Working toward implementing JT9 decoder in WSJT-X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2663 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

jt9.txt

@@ -10,25 +10,25 @@ used for synchronization, so a transmission requires a total of 207/3
 Exact symbol lengths are chosen so that nsps, the number of samples
 per symbol (at 12000 samples per second) is a number with no prime
 factor greater than 7.  This choice makes for efficient FFTs.  Tone
-spacing of the 9-FSK modulation is df=1/tsym=12000/nsps, the same as
+spacing of the 9-FSK modulation is df=1/tsym=12000/nsps, equal to
 the keying rate.  The total occupied bandwidth is 9*df.
 
 Parameters of five JT9 sub-modes are summarized in the following
 table, along with S/N thresholds measured by simulation on an AWGN
 channel.
 
--------------------------------------------------------------------------
+--------------------------------------------------------------------------
 Mode     nsps nsps2  df    tsym  BW   S/N*   Tdec Tfree Factors 
-        12000  1500  (Hz)   (s)  (Hz)   (dB)   (s)    (s)    of nsps
+        12000  1500 (Hz)   (s)  (Hz)  (dB)   (s)   (s)  of nsps      nfft3
--------------------------------------------------------------------------
+--------------------------------------------------------------------------
-JT9-1    6912   864  1.736  0.58 15.6  -26.9   52.5   7.5   2^8 3^3
+JT9-1    6912   864 1.736  0.58 15.6 -26.9   52.5  7.5 2^8 3^3        1024
-JT9-2   15360  1920  0.781  1.28  7.0  -30.2  112.3   7.7   2^10 3 5
+JT9-2   15360  1920 0.781  1.28  7.0 -30.2  112.3  7.7 2^10 3 5       2048
-JT9-5   40960  5120  0.293  3.41  2.6  -34.4  293.6   6.4   2^13 5
+JT9-5   40960  5120 0.293  3.41  2.6 -34.4  293.6  6.4 2^13 5         6144
-JT9-10  82944 10368  0.145  6.91  1.3  -37.5  591.0   9.0   2^10 3^4
+JT9-10  82944 10368 0.145  6.91  1.3 -37.5  591.0  9.0 2^10 3^4      12288
-JT9-30 252000 31500  0.048 21.00  0.4  -42.3 1788.5  11.5   2^5 3^2 5^3 7
+JT9-30 252000 31500 0.048 21.00  0.4 -42.3 1788.5 11.5 2^5 3^2 5^3 7 32768
--------------------------------------------------------------------------
+--------------------------------------------------------------------------
 * Noise power measured in a 2500 Hz bandwidth.
-
+NB: nfft3 might be doubled and used with a sin^2 window.
 
 Transmitting
 ------------
@@ -37,27 +37,27 @@ Transmitting
 3. Interleave to scramble the bit order
 4. Assemble 3-bit groups to make (206+1)/3 = 69 symbols
 5. Gray-code the symbol values
-6. Insert 16 sync symbols ==> 69+15=81 channel symbols, values 0-8
+6. Insert 16 sync symbols ==> 69+16=85 channel symbols, values 0-8
 
 
 Receiving
 ---------
 1.  Apply noise blanking with the timf2 method
 2.  Filter to 1000 Hz bandwidth and downsample (1/8) to 1500 Hz, saving
-    complex data to array c0(1350000).  (use FIR?  NFFT2/NFFT2A?)
+    complex data to array c0(2,700,000).
-3.  Compute symbol-length spectra at half-symbol steps.  Use for
+3.  Compute spectra at half-symbol steps.  Use for waterfall display 
-    waterfall display s(22000) and save in ss(184,22000) and 
+    s(22000) and save in ss(184,22000) and 
     savg(22000), for detecting sync vectors.
-4.  At time Tdec, find sync vectors in ss(); get estimates of DF, DT
+4.  At time Tdec, find sync vectors in ss(); get approx DF or list of DFs
 5.  Do full-length FFT, NFFT1=96*nsps2, zero-padded as required.
-6.  For each candidate signal, do inverse FFT of length 1536.  This 
+6.  For each candidate signal, do inverse FFT of length 1536 (or 3072?).  
-    yields 16 complex samples per symbol, and sync tone should be 
+    This yields 16 complex samples per symbol, and sync tone should be 
     close to zero frequency.
 7.  Use afc65b method to get improved values of DF, DT.
 8.  Tweak freq and time offset to 0.
-9.  Compute 8-bin spectra of 69 data symbols: s2(8,69).  Re-order bins
+9.  Compute 8-bin spectra of 69 data symbols: ssym(0:7,69).  Re-order the
-    by removing Gray code.
+    bins to remove Gray code.
-10. Compute soft symbols for 206 bits.
+10. Compute soft symbols for 206 bits (bit 207 is always 0).
 11. Remove interleaving
 12. Pack bits into bytes, send to Fano decoder
 13. If Fano succeeds, remove source encoding and display user message.

