w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-21 19:55:20 -05:00
Code Issues Packages Projects Releases Wiki Activity

Additional information on FT8 DXpedition Mode for the WSJT-X User Guide.

Browse Source 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8662 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This commit is contained in:
Joe Taylor 2018-05-15 19:32:40 +00:00
parent a27498e45d
commit 800da16135
1 changed files with 10 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
doc/user_guide/en/tutorial-example3.adoc
View File

@ -56,17 +56,21 @@ NOTE: Further helpful tips on FT8 operating procedures are available
.FT8 DXpedition Mode:
- This special operating mode enables DXpeditions to make FT8 QSOs at
This special operating mode enables DXpeditions to make FT8 QSOs at
very high rates. Both stations must use _WSJT-X_ Version 1.9 or
later. Detailed operating instructions for {ft8_DXped} are available
online. Do not try to use DXpedition mode without reading these
instructions carefully!
IMPORTANT: FT8 DXpedition mode is suitable for use only by legitimate
DXpeditions and those attempting to work them. Do not try to use
DXpedition mode for normal FT8 operation. Do not use it in the
conventional FT8 subbands. And especially, do not use the
multi-signal capability unless you are a DXpedition.
IMPORTANT: FT8 DXpedition mode is intended for use by rare-entity
DXpeditions and other unusual circumstances in which sustained QSO
rates well above 100/hour are expected. Do not use the multi-signal
capability unless you satisfy this requirement, and do not use
DXpedition Mode in the conventional FT8 sub-bands. If you are
contemplating operation as Fox using DXpedition Mode, find a suitable
dial frequency consistent with regional band plans and publicize it
for the operators you hope to work. Remember that on-the-air signal
frequencies will be higher than the dial frequency by up to 4 kHz.
IMPORTANT: When finished with this Tutorial, don't forget to re-enter
your own callsign as *My Call* on the *Settings | General* tab.