHITESPACE
)
string (STRIP "${AXSERVER}" AXSERVER)
if (NOT AXSERVER)
message (FATAL_ERROR "You need to install OmniRig on this computer")
endif (NOT AXSERVER)
string (REPLACE "\"" "" AXSERVER ${AXSERVER})
file (TO_CMAKE_PATH ${AXSERVER} AXSERVERSRCS)
endif (WIN32)
#
# decide on platform specifc packing and fixing up
#
if (APPLE)
set (WSJTX_BUNDLE_VERSION ${wsjtx_VERSION})
# make sure CMAKE_INSTALL_PREFIX ends in /
string (LENGTH "${CMAKE_INSTALL_PREFIX}" LEN)
math (EXPR LEN "${LEN} -1" )
string (SUBSTRING "${CMAKE_INSTALL_PREFIX}" ${LEN} 1 ENDCH)
if (NOT "${ENDCH}" STREQUAL "/")
set (CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}/")
endif ()
endif (APPLE)
#
# find some useful tools
#
find_program(CTAGS ctags)
find_program(ETAGS etags)
#
# sub-directories
#
add_subdirectory (samples)
if (WSJT_GENERATE_DOCS)
add_subdirectory (doc)
endif (WSJT_GENERATE_DOCS)
#
# Library building setup
#
include (GenerateExportHeader)
set (CMAKE_CXX_VISIBILITY_PRESET hidden)
set (CMAKE_C_VISIBILITY_PRESET hidden)
set (CMAKE_Fortran_VISIBILITY_PRESET hidden)
set (CMAKE_VISIBILITY_INLINES_HIDDEN ON)
#set (CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE ON)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# C & C++ setup
#
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wextra -std=c++11 -fexceptions -frtti")
if (NOT APPLE)
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-pragmas")
set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -fdata-sections -ffunction-sections")
set (CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL} -fdata-sections -ffunction-sections")
set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -fdata-sections -ffunction-sections")
set (CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} -fdata-sections -ffunction-sections")
endif (NOT APPLE)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (WIN32)
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endif (WIN32)
if (APPLE)
if (${CMAKE_CXX_COMPILER_ID} STREQUAL "Clang")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
endif (${CMAKE_CXX_COMPILER_ID} STREQUAL "Clang")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
else (APPLE)
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -pthread")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -pthread")
endif (APPLE)
#
# Fortran setup
#
set (General_FFLAGS "-Wall -Wno-conversion -fbounds-check -fno-second-underscore")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# FFLAGS depend on the compiler
get_filename_component (Fortran_COMPILER_NAME ${CMAKE_Fortran_COMPILER} NAME)
if (Fortran_COMPILER_NAME MATCHES "gfortran.*")
# gfortran
# CMake compiler test is supposed to do this but doesn't yet
if (CMAKE_OSX_DEPLOYMENT_TARGET)
set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET}")
endif (CMAKE_OSX_DEPLOYMENT_TARGET)
if (CMAKE_OSX_SYSROOT)
set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -isysroot ${CMAKE_OSX_SYSROOT}")
endif (CMAKE_OSX_SYSROOT)
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -funroll-all-loops -fno-f2c ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check -fno-f2c ${General_FFLAGS}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
elseif (Fortran_COMPILER_NAME MATCHES "ifort.*")
# ifort (untested)
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -f77rtl ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -f77rtl ${General_FFLAGS}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
elseif (Fortran_COMPILER_NAME MATCHES "g77")
# g77
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -funroll-all-loops -fno-f2c -m32 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check -fno-f2c -m32 ${General_FFLAGS}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
else (Fortran_COMPILER_NAME MATCHES "gfortran.*")
message ("CMAKE_Fortran_COMPILER full path: " ${CMAKE_Fortran_COMPILER})
message ("Fortran compiler: " ${Fortran_COMPILER_NAME})
message ("No optimized Fortran compiler flags are known, we just try -O3...")
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -O3 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check ${General_FFLAGS}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endif (Fortran_COMPILER_NAME MATCHES "gfortran.*")
#
# Linker setup
#
if (NOT APPLE)
set (CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} -Wl,--gc-sections")
set (CMAKE_EXE_LINKER_FLAGS_MINSIZEREL "${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL} -Wl,--gc-sections")
endif (NOT APPLE)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# setup and test Fortran C/C++ interaction
#
include (FortranCInterface)
FortranCInterface_VERIFY (CXX QUIET)
FortranCInterface_HEADER (FC.h MACRO_NAMESPACE "FC_" SYMBOL_NAMESPACE "FC_"
SYMBOLS
grayline
)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# sort out pre-requisites
#
#
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# Setup RPATH so that built executable targets will run in both the
# build tree and the install location without having to set a
# (DYLD|LD)_LIBRARY_PATH override.
#
# use the full RPATH of the build tree
set (CMAKE_SKIP_BUILD_RPATH FALSE)
# when building, don't use the install RPATH, it will still be used
# later on in the install phase
set (CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# add the automaticaly determined parts of the RPATH which point to
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# directories outside of the build tree to the install RPATH
set (CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
# the RPATH to be used when installing, but only if it's not a system
# directory
# list (FIND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}" isSystemDir)
# if ("${isSystemDir}" STREQUAL "-1")
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
# endif ("${isSystemDir}" STREQUAL "-1")
set (QT_NEED_RPATH FALSE)
if (NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib64" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib64")
set (QT_NEED_RPATH TRUE)
endif ()
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# OpenMP
#
find_package (OpenMP)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# fftw3 single precision library
#
find_package (FFTW3 COMPONENTS double single threads REQUIRED)
#
# libhamlib setup
#
set (hamlib_STATIC 1)
find_package (hamlib 3 REQUIRED)
find_program (RIGCTL_EXE rigctl)
find_program (RIGCTLD_EXE rigctld)
message (STATUS "hamlib_INCLUDE_DIRS: ${hamlib_INCLUDE_DIRS}")
message (STATUS "hamlib_LIBRARIES: ${hamlib_LIBRARIES}")
message (STATUS "hamlib_LIBRARY_DIRS: ${hamlib_LIBRARY_DIRS}")
