diff --git a/doc/user_guide/en/settings-advanced.adoc b/doc/user_guide/en/settings-advanced.adoc
index c7e9b7e97..5338c9019 100644
--- a/doc/user_guide/en/settings-advanced.adoc
+++ b/doc/user_guide/en/settings-advanced.adoc
@@ -8,20 +8,20 @@ numbers give slightly better sensitivity but take longer.  For most
 purposes a good setting is 6 or 7.
 
 - *Aggressive decoding level* sets the threshold for acceptable
-decodes using Deep Search.  Higher numbers will display more results 
-with relatively low confidence levels.
+decodes using Deep Search.  Higher numbers will display results 
+with lower confidence levels.
 
-- Check the *Two-pass decoding* box to enable a second decoding pass
-after signals producing first-pass decodes have been subtracted
-from the received data.
+- Check *Two-pass decoding* to enable a second decoding pass after
+signals producing first-pass decodes have been subtracted from the
+received data stream.
 
 _Miscellaneous_
 
-- Set a positive number for *Degrade S/N of .wav file* to add known
-amounts of pseudo-random noise to data read from a .wav file
-previously saved by _WSJT_ or _WSJT-X_.  To ensure that the resulting
-S/N degradation is close to that requested, set *Receiver bandwidth* to
-your best estimate of the receiver's effective noise bandwidth.
+- Set a positive number in *Degrade S/N of .wav file* to add known
+amounts of pseudo-random noise to data read from a .wav file.  To
+ensure that the resulting S/N degradation is close to the requested
+number of dB, set *Receiver bandwidth* to your best estimate of the
+receiver's effective noise bandwidth.
 
 - Set *Tx delay* to a number larger than the default 0.2 s to create
 a larger delay between execution of a command to enable PTT and onset
@@ -31,7 +31,7 @@ IMPORTANT: For the health of your T/R relays and external
 preamplifier, we strongly recommend using a hardware sequencer and
 testing to make sure that sequencing is correct.
 
-- Check the box *x 2 Tone spacing* to generate Tx audio with twice the
-normal tone spacing.  This feature is intended for use with specialized
-LF/MF transmitters that divide the audio waveform by 2 before further
+- Check *x 2 Tone spacing* to generate Tx audio with twice the normal
+tone spacing.  This feature is intended for use with specialized LF/MF
+transmitters that divide the audio waveform by 2 before further
 processing.