Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0

doc/common/license.adoc

@@ -29,7 +29,7 @@ the following copyright notice prominently:
 *The algorithms, source code, look-and-feel of _{prog}_ and related
 programs, and protocol specifications for the modes FSK441, FT4, FT8,
 JT4, JT6M, JT9, JT65, JTMS, QRA64, ISCAT, and MSK144 are Copyright (C)
-2001-2019 by one or more of the following authors: Joseph Taylor,
+2001-2020 by one or more of the following authors: Joseph Taylor,
 K1JT; Bill Somerville, G4WJS; Steven Franke, K9AN; Nico Palermo,
 IV3NWV; Greg Beam, KI7MT; Michael Black, W9MDB; Edson Pereira, PY2SDR;
 Philip Karn, KA9Q; and other members of the WSJT Development Group.*

doc/common/links.adoc

@@ -68,6 +68,7 @@ d). Edit lines as needed. Keeping them in alphabetic order help see dupes.
 :fmt_k5cm: http://www.k5cm.com/[FMT Event Info]
 :fmt_wspr: http://www.physics.princeton.edu/pulsar/K1JT/FMT_User.pdf[Accurate Frequency Measurements with your WSPR Setup]
 :ft4_protocol: http://physics.princeton.edu/pulsar/k1jt/FT4_Protocol.pdf[The FT4 Protocol for Digital Contesting]
+:ft4_ft8_protocols: http://physics.princeton.edu/pulsar/k1jt/FT4_FT8_with_figs.pdf[The FT4 and FT8 Communication Protocols]
 :ft8_tips: http://www.g4ifb.com/FT8_Hinson_tips_for_HF_DXers.pdf[FT8 Operating Guide]
 :ft8_DXped: http://physics.princeton.edu/pulsar/k1jt/FT8_DXpedition_Mode.pdf[FT8 DXpedition Mode]
 :gnu_gpl: http://www.gnu.org/licenses/gpl-3.0.txt[GNU General Public License]

doc/user_guide/en/acknowledgements.adoc

@@ -1,19 +1,21 @@
 // Status=review
 
-The _WSJT_ project was started in 2001.  Since 2005 it has been an
+The _WSJT_ project was started by *K1JT* in 2001.  Since 2005 it has
-Open Source project, and it now includes programs _WSJT_, _MAP65_,
+been an Open Source project, which now includes the programs _WSJT_,
-_WSPR_, _WSJT-X_, and _WSPR-X_.  All code is licensed under the
+_MAP65_, _WSPR_, _WSJT-X_, and _WSPR-X_.  *G4WJS* (since 2013) and
-GNU Public License (GPL).  Many users of these programs, too numerous
+*K9AN* (since 2015) have made major contributions to _WSJT-X_.
-to mention here individually, have contributed suggestions and advice
+Together with K1JT they now form the core development team.
-that have greatly aided the development of _WSJT_ and its sister
-programs.
 
-For _WSJT-X_ in particular, we acknowledge contributions from *AC6SL,
+All code in the _WSJT_ project is licensed under the GNU Public
-AE4JY, DJ0OT, G3WDG, G4KLA, G4WJS, IV3NWV, IW3RAB, K3WYC, K9AN,
+License (GPL).  Many users of these programs, too numerous to mention
-KA6MAL, KA9Q, KB1ZMX, KD6EKQ, KI7MT, KK1D, ND0B, PY2SDR, VE1SKY, VK3ACF,
+here individually, have contributed suggestions and advice that have
-VK4BDJ, VK7MO, W4TI, W4TV, and W9MDB*.  Each of these amateurs has helped to
+greatly aided the development of _WSJT_ and its sister programs.  For
-bring the program’s design, code, testing, and/or documentation to
+_WSJT-X_ in particular, we acknowledge contributions from *AC6SL,
-its present state.
+AE4JY, DJ0OT, G3WDG, G4KLA, IV3NWV, IW3RAB, K3WYC, KA6MAL, KA9Q,
+KB1ZMX, KD6EKQ, KI7MT, KK1D, ND0B, PY2SDR, VE1SKY, VK3ACF, VK4BDJ,
+VK7MO, W4TI, W4TV, and W9MDB*.  Each of these amateurs has helped to
+bring the program’s design, code, testing, and/or documentation to its
+present state.
 
 Most of the color palettes for the _WSJT-X_ waterfall were copied from
 the excellent, well documented, open-source program _fldigi_, by *W1HKJ*

doc/user_guide/en/decoder_notes.adoc

@@ -26,7 +26,7 @@ hypothetically known information.
 