#
# Qt5 setup
#
# Widgets finds its own dependencies.
find_package (Qt5Widgets 5 REQUIRED)
find_package (Qt5Multimedia 5 REQUIRED)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (WIN32)
add_definitions (-DQT_NEEDS_QTMAIN)
find_package (Qt5AxContainer REQUIRED)
endif (WIN32)
#
# stuff only qmake can tell us
#
get_target_property (QMAKE_EXECUTABLE Qt5::qmake LOCATION)
function (QUERY_QMAKE VAR RESULT)
exec_program (${QMAKE_EXECUTABLE} ARGS "-query ${VAR}" RETURN_VALUE return_code OUTPUT_VARIABLE output)
if (NOT return_code)
file (TO_CMAKE_PATH "${output}" output)
set (${RESULT} ${output} PARENT_SCOPE)
endif (NOT return_code)
message (STATUS "Asking qmake for ${RESULT} and got ${output}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endfunction (QUERY_QMAKE)
query_qmake (QT_INSTALL_PLUGINS QT_PLUGINS_DIR)
query_qmake (QT_INSTALL_IMPORTS QT_IMPORTS_DIR)
query_qmake (QT_HOST_DATA QT_DATA_DIR)
set (QT_MKSPECS_DIR ${QT_DATA_DIR}/mkspecs)
# Tell CMake to run moc when necessary
set (CMAKE_AUTOMOC ON)
include_directories (${CMAKE_CURRENT_BINARY_DIR})
# don't use Qt "keywords" signal, slot, emit in generated files to
# avoid compatability issue with other libraries
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# ADD_DEFINITIONS (-DQT_NO_KEYWORDS)
# ADD_DEFINITIONS (-DUNICODE) #as per qmake
# As moc files are generated in the binary dir, tell CMake to always
# look for includes there:
set (CMAKE_INCLUDE_CURRENT_DIR ON)
# project definitions
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
add_definitions (-DQT5 -DCMAKE_BUILD -DBIGSYM=1)
if (CMAKE_HOST_UNIX)
add_definitions (-DUNIX)
elseif (CMAKE_HOST_WIN32)
add_definitions (-DWIN32)
endif ()
#
# source navigation
#
set (sources
${CMAKE_SOURCE_DIR}/*
${CMAKE_SOURCE_DIR}/logbook/*
${CMAKE_SOURCE_DIR}/lib/*
)
add_custom_target (ctags COMMAND ${CTAGS} -o ${CMAKE_SOURCE_DIR}/tags -R ${sources})
add_custom_target (etags COMMAND ${ETAGS} -o ${CMAKE_SOURCE_DIR}/TAGS -R ${sources})
# embedded resources
function (add_resources resources path)
foreach (resource_file_ ${ARGN})
get_filename_component (name_ ${resource_file_} NAME)
file (TO_NATIVE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/${resource_file_} source_)
file (TO_NATIVE_PATH ${path}/${name_} dest_)
set (resources_ "${resources_}\n <file alias=\"${dest_}\">${source_}</file>")
set (${resources} ${${resources}}${resources_} PARENT_SCOPE)
endforeach (resource_file_ ${ARGN})
endfunction (add_resources resources path)
add_resources (wsjtx_RESOURCES "" ${TOP_LEVEL_RESOURCES})
add_resources (wsjtx_RESOURCES /Palettes ${PALETTE_FILES})
configure_file (wsjtx.qrc.in wsjtx.qrc @ONLY)
# UI generation
qt5_wrap_ui (wsjt_qt_GENUISRCS ${wsjt_qt_UISRCS})
qt5_wrap_ui (wsjtx_GENUISRCS ${wsjtx_UISRCS})
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# Resource generation
qt5_add_resources (wsjtx_RESOURCES_RCC ${CMAKE_BINARY_DIR}/wsjtx.qrc)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# AX COM servers
if (WIN32)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
include (QtAxMacros)
wrap_ax_server (GENAXSRCS ${AXSERVERSRCS})
endif (WIN32)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# targets
#
# build a library of package functionality (without and optionally with OpenMP support)
add_library (wsjt_cxx STATIC ${wsjt_CSRCS} ${wsjt_CXXSRCS})
# build an OpenMP variant of the Fortran library routines
add_library (wsjt_fort STATIC ${wsjt_FSRCS})
target_link_libraries (wsjt_fort ${FFTW3_LIBRARIES})
if (${OPENMP_FOUND} OR APPLE)
add_library (wsjt_fort_omp STATIC ${wsjt_FSRCS})
target_link_libraries (wsjt_fort_omp ${FFTW3_LIBRARIES})
set_target_properties (wsjt_fort_omp
PROPERTIES
COMPILE_FLAGS "${OpenMP_C_FLAGS}"
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
)
file (MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp)
if (APPLE)
