Update building Boost recipe

This commit is contained in:
Bill Somerville 2020-10-02 03:00:21 +01:00
parent 69c48b0997
commit 58d4c684ce
No known key found for this signature in database
GPG Key ID: D864B06D1E81618F

View File

@ -1,15 +1,22 @@
Linux
=====
Debian style:
sudo apt install libboost-all-dev
RPM style:
sudo dnf install boost-devel
macOS
=====
Download the latest Boost sources from here: boost.org
Currently v 1.74.0 - https://dl.bintray.com/boostorg/release/1.74.0/source/boost_1_74_0.tar.bz2
Currently v 1.74.0 -
https://dl.bintray.com/boostorg/release/1.74.0/source/boost_1_74_0.tar.bz2
cd ~/Downloads
curl -L -O https://dl.bintray.com/boostorg/release/1.74.0/source/boost_1_74_0.tar.bz2
@ -26,7 +33,8 @@ cd ../..
linkflags=-mmacosx-version-min=10.12 \
architecture=x86 address-model=64 --prefix=$HOME/local/boost install
That will take a while, once successful (warnings can be ignored) you can clean the build tree to save some space:
That will take a while, once successful (warnings can be ignored) you
can clean the build tree to save some space:
~/local/boost-build/bin/b2 toolset=clang cflags=-mmacosx-version-min=10.12 \
cxxflags=-mmacosx-version-min=10.12 mflags=-mmacosx-version-min=10.12 \
@ -34,7 +42,10 @@ That will take a while, once successful (warnings can be ignored) you can clean
linkflags=-mmacosx-version-min=10.12 \
architecture=x86 address-model=64 --prefix=$HOME/local/boost clean
All that remains is to reconfigure your WSJT-X build trees to include ~/local/boost in your CMAKE_PREFIX_PATH, maybe something like these (one each for Debug and Release configuration builds and assumes the Macports GCC v7 tool-chain is being used):
All that remains is to reconfigure your WSJT-X build trees to include
~/local/boost in your CMAKE_PREFIX_PATH, maybe something like these
(one each for Debug and Release configuration builds and assumes the
Macports GCC v7 tool-chain is being used):
FC=gfortran-mp-7 \
cmake \
@ -54,7 +65,8 @@ FC=gfortran-mp-7 \
-B ~/build/wsjtx-debug \
~/src/bitbucket.org/k1jt/wsjtx
Substitute you installed SDK version, Qt version and location, and Hamlib install locations.
Substitute you installed SDK version, Qt version and location, and
Hamlib install locations.
MS Windows
@ -72,7 +84,7 @@ writing that was
https://dl.bintray.com/boostorg/release/1.74.0/source/boost_1_74_0.7z
. Extract to some convenient location, I use %HOME%\src .
Download and extract the libbacktrace sources from
Download and extract the libbacktrace sources from
https://github.com/ianlancetaylor/libbacktrace as follows.
cd %HOME%\src
@ -82,16 +94,16 @@ mkdir ianlancetaylor
cd ianlancetaylor
git clone git@github.com:ianlancetaylor/libbacktrace.git
I install third-party tools under the C:\Tools directory, the
I install third-party tools under the C:\Tools directory, the
following assumes that, adjust to taste. Note that it is OK to install
both 32- and 64-bit builds of Boost to the same path as the library
names are unique per architecture and tool-chain. This saves a lot of
space as the boost header files are quite big, and there's no need to
both 32- and 64-bit builds of Boost to the same path as the library
names are unique per architecture and tool-chain. This saves a lot of
space as the boost header files are quite big, and there's no need to
install multiple copies.
Create a new file %HOME%\src\boost_1_74_0\project-config.jam with the
following three lines to specify how Boost.Build finds the libbacktrace
library matched to your relevant C++ compliers:
Create a new file %HOME%\src\boost_1_74_0\project-config.jam with the
following three lines to specify how Boost.Build finds the
libbacktrace library matched to your relevant C++ compliers:
import toolset ;
@ -99,16 +111,16 @@ using gcc : : C:\\Qt\\Tools\\mingw730_32\\bin\\g++ : <compileflags>-I"C:\\Tools\
using gcc : 8~64 : C:\\Qt\\Tools\\mingw810_64\\bin\\g++ : <compileflags>-I"C:\\Tools\\libbacktrace-1.0\\MinGW64\\include" <linkflags>-L"C:\\Tools\\libbacktrace-1.0\\MinGW64\\lib" ;
Note that it may need some local adjustment of the C++ compiler
version and path depending on the exact tool-chains from your Qt
installation. Above I am using the Qt v5.12.9 MinGW32 v7 tool-chain
for 32-bit (toolset=gcc), and Qt v5.15.0 MinGW64 v8 tool-chain
for 64-bit (toolchain=gcc-8~64).
Note that it may need some local adjustment of the C++ compiler
version and path depending on the exact tool-chains from your Qt
installation. Above I am using the Qt v5.12.9 MinGW32 v7 tool-chain
for 32-bit (toolset=gcc), and Qt v5.15.0 MinGW64 v8 tool-chain for