lib/jt9.f90

@@ -11,7 +11,7 @@ program jt9
   parameter (NSMAX=22000)            !Max length of saved spectra
   integer*4 ihdr(11)
   real*4 s(NSMAX)
-  real*4 ccfred(NSMAX)
+  real*4 red(NSMAX)
   logical*1 lstrong(0:1023)
   integer*1 i1SoftSymbols(207)
   character*22 msg
@@ -83,7 +83,7 @@ program jt9
         if(nhsym.ge.1 .and. nhsym.ne.nhsym0) then
 ! Emit signal readyForFFT
            call symspec(k,ntrperiod,nsps,ndiskdat,nb,nbslider,pxdb,   &
-                s,f0a,df3,ihsym,nzap,slimit,lstrong)
+                s,red,f0a,df3,ihsym,nzap,slimit,lstrong)
            nhsym0=nhsym
            if(ihsym.ge.184) go to 10
         endif
@@ -99,13 +99,13 @@ program jt9
      nfqso=1500
 
 ! Get sync, approx freq
-     call sync9(ss,tstep,f0a,df3,ntol,nfqso,sync,fpk,ccfred)    
+     call sync9(ss,tstep,f0a,df3,ntol,nfqso,sync,fpk,red)    
      fpk0=fpk
      iz=1000.0/df3
      do i=1,iz
         freq=1000.0 + (i-1)*df3
-        write(72,3001) freq,ccfred(i)
+        write(72,3001) freq,red(i),db(red(i))
-3001    format(2f10.3)
+3001    format(3f10.3)
      enddo
      flush(72)
 

lib/redsync.f90

@@ -0,0 +1,44 @@
+subroutine redsync(ss,ntrperiod,ihsym,iz,red)
+
+  Parameter (NSMAX=22000)
+  real*4 ss(184,NSMAX)
+  real*4 red(NSMAX)
+  integer ii(16)                     !Locations of sync half-symbols
+  data ii/1,11,21,31,41,51,61,77,89,101,113,125,137,149,161,169/
+
+  lagmax=9
+  if(ntrperiod.eq.2) lagmax=5
+  if(ntrperiod.eq.5) lagmax=2
+  if(ntrperiod.eq.10) lagmax=1
+  if(ntrperiod.eq.30) lagmax=1
+
+  do i=1,iz
+     smax=0.
+     do lag=-lagmax,lagmax
+        sig=0.
+        ns=0
+        ref=0.
+        nr=0
+        do j=1,16
+           k=ii(j)+lag
+           if(k.ge.1 .and. k.le.ihsym) then
+              sig=sig + ss(k,i)
+              ns=ns+1
+           endif
+           do n=k+2,k+8,2
+              if(n.ge.1 .and. n.le.ihsym) then
+                 ref=ref + ss(n,i)
+                 nr=nr+1
+              endif
+           enddo
+        enddo
+        s=0.
+        if(ref.gt.0.0) s=(sig/ns)/(ref/nr)
+        if(s.gt.smax) smax=s
+     enddo
+     red(i)=db(smax)
+  enddo
+
+  return
+end subroutine redsync
+        

lib/symspec.f90

@@ -1,5 +1,5 @@
-subroutine symspec(k,ntrperiod,nsps,ndiskdat,nb,nbslider,pxdb,s,f0a,df3,    &
+subroutine symspec(k,ntrperiod,nsps,ndiskdat,nb,nbslider,pxdb,s,red,    &
-     ihsym,nzap,slimit,lstrong)
+     f0a,df3,ihsym,nzap,slimit,lstrong)
 