# On Mac we don't have working OpenMP support in the C/C++
# compilers so we have to manually set the correct flags to get
# OpenMP support in jt9.
target_compile_options (wsjt_fort_omp
PRIVATE
$<$<COMPILE_LANGUAGE:Fortran>:-fopenmp> # assumes GNU style Fortran compiler
)
endif (APPLE)
endif (${OPENMP_FOUND} OR APPLE)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# build a library of package Qt functionality
add_library (wsjt_qt STATIC ${wsjt_qt_CXXSRCS} ${wsjt_qt_GENUISRCS} ${GENAXSRCS})
# set wsjtx_udp exports to static variants
target_compile_definitions (wsjt_qt PUBLIC UDP_STATIC_DEFINE)
target_link_libraries (wsjt_qt Qt5::Widgets Qt5::Network)
target_include_directories (wsjt_qt BEFORE PRIVATE ${hamlib_INCLUDE_DIRS})
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (WIN32)
target_link_libraries (wsjt_qt Qt5::AxContainer Qt5::AxBase)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endif (WIN32)
add_library (wsjt_qtmm STATIC ${wsjt_qtmm_CXXSRCS} ${wsjt_qtmm_GENUISRCS})
target_link_libraries (wsjt_qtmm Qt5::Multimedia)
add_executable (jt4sim lib/jt4sim.f90 wsjtx.rc)
target_link_libraries (jt4sim wsjt_fort wsjt_cxx)
add_executable (jt65sim lib/jt65sim.f90 wsjtx.rc)
target_link_libraries (jt65sim wsjt_fort wsjt_cxx)
add_executable (qra64sim lib/qra/qra64/qra64sim.f90 wsjtx.rc)
target_link_libraries (qra64sim wsjt_fort wsjt_cxx)
add_executable (msk32d lib/msk32d.f90 wsjtx.rc)
target_link_libraries (msk32d wsjt_fort wsjt_cxx)
add_executable (msk32d_ldpc lib/msk32d_ldpc.f90 wsjtx.rc)
target_link_libraries (msk32d_ldpc wsjt_fort wsjt_cxx)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
add_executable (jt9sim lib/jt9sim.f90 wsjtx.rc)
target_link_libraries (jt9sim wsjt_fort wsjt_cxx)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
add_executable (jt65code lib/jt65code.f90 wsjtx.rc)
target_link_libraries (jt65code wsjt_fort wsjt_cxx)
add_executable (qra64code lib/qra64code.f90 wsjtx.rc)
target_link_libraries (qra64code wsjt_fort wsjt_cxx)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
add_executable (jt9code lib/jt9code.f90 wsjtx.rc)
target_link_libraries (jt9code wsjt_fort wsjt_cxx)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
add_executable (wsprd ${wsprd_CSRCS})
target_include_directories (wsprd PRIVATE ${FFTW3_INCLUDE_DIRS})
target_link_libraries (wsprd ${FFTW3_LIBRARIES})
add_executable (wsprsim ${wsprsim_CSRCS})
add_executable (jt4code lib/jt4code.f90 wsjtx.rc)
target_link_libraries (jt4code wsjt_fort wsjt_cxx)
add_executable (jt65 lib/jt65.f90 lib/jt65_test.f90 wsjtx.rc)
target_link_libraries (jt65 wsjt_fort wsjt_cxx)
add_executable (ldpcsim lib/ldpcsim.f90 wsjtx.rc)
target_link_libraries (ldpcsim wsjt_fort wsjt_cxx)
add_executable (JTMSKsim lib/JTMSKsim.f90 wsjtx.rc)
target_link_libraries (JTMSKsim wsjt_fort wsjt_cxx)
add_executable (msk144sim lib/msk144sim.f90 wsjtx.rc)
target_link_libraries (msk144sim wsjt_fort wsjt_cxx)
add_executable (msk144d lib/msk144d.f90 wsjtx.rc)
target_link_libraries (msk144d wsjt_fort wsjt_cxx)
add_executable (jt9 ${jt9_FSRCS} ${jt9_CXXSRCS} wsjtx.rc)
if (${OPENMP_FOUND} OR APPLE)
if (APPLE)
# On Mac we don't have working OpenMP support in the C/C++
# compilers so we have to manually set the correct linking flags
# and libraries to get OpenMP support in jt9.
set_target_properties (jt9
PROPERTIES
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
LINK_LIBRARIES "gomp;gcc_s.1" # assume GNU libgcc OpenMP
)
target_compile_options (jt9
PRIVATE
$<$<COMPILE_LANGUAGE:Fortran>:-fopenmp> # assumes GNU style Fortran compiler
)
else (APPLE)
set_target_properties (jt9
PROPERTIES
COMPILE_FLAGS "${OpenMP_C_FLAGS}"
LINK_FLAGS "${OpenMP_C_FLAGS}"
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
)
endif (APPLE)
target_link_libraries (jt9 wsjt_fort_omp wsjt_cxx Qt5::Core)
else (${OPENMP_FOUND} OR APPLE)
target_link_libraries (jt9 wsjt_fort wsjt_cxx Qt5::Core)
endif (${OPENMP_FOUND} OR APPLE)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# build the main application
add_executable (wsjtx MACOSX_BUNDLE
${wsjtx_CXXSRCS}
${wsjtx_GENUISRCS}
wsjtx.rc
${WSJTX_ICON_FILE}
${wsjtx_RESOURCES_RCC}
)
if (WSJT_CREATE_WINMAIN)
set_target_properties (wsjtx PROPERTIES WIN32_EXECUTABLE ON)
endif (WSJT_CREATE_WINMAIN)
set_target_properties (wsjtx PROPERTIES
MACOSX_BUNDLE_INFO_STRING "${WSJTX_DESCRIPTION_SUMMARY}"
MACOSX_BUNDLE_ICON_FILE "${WSJTX_ICON_FILE}"
MACOSX_BUNDLE_BUNDLE_VERSION ${wsjtx_VERSION}
MACOSX_BUNDLE_SHORT_VERSION_STRING "v${wsjtx_VERSION}"
MACOSX_BUNDLE_LONG_VERSION_STRING "Version ${wsjtx_VERSION}"
MACOSX_BUNDLE_BUNDLE_NAME "${PROJECT_NAME}"
MACOSX_BUNDLE_COPYRIGHT "${PROJECT_COPYRIGHT}"
MACOSX_BUNDLE_GUI_IDENTIFIER "org.k1jt.wsjtx"
)
target_include_directories (wsjtx PRIVATE ${FFTW3_INCLUDE_DIRS})
target_link_libraries (wsjtx wsjt_fort wsjt_cxx wsjt_qt wsjt_qtmm ${hamlib_LIBRARIES} ${FFTW3_LIBRARIES})
qt5_use_modules (wsjtx SerialPort) # not sure why the interface link library syntax above doesn't work
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# make a library for WSJT-X UDP servers
