WSJT-X/lib/ft8/foxgen.f90

149 lines
4.1 KiB
Fortran
Raw Normal View History

subroutine foxgen()
! Called from MainWindow::foxTxSequencer() to generate the Tx waveform in
! FT8 Fox mode. The Tx message can contain up to 5 "slots", each carrying
! its own FT8 signal.
! Encoded messages can be of the form "HoundCall FoxCall rpt" (a standard FT8
! message with i3bit=0) or "HoundCall_1 RR73; HoundCall_2 <FoxCall> rpt",
! a new message type with i3bit=1. The waveform is generated with
! fsample=48000 Hz; it is compressed to reduce the PEP-to-average power ratio,
! with (currently disabled) filtering afterware to reduce spectral growth.
! Input message information is provided in character array cmsg(5), in
! common/foxcom/. The generated wave(NWAVE) is passed back in the same
! common block.
use crc
parameter (NN=79,ND=58,KK=87,NSPS=4*1920)
parameter (NWAVE=NN*NSPS,NFFT=614400,NH=NFFT/2)
character*40 cmsg
character*22 msg,msgsent
character*6 mygrid
character*87 cbits
character*88 cb88
logical bcontest
integer itone(NN)
integer icos7(0:6)
integer*1 msgbits(KK),codeword(3*ND),msgbits2
integer*1, target:: i1Msg8BitBytes(11)
integer*1, target:: mycall
real x(NFFT)
real*8 dt,twopi,f0,fstep,dfreq,phi,dphi
complex cx(0:NH)
common/foxcom/wave(NWAVE),nslots,nfreq,i3bit(5),cmsg(5),mycall(12)
common/foxcom2/itone2(NN),msgbits2(KK)
equivalence (x,cx),(y,cy)
data icos7/2,5,6,0,4,1,3/ !Costas 7x7 tone pattern
bcontest=.false.
fstep=60.d0
dfreq=6.25d0
dt=1.d0/48000.d0
twopi=8.d0*atan(1.d0)
mygrid=' '
irpt=0
nplot=0
wave=0.
do n=1,nslots
i3b=i3bit(n)
if(i3b.eq.0) then
msg=cmsg(n)(1:22) !Standard FT8 message
else
i1=index(cmsg(n),' ') !Special Fox message
i2=index(cmsg(n),';')
i3=index(cmsg(n),'<')
i4=index(cmsg(n),'>')
msg=cmsg(n)(1:i1)//cmsg(n)(i2+1:i3-2)//' '
read(cmsg(n)(i4+2:i4+4),*) irpt
endif
call genft8(msg,mygrid,bcontest,0,1,msgsent,msgbits,itone)
! print*,'Foxgen:',n,cmsg(n),msgsent
if(i3b.eq.1) then
icrc10=crc10(c_loc(mycall),12)
nrpt=irpt+30
write(cbits,1001) msgbits(1:56),icrc10,nrpt,i3b,0
1001 format(56b1.1,b10.10,b6.6,b3.3,b12.12)
read(cbits,1002) msgbits
1002 format(87i1)
cb88=cbits//'0'
read(cb88,1003) i1Msg8BitBytes(1:11)
1003 format(11b8)
icrc12=crc12(c_loc(i1Msg8BitBytes),11)
write(cbits,1001) msgbits(1:56),icrc10,nrpt,i3b,icrc12
read(cbits,1002) msgbits
call encode174(msgbits,codeword) !Encode the test message
! Message structure: S7 D29 S7 D29 S7
itone(1:7)=icos7
itone(36+1:36+7)=icos7
itone(NN-6:NN)=icos7
k=7
do j=1,ND
i=3*j -2
k=k+1
if(j.eq.30) k=k+7
itone(k)=codeword(i)*4 + codeword(i+1)*2 + codeword(i+2)
enddo
endif
! Make copies of itone() and msgbits() for ft8sim
itone2=itone
msgbits2=msgbits
f0=nfreq + fstep*(n-1)
phi=0.d0
k=0
do j=1,NN
f=f0 + dfreq*itone(j)
dphi=twopi*f*dt
do ii=1,NSPS
k=k+1
phi=phi+dphi
xphi=phi
wave(k)=wave(k)+sin(xphi)
enddo
enddo
enddo
kz=k
peak1=maxval(abs(wave))
wave=wave/peak1
! call plotspec(1,wave) !Plot the spectrum
! Apply compression
! rms=sqrt(dot_product(wave,wave)/kz)
! wave=wave/rms
! do i=1,NWAVE
! wave(i)=h1(wave(i))
! enddo
! peak2=maxval(abs(wave))
! wave=wave/peak2
! call plotspec(2,wave) !Plot the spectrum
width=50.0
call foxfilt(nslots,nfreq,width,wave)
peak3=maxval(abs(wave))
wave=wave/peak3
! nadd=1000
! j=0
! do i=1,NWAVE,nadd
! sx=dot_product(wave(i:i+nadd-1),wave(i:i+nadd-1))
! j=j+1
! write(30,3001) j,sx/nadd
!3001 format(i8,f12.6)
! enddo
! call plotspec(3,wave) !Plot the spectrum
return
end subroutine foxgen
! include 'plotspec.f90'