 ! Input:
 !  k         pointer to the most recent new data
@@ -23,11 +23,11 @@ subroutine symspec(k,ntrperiod,nsps,ndiskdat,nb,nbslider,pxdb,s,f0a,df3,    &
   parameter (NFFT1=1024)
   parameter (NFFT2=1024,NFFT2A=NFFT2/8)
   parameter (MAXFFT3=32768)
-  real*4 s(NSMAX),w(NFFT1),w3(MAXFFT3)
+  real*4 s(NSMAX),w3(MAXFFT3)
   real*4 x0(NFFT1),x1(NFFT1)
   real*4 x2(NFFT1+105)
-  real*4 xx(NMAX)
   real*4 ssum(NSMAX)
+  real*4 red(NSMAX)
   complex cx(0:MAXFFT3-1)
   logical*1 lstrong(0:1023)               !Should be (0:512)
   integer*2 id2
@@ -73,7 +73,6 @@ subroutine symspec(k,ntrperiod,nsps,ndiskdat,nb,nbslider,pxdb,s,f0a,df3,    &
   peaklimit=sigmas*max(10.0,rms)
   faclim=3.0
   px=0.
-  df2=12000.0/NFFT2
 
   nwindow=2
 !  nwindow=0                                    !### No windowing ###
@@ -137,20 +136,22 @@ subroutine symspec(k,ntrperiod,nsps,ndiskdat,nb,nbslider,pxdb,s,f0a,df3,    &
 
 999 continue
 
-
   call pctile(s,iz,50,xmed0)
   s(1:iz)=s(1:iz)/xmed0
   call pctile(ssum,iz,50,xmed1)
   savg(1:iz)=ssum(1:iz)/xmed1
 
-!  if(ihsym.eq.160) then
+  call redsync(ss,ntrperiod,ihsym,iz,red)
-!     rewind 71
+
-!     do i=1,iz
+  if(ihsym.eq.160) then
-!        write(71,3003) 1000+i*df3,savg(i)
+     rewind 71
-!3003    format(2f12.3)
+     do i=1,iz
-!     enddo
+        write(71,3003) 1000+i*df3,savg(i),red(i)
-!     flush(71)
+3003    format(3f12.3)
-!  endif
+     enddo
+     flush(71)
+  endif
+
 
   return
 end subroutine symspec

lib/sync9.f90

@@ -4,7 +4,6 @@ subroutine sync9(ss,tstep,f0a,df3,ntol,nfqso,sync,fpk,ccfred)
   real ss(184,NSMAX)
   real ccfred(NSMAX)
 
-  integer ii0(16)
   integer ii(16)                     !Locations of sync half-symbols
   data ii/1,11,21,31,41,51,61,77,89,101,113,125,137,149,161,169/
   integer isync(85)                  !Sync vector for half-symbols

mainwindow.cpp

@@ -97,7 +97,7 @@ MainWindow::MainWindow(QWidget *parent) :
   m_myGrid="FN20qi";
   m_appDir = QApplication::applicationDirPath();
   m_saveDir="/users/joe/wsjtx/install/save";
-  m_txFreq=125;
+  m_txFreq=1500;
   m_setftx=0;
   m_loopall=false;
   m_startAnother=false;
@@ -153,7 +153,7 @@ MainWindow::MainWindow(QWidget *parent) :
   m_monitoring=true;                           // Start with Monitoring ON
   soundInThread.setMonitoring(m_monitoring);
   m_diskData=false;
-  m_tol=500;
+  m_tol=50;
   g_pWideGraph->setTol(m_tol);
 
 // Create "m_worked", a dictionary of all calls in wsjt.log
@@ -301,7 +301,7 @@ void MainWindow::readSettings()
 //-------------------------------------------------------------- dataSink()
 void MainWindow::dataSink(int k)
 {
-  static float s[NSMAX],splot[NSMAX];
+  static float s[NSMAX],red[NSMAX],splot[NSMAX];
   static int n=0;
   static int ihsym=0;
   static int nzap=0;
@@ -328,7 +328,7 @@ void MainWindow::dataSink(int k)
   nb=0;
   if(m_NB) nb=1;
   trmin=m_TRperiod/60;
-  symspec_(&k, &trmin, &m_nsps, &ndiskdat, &nb, &m_NBslider, &px, s,
+  symspec_(&k, &trmin, &m_nsps, &ndiskdat, &nb, &m_NBslider, &px, s, red,
            &f0a, &df3, &ihsym, &nzap, &slimit, lstrong);
   if(ihsym <=0) return;
   QString t;
@@ -337,7 +337,7 @@ void MainWindow::dataSink(int k)
   lab4->setText(t);
   ui->xThermo->setValue((double)px);   //Update the thermometer
   if(m_monitoring || m_diskData) {
-    g_pWideGraph->dataSink2(s,df3,ihsym,m_diskData,lstrong);
+    g_pWideGraph->dataSink2(s,red,df3,ihsym,m_diskData,lstrong);
   }
 
