diff --git a/Makefile.in b/Makefile.in index c270661f3..88443a8ec 100644 --- a/Makefile.in +++ b/Makefile.in @@ -4,13 +4,14 @@ LDFLAGS = @LDFLAGS@ CPPFLAGS = @CPPFLAGS@ CFLAGS = @CFLAGS@ # WSJT specific C flags -CFLAGS += -DBIGSYM=1 +CFLAGS += -DBIGSYM=1 -fPIC DEFS = @DEFS@ CFLAGS += ${DEFS} -CPPFLAGS += ${DEFS} +CPPFLAGS += ${DEFS} -I. # WSJT specific Fortran flags -FFLAGS += -cpp -Wall -fbounds-check -ftrace=full -fno-second-underscore +FFLAGS += -Wall -fbounds-check -fno-second-underscore -ffixed-line-length-none -fPIC +#FFLAGS += -Wall -fbounds-check -fno-second-underscore -fPIC #FFLAGS += -cpp -fno-second-underscore # The default rules .c.o: @@ -19,8 +20,8 @@ FFLAGS += -cpp -Wall -fbounds-check -ftrace=full -fno-second-underscore .f.o: ${G95} ${CPPFLAGS} ${FFLAGS} -c -o ${<:.f=.o} $< -.f90.o: - ${G95} ${CPPFLAGS} ${FFLAGS} -c -o ${<:.f90=.o} $< +.F90.o: + ${G95} ${CPPFLAGS} ${FFLAGS} -c -o ${<:.F90=.o} $< OS=@OS@ G95=@G95@ @@ -44,11 +45,11 @@ OBJS1 = JT65code.o nchar.o grid2deg.o packmsg.o packtext.o \ F2PYONLY = ftn_init ftn_quit audio_init spec getfile azdist0 astro0 -SRCS2F90 = abc441.f90 astro0.f90 audio_init.f90 azdist0.f90 \ - blanker.f90 decode1.f90 decode2.f90 decode3.f90 ftn_init.f90 \ - ftn_quit.f90 get_fname.f90 getfile.f90 horizspec.f90 hscroll.f90 \ - i1tor4.f90 pix2d.f90 pix2d65.f90 rfile.f90 savedata.f90 spec.f90 \ - wsjtgen.f90 runqqq.f90 fivehz.f90 +SRCS2F90 = abc441.F90 astro0.F90 audio_init.F90 azdist0.f90 \ + blanker.f90 decode1.F90 decode2.f90 decode3.F90 ftn_init.F90 \ + ftn_quit.f90 get_fname.F90 getfile.F90 horizspec.f90 hscroll.f90 \ + i1tor4.f90 pix2d.f90 pix2d65.f90 rfile.f90 savedata.F90 spec.f90 \ + wsjtgen.F90 runqqq.F90 fivehz.F90 OBJS2F90 = ${SRCS2F90:.f90=.o} SRCS2F77 = wsjt1.f astro.f azdist.f coord.f dcoord.f deg2grid.f \ @@ -64,7 +65,7 @@ SRCS2F77 = wsjt1.f astro.f azdist.f coord.f dcoord.f deg2grid.f \ interleave63.f k2grid.f limit.f lpf1.f deep65.f morse.f \ nchar.f packcall.f packgrid.f packmsg.f packtext.f setup65.f \ short65.f slope.f spec2d65.f sync65.f unpackcall.f \ - unpackgrid.f unpackmsg.f unpacktext.f xcor.f xfft.f wsjt65.f + unpackgrid.f unpackmsg.f unpacktext.f xcor.f xfft.f xfft2.f wsjt65.f OBJS2F77 = ${SRCS2F77:.f=.o} SRCS2C = init_rs.c encode_rs.c decode_rs.c @@ -101,7 +102,7 @@ wsjt6: Audio.so #wsjt.spec # # Audio.so: $(OBJS2C) $(OBJS3C) $(OBJS2F77) $(SRCS2F90) $(AUDIOSRCS) - ${F2PY} -c --quiet --opt="-O -cpp -D${CFLAGS} \ + ${F2PY} -c --quiet --opt="-O ${CFLAGS} \ -fno-second-underscore" $(OBJS2C) $(OBJS2F77) -m Audio \ --f77exec=${G95} --f90exec=${G95} ${CPPFLAGS} ${LDFLAGS} \ only: $(F2PYONLY) \ diff --git a/Makefile.linux.g95 b/Makefile.linux.g95 new file mode 100644 index 000000000..256ef3356 --- /dev/null +++ b/Makefile.linux.g95 @@ -0,0 +1,121 @@ +CC ?= gcc +FFLAGS = -g -O2 +LDFLAGS = -L/usr/local/lib -lpthread -lasound +CPPFLAGS = -I/usr/local/include -I/usr/include/alsa +CFLAGS = -Wall -O0 -g -Wall -O0 -g +# WSJT specific C flags +CFLAGS += -DBIGSYM=1 +DEFS = -DPACKAGE_NAME=\"wsjt\" -DPACKAGE_TARNAME=\"wsjt\" -DPACKAGE_VERSION=\"5.9.2\" -DPACKAGE_STRING=\"wsjt\ 5.9.2\" -DPACKAGE_BUGREPORT=\"\" -DG95_LIB_PATH=\"/u/g95/g95-install/bin/../lib/gcc-lib/i686-pc-linux-gnu/4.0.1//\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_ERRNO_H=1 -DHAVE_SYS_SYSLOG_H=1 -DHAVE_STDDEF_H=1 -DHAVE_LIBGEN_H=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_WAIT_H=1 -DHAVE_STDIO_H=1 -DHAVE_TERMIOS_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_LINUX_PPDEV_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_FCNTL_H=1 -DHAVE_SYS_IOCTL_H=1 -DTIME_WITH_SYS_TIME=1 -DSTRING_WITH_STRINGS=1 -DSIZEOF_INT64_T=8 -DSIZEOF_LONG_LONG=8 -DNDEBUG=1 -DPREFIX=\"/usr/local/\" -DUSE_SERIAL=1 -DUSE_ALSA=1 -DHAS_ASOUNDLIB_H=1 -DHAS_SOUNDCARD_H=1 -DHAS_SAMPLERATE_H=1 +CFLAGS += ${DEFS} +CPPFLAGS += ${DEFS} + +# WSJT specific Fortran flags +#FFLAGS += -Wall -fbounds-check -fno-second-underscore -ffixed-line-length-none +FFLAGS += -Wall -fbounds-check -fno-second-underscore +#FFLAGS += -cpp -fno-second-underscore +# The default rules +.c.o: + ${CC} ${CPPFLAGS} ${CFLAGS} -c -o ${<:.c=.o} $< + +.f.o: + ${G95} ${CPPFLAGS} ${FFLAGS} -c -o ${<:.f=.o} $< + +.F90.o: + ${G95} ${CPPFLAGS} ${FFLAGS} -c -o ${<:.F90=.o} $< + +OS=Linux +G95=/usr/X11R6/bin/g95 +COMPILER=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6// +#COMPILER=/u/g95/g95-install/bin/../lib/gcc-lib/i686-pc-linux-gnu/4.0.1// +FC=/usr/X11R6/bin/g95 + +LDFLAGS += -L${COMPILER} +LDFLAGS += -lg2c + +PYTHON ?= /usr/X11R6/bin/python +RM ?= /usr/X11R6/bin/rm +F2PY = /usr/X11R6/bin/f2py + + +OBJS1 = JT65code.o nchar.o grid2deg.o packmsg.o packtext.o \ + packcall.o packgrid.o unpackmsg.o unpacktext.o unpackcall.o \ + unpackgrid.o deg2grid.o packdxcc.o chkmsg.o getpfx1.o \ + getpfx2.o k2grid.o grid2k.o interleave63.o graycode.o set.o \ + igray.o init_rs_int.o encode_rs_int.o decode_rs_int.o \ + wrapkarn.o + +F2PYONLY = ftn_init ftn_quit audio_init spec getfile azdist0 astro0 + +SRCS2F90 = abc441.F90 astro0.F90 audio_init.F90 azdist0.f90 \ + blanker.f90 decode1.F90 decode2.f90 decode3.F90 ftn_init.F90 \ + ftn_quit.f90 get_fname.F90 getfile.F90 horizspec.f90 hscroll.f90 \ + i1tor4.f90 pix2d.f90 pix2d65.f90 rfile.f90 savedata.F90 spec.f90 \ + wsjtgen.F90 runqqq.F90 fivehz.F90 +OBJS2F90 = ${SRCS2F90:.f90=.o} + +SRCS2F77 = wsjt1.f astro.f azdist.f coord.f dcoord.f deg2grid.f \ + dot.f ftsky.f geocentric.f GeoDist.f grid2deg.f moon2.f \ + MoonDop.f sun.f toxyz.f pfxdump.f \ + avesp2.f bzap.f spec441.f spec2d.f mtdecode.f stdecode.f \ + indexx.f s2shape.f flat2.f gen65.f chkmsg.f gen6m.f gentone.f \ + syncf0.f syncf1.f synct.f decode6m.f avemsg6m.f \ + set.f flatten.f db.f pctile.f sort.f ssort.f ps.f smooth.f \ + ping.f longx.f peakup.f sync.f detect.f avemsg65.f decode65.f \ + demod64a.f encode65.f extract.f flat1.f four2.f rfile2.f \ + gencw.f getpfx1.f getpfx2.f getsnr.f graycode.f grid2k.f \ + interleave63.f k2grid.f limit.f lpf1.f deep65.f morse.f \ + nchar.f packcall.f packgrid.f packmsg.f packtext.f setup65.f \ + short65.f slope.f spec2d65.f sync65.f unpackcall.f \ + unpackgrid.f unpackmsg.f unpacktext.f xcor.f xfft.f xfft2.f wsjt65.f +OBJS2F77 = ${SRCS2F77:.f=.o} + +SRCS2C = init_rs.c encode_rs.c decode_rs.c +OBJS2C = ${SRCS2C:.c=.o} + +# ok, so far for now +# Windows start_alsa.c will be a2d.f90 jtaudio.c since it uses portaudio +# for *nix start_alsa.c will also be a2d.f90, jtaudio.c +# and start_portaudio.c for systems using portaudio +# for *nix start_alsa.c will be start_alsa.c for alsa +# for *nix start_alsa.c will be start_oss.c for oss +# +# ptt_unix.c vs. ptt.c I'll sort out later. +# ditto for cutil.c (only used on *nix) +# --db +# jtaudio.c/start_threads.c mess will have to be sorted out later +# to minimise #ifdef's +# --db +# and mostly sorted +# --db +# +SRCS3C = ptt_unix.c igray.c wrapkarn.c cutil.c +OBJS3C = ${SRCS3C:.c=.o} +AUDIOSRCS = start_alsa.c + +all: wsjt6 +JT65code: $(OBJS1) + $(FC) -o JT65code $(OBJS1) + +wsjt6: Audio.so #wsjt.spec +# ${PYTHON} c:\python23\installer\Build.py wsjt.spec +# ${RM} wsjt6 + +# +# +Audio.so: $(OBJS2C) $(OBJS3C) $(OBJS2F77) $(SRCS2F90) $(AUDIOSRCS) + ${F2PY} -c --quiet --opt="-O -D${CFLAGS} \ + -fno-second-underscore" $(OBJS2C) $(OBJS2F77) -m Audio \ + --f77exec=${G95} --f90exec=${G95} ${CPPFLAGS} ${LDFLAGS} \ + only: $(F2PYONLY) \ + : $(SRCS2F90) \ + ${SRCS3C} ${AUDIOSRCS} + +wsjt.spec: wsjt.py astro.py g.py options.py palettes.py smeter.py specjt.py +# ${PYTHON} c:\python23\installer\makespec.py --icon wsjt.ico \ +# --tk --onefile wsjt.py + + +.PHONY : clean +clean: + ${RM} -f *.o *.so *~ JT65code wsjt6 + diff --git a/Makefile.linux.gfortran b/Makefile.linux.gfortran new file mode 100644 index 000000000..bd9608559 --- /dev/null +++ b/Makefile.linux.gfortran @@ -0,0 +1,120 @@ +CC ?= gcc +FFLAGS = -g -O2 -fPIC +LDFLAGS = -L/usr/local/lib -lpthread -lasound +CPPFLAGS = -I/usr/local/include -I/usr/include/alsa -I. +CFLAGS = -Wall -O0 -g -Wall -O0 -g -fPIC +# WSJT specific C flags +CFLAGS += -DBIGSYM=1 +DEFS = -DPACKAGE_NAME=\"wsjt\" -DPACKAGE_TARNAME=\"wsjt\" -DPACKAGE_VERSION=\"5.9.2\" -DPACKAGE_STRING=\"wsjt\ 5.9.2\" -DPACKAGE_BUGREPORT=\"\" -DG95_LIB_PATH=\"/usr/lib/gcc/x86_64-linux-gnu/4.0.3/\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_ERRNO_H=1 -DHAVE_SYS_SYSLOG_H=1 -DHAVE_STDDEF_H=1 -DHAVE_LIBGEN_H=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_WAIT_H=1 -DHAVE_STDIO_H=1 -DHAVE_TERMIOS_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_LINUX_PPDEV_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_FCNTL_H=1 -DHAVE_SYS_IOCTL_H=1 -DTIME_WITH_SYS_TIME=1 -DSTRING_WITH_STRINGS=1 -DSIZEOF_INT64_T=8 -DSIZEOF_LONG_LONG=8 -DNDEBUG=1 -DPREFIX=\"/usr/local/\" -DUSE_SERIAL=1 -DUSE_ALSA=1 -DHAS_ASOUNDLIB_H=1 -DHAS_SOUNDCARD_H=1 +CFLAGS += ${DEFS} +CPPFLAGS += ${DEFS} + +# WSJT specific Fortran flags +FFLAGS += -Wall -fbounds-check -fno-second-underscore -ffixed-line-length-none +#FFLAGS += -Wall -fbounds-check -fno-second-underscore +#FFLAGS += -cpp -fno-second-underscore +# The default rules +.c.o: + ${CC} ${CPPFLAGS} ${CFLAGS} -c -o ${<:.c=.o} $< + +.f.o: + ${G95} ${CPPFLAGS} ${FFLAGS} -c -o ${<:.f=.o} $< + +.F90.o: + ${G95} ${CPPFLAGS} ${FFLAGS} -c -o ${<:.F90=.o} $< + +OS=Linux +G95=/usr/bin/g95 +COMPILER=/usr/lib/gcc/x86_64-linux-gnu/4.0.3/ +FC=/usr/bin/g95 + +LDFLAGS += -L${COMPILER} +LDFLAGS += -lg2c + +PYTHON ?= /usr/bin/python +RM ?