# add_library (wsjtx_udp SHARED ${UDP_library_CXXSRCS})
add_library (wsjtx_udp-static STATIC ${UDP_library_CXXSRCS})
#target_include_directories (wsjtx_udp
# INTERFACE
# $<INSTALL_INTERFACE:${WSJT_INCLUDE_DESTINATION}/wsjtx>
# )
target_include_directories (wsjtx_udp-static
INTERFACE
$<INSTALL_INTERFACE:${WSJT_INCLUDE_DESTINATION}/wsjtx>
)
#set_target_properties (wsjtx_udp PROPERTIES
# PUBLIC_HEADER "${UDP_library_HEADERS}"
# )
set_target_properties (wsjtx_udp-static PROPERTIES
OUTPUT_NAME wsjtx_udp
)
target_compile_definitions (wsjtx_udp-static PUBLIC UDP_STATIC_DEFINE)
#qt5_use_modules (wsjtx_udp Network)
qt5_use_modules (wsjtx_udp-static Network)
generate_export_header (wsjtx_udp-static BASE_NAME udp)
add_executable (udp_daemon UDPExamples/UDPDaemon.cpp UDPExamples/udp_daemon.rc ${WSJTX_ICON_FILE})
target_link_libraries (udp_daemon wsjtx_udp-static)
add_resources (message_aggregator_RESOURCES /qss ${message_aggregator_STYLESHEETS})
configure_file (UDPExamples/message_aggregator.qrc.in message_aggregator.qrc @ONLY)
qt5_add_resources (message_aggregator_RESOURCES_RCC ${CMAKE_CURRENT_BINARY_DIR}/message_aggregator.qrc)
Send status information to UDP server To facilitate interaction with other applications WSJT-X now sends status updates to a predefined UDP server or multicast group address. The status updates include the information currently posted to the decodes.txt and wsjtx_status.txt files. An optional back communications channel is also implemented allowing the UDP server application to control some basic actions in WSJT-X. A reference implementaion of a typical UDP server written in C++ using Qt is provided to demonstrate these facilities. This application is not intended as a user tool but only as an example of how a third party application may interact with WSJT-X. The UDP messages Use QDataStream based serialization. Messages are documented in NetworkMessage.hpp along with some helper classes that simplify the building and decoding of messages. Two message handling classes are introduced, MessageClient and MessageServer. WSJT-X uses the MessageClient class to manage outgoing and incoming UDP messages that allow communication with other applications. The MessageServer class implements the kind of code that a potential cooperating application might use. Although these classes use Qt serialization facilities, the message formats are easily read and written by applications that do not use the Qt framework. MessageAggregator is a demonstration application that uses MessageServer and presents a GUI that displays messages from one or more WSJT-X instances and allows sending back a CQ or QRZ reply invocation by double clicking a decode. This application is not intended as a user facing tool but rather as a demonstration of the WSJT-X UDP messaging facility. It also demonstrates being a multicast UDP server by allowing multiple instances to run concurrently. This is enabled by using an appropriate multicast group address as the server address. Cooperating applications need not implement multicast techniques but it is recomended otherwise only a single appliaction can act as a broadcast message (from WSJT-X) recipient. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 12:40:49 -04:00
add_executable (message_aggregator
${message_aggregator_CXXSRCS}
${WSJTX_ICON_FILE}
UDPExamples/message_aggregator.rc
${message_aggregator_RESOURCES_RCC}
Send status information to UDP server To facilitate interaction with other applications WSJT-X now sends status updates to a predefined UDP server or multicast group address. The status updates include the information currently posted to the decodes.txt and wsjtx_status.txt files. An optional back communications channel is also implemented allowing the UDP server application to control some basic actions in WSJT-X. A reference implementaion of a typical UDP server written in C++ using Qt is provided to demonstrate these facilities. This application is not intended as a user tool but only as an example of how a third party application may interact with WSJT-X. The UDP messages Use QDataStream based serialization. Messages are documented in NetworkMessage.hpp along with some helper classes that simplify the building and decoding of messages. Two message handling classes are introduced, MessageClient and MessageServer. WSJT-X uses the MessageClient class to manage outgoing and incoming UDP messages that allow communication with other applications. The MessageServer class implements the kind of code that a potential cooperating application might use. Although these classes use Qt serialization facilities, the message formats are easily read and written by applications that do not use the Qt framework. MessageAggregator is a demonstration application that uses MessageServer and presents a GUI that displays messages from one or more WSJT-X instances and allows sending back a CQ or QRZ reply invocation by double clicking a decode. This application is not intended as a user facing tool but rather as a demonstration of the WSJT-X UDP messaging facility. It also demonstrates being a multicast UDP server by allowing multiple instances to run concurrently. This is enabled by using an appropriate multicast group address as the server address. Cooperating applications need not implement multicast techniques but it is recomended otherwise only a single appliaction can act as a broadcast message (from WSJT-X) recipient. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 12:40:49 -04:00
