WSJT-X/doc/source/configuration-main-window.adoc

// Status=review
To set the proper level of audio drive from _WSJT-X_ to your radio:

* Click the *Tune* button on the main screen._WSJT-X_ to switch the
radio into transmit mode and generate a steady audio tone. 

* Listen to the generated audio tone using your radio’s Monitor
facility. The tone should be perfectly smooth, with no clicks or
glitches.

* Open the computer’s audio mixer controls for output (“Playback”)
devices and adjust the volume slider downward from its maximum until
the RF output from your transmitter falls by around ten percent.  This
will be a good level for audio drive.

* Alternatively, you can make the same adjustment using the digital
slider labeled *Pwr* at the right edge of the main window.

* Toggle the *Tune* button once more to stop your test transmission.
-												Split the asciidoc source for WSJT-X User's Guide into many
smaller files, by section and sub-section.  

Also extensive editing up through section 7.  Sections 6.2, 8, and
beyond definitely need work.  Other polishing is also desirable, and
maybe also some additions and/or changes.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3656 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-23 15:12:12 -05:00
+								// Status=review
-												Another round of extensive edits to the WSJT-X User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3658 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-24 15:09:47 -05:00
+								To set the proper level of audio drive from _WSJT-X_ to your radio:
-												Split the asciidoc source for WSJT-X User's Guide into many
smaller files, by section and sub-section.  

Also extensive editing up through section 7.  Sections 6.2, 8, and
beyond definitely need work.  Other polishing is also desirable, and
maybe also some additions and/or changes.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3656 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-23 15:12:12 -05:00
-												Another round of extensive edits to the WSJT-X User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3658 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-24 15:09:47 -05:00
+								* Click the *Tune* button on the main screen._WSJT-X_ to switch the
 								radio into transmit mode and generate a steady audio tone.
-												Split the asciidoc source for WSJT-X User's Guide into many
smaller files, by section and sub-section.  

Also extensive editing up through section 7.  Sections 6.2, 8, and
beyond definitely need work.  Other polishing is also desirable, and
maybe also some additions and/or changes.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3656 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-23 15:12:12 -05:00
 								* Listen to the generated audio tone using your radio’s Monitor
 								facility. The tone should be perfectly smooth, with no clicks or
 								glitches.
-												Another round of extensive edits to the WSJT-X User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3658 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-24 15:09:47 -05:00
+								* Open the computer’s audio mixer controls for output (“Playback”)
 								devices and adjust the volume slider downward from its maximum until
 								the RF output from your transmitter falls by around ten percent.  This
 								will be a good level for audio drive.
-												Split the asciidoc source for WSJT-X User's Guide into many
smaller files, by section and sub-section.  

Also extensive editing up through section 7.  Sections 6.2, 8, and
beyond definitely need work.  Other polishing is also desirable, and
maybe also some additions and/or changes.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3656 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-23 15:12:12 -05:00
 								* Alternatively, you can make the same adjustment using the digital
 								slider labeled *Pwr* at the right edge of the main window.
-												Another round of extensive edits to the WSJT-X User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3658 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

											
										
										
											2014-01-24 15:09:47 -05:00
+								* Toggle the *Tune* button once more to stop your test transmission.