= /bin/rm +F2PY = /usr/bin/f2py + + +OBJS1 = JT65code.o nchar.o grid2deg.o packmsg.o packtext.o \ + packcall.o packgrid.o unpackmsg.o unpacktext.o unpackcall.o \ + unpackgrid.o deg2grid.o packdxcc.o chkmsg.o getpfx1.o \ + getpfx2.o k2grid.o grid2k.o interleave63.o graycode.o set.o \ + igray.o init_rs_int.o encode_rs_int.o decode_rs_int.o \ + wrapkarn.o + +F2PYONLY = ftn_init ftn_quit audio_init spec getfile azdist0 astro0 + +SRCS2F90 = abc441.F90 astro0.F90 audio_init.F90 azdist0.f90 \ + blanker.f90 decode1.F90 decode2.f90 decode3.F90 ftn_init.F90 \ + ftn_quit.f90 get_fname.F90 getfile.F90 horizspec.f90 hscroll.f90 \ + i1tor4.f90 pix2d.f90 pix2d65.f90 rfile.f90 savedata.F90 spec.f90 \ + wsjtgen.F90 runqqq.F90 fivehz.F90 +OBJS2F90 = ${SRCS2F90:.f90=.o} + +SRCS2F77 = wsjt1.f astro.f azdist.f coord.f dcoord.f deg2grid.f \ + dot.f ftsky.f geocentric.f GeoDist.f grid2deg.f moon2.f \ + MoonDop.f sun.f toxyz.f pfxdump.f \ + avesp2.f bzap.f spec441.f spec2d.f mtdecode.f stdecode.f \ + indexx.f s2shape.f flat2.f gen65.f chkmsg.f gen6m.f gentone.f \ + syncf0.f syncf1.f synct.f decode6m.f avemsg6m.f \ + set.f flatten.f db.f pctile.f sort.f ssort.f ps.f smooth.f \ + ping.f longx.f peakup.f sync.f detect.f avemsg65.f decode65.f \ + demod64a.f encode65.f extract.f flat1.f four2.f rfile2.f \ + gencw.f getpfx1.f getpfx2.f getsnr.f graycode.f grid2k.f \ + interleave63.f k2grid.f limit.f lpf1.f deep65.f morse.f \ + nchar.f packcall.f packgrid.f packmsg.f packtext.f setup65.f \ + short65.f slope.f spec2d65.f sync65.f unpackcall.f \ + unpackgrid.f unpackmsg.f unpacktext.f xcor.f xfft.f xfft2.f wsjt65.f +OBJS2F77 = ${SRCS2F77:.f=.o} + +SRCS2C = init_rs.c encode_rs.c decode_rs.c +OBJS2C = ${SRCS2C:.c=.o} + +# ok, so far for now +# Windows start_alsa.c will be a2d.f90 jtaudio.c since it uses portaudio +# for *nix start_alsa.c will also be a2d.f90, jtaudio.c +# and start_portaudio.c for systems using portaudio +# for *nix start_alsa.c will be start_alsa.c for alsa +# for *nix start_alsa.c will be start_oss.c for oss +# +# ptt_unix.c vs. ptt.c I'll sort out later. +# ditto for cutil.c (only used on *nix) +# --db +# jtaudio.c/start_threads.c mess will have to be sorted out later +# to minimise #ifdef's +# --db +# and mostly sorted +# --db +# +SRCS3C = ptt_unix.c igray.c wrapkarn.c cutil.c +OBJS3C = ${SRCS3C:.c=.o} +AUDIOSRCS = start_alsa.c + +all: wsjt6 +JT65code: $(OBJS1) + $(FC) -o JT65code $(OBJS1) + +wsjt6: Audio.so #wsjt.spec +# ${PYTHON} c:\python23\installer\Build.py wsjt.spec +# ${RM} wsjt6 + +# +# +Audio.so: $(OBJS2C) $(OBJS3C) $(OBJS2F77) $(SRCS2F90) $(AUDIOSRCS) + ${F2PY} -c --opt="-O ${CFLAGS} -fPIC \ + -fno-second-underscore" $(OBJS2C) $(OBJS2F77) -m Audio \ + --f77exec=${G95} --f90exec=${G95} ${CPPFLAGS} ${LDFLAGS} \ + only: $(F2PYONLY) \ + : $(SRCS2F90) \ + ${SRCS3C} ${AUDIOSRCS} + +wsjt.spec: wsjt.py astro.py g.py options.py palettes.py smeter.py specjt.py +# ${PYTHON} c:\python23\installer\makespec.py --icon wsjt.ico \ +# --tk --onefile wsjt.py + + +.PHONY : clean +clean: + ${RM} -f *.o *.so *~ JT65code wsjt6 + diff --git a/abc441.f90 b/abc441.F90 similarity index 100% rename from abc441.f90 rename to abc441.F90 diff --git a/astro.f b/astro.F similarity index 100% rename from astro.f rename to astro.F diff --git a/astro0.f90 b/astro0.F90 similarity index 100% rename from astro0.f90 rename to astro0.F90 diff --git a/audio_init.f90 b/audio_init.F90 similarity index 100% rename from audio_init.f90 rename to audio_init.F90 diff --git a/bzap.f b/bzap.f index aa26fea5e..294570f80 100644 --- a/bzap.f +++ b/bzap.f @@ -32,7 +32,7 @@ C This is a kludge: ib=(fzap(izap)+tol)/df smax=0. do i=ia+1,ib+1 - s=real(c(i))**2 + imag(c(i))**2 + s=real(c(i))**2 + aimag(c(i))**2 if(s.gt.smax) then smax=s ipk=i diff --git a/configure b/configure index 41f532230..7c3eb9082 100755 --- a/configure +++ b/configure @@ -1,21 +1,12 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.53 for wsjt 5.9.2. +# Generated by GNU Autoconf 2.59 for wsjt 5.9.2. # -# $Id: configure.ac 113 2006-01-16 02:07:25Z va3db $ +# $Id: configure.ac 127 2006-02-20 20:46:33Z va3db $ # -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - - ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -24,46 +15,57 @@ fi if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +DUALCASE=1; export DUALCASE # for MKS sh -# NLS nuisances. # Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi # Name of the executable. -as_me=`(basename "$0") 2>/dev/null || +as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -74,6 +76,7 @@ echo X/"$0" | /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` + # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -84,15 +87,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conftest.sh + rm -f conf$$.sh fi @@ -140,6 +143,8 @@ do as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -212,13 +217,20 @@ else fi rm -f conf$$ conf$$.exe conf$$.file +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS @@ -228,7 +240,7 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } +$as_unset CDPATH # Name of the host. @@ -242,6 +254,7 @@ exec 6>&1 # Initializations. # ac_default_prefix=/usr/local +ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= @@ -298,6 +311,8 @@ ac_includes_default="\ # include #endif" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT F77 FFLAGS ac_ct_F77 CPP EGREP SET_MAKE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA RM CP MV LN SED AR LD TEST PYTHON F2PY G95 G95_LIB_PATH OS CLOBBER AUDIO LIBOBJS LTLIBOBJS' +ac_subst_files='' # Initialize some variables set by options. ac_init_help= @@ -655,7 +670,7 @@ done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir + localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in @@ -695,10 +710,10 @@ if test -z "$srcdir"; then # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } @@ -721,6 +736,9 @@ if test ! -r $srcdir/$ac_unique_file; then { (exit 1); exit 1; }; } fi fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias @@ -795,9 +813,9 @@ _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -889,12 +907,45 @@ case $srcdir in ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. @@ -905,13 +956,13 @@ ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then + test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi - cd $ac_popdir + cd "$ac_popdir" done fi @@ -919,14 +970,13 @@ test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF wsjt configure 5.9.2 -generated by GNU Autoconf 2.53 +generated by GNU Autoconf 2.59 -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -Free Software Foundation, Inc. +Copyright (C) 2003 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. -$Id: configure.ac 113 2006-01-16 02:07:25Z va3db $ +$Id: configure.ac 127 2006-02-20 20:46:33Z va3db $ _ACEOF exit 0 fi @@ -936,7 +986,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by wsjt $as_me 5.9.2, which was -generated by GNU Autoconf 2.53. Invocation command line was +generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ @@ -988,27 +1038,54 @@ _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= +ac_configure_args0= +ac_configure_args1= ac_sep= -for ac_arg +ac_must_keep_next=false +for ac_pass in 1 2 do - case $ac_arg in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n ) continue ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - esac - # Get rid of the leading space. + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1019,6 +1096,7 @@ trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo + cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## @@ -1031,16 +1109,45 @@ _ASBOX case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## @@ -1048,14 +1155,14 @@ _ASBOX ## ----------- ## _ASBOX echo - sed "/^$/d" confdefs.h + sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 - rm -f core core.* *.core && + rm -f core *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 @@ -1135,7 +1242,7 @@ fi # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" @@ -1152,13 +1259,13 @@ echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. @@ -1214,6 +1321,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + OLD_CFLAGS="$CFLAGS" @@ -1421,9 +1529,7 @@ if test $ac_prog_rejected = yes; then # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$as_dir/$ac_word" ${1+"$@"} - shift - ac_cv_prog_CC="$@" + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi @@ -1528,8 +1634,10 @@ fi fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. @@ -1553,15 +1661,12 @@ ac_compiler=`set X $ac_compile; echo $2` (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1571,12 +1676,12 @@ main () } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe" +ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output" >&5 -echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 @@ -1590,26 +1695,39 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= -for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; - ls a.out conftest 2>/dev/null; - ls a.* conftest.