)
target_link_libraries (message_aggregator Qt5::Widgets wsjtx_udp-static)
Send status information to UDP server To facilitate interaction with other applications WSJT-X now sends status updates to a predefined UDP server or multicast group address. The status updates include the information currently posted to the decodes.txt and wsjtx_status.txt files. An optional back communications channel is also implemented allowing the UDP server application to control some basic actions in WSJT-X. A reference implementaion of a typical UDP server written in C++ using Qt is provided to demonstrate these facilities. This application is not intended as a user tool but only as an example of how a third party application may interact with WSJT-X. The UDP messages Use QDataStream based serialization. Messages are documented in NetworkMessage.hpp along with some helper classes that simplify the building and decoding of messages. Two message handling classes are introduced, MessageClient and MessageServer. WSJT-X uses the MessageClient class to manage outgoing and incoming UDP messages that allow communication with other applications. The MessageServer class implements the kind of code that a potential cooperating application might use. Although these classes use Qt serialization facilities, the message formats are easily read and written by applications that do not use the Qt framework. MessageAggregator is a demonstration application that uses MessageServer and presents a GUI that displays messages from one or more WSJT-X instances and allows sending back a CQ or QRZ reply invocation by double clicking a decode. This application is not intended as a user facing tool but rather as a demonstration of the WSJT-X UDP messaging facility. It also demonstrates being a multicast UDP server by allowing multiple instances to run concurrently. This is enabled by using an appropriate multicast group address as the server address. Cooperating applications need not implement multicast techniques but it is recomended otherwise only a single appliaction can act as a broadcast message (from WSJT-X) recipient. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 12:40:49 -04:00
if (WSJT_CREATE_WINMAIN)
set_target_properties (message_aggregator PROPERTIES WIN32_EXECUTABLE ON)
endif (WSJT_CREATE_WINMAIN)
if (UNIX)
if (NOT WSJT_SKIP_MANPAGES)
add_subdirectory (manpages)
add_dependencies (wsjtx manpages)
endif (NOT WSJT_SKIP_MANPAGES)
if (NOT APPLE)
add_subdirectory (debian)
add_dependencies (wsjtx debian)
endif (NOT APPLE)
endif (UNIX)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# installation
#
install (TARGETS wsjtx
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
BUNDLE DESTINATION . COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
# install (TARGETS wsjtx_udp EXPORT udp
# RUNTIME DESTINATION ${WSJT_BIN_DESTINATION}
# LIBRARY DESTINATION ${WSJT_LIB_DESTINATION}
# ARCHIVE DESTINATION ${WSJT_LIB_DESTINATION}
# PUBLIC_HEADER DESTINATION ${WSJT_INCLUDE_DESTINATION}/wsjtx
# )
# install (TARGETS wsjtx_udp-static EXPORT udp-static
# DESTINATION ${WSJT_LIB_DESTINATION}
# )
# install (EXPORT udp NAMESPACE wsjtx::
# DESTINATION ${WSJT_LIB_DESTINATION}/cmake/wsjtx
# )
# install (EXPORT udp-static NAMESPACE wsjtx::
# DESTINATION ${WSJT_LIB_DESTINATION}/cmake/wsjtx
# )
install (TARGETS udp_daemon message_aggregator
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
BUNDLE DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
)
install (TARGETS jt9 jt65code qra64code qra64sim jt9code jt4code wsprd msk32d msk32d_ldpc
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
BUNDLE DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
install (PROGRAMS
${RIGCTL_EXE}
DESTINATION ${WSJT_BIN_DESTINATION}
#COMPONENT runtime
RENAME rigctl-wsjtx${CMAKE_EXECUTABLE_SUFFIX}
)
install (PROGRAMS
${RIGCTLD_EXE}
DESTINATION ${WSJT_BIN_DESTINATION}
#COMPONENT runtime
RENAME rigctld-wsjtx${CMAKE_EXECUTABLE_SUFFIX}
)
install (FILES
README
COPYING
AUTHORS
THANKS
NEWS
INSTALL
BUGS
DESTINATION ${WSJT_SHARE_DESTINATION}/${WSJT_DOC_DESTINATION}
#COMPONENT runtime
)
install (FILES
contrib/Ephemeris/JPLEPH
contrib/LDPC/peg-128-80-reg3.gen
contrib/LDPC/peg-128-80-reg3.pchk
contrib/LDPC/peg-32-16-reg3.gen
contrib/LDPC/peg-32-16-reg3.pchk
DESTINATION ${WSJT_SHARE_DESTINATION}/${WSJT_DATA_DESTINATION}
#COMPONENT runtime
)
#
# Mac installer files
#
if (APPLE)
install (FILES
Darwin/ReadMe.txt
Darwin/sysctl.conf
DESTINATION .