 [[FT8_AP_INFO_TABLE]]
 .FT4 and FT8 AP information types
-[width="35%",cols="h10,<m20",frame=topbot,options="header"]
+[width="50%",cols="h10,<m20",frame=topbot,options="header"]
 |===============================================
 |aP | Message components
 |a1 | CQ   &#160; &#160;   ?   &#160; &#160;   ? 
@@ -49,7 +49,7 @@ be attempted in each state.
 
 [[FT8_AP_DECODING_TYPES_TABLE]]
 .FT4 and FT8 AP decoding types for each QSO state
-[width="35%",cols="h10,<m20",frame=topbot,options="header"]
+[width="50%",cols="h10,<m20",frame=topbot,options="header"]
 |===========================================
 |State        |AP type
 |CALLING STN  |   2, 3
@@ -67,7 +67,7 @@ averaged to obtain the decode.
 
 [[JT65_AP_INFO_TABLE]]
 .JT65 AP information types
-[width="35%",cols="h10,<m20",frame=topbot,options="header"]
+[width="50%",cols="h10,<m20",frame=topbot,options="header"]
 |===============================================
 |aP | Message components
 |a1 | CQ   &#160; &#160;   ?   &#160; &#160;   ? 
@@ -81,7 +81,7 @@ averaged to obtain the decode.
 
 [[JT65_AP_DECODING_TYPES_TABLE]]
 .JT65 AP decoding types for each QSO state
-[width="35%",cols="h10,<m20",frame=topbot,options="header"]
+[width="50%",cols="h10,<m20",frame=topbot,options="header"]
 |===========================================
 |State        |AP type
 |CALLING STN  |   2, 3, 6, 7
@@ -140,7 +140,7 @@ Table 6 below shows the meaning of the return codes R in QRA64 mode.
 
 [[QRA64_AP_INFO_TABLE]]
 .QRA64 AP return codes
-[width="35%",cols="h10,<m20",frame=topbot,options="header"]
+[width="50%",cols="h10,<m20",frame=topbot,options="header"]
 |===============================================
 |rc | Message components
 |0  | ?    &#160; &#160;   ?   &#160; &#160;   ?

doc/user_guide/en/install-linux.adoc

@@ -3,7 +3,7 @@
 Debian, Ubuntu, and other Debian-based systems including Raspbian:
 
 NOTE: The project team release binary installer packages for Linux
-when a new _WSJT-X_ release is announced, note that these are built to
+when a new _WSJT-X_ release is announced.  These are built to
 target one contemporary version of a Linux distribution. Although
 these may work on newer Linux versions or even different
 distributions, it is unlikely that they will work on older

doc/user_guide/en/install-windows.adoc

@@ -32,18 +32,18 @@ TIP: Your computer may be configured so that this directory is
 
 * image:LoTW_TLS_error.png[_WSJT-X_ LoTW download TLS error,
   role="right"] _WSJT-X_ requires the _OpenSSL_ libraries to be
-  installed. Suitable libraries may already be installed on your
+  installed, and suitable libraries may already be installed on your
-  system, if they are not you will see this error shortly after
+  system.  If they are not you will see this error shortly after
   requesting a fetch of the latest LoTW users database. To fix this
   you need to install the _OpenSSL_ libraries.
 
-** You can download a suitable _OpenSSL_ package for from
+** You can download a suitable _OpenSSL_ package from
-   {win_openssl_packages}, you need the latest *Windows Light*
+   {win_openssl_packages}.  You need the latest *Windows Light*
    version. For the 32-bit _WSJT-X_ build use the latest Win32 v1.1.x
    version of the _OpenSSL_ libraries, for the 64-bit _WSJT-X_ use the
-   latest Win64 v1.1.x version of the _OpenSSL_ libraries (Note it is
+   latest Win64 v1.1.x version of the _OpenSSL_ libraries which at the
-   OK to install both versions on a 64-bit system) which at the time
+   time of writing were {win32_openssl} and {win64_openssl}. It is OK
-   of writing were {win32_openssl} and {win64_openssl} respectively.
+   to install both versions on a 64-bit system.
 