* 2>/dev/null`; do +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; - a.out ) # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool --akim. - export ac_cv_exeext - break;; - * ) break;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; esac done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 -echo "$as_me: error: C compiler cannot create executables" >&2;} +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi @@ -1636,9 +1754,11 @@ if test "$cross_compiling" != yes; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&5 +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&2;} +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi @@ -1646,7 +1766,7 @@ fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 -rm -f a.out a.exe conftest$ac_cv_exeext +rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. @@ -1666,18 +1786,21 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. -for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; + export ac_cv_exeext + break;; * ) break;; esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -1694,15 +1817,12 @@ if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1719,16 +1839,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -1744,15 +1867,12 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1766,11 +1886,20 @@ main () _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -1779,10 +1908,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_compiler_gnu=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi @@ -1798,15 +1928,12 @@ if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1817,11 +1944,20 @@ main () _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -1830,10 +1966,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_prog_cc_g=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 @@ -1852,6 +1989,120 @@ else CFLAGS= fi fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide @@ -1863,19 +2114,27 @@ cat >conftest.$ac_ext <<_ACEOF _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ - ''\ - '#include ' \ + '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ @@ -1883,16 +2142,13 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif +#include int main () { @@ -1903,11 +2159,20 @@ exit (42); _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -1916,20 +2181,18 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 : else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + continue fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -1940,11 +2203,20 @@ exit (42); _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -1953,9 +2225,10 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then @@ -1966,9 +2239,10 @@ fi else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -1986,7 +2260,7 @@ ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_f77_compiler_gnu if test -n "$ac_tool_prefix"; then - for ac_prog in g77 f77 xlf cf77 cft77 frt pgf77 fl32 af77 fort77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 lf95 g95 fc + for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 @@ -2028,7 +2302,7 @@ fi fi if test -z "$F77"; then ac_ct_F77=$F77 - for ac_prog in g77 f77 xlf cf77 cft77 frt pgf77 fl32 af77 fort77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 lf95 g95 fc + for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 @@ -2073,7 +2347,7 @@ fi # Provide some information about the compiler. -echo "$as_me:2076:" \ +echo "$as_me:2350:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -2091,9 +2365,10 @@ ac_compiler=`set X $ac_compile; echo $2` ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } +rm -f a.out # If we don't use `.F' as extension, the preprocessor is not run on the -# input file. +# input file. (Note that this only needs to work for GNU compilers.) ac_save_ext=$ac_ext ac_ext=F echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 @@ -2111,11 +2386,20 @@ else _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2124,17 +2408,17 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_compiler_gnu=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_f77_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 ac_ext=$ac_save_ext -G77=`test $ac_compiler_gnu = yes && echo yes` ac_test_FFLAGS=${FFLAGS+set} ac_save_FFLAGS=$FFLAGS FFLAGS= @@ -2151,11 +2435,20 @@ cat >conftest.$ac_ext <<_ACEOF _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2164,10 +2457,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_prog_f77_g=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_prog_f77_g=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 @@ -2175,18 +2469,20 @@ echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 if test "$ac_test_FFLAGS" = set; then FFLAGS=$ac_save_FFLAGS elif test $ac_cv_prog_f77_g = yes; then - if test "$G77" = yes; then + if test "x$ac_cv_f77_compiler_gnu" = xyes; then FFLAGS="-g -O2" else FFLAGS="-g" fi else - if test "$G77" = yes; then + if test "x$ac_cv_f77_compiler_gnu" = xyes; then FFLAGS="-O2" else FFLAGS= fi fi + +G77=`test $ac_compiler_gnu = yes && echo yes` ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -2256,8 +2552,11 @@ else ac_func_search_save_LIBS=$LIBS ac_cv_search_strerror=no cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -2266,12 +2565,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strerror (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2282,11 +2575,20 @@ strerror (); _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2295,15 +2597,20 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_cv_search_strerror="none required" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if test "$ac_cv_search_strerror" = no; then for ac_lib in cposix; do LIBS="-l$ac_lib $ac_func_search_save_LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -2312,12 +2619,6 @@ extern "C" /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strerror (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2328,11 +2629,20 @@ strerror (); _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2342,9 +2652,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext done fi LIBS=$ac_func_search_save_LIBS @@ -2356,103 +2668,6 @@ if test "$ac_cv_search_strerror" != no; then fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - echo "$as_me:$LINENO: checking for inline" >&5 echo $ECHO_N "checking for inline... $ECHO_C" >&6 if test "${ac_cv_c_inline+set}" = set; then @@ -2461,21 +2676,34 @@ else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #ifndef __cplusplus -static $ac_kw int static_foo () {return 0; } -$ac_kw int foo () {return 0; } +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2484,25 +2712,30 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_c_inline=$ac_kw; break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done fi echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 echo "${ECHO_T}$ac_cv_c_inline" >&6 + + case $ac_cv_c_inline in inline | yes) ;; - no) -cat >>confdefs.h <<\_ACEOF -#define inline + *) + case $ac_cv_c_inline in + no) ac_val=;; + *) ac_val=$ac_cv_c_inline;; + esac + cat >>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif _ACEOF - ;; - *) cat >>confdefs.h <<_ACEOF -#define inline $ac_cv_c_inline -_ACEOF - ;; + ;; esac ac_ext=c @@ -2528,24 +2761,34 @@ for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2556,7 +2799,8 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -2565,20 +2809,24 @@ rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2590,7 +2838,8 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -2619,24 +2868,34 @@ for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2647,7 +2906,8 @@ if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -2656,20 +2916,24 @@ rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2681,7 +2945,8 @@ if test -z "$ac_cpp_err"; then continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -2694,8 +2959,10 @@ rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -2706,6 +2973,21 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + if test $ac_cv_c_compiler_gnu = yes; then echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 @@ -2714,13 +2996,16 @@ if test "${ac_cv_prog_gcc_traditional+set}" = set; then else ac_pattern="Autoconf.*'x'" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include Autoconf TIOCGETP _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "$ac_pattern" >/dev/null 2>&1; then + $EGREP "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes else ac_cv_prog_gcc_traditional=no @@ -2730,13 +3015,16 @@ rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include Autoconf TCGETA _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "$ac_pattern" >/dev/null 2>&1; then + $EGREP "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes fi rm -f conftest* @@ -2750,15 +3038,15 @@ echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 fi fi -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: - @echo 'ac_maketemp="${MAKE}"' + @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` @@ -2815,6 +3103,7 @@ ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 @@ -2831,6 +3120,7 @@ do case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -2838,20 +3128,20 @@ case $as_dir/ in # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi done done ;; @@ -3272,8 +3562,8 @@ else echo "${ECHO_T}no" >&6 fi -# Extract the first word of "g95", so it can be a program name with args. -set dummy g95; ac_word=$2 +# Extract the first word of "gfortran", so it can be a program name with args. +set dummy gfortran; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_G95+set}" = set; then @@ -3338,49 +3628,67 @@ if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include #include #include +int +main () +{ + + ; + return 0; +} _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_header_stdc=no +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then + $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -3392,13 +3700,16 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then + $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -3413,16 +3724,20 @@ if test $ac_cv_header_stdc = yes; then : else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else -# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif @@ -3433,7 +3748,7 @@ main () int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) + || toupper (i) != TOUPPER (i)) exit(2); exit (0); } @@ -3453,11 +3768,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi @@ -3483,7 +3799,7 @@ fi for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h + inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_header" >&5 @@ -3492,19 +3808,31 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3513,10 +3841,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + eval "$as_ac_Header=no" fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 @@ -3566,18 +3895,30 @@ else echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3586,10 +3927,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -3597,20 +3939,24 @@ echo "${ECHO_T}$ac_header_compiler" >&6 echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -3621,7 +3967,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -3629,26 +3976,43 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------- ## +## Report this to the wsjt lists. ## +## ------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - eval "$as_ac_Header=$ac_header_preproc" + eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 @@ -3670,18 +4034,15 @@ if test "${ac_cv_header_time+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include #include -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -3693,11 +4054,20 @@ return 0; _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3706,10 +4076,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_header_time=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_header_time=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 echo "${ECHO_T}$ac_cv_header_time" >&6 @@ -3735,18 +4106,30 @@ else echo "$as_me:$LINENO: checking sys/soundcard.h usability" >&5 echo $ECHO_N "checking sys/soundcard.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3755,10 +4138,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -3766,20 +4150,24 @@ echo "${ECHO_T}$ac_header_compiler" >&6 echo "$as_me:$LINENO: checking sys/soundcard.h presence" >&5 echo $ECHO_N "checking sys/soundcard.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -3790,7 +4178,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -3798,19 +4187,36 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: sys/soundcard.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: sys/soundcard.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: sys/soundcard.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: sys/soundcard.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: sys/soundcard.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: sys/soundcard.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------- ## +## Report this to the wsjt lists. ## +## ------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for sys/soundcard.h" >&5 echo $ECHO_N "checking for sys/soundcard.h... $ECHO_C" >&6 @@ -3843,18 +4249,30 @@ else echo "$as_me:$LINENO: checking alsa/asoundlib.h usability" >&5 echo $ECHO_N "checking alsa/asoundlib.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3863,10 +4281,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -3874,20 +4293,24 @@ echo "${ECHO_T}$ac_header_compiler" >&6 echo "$as_me:$LINENO: checking alsa/asoundlib.h presence" >&5 echo $ECHO_N "checking alsa/asoundlib.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -3898,7 +4321,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -3906,19 +4330,36 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------- ## +## Report this to the wsjt lists. ## +## ------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 echo $ECHO_N "checking for alsa/asoundlib.h... $ECHO_C" >&6 @@ -3951,18 +4392,30 @@ else echo "$as_me:$LINENO: checking portaudio.h usability" >&5 echo $ECHO_N "checking portaudio.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3971,10 +4424,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -3982,20 +4436,24 @@ echo "${ECHO_T}$ac_header_compiler" >&6 echo "$as_me:$LINENO: checking portaudio.h presence" >&5 echo $ECHO_N "checking portaudio.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -4006,7 +4464,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -4014,19 +4473,36 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: portaudio.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: portaudio.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: portaudio.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: portaudio.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: portaudio.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: portaudio.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: portaudio.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: portaudio.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: portaudio.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: portaudio.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: portaudio.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: portaudio.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: portaudio.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: portaudio.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: portaudio.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: portaudio.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: portaudio.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: portaudio.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: portaudio.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: portaudio.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: portaudio.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------- ## +## Report this to the wsjt lists. ## +## ------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for portaudio.h" >&5 echo $ECHO_N "checking for portaudio.h... $ECHO_C" >&6 @@ -4059,18 +4535,30 @@ else echo "$as_me:$LINENO: checking samplerate.h usability" >&5 echo $ECHO_N "checking samplerate.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4079,10 +4567,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -4090,20 +4579,24 @@ echo "${ECHO_T}$ac_header_compiler" >&6 echo "$as_me:$LINENO: checking samplerate.h presence" >&5 echo $ECHO_N "checking samplerate.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -4114,7 +4607,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -4122,19 +4616,36 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: samplerate.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: samplerate.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: samplerate.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: samplerate.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: samplerate.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: samplerate.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: samplerate.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: samplerate.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: samplerate.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: samplerate.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: samplerate.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: samplerate.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: samplerate.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: samplerate.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: samplerate.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: samplerate.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: samplerate.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: samplerate.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: samplerate.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: samplerate.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: samplerate.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------- ## +## Report this to the wsjt lists. ## +## ------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for samplerate.h" >&5 echo $ECHO_N "checking for samplerate.h... $ECHO_C" >&6 @@ -4167,11 +4678,20 @@ else _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4180,10 +4700,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 gcc_cv_header_string=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + gcc_cv_header_string=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gcc_cv_header_string" >&5 @@ -4203,15 +4724,12 @@ if test "${ac_cv_type_int64_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4225,11 +4743,20 @@ if (sizeof (int64_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4238,10 +4765,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_int64_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_int64_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_int64_t" >&5 echo "${ECHO_T}$ac_cv_type_int64_t" >&6 @@ -4259,15 +4787,12 @@ else if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4280,11 +4805,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4293,15 +4827,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_lo=0 ac_mid=0 while :; do cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4314,11 +4845,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4327,29 +4867,28 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_hi=$ac_mid; break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4362,11 +4901,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4375,15 +4923,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_hi=-1 ac_mid=-1 while :; do cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4396,11 +4941,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4409,37 +4963,36 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_lo=$ac_mid; break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_lo= ac_hi= fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4452,11 +5005,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4465,37 +5027,37 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_hi=$ac_mid else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_lo=`expr '(' $ac_mid ')' + 1` fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in ?