   //Average over specified number of spectra
@@ -594,7 +594,7 @@ void MainWindow::createStatusBar()                           //createStatusBar
 
 void MainWindow::on_tolSpinBox_valueChanged(int i)             //tolSpinBox
 {
-  static int ntol[] = {10,20,50,100,200,500,1000};
+  static int ntol[] = {1,2,5,10,20,50,100,200,500,1000};
   m_tol=ntol[i];
   g_pWideGraph->setTol(m_tol);
   ui->labTol1->setText(QString::number(ntol[i]));
@@ -753,12 +753,6 @@ void MainWindow::on_actionDelete_all_wav_files_in_SaveDir_triggered()
   }
 }
 
-void MainWindow::on_actionFind_Delta_Phi_triggered()              //Find dPhi
-{
-  m_RxLog |= 8;
-  on_DecodeButton_clicked();
-}
-
 void MainWindow::on_actionF4_sets_Tx6_triggered()                //F4 sets Tx6
 {
   m_kb8rq = !m_kb8rq;
@@ -810,7 +804,7 @@ void MainWindow::on_actionAvailable_suffixes_and_add_on_prefixes_triggered()
 
 void MainWindow::on_DecodeButton_clicked()                    //Decode request
 {
-
+  qDebug() << "A" << g_pWideGraph->QSOfreq() << m_tol;
 }
 
 void MainWindow::freezeDecode(int n)                          //freezeDecode()

mainwindow.h

@@ -65,7 +65,6 @@ private slots:
   void on_actionOpen_next_in_directory_triggered();
   void on_actionDecode_remaining_files_in_directory_triggered();
   void on_actionDelete_all_wav_files_in_SaveDir_triggered();
-  void on_actionFind_Delta_Phi_triggered();
   void on_actionF4_sets_Tx6_triggered();
   void on_actionNo_shorthands_if_Tx1_triggered();
   void on_actionNo_Deep_Search_triggered();
@@ -213,7 +212,7 @@ extern void getDev(int* numDevices,char hostAPI_DeviceName[][50],
 extern "C" {
 //----------------------------------------------------- C and Fortran routines
 void symspec_(int* k, int* ntrperiod, int* nsps, int* ndiskdat,
-              int* nb, int* m_NBslider, float* px, float s[],
+              int* nb, int* m_NBslider, float* px, float s[], float red[],
               float* f0a, float* df3, int* nhsym, int* nzap,
                float* slimit, uchar lstrong[]);
 void genjt9_(char* msg, int* minutes, char* msgsent, int itone[],

mainwindow.ui

@@ -35,7 +35,7 @@
    <string notr="true"/>
   </property>
   <widget class="QWidget" name="centralWidget">
-   <widget class="QWidget" name="">
+   <widget class="QWidget" name="layoutWidget">
     <property name="geometry">
      <rect>
       <x>11</x>
@@ -627,7 +627,7 @@ p, li { white-space: pre-wrap; }
               </size>
              </property>
              <property name="text">
-              <string>500</string>
+              <string>50</string>
              </property>
              <property name="alignment">
               <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
@@ -661,7 +661,7 @@ p, li { white-space: pre-wrap; }
               <number>0</number>
              </property>
              <property name="maximum">
-              <number>6</number>
+              <number>9</number>
              </property>
              <property name="value">
               <number>5</number>

plotter.cpp

@@ -27,7 +27,7 @@ CPlotter::CPlotter(QWidget *parent) :                  //CPlotter Constructor
   m_ScalePixmap = QPixmap(0,0);
   m_OverlayPixmap = QPixmap(0,0);
   m_Size = QSize(0,0);
-  m_fQSO = 125;
+  m_fQSO = 1050;
   m_line = 0;
   m_fSample = 12000;
   m_nsps=6912;
@@ -84,9 +84,9 @@ void CPlotter::paintEvent(QPaintEvent *)                    // paintEvent()
   m_paintEventBusy=false;
 }
 