 ** Install the package and accept the default options, including the
    option to copy the _OpenSSL_ DLLs to the Windows system

doc/user_guide/en/introduction.adoc

@@ -16,15 +16,14 @@ making reliable QSOs under weak-signal conditions. They use nearly
 identical message structure and source encoding.  JT65 and QRA64 were
 designed for EME ("`moonbounce`") on the VHF/UHF bands and have also
 proven very effective for worldwide QRP communication on the HF bands.
-QRA64 has a number of advantages over JT65, including better
+QRA64 has a some advantages over JT65, including better performance
-performance on the very weakest signals.  We imagine that over time it
+for EME on the higher microwave bands.  JT9 was originally designed
-may replace JT65 for EME use.  JT9 was originally designed for the LF,
+for the LF, MF, and lower HF bands.  Its submode JT9A is 2 dB more
-MF, and lower HF bands.  Its submode JT9A is 2 dB more sensitive than
+sensitive than JT65 while using less than 10% of the bandwidth.  JT4
-JT65 while using less than 10% of the bandwidth.  JT4 offers a wide
+offers a wide variety of tone spacings and has proven highly effective
-variety of tone spacings and has proven highly effective for EME on
+for EME on microwave bands up to 24 GHz.  These four "`slow`" modes
-microwave bands up to 24 GHz.  These four "`slow`" modes use
+use one-minute timed sequences of alternating transmission and
-one-minute timed sequences of alternating transmission and reception,
+reception, so a minimal QSO takes four to six minutes — two or three
-so a minimal QSO takes four to six minutes — two or three
 transmissions by each station, one sending in odd UTC minutes and the
 other even.  FT8 is operationally similar but four times faster
 (15-second T/R sequences) and less sensitive by a few dB.  FT4 is

doc/user_guide/en/make-qso.adoc

@@ -93,7 +93,7 @@ tab.  Model QSOs then proceed as follows, for each event type:
 
 *NA VHF Contest*
 
- CQ K1ABC FN42
+ CQ TEST K1ABC FN42
                        K1ABC W9XYZ EN37
  W9XYZ K1ABC R FN42
                        K1ABC W9XYZ RRR
@@ -134,7 +134,7 @@ to upgrade _WSJT-X_ if you will use *EU VHF Contest* messages.
 
 *WW Digi Contest*
 
- CQ K1ABC FN42
+ CQ WW K1ABC FN42
                        K1ABC S52XYZ JN76
  S52XYZ K1ABC R FN42
                        K1ABC S52XYZ RR73

doc/user_guide/en/protocols.adoc

@@ -52,10 +52,10 @@ were the callsigns `E9AA` through `E9ZZ`.  Upon reception they are
 converted back to the form `CQ AA` through `CQ ZZ`, for display to the
 user.
 
-The new FT4, FT8, and MSK144 protocols use a different lossless
+The FT4, FT8, and MSK144 protocols use different lossless compression
-compression algorithm with features to generate and recognize the
+algorithms with features that generate and recognize special messages
-special messages used for contesting and the like.  (More to come,
+used for contesting and other special purposes.  Full details have
-here ...)
+been published in QEX, see {ft4_ft8_protocols}.
 
 To be useful on channels with low signal-to-noise ratio, this kind of
 lossless message compression requires use of a strong forward error

doc/user_guide/en/settings-advanced.adoc

@@ -1,6 +1,6 @@
 image::settings-advanced.png[align="center",alt="Settings Advanced"]
 
-_JT65 decoding parameters_ 
+_JT65 VHF/UHF/Microwave decoding parameters_ 
 
 - *Random erasure patterns* logarithmically scales the number of
 pseudo-random trials used by the Franke-Taylor JT65 decoder.  Larger

doc/user_guide/en/settings-audio.adoc

@@ -1,9 +1,9 @@
 // Status=review
 
-image::settings-audio.png[align="center",alt="_WSJT-X_ Audio Configuration Screen"]
-
 Select the *Audio* tab to configure your sound system.
 
+image::settings-audio.png[align="center",alt="_WSJT-X_ Audio Configuration Screen"]
+
 * _Soundcard_: Select the audio devices to be used for *Input* and
 *Output*.  Usually the *Mono* settings will suffice, but in special
 cases you can choose *Left*, *Right*, or *Both* stereo channels.
@@ -19,7 +19,7 @@ to prevent inadvertently transmitting them over the air.
 
