From 756cf180fe166d943188dcc203a3ac31047e4c4c Mon Sep 17 00:00:00 2001 From: Bill Somerville Date: Mon, 20 Oct 2014 00:14:06 +0000 Subject: [PATCH] Issue log update git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx-1.4@4543 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 --- issue-log.txt | 132 ++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 117 insertions(+), 15 deletions(-) diff --git a/issue-log.txt b/issue-log.txt index 028a8b68f..297277ca8 100644 --- a/issue-log.txt +++ b/issue-log.txt @@ -77,8 +77,10 @@ Commander TS-2000 - David wd4kpd - possibly the same issue the Icom IC-756 and after to satisfy rigs like the Kenwood TS-2000. - g4wjs: Sent out a test version to wb6dkh, wd4kpd and aa6yq - - awaiting feedback. + g4wjs: Sent out a test version to wb6dkh, wd4kpd and aa6yq. + + g4wjs: Testing reports are positive. Will release changes when the + required Commander v11.0.0 is publicly released. Commander TS-2000 - Jim wb6dkh - Fake split Hamlib IC-735 - Dieter dk6ov - Fake split not returning to correct QRG @@ -112,6 +114,8 @@ Flex 6700 - Ed k0kc - No CAT no PTT g4wjs: Reported as working as expected by kf2t. + g4wjs: Fixed r4434 - Closed. + Hamlib FlexRadio (DTTSP UDP & IPC interfaces) - - Need to diagnose and check if these work g4wjs: Hamlib has a FlexRadio back end that talks UDP on 19001 or @@ -145,6 +149,9 @@ Hamlib FT-450 - Rudy ve3bdr - Protocol error while getting mode of split VFO patched version and sent tracing variant to ve3bdr for testing. + g4wjs: Sent upstream patch to hamlib team for turning off AI mode + and retry mechanism for rig busy responses. + g4wjs: Hamlib backend for this rig (shared by FT-9000, FT-950, FT-5000 and, FT-2000) needs enhancement, it is missing proper split mode, frequency and, enable @@ -170,6 +177,17 @@ Hamlib IC-7100 - Erik on4pb - CAT PTT method not available on IC-7100 being RIG_PTT_SERIAL_CAT instead of RIG_PTT_RIG. Asked for clarification on hamlib-devel ML. + g4wjs: Sent upstream patch to hamlib team to resolve issues with + PTT type registration. Patch accepted and applied. + + g4wjs: Sent version built with revised hamlib for testing. + + g4wjs: on4pb reports this version works correctly with + hamlib/ic-7100, HRDv5/IC-7100, OmniRig/IC-7100, + hamlib/TX-850S and, hamlib/HPSDR(TS-2000). + + g4wjs: Fixed in hamlib - Closed. + Hamlib IC-746 - Doc kb3mow - Wrong Tx QRG used after dbl-click on decode g4wjs: Asked for more details of exact Rx/Tx dial QRGs. @@ -203,6 +221,18 @@ OmniRig Omni VII - Bert w0rsb - OmniRig server going offline error g4wjs: Sent a tracing version of RC2 - awaiting log. +OmniRig TS-2000 - Yanis sv2bbo - Initialization timeout + + g4wjs: Is using VPSE as serial splitter to cooperate with Kenwood + ARCP rig control program, have explained this is a invalid + configuration and will not be supported. + + g4wjs: Also using OmniRig as that is used with UR5EQF_Log 3 for + rig interface. Have explained that there is a known defect + that causes "Test CAT" to fail. Suggested he just click + "OK" to exit Settings. Also sent trace version - awaiting + log. + Hamlib R8500 - Chris (UK SWL) airguzzler@btinternet.com - Hamlib IO error g4wjs: Probably port mis-configuration. Awaiting update. @@ -283,7 +313,7 @@ Decoded text - Albert kc8kjf - Report or grid last character truncated selected "Show DXCC entity and worked before status" when the main window was not (then) large enough? -HRD FTDX3000 - Jean-Michel f6eao/p - Not working +HRD FTdx3000 - Jean-Michel f6eao/p - Not working g4wjs: This as yet untested rig with WSJT-X + HRD clearly needs some adjustment to the initialization in the HRDTransceiver @@ -292,6 +322,15 @@ HRD FTDX3000 - Jean-Michel f6eao/p - Not working g4wjs: Requested the "HRD Interface Information.txt" file for analysis. + g4wjs: Added required regular expressions for the FTdx3000 and + reworked HRD interface to make more reliable and robust. + + g4wjs: One outstanding issue, the mode of the "other" VFO cannot + be reliably set via HRD so FTdx3000 users must set "Mode" + to "None" in WSJT-X. + + g4wjs: Fixed r4523 - Closed. + Multi-instance support - Bill g4wjs - Lock mechanism needed to avoid duplicates g4wjs: There is no check that multiple instances are being run @@ -506,18 +545,6 @@ Hamlib FTdx3000 - - No direct support g4wjs: Needs new hamlib backend. -OmniRig TS-2000 - Yanis sv2bbo - Initialization timeout - - g4wjs: Is using VPSE as serial splitter to cooperate with Kenwood - ARCP rig control program, have explained this is a invalid - configuration and will not be supported. - - g4wjs: Also using OmniRig as that is used with UR5EQF_Log 3 for - rig interface. Have explained that there is a known defect - that causes "Test CAT" to fail. Suggested he just click - "OK" to exit Settings. Also sent trace version - awaiting - log. - Hamlib IC-817 - David wa1oui - Occasional hamlib errors g4wjs: Using OX X 10.9 with Timewave Navigator. Getting @@ -561,7 +588,82 @@ Halib TT Orion - Peter oz1pif - Split mismatch error g4wjs: Issue is hamlib defect not detecting split correctly nor setting split correctly either. Submitted patch to hamlib. + g4wjs: Fixed, hamlib patch accepted and applied - Closed. + Hamlib IC-7410 - Mike k6msm - "Hamlib error: Command rejected by the rig while setting current VFO" g4wjs: Sent tracing version - awaiting log. + g4wjs: Hamlib back end for IC-7410 is broken. Fixed first detected + defect and sent new version of WSJT-X along with test plan. + + g4wjs: Finalized hamlib changes and submitted patch upstream to + hamlib team. Sent patched version to k6msm for testing. + + g4wjs: Fixed, patch to hamlib accepted and applied - Closed. + +Commander - Phil f4bkt - Invalid frequencies above VLF in French locale + + g4wjs: Commander is reporting frequencies via TCP/IP with invalid + UTF-8 characters when the character should be + multi-byte. E.g. the non-break space U+00A0 that is used as + a number group separator in the French locale. + + g4wjs: Reported issue to Dave AA6YQ but he has been unable to + persuade Commander to send valid UTF-8 strings. Reverted to + using the undocumented Commander server + commands"CmdGetFreq" and "CmdGetTxFreq" which always return + numbers with '.' as a DP and ',' as a group separator. + + g4wjs: Dave AA6YQ will continue to look for a proper solution so + this fix should be temporary. + + g4wjs: Hotfix r4518 built and sent to f4bkt and Phil kb9ro who + reported similar issues. + +HRD TT Omni VII - Mike w9mdb - Mode setting not working + + g4wjs: Trace shows HRD buttons for mode not recognized + + g4wjs: Fixed r4526 - Closed. + +HRD FT-450D - Bill nzzal - Invalid mode error + + g4wjs: Requested "HRD Interface Information.txt". + + g4wjs: Added support for FT-450(D) modes via HRD. Sent test + version to n7zal. Confirmed as working by n7zal. + + g4wjs: Fixed r4529 - Closed. + +Hamlib IC-7410 - Mike m6msm - Changing filter on rig causes error + + g4wjs: This is due to "CI-V Transceive" mode being on on the rig. + Hamlib cannot cope with unsolicited CI-V bus status + reports. Suggested m6msm turns off "CI-V Transceive" mode + in the rig menu. + +HRD FTdx3000 - Jean-Michel f6eao/p - Band change sets wrong aerial and power + + g4wjs: This may be a generic Yaesu issue. Yaesu radios recall the + last selected aerial (and power setting on some rigs) when + switching bands with the band buttons or band up/down + selector. Just sending a QSY frequency via a CAT command + does not do the same thing, it just changes the dial + frequency. We may have to use any available band selector + CAT command before setting frequency to get preferred + behaviour on these type of radios. This would require + hamlib changes as well. + +DDUtil Flex Radio 5000A - Chris n1cl - Unrcognized command error + + g4wjs: Apparently this setup is some sort on HRD emulation. Asked + for "HRD Interface Information.txt". + + g4wjs: Added modes to interpreter for this emulator. Sent test + version to n1cl. + + g4wjs: n1cl reports all working correctly. No split mode available + on the HRD emulator. + + g4wjs: Fixed r4541 - Closed.