#COMPONENT runtime
)
endif (APPLE)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# uninstall support
#
configure_file (
"${CMAKE_CURRENT_SOURCE_DIR}/CMake/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
@ONLY)
add_custom_target (uninstall
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
# creates svnversion.h using cmake script
add_custom_target (revisiontag
COMMAND ${CMAKE_COMMAND} -D SOURCE_DIR=${CMAKE_CURRENT_SOURCE_DIR} -D OUTPUT_DIR=${PROJECT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/CMake/getsvn.cmake
COMMENT "Generating Subversion revision information"
VERBATIM
)
# explicitly say that the wsjt_qt depends on custom target, this is
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# done indirectly so that the revisiontag target gets built exactly
# once per build
add_dependencies(wsjt_qt revisiontag)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# versioning and configuration
#
configure_file (
"${CMAKE_CURRENT_SOURCE_DIR}/wsjtx_config.h.in"
"${CMAKE_CURRENT_BINARY_DIR}/wsjtx_config.h"
)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (NOT WIN32 AND NOT APPLE)
# install a desktop file so wsjtx appears in the application start
# menu with an icon
install (
FILES wsjtx.desktop message_aggregator.desktop
DESTINATION share/applications
#COMPONENT runtime
)
install (
FILES icons/Unix/wsjtx_icon.png
DESTINATION share/pixmaps
#COMPONENT runtime
)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endif (NOT WIN32 AND NOT APPLE)
#
# bundle fixup only done in Release or MinSizeRel configurations
#
if (NOT is_debug_build)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
get_target_property (QtCore_location Qt5::Core LOCATION)
get_filename_component (QtCore_location ${QtCore_location} PATH)
list (APPEND fixup_library_dirs ${QtCore_location})
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (APPLE)
set (CMAKE_POSTFLIGHT_SCRIPT
"${wsjtx_BINARY_DIR}/postflight.sh")
set (CMAKE_POSTUPGRADE_SCRIPT
"${wsjtx_BINARY_DIR}/postupgrade.sh")
configure_file ("${wsjtx_SOURCE_DIR}/Darwin/postflight.sh.in"
"${CMAKE_POSTFLIGHT_SCRIPT}")
configure_file ("${wsjtx_SOURCE_DIR}/Darwin/postupgrade.sh.in"
"${CMAKE_POSTUPGRADE_SCRIPT}")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endif ()
if (APPLE OR WIN32)
# install rules for including 3rd party libs such as Qt
# install a qt.conf file
install (CODE "
get_filename_component (the_qt_conf \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\" REALPATH)
file (WRITE \"\${the_qt_conf}\"
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
\"[Paths]
\")
"
#COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
# if a system Qt is used (e.g. installed in /usr/lib/), it will not be included in the installation
set (fixup_exe "\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_BIN_DESTINATION}/${CMAKE_PROJECT_NAME}${CMAKE_EXECUTABLE_SUFFIX}")
#get_filename_component (hamlib_lib_dir ${hamlib_LIBRARIES} PATH)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
if (APPLE)
# install required Qt plugins
install (
DIRECTORY
${QT_PLUGINS_DIR}/platforms
${QT_PLUGINS_DIR}/audio
${QT_PLUGINS_DIR}/accessible
${QT_PLUGINS_DIR}/imageformats
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
DESTINATION ${WSJT_PLUGIN_DESTINATION}
CONFIGURATIONS Release MinSizeRel
#COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
)
# install (
# DIRECTORY
# ${QT_PLUGINS_DIR}/platforms
# ${QT_PLUGINS_DIR}/audio
# ${QT_PLUGINS_DIR}/accessible
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
# CONFIGURATIONS Debug
# #COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# FILES_MATCHING PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}"
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# )
# add plugins path for Mac Bundle
install (CODE "
get_filename_component (the_qt_conf \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\" REALPATH)
file (APPEND \"\${the_qt_conf}\"
\"Plugins = PlugIns
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
\")
"
#COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
endif (APPLE)
if (WIN32)
# DLL directory
#set (hamlib_lib_dir ${hamlib_lib_dir}/../bin)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
get_filename_component (fftw_lib_dir ${FFTW3F_LIBRARY} PATH)
list (APPEND fixup_library_dirs ${fftw_lib_dir})
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# install required Qt plugins
install (
DIRECTORY
${QT_PLUGINS_DIR}/platforms
${QT_PLUGINS_DIR}/accessible
${QT_PLUGINS_DIR}/audio
${QT_PLUGINS_DIR}/imageformats
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
DESTINATION ${WSJT_PLUGIN_DESTINATION}
CONFIGURATIONS Release MinSizeRel
#COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
)
# install (
# DIRECTORY
# ${QT_PLUGINS_DIR}/platforms
# ${QT_PLUGINS_DIR}/accessible
# ${QT_PLUGINS_DIR}/audio
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
# CONFIGURATIONS Debug
# #COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# FILES_MATCHING PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}"
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
# )
# add plugins path for WIN32
file (RELATIVE_PATH _plugins_path "${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}" "${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}")
install (CODE "
get_filename_component (the_qt_conf \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\" REALPATH)
file (APPEND \"\${the_qt_conf}\"
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
\"Plugins = ${_plugins_path}
\")
"
#COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
set (gp_tool "objdump") # we want MinGW tool - not MSVC (See GetPrerequisites.cmake)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endif (WIN32)
#list (APPEND fixup_library_dirs ${hamlib_lib_dir})
list (APPEND fixup_library_dirs ${hamlib_LIBRARY_DIRS})
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
install (CODE "
get_filename_component (the_path \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}\" REALPATH)
file (GLOB_RECURSE QTPLUGINS \"\${the_path}/*${CMAKE_SHARED_LIBRARY_SUFFIX}\")
set (CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMake/Modules ${CMAKE_MODULE_PATH})
include (BundleUtilities)
set (BU_CHMOD_BUNDLE_ITEMS ON)
set (gp_tool ${gp_tool})
# canonicalize path in install context
get_filename_component (the_exe ${fixup_exe} REALPATH)
fixup_bundle (\"\${the_exe}\" \"\${QTPLUGINS}\" \"${fixup_library_dirs}\")"
#COMPONENT runtime
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
)
endif (APPLE OR WIN32)
endif (NOT is_debug_build)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
#
# packaging
#
set (CPACK_MONOLITHIC_INSTALL 1)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
set (CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
set (CPACK_PACKAGE_VERSION_MAJOR ${WSJTX_VERSION_MAJOR})
set (CPACK_PACKAGE_VERSION_MINOR ${WSJTX_VERSION_MINOR})
set (CPACK_PACKAGE_VERSION_PATCH ${WSJTX_VERSION_PATCH})
if (WIN32)
set (CPACK_GENERATOR "NSIS")
elseif (APPLE)
set (CPACK_GENERATOR "DragNDrop")
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
else ()
find_program (DPKG_BUILDER dpkg-buildpackage DOC "Debian package builder")
if (DPKG_BUILDER)