 +
 
-NOTE: Windows Vista and later may configure audio devices using
+NOTE: Windows 7 and later may configure audio devices using
 the Texas Instruments PCM2900 series CODEC for microphone input rather
 line input.  (This chip is used in many radios with built-in USB
 CODECs, as well as various other audio interfaces.)  If you are using

doc/user_guide/en/settings-frequencies.adoc

@@ -1,12 +1,13 @@
 // Status=review
 
 [[FIG_BAND_SETTINGS]]
-image::settings-frequencies.png[align="center",alt="Frequency Screen"]
 
-_Working Frequencies_: By default, the *Working Frequencies* table
+_By default, the *Working Frequencies* table contains a list of
-contains a list of frequencies conventionally used for modes FT8, JT4,
+frequencies conventionally used for modes FT8, JT4, JT9, JT65, MSK144,
-JT9, JT65, MSK144, WSPR, and Echo.  Conventions may change with time
+WSPR, and Echo.  Conventions may change with time or by user
-or by user preference; you can modify the frequency table as desired.
+preference; you can modify the frequency table as desired.
+
+image::settings-frequencies.png[align="center",alt="Frequency Screen"]
 
 - To change an existing entry, double-click to edit it, type a desired
 frequency in MHz or select from the drop down list of options, then

doc/user_guide/en/settings-general.adoc

@@ -1,6 +1,5 @@
 // Status=review
 [[FIG_CONFIG_STATION]]
-image::settings-general.png[align="center",alt="Settings Window"]
 
 Select the *General* tab on the *Settings* window.  Under _Station
 Details_ enter your callsign, grid locator (preferably the 6-character
@@ -9,6 +8,8 @@ Middle East, and Northern Asia; Region 2 the Americas; and Region 3
 Southern Asia and the Pacific.  This information will be sufficient
 for initial tests.
 
+image::settings-general.png[align="center",alt="Settings Window"]
+
 Meanings of remaining options on the *General* tab should be
 self-explanatory after you have made some QSOs using _WSJT-X_.  You
 may return to set these options to your preferences later.  

doc/user_guide/en/settings-radio.adoc

@@ -1,11 +1,11 @@
 // Status=review
 
-image::RadioTab.png[align="center",alt="Radio Tab"]
-
 _WSJT-X_ offers CAT (Computer Aided Transceiver) control of relevant
 features of most modern transceivers.  To configure the program for
 your radio, select the *Radio* tab.
 
+image::RadioTab.png[align="center",alt="Radio Tab"]
+
 * Select your radio type from the drop-down list labeled *Rig*, or
   *None* if you do not wish to use CAT control.
 
@@ -26,8 +26,6 @@ your radio, select the *Radio* tab.
 
 +
 
-NOTE: _Omni-Rig_ is available only under Windows.
-
 * Set *Poll Interval* to the desired interval for _WSJT-X_ to query
   your radio.  For most radios a small number (say, 1 – 3 s) is
   suitable.

doc/user_guide/en/settings-txmacros.adoc

@@ -1,11 +1,12 @@
 // Status=review
 
 [[FigTxMacros]]
-image::tx-macros.png[align="center",alt="Tx Macros Screen"]
 
 *Tx Macros* are an aid for sending brief, frequently used free-text
 messages such as the examples shown above.
 
+image::tx-macros.png[align="center",alt="Tx Macros Screen"]
+
 - To add a new message to the list, enter the desired text (up to 13
 characters) in the entry field at top, then click *Add*.
 

doc/user_guide/en/transceiver-setup.adoc

@@ -39,12 +39,6 @@ TIP: The PC audio mixer normally has two sliders, one for each
   frequency setting, on HF bands you can display the full sub-band
   generally used for one mode.
 
-- Of course, you might prefer to concentrate on one mode at a time,
-  setting your dial frequency to (say) 14.074 for FT8, 14.076 for
-  JT65, or 14.078 for JT9.  Present conventions have the nominal JT9
-  dial frequency 2 kHz higher than the JT65 dial frequency on most
-  bands, and the FT8 frequency 2 kHz lower.
-
 .Transmitter Audio Level
 
 * Click the *Tune* button on the main screen to switch the radio into

doc/user_guide/en/tutorial-example3.adoc

@@ -1,14 +1,13 @@
 // Status=review
 .Main Window:
 - Select *FT8* on the *Mode* menu.
-- Set Tx frequency to 1600 Hz, Rx to 1442 Hz.
 - Double-click on *Erase* to clear both text windows.
 
 .Wide Graph Settings:
 
-- *Bins/Pixel* = 4, *Start* = 200 Hz, *N Avg* = 2
+- *Bins/Pixel* = 5, *Start* = 100 Hz, *N Avg* = 2
 - Adjust the width of the Wide Graph window so that the upper
-frequency limit is approximately 2600 Hz.
+frequency limit is approximately 3300 Hz.
 