64-bit (toolchain=gcc-8~64).
32-bit
------
Start an MSys or MSys2 shell with the 32-bit C/C++ tool-chain from
Start an MSys or MSys2 shell with the 32-bit C/C++ tool-chain from
your Qt installation on the PATH environment variable.
cd ~/src/github.com/ianlancetaylor/libbacktrace
@ -116,8 +128,8 @@ cd ~/src/github.com/ianlancetaylor/libbacktrace
make && make install
make clean
Start a CMD window suitably configured for use of the 32-bit MinGW
tool-chain bundled with your Qt binary installation. Verify the
Start a CMD window suitably configured for use of the 32-bit MinGW
tool-chain bundled with your Qt binary installation. Verify the
correct compiler is in the PATH. i.e. it identifies (g++ --version) as
i686-posix-dwarf-rev0.
@ -129,7 +141,7 @@ C:\Tools\boost-build\MinGW32\bin\b2 -j8 toolset=gcc ^
--build-dir=%HOME%\build\boost ^
--build-type=complete --prefix=C:\Tools\boost install
If all is well you should see the following line about a 1/3 of the
If all is well you should see the following line about a 1/3 of the
way through the initial configuration steps.
- libbacktrace builds : yes
@ -140,7 +152,7 @@ After some time it should complete with something like:
...skipped 1112 targets...
...updated 3924 targets...
warnings can usually be ignored. If successful; you can release some
warnings can usually be ignored. If successful; you can release some
space by cleaning the build tree:
C:\Tools\boost-build\MinGW32\bin\b2 toolset=gcc ^
@ -150,7 +162,7 @@ C:\Tools\boost-build\MinGW32\bin\b2 toolset=gcc ^
64-bit
======
Start an MSys or MSys2 shell with the 64-bit C/C++ tool-chain from
Start an MSys or MSys2 shell with the 64-bit C/C++ tool-chain from
your Qt installation on the PATH environment variable.
cd ~/src/github.com/ianlancetaylor/libbacktrace
@ -158,13 +170,13 @@ cd ~/src/github.com/ianlancetaylor/libbacktrace
make && make install
make clean
Start a CMD window suitably configured for use of the 64-bit MinGW
tool-chain bundled with your Qt binary installation. Verify the
Start a CMD window suitably configured for use of the 64-bit MinGW
tool-chain bundled with your Qt binary installation. Verify the
correct compiler is in the PATH. i.e. it identifies (g++ --version) as
x86_64-posix-seh-rev0. Note the toolchain specified must match your
x86_64-posix-seh-rev0. Note the toolchain specified must match your
compilers and the project-config.jam file you created above. With a v7
64-bit C++ compiler use gcc-7~64, with a v8 64-bit C++ compiler use
gcc-8~64. My example matches my 64-bit Qt v5.15.0 with the bundled
64-bit C++ compiler use gcc-7~64, with a v8 64-bit C++ compiler use
gcc-8~64. My example matches my 64-bit Qt v5.15.0 with the bundled
MinGW64 v8.1.0.
cd %HOME%\src\boost_1_74_0\tools\build
@ -186,18 +198,28 @@ After some time it should complete with something like:
...skipped 32 targets...
...updated 3648 targets...
warnings can usually be ignored. If successful; you can release some
warnings can usually be ignored. If successful; you can release some
space by cleaning the build tree:
C:\Tools\boost-build\MinGW32\bin\b2 toolset=gcc-8~64 ^
address-model=64 --build-dir=%HOME%\build\boost ^
--build-type=complete clean
Run-time Environment
--------------------
You will need to add C:\Tools\boost\lib to your PATH environment
variable in order to run installed Debug configurations of WSJT-X, or
to execute build artefacts from a build tree. It is also needed for
teh install target of release configuration builds. Installed Release
configurations will move any required DLLs to the installation bin
directory automatically.
Setting up WSJT-X builds
------------------------
All that remains is to add C:\Tools\boost\ to your 32- and 64-bit
build configurations CMAKE_PREFIX_PATH variables. I use tool-chain
All that remains is to add C:\Tools\boost\ to your 32- and 64-bit
build configurations CMAKE_PREFIX_PATH variables. I use tool-chain
files for my WSJT-X builds on Windows, an extract from my 32-bit Debug
configuration tool-chain file:
@ -216,12 +238,3 @@ set (ASCIIDOCDIR C:/Tools/asciidoc-master)
set (CMAKE_PREFIX_PATH ${BOOSTDIR} ${QTDIR} ${FFTWDIR} ${HAMLIBDIR} ${HAMLIBDIR}/bin ${LIBUSBDIR} ${PYTHONDIR} ${ASCIIDOCDIR})
# ...
Run-time Environment
--------------------
You will need to add C:\Tools\boost\lib to your PATH environment
variable in order to run installed Debug configurations of WSJT-X, or
to execute build artefacts from a build tree. Installed Release
configurations will move any required DLLs to the installation bin
directory automatically.