-void CPlotter::draw(float swide[], int i0)             //draw()
+void CPlotter::draw(float swide[], float red[], int i0)             //draw()
 {
-  int j;
+  int j,y2;
   float y;
 
   m_i0=i0;
@@ -103,6 +103,8 @@ void CPlotter::draw(float swide[], int i0)             //draw()
   }
 
   painter2D.setPen(Qt::green);
+  if(m_bJT9Sync) painter2D.setPen(Qt::red);
+
   QPoint LineBuf[MAX_SCREENSIZE];
   j=0;
   bool strong0=false;
@@ -124,8 +126,9 @@ void CPlotter::draw(float swide[], int i0)             //draw()
     m_hist1[y1]++;
     painter1.setPen(m_ColorTbl[y1]);
     painter1.drawPoint(i,0);
-    int y2 = gain*y + 30;
+    if(m_bCurrent) y2 = gain*y + 30;
-    if(!m_bCurrent) y2=gain*10.0*log10(jt9com_.savg[i]);
+    if(m_bCumulative) y2=gain*10.0*log10(jt9com_.savg[i]);
+    if(m_bJT9Sync) y2=3*gain*red[i];
     if(strong != strong0 or i==m_w-1) {
       painter2D.drawPolyline(LineBuf,j);
       j=0;
@@ -297,19 +300,10 @@ void CPlotter::DrawOverlay()                                 //DrawOverlay()
   painter0.setPen(pen0);
   x = m_xClick;
   painter0.drawLine(x,15,x,30);
-  int x0=(16384-m_i0)/m_binsPerPixel;
+  int x1=x - m_tol/df;
-  m_fGreen=(x-x0)*df;
+  int x2=x + m_tol/df;
-  x0 += (x0-x);
+  pen0.setWidth(6);
-  QPen pen3(Qt::red, 3);
+  painter0.drawLine(x1,28,x2,28);
-  painter0.setPen(pen3);
-  if(x0>0 and x0<w) painter0.drawLine(x0,15,x0,30);
-
-  // Now make the lower scale, using m_LowerScalePixmap and painter3
-  QRect rect1;
-//  QPainter painter3(&m_LowerScalePixmap);
-//  painter3.initFrom(this);
-//  painter3.setFont(Font);
-//  painter3.setPen(Qt::black);
 
   df = 12000.0/m_nsps;
   int nlabs=df*w/m_freqPerDiv + 1.0;
@@ -322,16 +316,6 @@ void CPlotter::DrawOverlay()                                 //DrawOverlay()
     if ((i%10) == 0) y=18;
 //    painter3.drawLine(x,y,x,30);
   }
-
-  /*
-  //draw frequency values
-  MakeFrequencyStrs();
-  for( int i=0; i<=nlabs; i++) {
-    x = (int)( (float)i*pixperdiv - pixperdiv/2);
-    rect1.setRect(x,0, (int)pixperdiv, 20);
-//    painter3.drawText(rect1, Qt::AlignHCenter|Qt::AlignVCenter,m_HDivText[i]);
-  }
-  */
 }
 
 void CPlotter::MakeFrequencyStrs()                       //MakeFrequencyStrs

plotter.h

@@ -27,6 +27,8 @@ public:
   QSize sizeHint() const;
   QColor  m_ColorTbl[256];
   bool    m_bCurrent;
+  bool    m_bCumulative;
+  bool    m_bJT9Sync;
   int     m_plotZero;
   int     m_plotGain;
   float   m_fSpan;
@@ -37,7 +39,7 @@ public:
   qint32  m_tol;
   qint32  m_fCal;
 