 .Open a Wave File:
 
@@ -45,7 +44,7 @@ Rx frequency to that of the selected message and leaving Tx frequency
 unchanged.  To change both Rx and Tx frequencies, hold *Ctrl* down
 when double-clicking.
 
-TIP: To avoid QRM from competing callers, it is frequently desirable
+TIP: To avoid QRM from competing callers, it is usually best 
 to answer a CQ on a different frequency from that of the CQing
 station.  The same is true when you tail-end another QSO.  Choose a Tx
 frequency that appears to be not in use.  You might want to check the
@@ -54,7 +53,7 @@ box *Hold Tx Freq*.
 TIP: Keyboard shortcuts *Shift+F11* and *Shift+F12* provide an easy
 way to move your Tx frequency down or up in 60 Hz steps.
 
-TIP: An online {ft8_tips} by ZL2IFB offers many helpful tips on
+TIP: An online {ft8_tips} by ZL2IFB offers many additional tips on
 operating procedures.
 
 .FT8 DXpedition Mode:

doc/user_guide/en/tutorial-example4.adoc

@@ -1,6 +1,7 @@
-FT4 is designed for contesting, particularly on the HF bands.
+FT4 is designed for contesting, particularly on the HF bands and 6
-Compared with FT8 it is 3.5 dB less sensitive and requires 1.6 times
+meters.  Compared with FT8 it is 3.5 dB less sensitive and requires
-the bandwidth, but it offers the potential for twice the QSO rate.
+1.6 times the bandwidth, but it offers the potential for twice the QSO
+rate.
 
 .Main Window:
 - Select *FT4* on the *Mode* menu.
@@ -8,14 +9,14 @@ the bandwidth, but it offers the potential for twice the QSO rate.
 
 .Wide Graph Settings:
 
-- *Bins/Pixel* = 7, *Start* = 100 Hz, *N Avg* = 1
+- *Bins/Pixel* = 5, *Start* = 100 Hz, *N Avg* = 1
 - Adjust the width of the Wide Graph window so that the upper
-frequency limit is approximately 4000 Hz.
+frequency limit is approximately 3300 Hz.
 
 .Open a Wave File:
 
 - Select *File | Open* and navigate to
-+...\save\samples\FT4\000000_000002.wav+.  The waterfall and Band
++...\save\samples\FT4\200514_182053.wav+.  The waterfall and Band
 Activity window should look something like the following screen shots.
 This sample file was recorded during a practice contest test session, so
 most of the decoded messages use the *RTTY Roundup* message formats.

doc/user_guide/en/vhf-features.adoc

@@ -436,4 +436,6 @@ Decoding>>), and is based on the average of 2 transmissions.
 
 You might wish to experiment with other combinations of entries for
 *My Call*, *DX Call*, and *DX Grid*, and with toggling the various
-options of the *Decode* menu on and off.
+options of the *Decode* menu on and off.  For best sensitivity, most
+users will want to use *Deep* decoding with  *Enable averaging*, 
+*Enable deep search*, and *Enable AP* all turned on.

doc/user_guide/en/wsjtx-main.adoc

@@ -68,8 +68,7 @@ include::install-from-source.adoc[]
 Select *Settings* from the *File* menu or by typing *F2*.  (On
 Macintosh select *Preferences* from the _WSJT-X_ menu, or use the
 keyboard shortcut *Cmd+,*).  The following sections describe setup
-options available on each of eight tabs selectable near the top of the
+options available on eight tabs selectable near the top of the window.
-window.
 
 [[GENERAL]]
 === General

lib/77bit/packjt77.f90

@@ -534,6 +534,7 @@ subroutine unpack77(c77,nrx,msg,unpk77_success)
      read(c77,1060) n12,n22,ir,irpt,iserial,igrid6
 1060 format(b12,b22,b1,b3,b11,b25)
      call hash12(n12,call_1)
+     if(n12.eq.hashmy12) call_1='<'//trim(mycall13)//'>'
      call hash22(n22,call_2)
      nrs=52+irpt
      write(cexch,1022) nrs,iserial