*) ac_cv_sizeof_int64_t=$ac_lo;; -'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int64_t), 77" >&5 -echo "$as_me: error: cannot compute sizeof (int64_t), 77" >&2;} +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int64_t), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (int64_t), 77 +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } ;; esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default long longval () { return (long) (sizeof (int64_t)); } unsigned long ulongval () { return (long) (sizeof (int64_t)); } #include #include -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4538,13 +5100,16 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) -{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int64_t), 77" >&5 -echo "$as_me: error: cannot compute sizeof (int64_t), 77" >&2;} +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int64_t), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (int64_t), 77 +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi rm -f conftest.val @@ -4565,15 +5130,12 @@ if test "${ac_cv_type_long_long+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4587,11 +5149,20 @@ if (sizeof (long long)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4600,10 +5171,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_long_long=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_long_long=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5 echo "${ECHO_T}$ac_cv_type_long_long" >&6 @@ -4621,15 +5193,12 @@ else if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4642,11 +5211,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4655,15 +5233,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_lo=0 ac_mid=0 while :; do cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4676,11 +5251,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4689,29 +5273,28 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_hi=$ac_mid; break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4724,11 +5307,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4737,15 +5329,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_hi=-1 ac_mid=-1 while :; do cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4758,11 +5347,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4771,37 +5369,36 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_lo=$ac_mid; break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_lo= ac_hi= fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4814,11 +5411,20 @@ test_array [0] = 0 _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4827,37 +5433,37 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_hi=$ac_mid else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_lo=`expr '(' $ac_mid ')' + 1` fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in ?*) ac_cv_sizeof_long_long=$ac_lo;; -'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77" >&5 -echo "$as_me: error: cannot compute sizeof (long long), 77" >&2;} +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (long long), 77 +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } ;; esac else if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5 +echo "$as_me: error: internal error: not reached in cross-compile" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default long longval () { return (long) (sizeof (long long)); } unsigned long ulongval () { return (long) (sizeof (long long)); } #include #include -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4900,13 +5506,16 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) -{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77" >&5 -echo "$as_me: error: cannot compute sizeof (long long), 77" >&2;} +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (long long), 77 +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi rm -f conftest.val @@ -4929,15 +5538,12 @@ if test "${ac_cv_type_uint64_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -4951,11 +5557,20 @@ if (sizeof (uint64_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4964,10 +5579,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_uint64_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_uint64_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5 echo "${ECHO_T}$ac_cv_type_uint64_t" >&6 @@ -4978,15 +5594,12 @@ if test "${ac_cv_type_int64_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5000,11 +5613,20 @@ if (sizeof (int64_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5013,10 +5635,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_int64_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_int64_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_int64_t" >&5 echo "${ECHO_T}$ac_cv_type_int64_t" >&6 @@ -5028,15 +5651,12 @@ if test "${ac_cv_type_uint64_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5050,11 +5670,20 @@ if (sizeof (uint64_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5063,10 +5692,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_uint64_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_uint64_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5 echo "${ECHO_T}$ac_cv_type_uint64_t" >&6 @@ -5086,15 +5716,12 @@ if test "${ac_cv_type_int64_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5108,11 +5735,20 @@ if (sizeof (int64_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5121,10 +5757,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_int64_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_int64_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_int64_t" >&5 echo "${ECHO_T}$ac_cv_type_int64_t" >&6 @@ -5146,15 +5783,12 @@ if test "${ac_cv_type_u_int32_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5168,11 +5802,20 @@ if (sizeof (u_int32_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5181,10 +5824,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_u_int32_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_u_int32_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_u_int32_t" >&5 echo "${ECHO_T}$ac_cv_type_u_int32_t" >&6 @@ -5198,15 +5842,12 @@ if test "${ac_cv_type_uint32_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5220,11 +5861,20 @@ if (sizeof (uint32_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5233,10 +5883,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_uint32_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_uint32_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_uint32_t" >&5 echo "${ECHO_T}$ac_cv_type_uint32_t" >&6 @@ -5270,15 +5921,12 @@ if test "${ac_cv_type_u_int16_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5292,11 +5940,20 @@ if (sizeof (u_int16_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5305,10 +5962,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_u_int16_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_u_int16_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_u_int16_t" >&5 echo "${ECHO_T}$ac_cv_type_u_int16_t" >&6 @@ -5322,15 +5980,12 @@ if test "${ac_cv_type_uint16_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5344,11 +5999,20 @@ if (sizeof (uint16_t)) _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5357,10 +6021,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_type_uint16_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_uint16_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_uint16_t" >&5 echo "${ECHO_T}$ac_cv_type_uint16_t" >&6 @@ -5395,17 +6060,14 @@ if test "${ac_cv_c_bigendian+set}" = set; then else # See if sys/param.h defines the BYTE_ORDER macro. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5419,11 +6081,20 @@ main () _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5431,17 +6102,14 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (exit $ac_status); }; }; then # It does; now see whether it defined to BIG_ENDIAN or not. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5455,11 +6123,20 @@ main () _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5468,32 +6145,31 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_cv_c_bigendian=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_c_bigendian=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # It does not; compile a test program. if test "$cross_compiling" = yes; then - # try to guess the endianess by grep'ing values into an object file + # try to guess the endianness by grepping values into an object file ac_cv_c_bigendian=unknown cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -5504,20 +6180,29 @@ main () _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - if fgrep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then ac_cv_c_bigendian=yes fi -if fgrep LiTTleEnDian conftest.$ac_objext >/dev/null ; then +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then if test "$ac_cv_c_bigendian" = unknown; then ac_cv_c_bigendian=no else @@ -5527,13 +6212,17 @@ if fgrep LiTTleEnDian conftest.