#
# Derive the correct filename for a Debian package because the DEB
# generator doesn't do this correctly at present.
#
find_program (DPKG_PROGRAM dpkg DOC "dpkg program of Debian-based systems")
if (DPKG_PROGRAM)
execute_process (
COMMAND ${DPKG_PROGRAM} --print-architecture
OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
else (DPKG_PROGRAM)
set (CPACK_DEBIAN_PACKAGE_ARCHITECTURE noarch)
endif (DPKG_PROGRAM)
list (APPEND CPACK_GENERATOR "DEB")
endif (DPKG_BUILDER)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
find_program (RPMBUILDER rpmbuild DOC "RPM package builder")
if (RPMBUILDER)
list (APPEND CPACK_GENERATOR "RPM")
endif (RPMBUILDER)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
endif ()
set (CPACK_DEBIAN_PACKAGE_DESCRIPTION "${PROJECT_DESCRIPTION}")
set (CPACK_DEBIAN_PACKAGE_HOMEPAGE "${PROJECT_HOMEPAGE}")
set (CPACK_DEBIAN_PACKAGE_DEPENDS "libgfortran3 (>=4.8.2), libqt5serialport5 (>=5.2), libqt5multimedia5-plugins (>=5.2), libqt5widgets5 (>=5.2), libusb-1.0-0, libudev1, libc6 (>=2.19)")
set (CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
set (CPACK_RPM_PACKAGE_ARCHITECTURE ${CMAKE_SYSTEM_PROCESSOR})
set (CPACK_RPM_PACKAGE_REQUIRES "qt5-qtserialport >= 5.2, qt5-qtmultimedia >= 5.2, qt5-qtsvg, libusb, systemd-udev, glibc >= 2, libgfortran >= 4.8.2")
set (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION /usr/share/pixmaps /usr/share/applications /usr/share/man /usr/share/man1)
Added support for use of "Standard" locations for writable files. This allows writable files to be located in the "correct" location for each platform rather than in the directory of the executable which, in general, is not recommended or allowed in some cases. A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to switch be tween old and new functionality, currently it is on by default. It can be turned off by defining it to a false value (0) or more simply with cmake-gui setting the option with the same name. JTAlert can only work with the old non-standard file locations until Laurie VK3AMA chooses to support the new file locations. Even if the above is not enabled; the QSettings file is written to a user specific location so it will be shared by all instances of the program (i.e. across upgrades). See below for multiple concurrent instance support changes. Added a command line parser module for Fortran. Added 'lib/options.f90' to facilitate more complex argument passing to jt9 to cover explicit file locations. Changed the way multiple concurrent instances are handled. This is to allow the program to be run multiple times from the same installation directory. A new wsjtx command line optional argument is available "-r" or "--rig" which enables multiple concurrent instance support. The parameter of the new option is a unique name signifying a rig or equivalent. The name is used as the shared memory segment key and in window titles. The name is also used to access unique settings files and writable data files like ALL.TXT and log files. No attempt has been made to share these files between concurrent instances. If "-r" or "--rig" is used without a parameter it still enables multiple concurrent instance support for that instance. All instances must use a unique parameter, one of which may be empty. The rig name is appended the QCoreApplication::applicationName() for convenient usage like window titles. Set non Qt locale to "C". This ensures that C library functions give consistent results whatever the system locale is set to. QApplication follows the system locale as before. Thus using QApplication and its descendants like widgets and QString for all user visible formating will give correct l10n and using C/C++ library will give consistent formatting across locales. Added top level C++ exception handling to main.cpp. Because the new transceiver framework uses exceptions internally, the main function now handles any exceptions that aren't caught. Retired devsetup, replaced with Configuration. Configuration is a class that encapsulates most of the configuration behavior. Because rig configuration is so closely coupled with rig operation, Configuration serves as a proxy for access to the rig control functions. See Configuration.hpp for more details of the Configuration interface. Menu changes. Various checkable menu actions moved from main menu to the Configuration dialog. The whole settings menu has been retired with the single "Settings..." action moved to the file menu for consistency on Mac where it appears as "Preferences" in line with Mac guidelines. New data models for data used by the application. ADIF amateur band parameters, free text message macros, spot working frequencies and, station information (station descriptions and transverter offsets per band) each implement the QAbstractItemModel interface allowing them to be used directly with Qt view widgets (Bands.hpp, FrequencyList.hpp and, StationList.hpp). Configuration manages maintenance of an instance of all but the former of the above models. The ADIF band model is owned by Configuration but requires no user maintenance as it is immutable. Band combo box gets more functionality. This widget is now an editable QComboBox with some extra input capabilities. The popup list is still the list of spot working frequencies, now showing the actual frequency decorated with the band name. This allows multiple spot frequencies on a band if required. The line edit allows direct frequency entry in mega-Hertz with a completer built in to suggest the available spot working frequencies. It also allows band name entry where the first available spot working frequency is selected. Recognized band names are those that are defined by the ADIF specification and can be found in in the implementation of the ADIF bands model (Bands.cpp). If an out of band frequency is chosen, the line edit shows a warning red background and the text "OOB". Out of band is only defined by the ADIF band limits which in general are wider than any entities regulations. Qt 5.2 now supports default audio i/p and o/p devices. These devices are placeholders for whatever the user defines as the default device. Because of this they need special treatment as the actual device used is chosen at open time behind the scenes. Close-down behavior is simplified. The close-down semantics were broken such that some objects were not being shut down cleanly, this required amendments to facilitate correct close down of threads. User font selection added to Configuration UI. Buttons to set the application font and the font for the band and Rx frequency activity widgets have been added to the Configuration UI to replace the file based font size control. Free text macros now selected directly. The free text line edit widgets are now editable combo boxes that have the current free text macro definitions as their popup list. The old context menu to do this has been retired. Astronomical data window dynamically formatted and has font a chooser. This window is now autonomous, has its own font chooser and, dynamically resizes to cover the contents. Double click to Tx enabled now has its own widget in the status bar. QDir used for portable path and file name handling throughout. The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now checkable. Being checkable allows these buttons control their own state and rendering. Calls to PSK Reporter interface simplified. In mainwindow.cpp