Revert "Threshold in q65_sync.f90 increased to -250 only for reports. Assumes that the list is in the order defined in q65_set_list.f90 (reports are at indexes 5..56). Beware if q65_set_list is changed!!!"

This reverts commit bb08150e4b.
This commit is contained in:
Joe Taylor 2020-12-04 12:56:45 -05:00
parent 978ea0f3b5
commit aaf832cbd2
2 changed files with 4 additions and 104 deletions

View File

@ -102,11 +102,6 @@ contains
go to 100
endif
! Nico's trick to speed up data analysis
! with fullaplist decoding
! Uncomment to check only fullaplist synch and decode
! snr1 = 1 ! skip non fullaplist decoding attempts
if(snr1.lt.2.8) go to 100
jpk0=(xdt+1.0)*6000 !### Is this OK?
if(ntrperiod.le.30) jpk0=(xdt+0.5)*6000 !###

View File

@ -27,12 +27,6 @@ subroutine q65_sync(nutc,iwave,nmax,mode_q65,codewords,ncw,nsps,nfqso,ntol, &
real, allocatable :: s1(:,:) !Symbol spectra, 1/8-symbol steps
real, allocatable :: s3(:,:) !Data-symbol energies s3(LL,63)
real, allocatable :: ccf(:,:) !CCF(freq,lag)
! real, allocatable :: ccfcw(:) ! Method 2
! real, allocatable :: ccfpk(:) ! Method 2
! integer cwpk(1) ! Method 2
! integer, allocatable :: cwtone(:,:) ! Method 2
real, allocatable :: ccf1(:) !CCF(freq) at best lag
real s3prob(0:63,63) !Symbol-value probabilities
real sync(85) !sync vector
@ -58,10 +52,6 @@ subroutine q65_sync(nutc,iwave,nmax,mode_q65,codewords,ncw,nsps,nfqso,ntol, &
allocate(c0(0:nfft-1))
allocate(ccf(-ia:ia,-53:214))
allocate(ccf1(-ia:ia))
! allocate(ccfcw(1:ncw)) ! Method 2
! allocate(ccfpk(1:ncw)) ! Method 2
! allocate(cwtone(ncw,85)) ! Method 2
if(sync(1).eq.99.0) then !Generate the sync vector
sync=-22.0/63.0 !Sync tone OFF
@ -116,7 +106,6 @@ subroutine q65_sync(nutc,iwave,nmax,mode_q65,codewords,ncw,nsps,nfqso,ntol, &
!######################################################################
! Try list decoding via "Deep Likelihood".
! Joe's method
ipk=0
jpk=0
ccf_best=0.
@ -158,66 +147,6 @@ subroutine q65_sync(nutc,iwave,nmax,mode_q65,codewords,ncw,nsps,nfqso,ntol, &
endif
enddo ! imsg
! Nico's Method 2
! Computes the ccf in a different order so that
! we can see what the ccfs of the list looked like
! on ccfmax
! Compute codeword tones
! cwtone = 0
! do imsg=1,ncw
! i=1
! k=0
! do j=1,85
! if(j.eq.isync(i)) then
! i=i+1
! cwtone(imsg,j)=-1
! else
! k=k+1
! cwtone(imsg,j)=codewords(k,imsg)
! endif
! enddo
! enddo
! ipk=0
! jpk=0
! ccf_best=0.
! imsg_best=-1
! ccf=0.
! do lag=lag1,lag2
! do i=-ia,ia
! ccfcw = 0.
! do k=1,85
! j=j0 + NSTEP*(k-1) + 1 + lag
! if(j.ge.1 .and. j.le.jz) then
! do imsg=1,ncw
! ! if we would like to check only non systematic symbols
! ! uncomment the following if
! !if (k.gt.18 .or. cwtone(imsg,k).eq.-1) then
! ii=i0+mode_q65*cwtone(imsg,k)+i
! ccfcw(imsg)=ccfcw(imsg) + s1(ii,j)
! !endif
! enddo
! endif
! enddo
! ccfmax=maxval(ccfcw)
! ccf(i,lag) = ccfmax
! if(ccfmax.gt.ccf_best) then
! ccfpk = ccfcw
! cwpk = maxloc(ccfpk)
! imsg_best = cwpk(1)
! ccf_best = ccfmax
! endif
! enddo
! enddo
! ccfmax=maxval(ccf)
! ccf_best=ccfmax
! ijpk=maxloc(ccf)
! ipk=ijpk(1)-ia-1
! jpk=ijpk(2)-53-1
! f0=nfqso + ipk*df
! xdt=jpk*dtstep
ia=i0+ipk-64
ib=ia+LL-1
j=j0+jpk-7
@ -238,46 +167,22 @@ subroutine q65_sync(nutc,iwave,nmax,mode_q65,codewords,ncw,nsps,nfqso,ntol, &
if(mode_q65.eq.16) nsubmode=4
nFadingModel=1
baud=12000.0/nsps
isreport = 0;
do ibw=2,4
b90=1.72**ibw
call q65_intrinsics_ff(s3,nsubmode,b90/baud,nFadingModel,s3prob)
call q65_dec_fullaplist(s3,s3prob,codewords,ncw,esnodb,dat4,plog,irc)
! Joe's threshold
! if(irc.ge.0 .and. plog.ge.-255.0) then
! Nico's threshold
if (irc.ge.0) then
! if it is an RRR type or a CQ Mycall grid
! we accept the fullaplist threshold
! other cases in the list are reports which
! are more frequent in the list and then
! must be filtered with a higher threshold
if((irc.le.3.0 .or. irc.eq.56.0) .or. plog.ge.-250.0) then
if(irc.ge.0 .and. plog.ge.-255.0) then
snr2=esnodb - db(2500.0/baud)
id1=1
write(c77,1000) dat4(1:12),dat4(13)/2
1000 format(12b6.6,b5.5)
call unpack77(c77,0,decoded,unpk77_success) !Unpack to get msgsent
open(55,file='fort.55',status='unknown',position='append')
! Joe's dump
! write(55,3055) nutc,ibw,xdt,f0,85.0*base,ccfmax,snr2,plog, &
! irc,trim(decoded)
!3055 format(i6,i3,6f8.2,i5,2x,a)
! Nico's dump for Method 2
! This are the ccfs of the codeword in the list at the
! ccf peak
! write(55,3083) ccfpk
!3083 format(10f6.1)
! Show also the imsg_best in order to compare it with
! irc. (Interestingly they are always equal!)
! write(55,3055) nutc,ibw,xdt,f0,85.0*base,ccfmax,snr2,plog, &
! irc,(imsg_best-1),trim(decoded)
!3055 format(i6,i3,6f8.2,2i5,2x,a)
write(55,3055) nutc,ibw,xdt,f0,85.0*base,ccfmax,snr2,plog, &
irc,trim(decoded)
3055 format(i6,i3,6f8.2,i5,2x,a)
close(55)
go to 900
endif
endif
enddo