$ac_objext >/dev/null ; then fi else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ int main () { @@ -5562,14 +6251,15 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) ac_cv_c_bigendian=yes fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 echo "${ECHO_T}$ac_cv_c_bigendian" >&6 @@ -5583,9 +6273,9 @@ _ACEOF no) ;; *) - { { echo "$as_me:$LINENO: error: unknown endianess + { { echo "$as_me:$LINENO: error: unknown endianness presetting ac_cv_c_bigendian=no (or yes) will help" >&5 -echo "$as_me: error: unknown endianess +echo "$as_me: error: unknown endianness presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} { (exit 1); exit 1; }; } ;; esac @@ -5604,18 +6294,30 @@ else echo "$as_me:$LINENO: checking stdarg.h usability" >&5 echo $ECHO_N "checking stdarg.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5624,10 +6326,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -5635,20 +6338,24 @@ echo "${ECHO_T}$ac_header_compiler" >&6 echo "$as_me:$LINENO: checking stdarg.h presence" >&5 echo $ECHO_N "checking stdarg.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -5659,7 +6366,8 @@ if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -5667,19 +6375,36 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: stdarg.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: stdarg.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: stdarg.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: stdarg.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: stdarg.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: stdarg.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: stdarg.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: stdarg.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: stdarg.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: stdarg.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: stdarg.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: stdarg.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: stdarg.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: stdarg.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: stdarg.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: stdarg.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: stdarg.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: stdarg.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: stdarg.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: stdarg.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: stdarg.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------- ## +## Report this to the wsjt lists. ## +## ------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for stdarg.h" >&5 echo $ECHO_N "checking for stdarg.h... $ECHO_C" >&6 @@ -5752,7 +6477,7 @@ _ACEOF fi -ac_config_files="$ac_config_files Makefile" + ac_config_files="$ac_config_files Makefile" @@ -5941,7 +6666,7 @@ cat >confcache <<\_ACEOF # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # -# `ac_cv_env_foo' variables (set or unset) will be overriden when +# `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. @@ -5959,13 +6684,13 @@ _ACEOF # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | @@ -5976,7 +6701,7 @@ _ACEOF t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache -if cmp -s $cache_file confcache; then :; else +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file @@ -5995,13 +6720,13 @@ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ + ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; +s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; -s/^[^=]*=[ ]*$//; +s/^[^=]*=[ ]*$//; }' fi @@ -6015,13 +6740,13 @@ fi cat >confdef2opt.sed <<\_ACEOF t clear : clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g t quote d : quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g s,\[,\\&,g s,\],\\&,g s,\$,$$,g @@ -6038,6 +6763,21 @@ DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` rm -f confdef2opt.sed +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -6052,11 +6792,12 @@ cat >$CONFIG_STATUS <<_ACEOF # configure, is in config.log if it exists. debug=false +ac_cs_recheck=false +ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF - ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -6065,46 +6806,57 @@ cat >>$CONFIG_STATUS <<\_ACEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +DUALCASE=1; export DUALCASE # for MKS sh -# NLS nuisances. # Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi # Name of the executable. -as_me=`(basename "$0") 2>/dev/null || +as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -6115,6 +6867,7 @@ echo X/"$0" | /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` + # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -6125,15 +6878,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conftest.sh + rm -f conf$$.sh fi @@ -6182,6 +6935,8 @@ do as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -6255,13 +7010,20 @@ else fi rm -f conf$$ conf$$.exe conf$$.file +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS @@ -6271,7 +7033,7 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } +$as_unset CDPATH exec 6>&1 @@ -6288,7 +7050,7 @@ _ASBOX cat >&5 <<_CSEOF This file was extended by wsjt $as_me 5.9.2, which was -generated by GNU Autoconf 2.53. Invocation command line was +generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -6328,10 +7090,11 @@ Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit + -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] - instantiate the configuration file FILE + instantiate the configuration file FILE Configuration files: $config_files @@ -6342,11 +7105,10 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ wsjt config.status 5.9.2 -configured by $0, generated by GNU Autoconf 2.53, +configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. +Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir @@ -6363,25 +7125,25 @@ do --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - shift - set dummy "$ac_option" "$ac_optarg" ${1+"$@"} - shift + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift ;; - -*);; *) # This is not an option, so the user has probably given explicit # arguments. + ac_option=$1 ac_need_defaults=false;; esac - case $1 in + case $ac_option in # Handling of the options. _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" - exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; -_ACEOF cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) @@ -6396,13 +7158,16 @@ Try \`$0 --help' for more information." >&2;} --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) - shift - CONFIG_FILES="$CONFIG_FILES $1" + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) - shift - CONFIG_HEADERS="$CONFIG_HEADERS $1" + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 @@ -6417,6 +7182,20 @@ Try \`$0 --help' for more information." >&2;} shift done +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + _ACEOF @@ -6443,6 +7222,9 @@ if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files fi +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { @@ -6451,17 +7233,17 @@ $debug || } # Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} + { - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=$TMPDIR/cs$$-$RANDOM + tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 + echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } @@ -6520,6 +7302,7 @@ s,@F77@,$F77,;t t s,@FFLAGS@,$FFLAGS,;t t s,@ac_ct_F77@,$ac_ct_F77,;t t s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t @@ -6539,6 +7322,8 @@ s,@G95_LIB_PATH@,$G95_LIB_PATH,;t t s,@OS@,$OS,;t t s,@CLOBBER@,$CLOBBER,;t t s,@AUDIO@,$AUDIO,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF @@ -6568,9 +7353,9 @@ _ACEOF (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end @@ -6588,46 +7373,51 @@ for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } ac_builddir=. @@ -6654,12 +7444,45 @@ case $srcdir in ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac case $INSTALL in @@ -6667,11 +7490,6 @@ ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -6681,7 +7499,7 @@ echo "$as_me: creating $ac_file" >&6;} configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." + sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. @@ -6690,26 +7508,32 @@ echo "$as_me: creating $ac_file" >&6;} case $f in -) echo $tmp/stdin ;; [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } - echo $f;; + echo "$f";; *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } - fi;; + fi;; esac done` || { (exit 1); exit 1; } + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub @@ -6758,16 +7582,17 @@ ac_clean_files=$ac_clean_files_save # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null - $SHELL $CONFIG_STATUS || ac_cs_success=false + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi -ac_config_files="$ac_config_files Makefile" - echo diff --git a/configure.ac b/configure.ac index b072e4cb3..cb30a3399 100644 --- a/configure.ac +++ b/configure.ac @@ -81,7 +81,7 @@ AC_PATH_PROG(LD, ld) AC_PATH_PROG(TEST, [test], [test]) AC_PATH_PROG(PYTHON, python) AC_PATH_PROG(F2PY, f2py) -AC_PATH_PROG(G95, g95) +AC_PATH_PROG(G95, gfortran) AC_MSG_CHECKING([g95 lib path]) G95_LIB_PATH=`${G95} -print-file-name=` @@ -324,7 +324,7 @@ AC_SUBST(LDFLAGS, "${LDFLAGS}") AC_SUBST(CFLAGS) AC_OUTPUT -AC_CONFIG_FILES(Makefile) +dnl AC_CONFIG_FILES(Makefile) dnl do summary diff --git a/cutil.c b/cutil.c index 6130c1355..c0de1afb7 100644 --- a/cutil.c +++ b/cutil.c @@ -1,46 +1,45 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + /* FORTRAN: fd = close(filedes) */ -close_(filedes) -int *filedes; +int close_(int *filedes) { return(close(*filedes)); } /* FORTRAN: fd = open(filnam,mode) */ -open_(filnam,mode) -char filnam[]; -int *mode; +int open_(char filnam[], int *mode) { return(open(filnam,*mode)); } /* FORTRAN: fd = creat(filnam,mode) */ -creat_(filnam,mode) -char filnam[]; -int *mode; +int creat_(char filnam[],int *mode) { return(creat(filnam,*mode)); } /* FORTRAN: nread = read(fd,buf,n) */ -read_(fd,buf,n) -int *fd,*n; -char buf[]; +int read_(int *fd, char buf[], int *n) { return(read(*fd,buf,*n)); } /* FORTRAN: nwrt = write(fd,buf,n) */ -write_(fd,buf,n) -int *fd,*n; -char buf[]; +int write_(int *fd, char buf[], int *n) { return(write(*fd,buf,*n)); } /* FORTRAN: ns = lseek(fd,offset,origin) */ -lseek_(fd,offset,origin) -int *fd,*offset,*origin; +int lseek_(int *fd,int *offset, int *origin) { return(lseek(*fd,*offset,*origin)); } /* times(2) */ -times_(buf) -int buf[]; +int times_(struct tms *buf) { return (times(buf)); } @@ -53,34 +52,32 @@ int buf[]; //} /* usleep(3) */ -usleep_(microsec) -unsigned long *microsec; +int usleep_(unsigned long *microsec) { return (usleep(*microsec)); } /* returns random numbers between 0 and 32767 to FORTRAN program */ -iran_(arg) -int *arg; +int iran_(int *arg) { return (rand()); } -exit_(n) -int *n; +int exit_(int *n) { printf("\n\n"); exit(*n); } -#include -time_t time_() + +time_t time_(void) { return time(0); } /* hrtime() */ -double hrtime_() +double hrtime_(void) { - int tv[2],tz[2]; - gettimeofday(tv,tz); - return(tv[0]+1.e-6*tv[1]); + struct timeval tv; + struct timezone tz; + gettimeofday(&tv,&tz); + return(tv.tv_sec+1.e-6*tv.tv_usec); } diff --git a/decode1.f90 b/decode1.F90 similarity index 100% rename from decode1.f90 rename to decode1.F90 diff --git a/decode3.f90 b/decode3.F90 similarity index 100% rename from decode3.f90 rename to decode3.F90 diff --git a/decode6m.f b/decode6m.f index b860b5fdb..b41e4ed9d 100644 --- a/decode6m.f +++ b/decode6m.f @@ -24,7 +24,7 @@ c real s2(128,646) data pua/'0123456789., /#?$ABCDEFGHIJKLMNOPQRSTUVWXYZ'/ data offset/20.6/ - ps(zz)=real(zz)**2 + imag(zz)**2 !Power spectrum function + ps(zz)=real(zz)**2 + aimag(zz)**2 !Power spectrum function C Convert data to baseband (complex result) using quadrature LO. twopi=8*atan(1.d0) diff --git a/deep65.f b/deep65.F similarity index 92% rename from deep65.f rename to deep65.F index 1ac1e36c7..8a084297b 100644 --- a/deep65.f +++ b/deep65.F @@ -8,7 +8,7 @@ character*22 decoded,deepmsg character*22 testmsg(2*MAXCALLS + 2 + MAXRPT) character*15 callgrid(MAXCALLS) - character*80 line + character*180 line character*4 rpt(MAXRPT) logical first integer ncode(63,2*MAXCALLS) @@ -42,8 +42,12 @@ if(ichar(grid(3:3)).eq.0) grid(3:3)=' ' if(ichar(grid(4:4)).eq.0) grid(4:4)=' ' else - read(23,1002,end=20) line - 1002 format(a80) +C read(23,'A80',END=20) line !FIXME: Segfault happened here. + read(23,1002,end=20) line !FIXME: Segfault happened here. + 1002 format (A80) +C Probably due to line only being 80 chars long, and the read not +C limiting the read. +C 1002 format(A80) if(line(1:2).eq.'//') go to 10 i1=index(line,',') if(i1.lt.4) go to 10 diff --git a/detect.f b/detect.f index 6bc10af47..82acbab42 100644 --- a/detect.f +++ b/detect.f @@ -19,10 +19,10 @@ C Compute powers at the tone frequencies using 1-sample steps. csum=csum+c(i) enddo - y(1)=real(csum)**2 + imag(csum)**2 + y(1)=real(csum)**2 + aimag(csum)**2 do i=2,npts-(NSPD-1) csum=csum-c(i-1)+c(i+NSPD-1) - y(i)=real(csum)**2 + imag(csum)**2 + y(i)=real(csum)**2 + aimag(csum)**2 enddo return diff --git a/fivehz.f90 b/fivehz.F90 similarity index 100% rename from fivehz.f90 rename to fivehz.F90 diff --git a/fivehz.h b/fivehz.h new file mode 100644 index 000000000..9a9717e17 --- /dev/null +++ b/fivehz.h @@ -0,0 +1,5 @@ +#include + +void addnoise_(int16_t *n2); +void fivehztx_(void); +void fivehz_(void); diff --git a/ftn_init.f90 b/ftn_init.F90 similarity index 100% rename from ftn_init.f90 rename to ftn_init.F90 diff --git a/gcom1.f90 b/gcom1.f90 index e9515b5bd..abbb013f4 100644 --- a/gcom1.f90 +++ b/gcom1.f90 @@ -2,8 +2,8 @@ !--------------------------------------------------------------------------- integer NRXMAX !Max length of Rx ring buffers integer NTXMAX !Max length of Tx waveform in samples -parameter(NRXMAX=2048*1024) -parameter(NTXMAX=150*11025) +parameter(NRXMAX=2097152) ! =2048*1024 +parameter(NTXMAX=1653750) ! =150*11025 real*8 tbuf !Tsec at time of input callback SoundIn integer ntrbuf !(obsolete?) real*8 Tsec !Present time SoundIn,SoundOut diff --git a/get_fname.f90 b/get_fname.F90 similarity index 100% rename from get_fname.f90 rename to get_fname.F90 diff --git a/getfile.f90 b/getfile.F90 similarity index 92% rename from getfile.f90 rename to getfile.F90 index 304fd584b..cf34c1cf5 100644 --- a/getfile.f90 +++ b/getfile.F90 @@ -6,7 +6,7 @@ subroutine getfile(fname,len) use dflib #endif - parameter (NDMAX=60*11025) + parameter (NDMAX=661500) ! =60*11025 character*(*) fname include 'gcom1.f90' include 'gcom2.f90' diff --git a/horizspec.f90 b/horizspec.f90 index 0ff302411..809192ee8 100644 --- a/horizspec.f90 +++ b/horizspec.f90 @@ -39,7 +39,7 @@ subroutine horizspec(x,brightness,contrast,a) call xfft2(y,nfft) nq=nfft/4 do i=1,nq - ss(i)=real(c(i))**2 + imag(c(i))**2 + ss(i)=real(c(i))**2 + aimag(c(i))**2 enddo p=0. diff --git a/ps.f b/ps.f index 5866849a8..ff54ce245 100644 --- a/ps.f +++ b/ps.f @@ -16,7 +16,7 @@ call xfft(x,nfft) fac=1.0/nfft do i=1,nh - s(i)=fac*(real(c(i))**2 + imag(c(i))**2) + s(i)=fac*(real(c(i))**2 + aimag(c(i))**2) enddo return diff --git a/ptt_unix.c b/ptt_unix.c index 9a3faf158..f34963eea 100644 --- a/ptt_unix.c +++ b/ptt_unix.c @@ -63,15 +63,18 @@ int fd; /* Used for both serial and parallel */ #define TTYNAME "/dev/cuad%d" /* Use non blocking form */ #else #include -#define TTYNAME "/dev/ttyS%d" +#define TTYNAME "/dev/ttyUSB%d" #endif /* Not quite right for size but '%d + 1' should be plenty enough -db */ -#define TTYNAME_SIZE sizeof(TTYNAME)+1 +/* As TTYNAME is a string, just at 20 chars do udevd is happier. */ +/* E.g. USB serial ports appear as /dev/ttyUSB0 */ +#define TTYNAME_SIZE sizeof(TTYNAME)+20 int ptt_(int *nport, int *ntx, int *iptt) { + /* Fixme, nport should be a sting and not a number */ static int nopen=0; int control = TIOCM_RTS | TIOCM_DTR; @@ -87,6 +90,7 @@ ptt_(int *nport, int *ntx, int *iptt) s[TTYNAME_SIZE] = '\0'; /* open the device */ + printf("Opening %s\n", s); if ((fd = open(s, O_RDWR | O_NDELAY)) < 0) { fprintf(stderr, "Can't open %s.\n", s); return(1); diff --git a/runqqq.f90 b/runqqq.F90 similarity index 100% rename from runqqq.f90 rename to runqqq.F90 diff --git a/savedata.f90 b/savedata.F90 similarity index 100% rename from savedata.f90 rename to savedata.F90 diff --git a/setup65.f b/setup65.f index bfc10e8f7..1f2860802 100644 --- a/setup65.f +++ b/setup65.f @@ -52,13 +52,17 @@ C Determine the reference symbols for each data symbol. m=mdat(k) mref(k,1)=mr1 do n=1,10 !Get ref symbol before data - if((m-n.gt.0) .and. pr(m-n).gt.0.0) go to 10 + if((m-n).gt.0) then + if (pr(m-n).gt.0.0) go to 10 + endif enddo go to 12 10 mref(k,1)=m-n 12 mref(k,2)=mr2 do n=1,10 !Get ref symbol after data - if((m+n).le.nsym .and. pr(m+n).gt.0.0) go to 20 + if((m+n).le.nsym) then + if (pr(m+n).gt.0.0) go to 20 + endif enddo go to 22 20 mref(k,2)=m+n @@ -82,13 +86,17 @@ C Now do it all again, using opposite logic on pr(i) m=mdat2(k) mref2(k,1)=mr1 do n=1,10 - if((m-n.gt.0) .and. pr(m-n).lt.0.0) go to 110 + if((m-n).gt.0) then + if (pr(m-n).lt.0.0) go to 110 + endif enddo go to 112 110 mref2(k,1)=m-n 112 mref2(k,2)=mr2 do n=1,10 - if((m+n).le.nsym .and. pr(m+n).lt.0.0) go to 120 + if((m+n).le.nsym) then + if (pr(m+n).lt.0.0) go to 120 + endif enddo go to 122 120 mref2(k,2)=m+n diff --git a/spec.f90 b/spec.f90 index 423eee16e..89e2833af 100644 --- a/spec.f90 +++ b/spec.f90 @@ -141,7 +141,7 @@ subroutine spec(brightness,contrast,logmap,ngain,nspeed,a) call xfft2(x,nfft) do i=1,nq !Accumulate power spectrum - ss(i)=ss(i) + real(c(i))**2 + imag(c(i))**2 + ss(i)=ss(i) + real(c(i))**2 + aimag(c(i))**2 enddo nsum=nsum+1 diff --git a/spec2d.f b/spec2d.f index 47611ccfd..336bcae5d 100644 --- a/spec2d.f +++ b/spec2d.f @@ -34,14 +34,14 @@ C bins are shifted down 5 bins from their natural positions. sum=0. do i=1,NQ - s2(i,n)=real(c(5+i))**2 + imag(c(5+i))**2 + s2(i,n)=real(c(5+i))**2 + aimag(c(5+i))**2 sum=sum+s2(i,n) enddo s(n)=sum/NQ C Accumulate average spectrum for the whole file. do i=1,nh - psavg0(i) = psavg0(i)+ real(c(i))**2 + imag(c(i))**2 + psavg0(i) = psavg0(i)+ real(c(i))**2 + aimag(c(i))**2 enddo enddo diff --git a/spec2d65.f b/spec2d65.f index cc1417149..7ca972843 100644 --- a/spec2d65.f +++ b/spec2d65.f @@ -43,7 +43,7 @@ C Mix sync tone down to f=5*df (==> bin 6 of array cx, after FFT) call four2a(cx,nfft,1,-1,1) do i=1,77 - s(i)=s(i) + real(cx(i))**2 + imag(cx(i))**2 + s(i)=s(i) + real(cx(i))**2 + aimag(cx(i))**2 enddo else diff --git a/spec441.f b/spec441.f index 08c2de568..11fa9f2e1 100644 --- a/spec441.f +++ b/spec441.f @@ -18,7 +18,7 @@ C Returns spectral array and frequency of peak value. call move(dat(j),x,NFFT) call xfft(x,NFFT) do i=1,NH - s(i)=s(i)+real(c(i))**2 + imag(c(i))**2 + s(i)=s(i)+real(c(i))**2 + aimag(c(i))**2 enddo enddo diff --git a/ssort.f b/ssort.f index 9c4cb8f7a..972001e13 100644 --- a/ssort.f +++ b/ssort.f @@ -19,7 +19,7 @@ c = -1 means sort x in decreasing order (ignoring y) c = -2 