the calls to this interface are rationalized to just 3 locations. Manipulation of ALL.TXT simplified. Moved, where possible, to common functions. Elevated frequency types to be Qt types. Frequency and FrequencyDelta defined as Qt types in their meta-type system (Radio.hpp). They are integral types for maximum accuracy. Re-factored rig control calls in mainwindow.cpp. The new Configuration proxy access to rig control required many changes (mostly simplifications) to the MainWindow rig control code. Some common code has been gathered in member functions like qsy(), monitor(), band_changed() and auto_tx_mode(). Rig control enhancements. The rig control for clients interface is declared as an abstract interface (See Transceiver.hpp). Concrete implementations of this interface are provided for the Hamlib rig control library, DX Lab Suite Commander via a TCP/IP command channel, Ham Radio Deluxe also via a TCP/IP command channel and, OmniRig via its Windows COM server interface. Concrete Transceiver implementations are expected to be moved to a separate thread after construction since many operations are blocking and not suitable for running in a GUI thread. To facilitate this all instantiation of concrete Transceiver instances are handled by Configuration using a factory class (TransceiverFactory) for configuration parameter based instantiation. Various common functionality shared by different rig interface implementations are factored out into helper base classes that implement or delegate parts of the Transceiver interface. They are TransceiverBase which caches state to minimize expensive rig commands, it also maps the Transceiver interface into a more convenient form for implementation (template methods). PollingTransceiver that provides a state polling mechanism that only reports actual changes. EmulateSplitTransceiver that provides split operation by QSYing on PTT state changes. EmulateSplitTransceiver can be used with any implementation as it follows the GoF Decorator pattern and can wrap any Transceiver implementation. OmniRigTransceiver is derived directly from TransceiverBase since it doesn't require polling due to its asynchronous nature. OmniRigTransceiver is only built on Windows as it is a COM server client. To build it you must first install the OmniRig client on the development machine (http://www.dxatlas.com/omnirig/). DXLabSuiteCommanderTransceiver derives from PollingTransceiver since it is a synchronous communications channel. No third party library is required for this interface. HRDTransceiver also derives from PollingTransceiver. The HRD interface library has been reverse engineered to provide functionality with all available versions of HRD. No third party libraries are required. HamlibTransceiver likewise derives from PollingTransceiver since the Hamlib asynchronous interface is non-functional. Although this class will interface with the release version of Hamlib (1.2.15.3); for correct operation on most rigs it needs to run with the latest master branch code of Hamlib. During development many changes to Hamlib have been submitted and accepted, hence this requirement. Hamlib source can be obtained from git://git.code.sf.net/p/hamlib/code and at the time of writing he master branch was at SHA 6e4432. The Hamlib interface directly calls the "C" interface and the modified rigclass.{h,cpp} files have been retired. There is a rig type selection of "None" which may be used for non-CAT rigs, this is actually a connection to the dummy Hamlib device. PollingTransvceiver derives from TransceiverBase and TransceiverBase derives from the Transceiver interface. Each interface implementation offers some possibility of PTT control via a different serial port than the CAT port. We also support PTT control directly via a second serial port. This is done by delegating to a dummy Hamlib instance which is only used for PTT control. This means that DXLabSuiteCommanderTransceiver, HRDTransceiver and OmniRigTransceiver always wrap a dummy HamlibTransceiver instance. The factory class TransceiverFactory manages all these constructional complexities. Serial port selection combo boxes are now editable with a manually entered value being saved to the settings file. This allows a non-standard port device to be used without having to edit the settings file manually. For TCP/IP network CAT interfaces; the network address and port may be specified allowing the target device to be located on a different machine from the one running wsjtx if required. The default used when the address field is left blank is the correct one for normal usage on the local host. Selecting a polling interval of zero is no longer possible, this is because the rig control capability can no longer support one way connection. This is in line with most other CAT control software. In the Configuration dialog there are options to select split mode control by the software and mode control by the software. For the former "None", "Rig" and "Fake it" are available, for the latter "None", "USB" and, "Data" are available. Because tone generation is implicitly linked to split mode operation; it is no longer possible to have the software in split mode and the rig not or vice versa. This may mean some rigs cannot be used in split mode and therefore not in dual JT65+JT9 until issues with CAT control with that rig are resolved. Single mode with VOX keying and no CAT control are still possible so even the most basic transceiver setup is supported as before. Configuration now supports a frequency offset suitable for transverter operation. The station details model (StationList.hpp) includes a column to store an offset for each band if required. CMake build script improvements. The CMakeLists.txt from the 'lib' directory has been retired with its contents merged into the top level CMakeLists.txt. Install target support has been greatly improved with the Release build configuration now building a fully standalone installation on Mac and Windows. The Debug configuration still builds an installation that has environment dependencies for external libraries, which is desirable for testing and debugging. Package target support is largely complete for Mac, Windows and, Linux, it should be possible to build release installers directly from CMake/CPack. Cmake FindXXXX.cmake modules have been added to improve the location of fftw-3 and Hamlib packages. Version numbers are now stored in Versions.cmake and work in concert with automatic svn revision lookup during build. The version string becomes 'rlocal'± if there are any uncommitted changes in the build source tree. Moved resource like files to Qt resources. Because location of resource files (when they cannot go into the installation directory because of packaging rules) is hard to standardize. I have used the Qt resource system for all ancillary data files. Some like kvasd.dat are dumped out to the temp (working directory) because they are accessed by an external program, others like the audio samples are copied out so they appear in the data directory under the default save directory. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 09:21:00 -04:00
configure_file ("${PROJECT_SOURCE_DIR}/CMakeCPackOptions.cmake.in"
"${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake" @ONLY)
set (CPACK_PROJECT_CONFIG_FILE "${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake")
include (CPack)