Changes to WSJT-X User Guide for v1.5.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5442 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This commit is contained in:
Joe Taylor 2015-05-28 14:36:41 +00:00
parent cf1c607e79
commit a6dc737469
8 changed files with 35 additions and 27 deletions

View File

@ -9,7 +9,7 @@ image::images/misc-controls-center.png[align="center",alt="Misc Controls Center"
* Check *Tx even* to transmit in even-numbered UTC minutes. Uncheck * Check *Tx even* to transmit in even-numbered UTC minutes. Uncheck
this box to transmit in the odd minutes. This selection is made this box to transmit in the odd minutes. This selection is made
automatically when you double-click on a decoded text line, as automatically when you double-click on a decoded text line, as
described in the <<X5,Basic Operating Tutorial>>. described in the <<TUTORIAL,Basic Operating Tutorial>>.
* The Tx and Rx audio frequencies are usually set automatically by * The Tx and Rx audio frequencies are usually set automatically by
double-clicking on decoded text or a signal in the waterfall. They double-clicking on decoded text or a signal in the waterfall. They

View File

@ -25,9 +25,10 @@ square contains the character S if the rig is detected to be in
*Split* mode. The square becomes red if you have requested CAT *Split* mode. The square becomes red if you have requested CAT
control but communication with the radio has been lost. control but communication with the radio has been lost.
IMPORTANT: Many Icom rigs cannot be queried for split status, so you IMPORTANT: Many Icom rigs cannot be queried for split status, current
should not change the split status using rig controls when using VFO or split transmit frequency. Consequently you should not change
_WSJT-X_. the current VFO, split status or frequency using controls on the radio
when using _WSJT-X_.
* If *DX Grid* contains a valid Maidenhead locator, the corresponding * If *DX Grid* contains a valid Maidenhead locator, the corresponding
great-circle azimuth and distance from your location are displayed. great-circle azimuth and distance from your location are displayed.

View File

@ -9,13 +9,13 @@
- Uninstall: +sudo dpkg -P wsjtx+ - Uninstall: +sudo dpkg -P wsjtx+
** You may also need to execute the following commands in a terminal: ** You may also need to execute the following commands in a terminal:
* For Ubuntu 15.04 and similar systems: sudo apt-get install libqt5multimedia5-plugins libqt5serialport5
+ sudo apt-get install libfftw3-single3
=====
sudo apt-get install libqt5multimedia5-plugins libqt5serialport5
sudo apt-get install libfftw3-single3 libqt5opengl5 * For Ubuntu 15.04 and similar systems:
=====
sudo apt-get install libqt5multimedia5-plugins libqt5serialport5
sudo apt-get install libfftw3-single3 libqt5opengl5
* For Fedora, Red Hat, and other rpm-based systems: * For Fedora, Red Hat, and other rpm-based systems:
** 32-bit: {fedora32} ** 32-bit: {fedora32}
@ -25,13 +25,15 @@ sudo apt-get install libfftw3-single3 libqt5opengl5
- To install: +sudo rpm -i wsjtx-{VERSION}-x86_64.rpm+ - To install: +sudo rpm -i wsjtx-{VERSION}-x86_64.rpm+
- Uninstall: +sudo rpm -e wsjtx+ - Uninstall: +sudo rpm -e wsjtx+
** You may also need to execute the following commands in a terminal: ** You may also need to execute the following commands in a terminal:
+
=====
sudo yum install fftw-libs-single qt5-qtmultimedia qt5-qtserialport
=====
* Linux users must install a companion program called *kvasd*. sudo yum install fftw-libs-single qt5-qtmultimedia qt5-qtserialport
Instructions for a simple, quick menu-driven installation may be
found {kvasd-installer}. * All Linux users should install a companion program called +kvasd+,
the Koetter-Vardy algebraic soft-decision Reed Solomon decoder.
Execute the following commands from a terminal:
sudo add-apt-repository ppa:ki7mt/kvasd-installer
sudo apt-get update
sudo apt-get install kvasd-installer
kvasd-installer
// Add instructions about ntpd and sound setup ?

View File

@ -11,4 +11,4 @@ self-explanatory after you have made some QSOs using _WSJT-X_. You
may return to set these options to your preferences later. may return to set these options to your preferences later.
IMPORTANT: If you are using a callsign with an add-on prefix or suffix, IMPORTANT: If you are using a callsign with an add-on prefix or suffix,
be sure to read the section <<COMP_CALL,Compound Callsigns>>. be sure to read the section <<COMP-CALL,Compound Callsigns>>.

View File

@ -36,13 +36,14 @@ than though another program, make the following settings:
*Stop Bits*, and *Handshake* method. Consult your radio's user guide *Stop Bits*, and *Handshake* method. Consult your radio's user guide
for the proper parameter values. for the proper parameter values.
* _Force Control Lines_: A few station setups require the serial * _Force Control Lines_: A few station setups require the CAT serial
port's *RTS* and/or *DTR* control lines to be forced high. Check ports *RTS* and/or *DTR* control lines to be forced high or
these boxes only if you are sure they are needed. low. Check these boxes only if you are sure they are needed.
- _PTT Method_: select *VOX*, *CAT*, *DTR*, or *RTS* as the desired - _PTT Method_: select *VOX*, *CAT*, *DTR*, or *RTS* as the desired
method for T/R switching. If your choice is *DTR* or *RTS*, select method for T/R switching. If your choice is *DTR* or *RTS*, select
the desired serial port. the desired serial port (which may be the same one as used for
CAT control).
- _Transmit Audio Source_: some radios permit you to choose the - _Transmit Audio Source_: some radios permit you to choose the
connector that will accept Tx audio. If this choice is enabled, connector that will accept Tx audio. If this choice is enabled,

View File

@ -10,3 +10,7 @@ up/down arrows.
- Select *Tab 2* (below the *Decode* button) to choose the alternative - Select *Tab 2* (below the *Decode* button) to choose the alternative
set of controls for generating and selecting Tx messages. set of controls for generating and selecting Tx messages.
IMPORTANT: Sliders and spin-box controls respond to arrow key presses
and Page Up/Down key presses, with the Page keys moving the controls
in larger steps.

View File

@ -5,7 +5,7 @@
- *Start* = 200 - *Start* = 200
- *N Avg* = 5 - *N Avg* = 5
- *Zero* = 0 - *Zero* = 0
- *Gain* = 0, - *Gain* = 0
- *Palette* = Digipan - *Palette* = Digipan
- *Flatten* = checked - *Flatten* = checked
- Select *Cumulative* for data display. - Select *Cumulative* for data display.

View File

@ -130,11 +130,11 @@ include::controls-functions-wide-graph.adoc[]
include::controls-functions-main-window.adoc[] include::controls-functions-main-window.adoc[]
[[CONTROLS_LEFT]] [[CONTROLS_LEFT]]
=== Misc Controls Left === Controls Left
include::controls-functions-left.adoc[] include::controls-functions-left.adoc[]
[[CONTROLS_CENTER]] [[CONTROLS_CENTER]]
=== Misc Controls Center === Controls Center
include::controls-functions-center.adoc[] include::controls-functions-center.adoc[]
[[CONTROLS_MSGS]] [[CONTROLS_MSGS]]