means sort x in decreasing order and carry y along. integer kflag, n - real x(*), y(*) + real x(n), y(n) real r, t, tt, tty, ty integer i, ij, j, k, kk, l, m, nn integer il(21), iu(21) diff --git a/start_alsa.c b/start_alsa.c index af62504e8..f15ac30bc 100644 --- a/start_alsa.c +++ b/start_alsa.c @@ -4,9 +4,13 @@ #include #include #include +#include +#include "fivehz.h" -#if 0 +#if 1 #define ALSA_LOG +#endif +#if 0 #define ALSA_LOG_BUFFERS #endif #if 0 @@ -22,7 +26,7 @@ typedef struct alsa_driver_s { int open_mode; int has_pause_resume; int is_paused; - int32_t output_sample_rate, input_sample_rate; + uint32_t output_sample_rate, input_sample_rate; double sample_rate_factor; uint32_t num_channels; uint32_t bits_per_sample; @@ -75,7 +79,7 @@ static int ao_alsa_open(alsa_driver_t *this_gen, int32_t *input_rate, snd_pcm_st int err, dir; int open_mode=1; /* NONBLOCK */ /* int open_mode=0; BLOCK */ - int32_t rate=*input_rate; + uint32_t rate=*input_rate; this->input_sample_rate=*input_rate; snd_pcm_hw_params_alloca(¶ms); @@ -83,7 +87,12 @@ static int ao_alsa_open(alsa_driver_t *this_gen, int32_t *input_rate, snd_pcm_st err = snd_output_stdio_attach(&jcd_out, stdout, 0); this->num_channels = 2; - pcm_device="default"; + if (direction == SND_PCM_STREAM_PLAYBACK) { + pcm_device="plug:front"; + } else { + pcm_device="default"; + } + #ifdef ALSA_LOG printf("audio_alsa_out: Audio Device name = %s\n",pcm_device); printf("audio_alsa_out: Number of channels = %d\n",this->num_channels); @@ -114,8 +123,8 @@ static int ao_alsa_open(alsa_driver_t *this_gen, int32_t *input_rate, snd_pcm_st */ err = snd_pcm_hw_params_any(this->audio_fd, params); if (err < 0) { - printf ("audio_alsa_out: broken configuration for this PCM: no configurations available: %s\n"), - snd_strerror(err); + printf ("audio_alsa_out: broken configuration for this PCM: no configurations available: %s\n", + snd_strerror(err)); goto close; } /* set interleaved access */ @@ -378,7 +387,7 @@ int playback_callback(alsa_driver_t *alsa_driver_playback) { result = snd_pcm_writen(this->audio_fd, alsa_playback_buffers, this->period_size); this->tx_offset += this->period_size; if (result != this->period_size) { - printf("Playback write failed. Expected %d samples, sent only %d\n", this->period_size, result); + printf("Playback write failed. Expected %lu samples, sent only %d\n", this->period_size, result); #ifdef ALSA_PLAYBACK_LOG snd_pcm_status_t *pcm_stat; snd_pcm_status_alloca(&pcm_stat); @@ -387,6 +396,7 @@ int playback_callback(alsa_driver_t *alsa_driver_playback) { #endif } fivehztx_(); //Call fortran routine + return result; } int capture_callback(alsa_driver_t *alsa_driver_capture) { @@ -431,6 +441,7 @@ int capture_callback(alsa_driver_t *alsa_driver_capture) { snd_pcm_status_dump(pcm_stat, jcd_out); #endif fivehz_(); //Call fortran routine + return result; } int playback_xrun(alsa_driver_t *alsa_driver_playback) { @@ -441,6 +452,7 @@ int playback_xrun(alsa_driver_t *alsa_driver_playback) { snd_pcm_status(this->audio_fd, pcm_stat); snd_pcm_status_dump(pcm_stat, jcd_out); snd_pcm_prepare(this->audio_fd); + return 0; } int capture_xrun(alsa_driver_t *alsa_driver_capture) { @@ -450,6 +462,7 @@ int capture_xrun(alsa_driver_t *alsa_driver_capture) { printf("capture xrun\n"); snd_pcm_status(this->audio_fd, pcm_stat); snd_pcm_status_dump(pcm_stat, jcd_out); + return 0; } void ao_alsa_loop(void *iarg) { @@ -478,9 +491,9 @@ void ao_alsa_loop(void *iarg) { capture_index = nfds; nfds += capture_nfds; while(1) { - if (poll (pfd, nfds, 100000) < 0) { + if (poll (pfd, nfds, 200000) < 0) { printf("poll failed\n"); - return; + continue; } snd_pcm_poll_descriptors_revents(alsa_driver_playback.audio_fd, &pfd[0], playback_nfds, &playback_revents); snd_pcm_poll_descriptors_revents(alsa_driver_capture.audio_fd, &pfd[capture_index], capture_nfds, &capture_revents); @@ -506,7 +519,7 @@ void ao_alsa_loop(void *iarg) { return; } -extern void decode1_(int *iarg); +void decode1_(void *iarg); int start_threads_(int *ndevin, int *ndevout, short y1[], short y2[], int *nbuflen, int *iwrite, short iwave[], @@ -517,7 +530,7 @@ int start_threads_(int *ndevin, int *ndevout, short y1[], short y2[], { pthread_t thread1,thread2; int iret1,iret2; - int iarg1 = 1,iarg2 = 2; + int iarg1 = 1; //int32_t rate=11025; int32_t rate=*nfsample; alsa_driver_capture.app_buffer_y1 = y1; @@ -537,7 +550,7 @@ int start_threads_(int *ndevin, int *ndevout, short y1[], short y2[], alsa_driver_playback.transmitting = Transmitting; alsa_driver_playback.ndsec = ndsec; // printf("start_threads: creating thread for decode1\n"); - iret1 = pthread_create(&thread1,NULL,decode1_,&iarg1); + iret1 = pthread_create(&thread1,NULL,(void*)&decode1_,&iarg1); /* Open audio card. */ printf("Using ALSA sound.\n"); ao_alsa_open(&alsa_driver_playback, &rate, SND_PCM_STREAM_PLAYBACK); @@ -546,9 +559,10 @@ int start_threads_(int *ndevin, int *ndevout, short y1[], short y2[], /* * Start audio io thread */ - iret2 = pthread_create(&thread2, NULL, ao_alsa_loop, NULL); + iret2 = pthread_create(&thread2, NULL, (void *)&ao_alsa_loop, NULL); snd_pcm_prepare(alsa_driver_capture.audio_fd); snd_pcm_start(alsa_driver_capture.audio_fd); snd_pcm_prepare(alsa_driver_playback.audio_fd); //snd_pcm_start(alsa_driver_playback.audio_fd); + return 0; } diff --git a/sync.f b/sync.f index d8b317c1f..edb438829 100644 --- a/sync.f +++ b/sync.f @@ -2,13 +2,15 @@ C Input data are in the y# arrays: detected sigs in four tone-channels, C before decimation by NSPD. - + parameter (NSPD=25) real y1(npts) real y2(npts) real y3(npts) real y4(npts) real zf(NSPD) + real tmp1 + real tmp2 complex csum integer nsum(NSPD) real z(65538) !Ready for FSK110 @@ -51,7 +53,7 @@ C Now find the apparent baud rate. ia=391.0/df !Was 341/df ib=491.0/df !Was 541/df do i=ia,ib - z(i)=real(cz(i))**2 + imag(cz(i))**2 + z(i)=real(cz(i))**2 + aimag(cz(i))**2 if(z(i).gt.zmax) then zmax=z(i) baud=df*i @@ -64,7 +66,9 @@ C Find phase of signal at 441 Hz. pha=j*twopi/NSPD csum=csum+zf(j)*cmplx(cos(pha),-sin(pha)) enddo - pha=-atan2(imag(csum),real(csum)) + tmp1=aimag(csum) + tmp2=real(csum) + pha=-atan2(tmp1,tmp2) jpk=nint(NSPD*pha/twopi) if(jpk.lt.1) jpk=jpk+NSPD diff --git a/syncf0.f b/syncf0.f index 71207d331..0ac308db4 100644 --- a/syncf0.f +++ b/syncf0.f @@ -10,7 +10,7 @@ C Finds sync tone and determines aproximate values for jstart and f0. complex z equivalence (x,cx) - ps(z)=real(z)**2 + imag(z)**2 !Power spectrum function + ps(z)=real(z)**2 + aimag(z)**2 !Power spectrum function call zero(s2,6*128) !Clear average df=11025./512. diff --git a/syncf1.f b/syncf1.f index 819c871da..11a909643 100644 --- a/syncf1.f +++ b/syncf1.f @@ -17,7 +17,7 @@ C Returns a refined value of f0, the sync-tone frequency. complex z equivalence (x,c) - ps(z)=real(z)**2 + imag(z)**2 !Power spectrum ASF + ps(z)=real(z)**2 + aimag(z)**2 !Power spectrum ASF C Accumulate a high-resolution average spectrum df=11025.0/NFFT diff --git a/synct.f b/synct.f index 90ab90ab0..541e87bc4 100644 --- a/synct.f +++ b/synct.f @@ -10,7 +10,7 @@ C Gets a refined value of jstart. complex c,c1,zz common/hcom/c(NMAX) - ps(zz)=real(zz)**2 + imag(zz)**2 !Power spectrum function + ps(zz)=real(zz)**2 + aimag(zz)**2 !Power spectrum function C Convert data to baseband (complex result) using quadrature LO. twopi=8*atan(1.d0) diff --git a/wsjt.py b/wsjt.py index c94360e8b..1baed18e8 100644 --- a/wsjt.py +++ b/wsjt.py @@ -1,4 +1,4 @@ -#------------------------------------------------------------------ WSJT +#------------------------------------------------------------------- WSJT from Tkinter import * from tkFileDialog import * import Pmw @@ -1279,13 +1279,14 @@ def update(): azdist() g.nfreq=nfreq.get() - g.AzSun,g.ElSun,g.AzMoon,g.ElMoon,g.AzMoonB,g.ElMoonB,g.ntsky, \ - g.ndop,g.ndop00,g.dbMoon,g.RAMoon,g.DecMoon,g.HA8,g.Dgrd, \ - g.sd,g.poloffset,g.MaxNR,g.dfdt,g.dfdt0,g.RaAux,g.DecAux, \ - g.AzAux,g.ElAux = Audio.astro0(utc[0],utc[1],utc[2], \ - utchours,nfreq.get(),options.MyGrid.get().upper(), \ - options.auxra.get()+' '[:9], \ - options.auxdec.get()+' '[:9]) + if Audio.gcom2.ndecoding==0: + g.AzSun,g.ElSun,g.AzMoon,g.ElMoon,g.AzMoonB,g.ElMoonB,g.ntsky, \ + g.ndop,g.ndop00,g.dbMoon,g.RAMoon,g.DecMoon,g.HA8,g.Dgrd, \ + g.sd,g.poloffset,g.MaxNR,g.dfdt,g.dfdt0,g.RaAux,g.DecAux, \ + g.AzAux,g.ElAux = Audio.astro0(utc[0],utc[1],utc[2], \ + utchours,nfreq.get(),options.MyGrid.get().upper(), \ + options.auxra.get()+' '[:9], \ + options.auxdec.get()+' '[:9]) if mode.get()[:4]=='JT65' or mode.get()[:2]=='CW' : graph2.delete(ALL) diff --git a/wsjt1.f b/wsjt1.F similarity index 100% rename from wsjt1.f rename to wsjt1.F diff --git a/wsjtgen.f90 b/wsjtgen.F90 similarity index 96% rename from wsjtgen.f90 rename to wsjtgen.F90 index 70437213c..e2e695489 100644 --- a/wsjtgen.f90 +++ b/wsjtgen.F90 @@ -12,7 +12,7 @@ subroutine wsjtgen parameter (NMSGMAX=28) !Max characters per message parameter (NSPD=25) !Samples per dit parameter (NDPC=3) !Dits per character - parameter (NWMAX=60*11025) !Max length of waveform + parameter (NWMAX=661500) !Max length of waveform = 60*11025 parameter (NTONES=4) !Number of FSK tones integer itone(84) @@ -74,10 +74,13 @@ subroutine wsjtgen go to 999 14 read(18) hdr if(ndata.gt.NTxMax) ndata=NTxMax - nwave=ndata - call rfile(18,iwave,2*nwave,ierr) + call rfile(18,iwave,ndata,ierr) close(18) if(ierr.ne.0) print*,'Error reading test file ',msg(2:) + nwave=ndata/2 + do i=nwave,NTXMAX + iwave(i)=0 + enddo endif go to 999 endif