-  void draw(float sw[], int i0);		//Update the waterfalls
+  void draw(float sw[], float red[], int i0);		//Update the waterfall
   void SetRunningState(bool running);
   void setPlotZero(int plotZero);
   int  getPlotZero();

widegraph.cpp

@@ -41,8 +41,11 @@ WideGraph::WideGraph(QWidget *parent) :
   m_dialFreq=settings.value("DialFreqMHz",473.000).toDouble();
   ui->fDialLineEdit->setText(QString::number(m_dialFreq));
   ui->widePlot->m_bCurrent=settings.value("Current",true).toBool();
+  ui->widePlot->m_bCumulative=settings.value("Cumulative",false).toBool();
+  ui->widePlot->m_bJT9Sync=settings.value("JT9Sync",false).toBool();
   ui->rbCurrent->setChecked(ui->widePlot->m_bCurrent);
-  ui->rbCumulative->setChecked(!ui->widePlot->m_bCurrent);
+  ui->rbCumulative->setChecked(ui->widePlot->m_bCumulative);
+  ui->rbJT9Sync->setChecked(ui->widePlot->m_bJT9Sync);
   int nbpp=settings.value("BinsPerPixel",1).toInt();
   ui->widePlot->setBinsPerPixel(nbpp);
   settings.endGroup();
@@ -70,12 +73,14 @@ void WideGraph::saveSettings()
   settings.setValue("WaterfallAvg",ui->waterfallAvgSpinBox->value());
   settings.setValue("DialFreqMHz",m_dialFreq);
   settings.setValue("Current",ui->widePlot->m_bCurrent);
+  settings.setValue("Cumulative",ui->widePlot->m_bCumulative);
+  settings.setValue("JT9Sync",ui->widePlot->m_bJT9Sync);
   settings.setValue("BinsPerPixel",ui->widePlot->binsPerPixel());
   settings.endGroup();
 }
 
-void WideGraph::dataSink2(float s[], float df3, int ihsym, int ndiskdata,
+void WideGraph::dataSink2(float s[], float red[], float df3, int ihsym,
-                          uchar lstrong[])
+                          int ndiskdata, uchar lstrong[])
 {
   static float splot[NSMAX];
   static float swide[2048];
@@ -139,7 +144,7 @@ void WideGraph::dataSink2(float s[], float df3, int ihsym, int ndiskdata,
       }
     }
     ntr0=ntr;
-    ui->widePlot->draw(swide,i0);
+    ui->widePlot->draw(swide,red,i0);
   }
 }
 
@@ -266,12 +271,23 @@ void WideGraph::setPeriod(int ntrperiod, int nsps)
   ui->widePlot->setNsps(nsps);
 }
 
-void WideGraph::on_rbCurrent_toggled(bool checked)
+void WideGraph::on_rbCurrent_clicked()
 {
-  ui->widePlot->m_bCurrent=checked;
+  ui->widePlot->m_bCurrent=true;
+  ui->widePlot->m_bCumulative=false;
+  ui->widePlot->m_bJT9Sync=false;
 }
 
-void WideGraph::on_rbCumulative_toggled(bool checked)
+void WideGraph::on_rbCumulative_clicked()
 {
-  ui->widePlot->m_bCurrent=!checked;
+  ui->widePlot->m_bCurrent=false;
+  ui->widePlot->m_bCumulative=true;
+  ui->widePlot->m_bJT9Sync=false;
+}
+
+void WideGraph::on_rbJT9Sync_clicked()
+{
+  ui->widePlot->m_bCurrent=false;
+  ui->widePlot->m_bCumulative=false;
+  ui->widePlot->m_bJT9Sync=true;
 }

widegraph.h

@@ -16,8 +16,8 @@ public:
 
   double m_dialFreq;
 
-  void   dataSink2(float s[], float df3, int ihsym, int ndiskdata,
+  void   dataSink2(float s[], float red[], float df3, int ihsym,
-                   uchar lstrong[]);
+                   int ndiskdata, uchar lstrong[]);
   int    QSOfreq();
   int    nSpan();
   int    nStartFreq();
@@ -53,10 +53,9 @@ private slots:
   void on_gainSpinBox_valueChanged(int arg1);
   void on_autoZeroPushButton_clicked();
   void on_fDialLineEdit_editingFinished();
-
+  void on_rbCurrent_clicked();
-  void on_rbCurrent_toggled(bool checked);
+  void on_rbCumulative_clicked();
-
+  void on_rbJT9Sync_clicked();
-  void on_rbCumulative_toggled(bool checked);
 
 private:
   qint32 m_waterfallAvg;

widegraph.ui

@@ -297,6 +297,13 @@
          </property>
         </widget>
        </item>
+       <item>
+        <widget class="QRadioButton" name="rbJT9Sync">
+         <property name="text">
+          <string>JT9 Sync</string>
+         </property>
+        </widget>
+       </item>
        <item>
         <spacer name="horizontalSpacer_5">
          <property name="orientation">