diff --git a/libm65/Makefile.MinGW b/libm65/Makefile.MinGW
index 0358891ca..9a1c2f2e4 100644
--- a/libm65/Makefile.MinGW
+++ b/libm65/Makefile.MinGW
@@ -37,7 +37,7 @@ OBJS1 = trimlist.o display.o getdphi.o pctile.o ccf65.o \
 	lenmsk.o decodemsk.o ping.o makepings.o alignmsg.o match.o \
 	rtping.o jtmsk.o hipass.o setupmsk.o foldmsk.o genjt9.o \
 	packbits.o unpackbits.o encode232.o interleave9.o entail.o \
-	fano232.o
+	fano232.o spec9.o
 
 libm65.a: $(OBJS1)
 	ar cr libm65.a $(OBJS1) 
diff --git a/libm65/genjt9.f90 b/libm65/genjt9.f90
index b401ee479..1f1099d0f 100644
--- a/libm65/genjt9.f90
+++ b/libm65/genjt9.f90
@@ -31,10 +31,10 @@ subroutine genjt9(message,minutes,msgsent,d6)
   call encode232(d1,nsym2,d2)        !Convolutional code, K=32, r=1/2
   call interleave9(d2,1,d3)          !Interleave the single bits
   call packbits(d3,nsym2,3,d4)       !Pack 3-bit groups into words
-  d5=d4
-  print*,d5
-  
-!  call graycode(d4,69,1,d5)          !Apply Gray code
+
+!  d5=d4
+!  print*,d5
+  call graycode(d4,69,1,d5)          !Apply Gray code
 
 ! Insert sync symbols (ntone=0) and add 1 to the data-tone numbers.
   j=0
diff --git a/libm65/jt9sim.f90 b/libm65/jt9sim.f90
index 870ed436e..1e69aa7e4 100644
--- a/libm65/jt9sim.f90
+++ b/libm65/jt9sim.f90
@@ -4,23 +4,19 @@ program jt9sim
 
   parameter (NMAX=1800*12000)
   integer ihdr(11)
-  integer*2 iwave                     !Generated waveform (no noise)
+  integer*2 iwave                  !Generated waveform (no noise)
   real*8 f0,f,dt,twopi,phi,dphi,baud,fspan
   character msg*22,msg0*22,message*22,msgsent*22,arg*8,fname*11
-  integer*4 itone(85)
 
-  integer*4 mettab(0:255,0:1)
-  integer*4 t0(13)              !72-bit message as 6-bit words
-  integer*1 t1(13)              !72 bits and zero tail as 8-bit bytes
-  integer*1 t2(207)             !Encoded information-carrying bits
-  integer*1 t3(207)             !Bits from t4, after interleaving
-  integer*4 t4(69)              !Symbols from t5, values 0-7
-  integer*4 t5(69)              !Gray-coded symbols, values 0-7
-  integer*4 t6(85)              !Channel symbols including sync, values 0-8
-  integer*1 tmp(72)
+  integer*4 itone(85)              !Channel symbols (values 0-8)
+  integer*4 i4DataSymNoGray(69)    !Data Symbols, values 0-7
+  integer*1 i1ScrambledBits(207)   !Hard-decision demodulated bits, interleaved
+  integer*1 i1Bits(207)          !Encoded information-carrying bits
+  integer*1 i1SoftSymbols(207)
   integer*1 i1
   equivalence (i1,i4)
-  integer isync(85)             !Sync vector
+
+  integer isync(85)                !Sync vector
   data isync/                                    &
        1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,  &
        1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,1,0,  &
@@ -70,18 +66,6 @@ program jt9sim
   
   open(12,file='msgs.txt',status='old')
 
-! Get the metric table
-  bias=0.37                          !To be optimized, in decoder program
-  scale=10                           !  ... ditto ...
-  open(19,file='met8.21',status='old')
-
-  do i=0,255
-     read(19,*) x00,x0,x1
-     mettab(i,0)=nint(scale*(x0-bias))
-     mettab(i,1)=nint(scale*(x1-bias))    !### Check range, etc.  ###
-  enddo
-  close(19)
-
   write(*,1000)
 1000 format('File  N    freq      S/N  Message'/    &
             '---------------------------------------------------')
@@ -147,51 +131,26 @@ program jt9sim
      write(10) ihdr,iwave(1:npts)
      close(10)
 
-! We're done!  Now decode the data in itone, as a test.
+! We're done!  Now decode the data symbols from itone, as a test.
      j=0
      do i=1,85
         if(isync(i).eq.1) cycle
         j=j+1
-        t5(j)=itone(i)-1
+        i4DataSymNoGray(j)=igray(itone(i)-1,-1)
      enddo
 
-!     call graycode(t5,69,-1,t4)
-     t4=t5
-     call unpackbits(t4,69,3,t3)
-!     call interleave9(t3,-1,t2)
-     t2=t3
+     call unpackbits(i4DataSymNoGray,69,3,i1ScrambledBits)
+     call interleave9(i1ScrambledBits,-1,i1Bits)
 
-     nbits=72
-     ndelta=17
-     limit=1000
      do i=1,206
         i4=-10
-        if(t2(i).eq.1) i4=10
+        if(i1Bits(i).eq.1) i4=10
         i4=i4+128
-        t2(i)=i1
+        i1SoftSymbols(i)=i1
      enddo
 
-     print*,t2
-  
-     call fano232(t2,nbits+31,mettab,ndelta,limit,t1,ncycles,metric,ierr,   &
-          maxmetric,maxnp)
-     print*,ncycles
+     call decode9(i1SoftSymbols,msg)
 
-     nbytes=(nbits+7)/8
-     do i=1,nbytes
-        n=t1(i)
-        t4(i)=iand(n,255)
-     enddo
-     call unpackbits(t4,nbytes,8,tmp)
-     call packbits(tmp,12,6,t4)
-     do i=1,12
-        if(t4(i).lt.128) t1(i)=t4(i)
-        if(t4(i).ge.128) t1(i)=t4(i)-256
-     enddo
-     do i=1,12
-        t4(i)=t1(i)
-     enddo
-     call unpackmsg(t4,msg)         !Unpack decoded msg
      if(msg.ne.msg0) print*,'Decode error: ',msg0,' ',msg
 
   enddo
diff --git a/mainwindow.cpp b/mainwindow.cpp
index 48d16902e..b4b246613 100644
--- a/mainwindow.cpp
+++ b/mainwindow.cpp
@@ -1,4 +1,4 @@
-//-------------------------------------------------------------- MainWindow
+//--------------------------------------------------------------- MainWindow
 #include "mainwindow.h"
 #include "ui_mainwindow.h"
 #include "devsetup.h"