shortcuts.txt

@@ -37,8 +37,9 @@
   <tr><td><b>Ctrl+O   </b></td><td>Open a .wav file</td></tr>
   <tr><td><b>Alt+O    </b></td><td>Change operator</td></tr>
   <tr><td><b>Alt+Q    </b></td><td>Log QSO</td></tr>
-  <tr><td><b>Ctrl+R   </b></td><td>Set Tx4 message to RRR</td></tr>
+  <tr><td><b>Ctrl+R   </b></td><td>Set Tx4 message to RRR (not in FT4)</td></tr>
   <tr><td><b>Alt+R    </b></td><td>Set Tx4 message to RR73</td></tr>
   <tr><td><b>Alt+S    </b></td><td>Stop monitoring</td></tr>
-  <tr><td><b>Alt+T    </b></td><td>Tune</td></tr>
+  <tr><td><b>Alt+T    </b></td><td>Toggle Tune status</td></tr>
+  <tr><td><b>Alt+Z    </b></td><td>Clear hung decoder status</td></tr>
 </table>

widgets/mainwindow.cpp

@@ -5134,7 +5134,7 @@ void MainWindow::genStdMsgs(QString rpt, bool unconditional)
       }
       if(SpecOp::EU_VHF==m_config.special_op_id()) {
         QString a;
-        t="<" + t0.split(" ").at(0) + "> <" + t0.split(" ").at(1) + "> ";
+        t="<" + t0s.split(" ").at(0) + "> <" + t0s.split(" ").at(1) + "> ";
         a = a.asprintf("%4.4d ",ui->sbSerialNumber->value());
         sent=rs + a + m_config.my_grid();
       }

widgets/plotter.cpp

@@ -488,6 +488,9 @@ void CPlotter::DrawOverlay()                   //DrawOverlay()
     painter0.drawLine(x1,24,x1,30);
   }
 
+  int yh=5;
+  int yTxTop=12;
+  int yRxBottom=yTxTop + 2*yh + 4;
   if(m_mode=="JT9" or m_mode=="JT65" or m_mode=="JT9+JT65"
      or m_mode=="QRA64" or m_mode=="FT8" or m_mode=="FT4") {
 
@@ -513,12 +516,14 @@ void CPlotter::DrawOverlay()                   //DrawOverlay()
       painter0.drawLine(x6,24,x6,30);
 
     } else {
+      // Draw the green "goal post"
       painter0.setPen(penGreen);
       x1=XfromFreq(m_rxFreq);
       x2=XfromFreq(m_rxFreq+bw);
-      painter0.drawLine(x1,24,x1,30);
+      painter0.drawLine(x1,yRxBottom-yh,x1,yRxBottom);
-      painter0.drawLine(x1,28,x2,28);
+      painter0.drawLine(x1,yRxBottom,x2,yRxBottom);
-      painter0.drawLine(x2,24,x2,30);
+      painter0.drawLine(x2,yRxBottom-yh,x2,yRxBottom);
+
     }
   }
 
@@ -538,9 +543,10 @@ void CPlotter::DrawOverlay()                   //DrawOverlay()
       x1=XfromFreq(m_txFreq-0.5*bw);
       x2=XfromFreq(m_txFreq+0.5*bw);
     }
-    painter0.drawLine(x1,17,x1,21);
+    // Draw the red "goal post"
-    painter0.drawLine(x1,17,x2,17);
+    painter0.drawLine(x1,yTxTop,x1,yTxTop+yh);
-    painter0.drawLine(x2,17,x2,21);
+    painter0.drawLine(x1,yTxTop,x2,yTxTop);
+    painter0.drawLine(x2,yTxTop,x2,yTxTop+yh);
   }
 
   if(m_mode=="JT9+JT65") {

widgets/widgets.pri

@@ -9,8 +9,8 @@ SOURCES += \
   widgets/colorhighlighting.cpp widgets/ExportCabrillo.cpp \
   widgets/AbstractLogWindow.cpp \
   widgets/FrequencyLineEdit.cpp widgets/FrequencyDeltaLineEdit.cpp \
-  widgets/FoxLogWindow.cpp widgets/CabrilloLogWindow.cpp
+  widgets/FoxLogWindow.cpp widgets/CabrilloLogWindow.cpp \
-
+  widgets/HelpTextWindow.cpp
 HEADERS  += \
   widgets/mainwindow.h widgets/plotter.h \
   widgets/about.h widgets/widegraph.h  \
@@ -21,7 +21,7 @@ HEADERS  += \
   widgets/fastplot.h widgets/MessageBox.hpp widgets/colorhighlighting.h \
   widgets/ExportCabrillo.h widgets/AbstractLogWindow.hpp \
   widgets/FoxLogWindow.hpp widgets/CabrilloLogWindow.hpp \
-  widgets/DateTimeEdit.hpp
+  widgets/DateTimeEdit.hpp widgets/HelpTextWindow.hpp
 
 FORMS    += \
   widgets/mainwindow.ui widgets/about.ui \