Working on a better way to get DT, f0, f1, f2, ...

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2772 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This commit is contained in:
Joe Taylor 2012-11-25 20:34:41 +00:00
parent dc303a2d65
commit c15a98004e
5 changed files with 216 additions and 103 deletions

View File

@ -5,7 +5,7 @@ program jt9sim
parameter (NMAX=1800*12000)
integer ihdr(11)
integer*2 iwave !Generated waveform (no noise)
real*8 f0,f,dt,twopi,phi,dphi,baud,fspan
real*8 f0,f,dt,twopi,phi,dphi,baud,fspan,fsample,freq
character msg*22,msg0*22,message*22,msgsent*22,arg*8,fname*11
integer*4 i4tone(85) !Channel symbols (values 0-8)
@ -106,7 +106,7 @@ program jt9sim
1020 format(i3,i4,f10.3,f7.1,2x,a22)
phi=0.
baud=12000.0/nsps
baud=12000.d0/nsps
k=12000 !Start audio at t = 1.0 s
do isym=1,85
freq=f + i4tone(isym)*baud

View File

@ -1,120 +1,181 @@
program jt9test
! Decoder for JT9.
! Decoder for JT9. Can run stand-alone, reading data from *.wav files;
! or as the back end of wsjt-x, with data placed in a shared memory region.
! NB: For unknown reason, ***MUST*** be compiled by g95 with -O0 !!!
character*80 arg,infile
parameter (NMAX=1800*12000) !Total sample intervals per 30 minutes
parameter (NDMAX=1800*1500) !Sample intervals at 1500 Hz rate
parameter (NSMAX=22000) !Max length of saved spectra
integer*4 ihdr(11)
real*4 s(NSMAX)
real*4 ccfred(NSMAX)
logical*1 lstrong(0:1023)
integer*1 i1SoftSymbols(207)
character*22 msg
character*33 line
character*80 fmt,fmt14
real*4 ccfred(NSMAX)
integer*1 i1SoftSymbols(207)
integer ii(1)
complex c0(NDMAX)
! common/jt9com/ss0(184,NSMAX),savg(NSMAX),id2(NMAX),nutc0,ndiskdat, &
! ntr,nfqso,newdat,npts80,nfb,ntol,kin,nzhsym,nsynced,ndecoded
! common/jt9comB/ss(184,NSMAX),c0
integer*2 id2
complex c0
complex c1(0:2700000)
common/jt9com/ss(184,NSMAX),savg(NSMAX),c0(NDMAX),id2(NMAX),nutc,ndiskdat, &
ntr,mousefqso,newdat,nfa,nfb,ntol,kin,nzhsym,nsynced,ndecoded
common/tracer/limtrace,lu
nargs=iargc()
if(nargs.lt.1) then
print*,'Usage: jt9 TRperiod file1 [file2 ...]'
print*,' Reads data from *.wav files.'
print*,''
print*,' jt9 -s'
print*,' Gets data from shared memory region.'
go to 999
endif
call getarg(1,arg)
if(arg(1:2).eq.'-s') then
! call jt9a
! call ftnquit
go to 999
endif
read(arg,*) ntrperiod
ifile1=2
limtrace=0
lu=12
open(12,file='timer.out',status='unknown')
open(13,file='decoded.txt',status='unknown')
open(14,file='wsjtx_rx.log',status='unknown',position='append')
call timer('decoder ',0)
nfa=1000
nfb=2000
ntol=500
nfqso=1500
newdat=1
nb=0
nbslider=100
limit=20000
ndiskdat=1
1 read(61,end=999) ipk,ia,ib,ccfred(ia:ib),nsps,npts8,c0(1:npts8)
print*,ipk,ia,ib,nsps,npts8
ntrMinutes=1
do ifile=ifile1,nargs
call getarg(ifile,infile)
open(10,file=infile,access='stream',status='old',err=998)
read(10) ihdr
i1=index(infile,'.wav')
read(infile(i1-4:i1-1),*,err=1) nutc0
go to 2
1 nutc0=0
2 nsps=0
if(ntrperiod.eq.1) then
nsps=6912
nzhsym=181
else if(ntrperiod.eq.2) then
nsps=15360
nzhsym=178
else if(ntrperiod.eq.5) then
nsps=40960
nzhsym=172
else if(ntrperiod.eq.10) then
nsps=82944
nzhsym=171
else if(ntrperiod.eq.30) then
nsps=252000
nzhsym=167
endif
if(nsps.eq.0) stop 'Error: bad TRperiod'
nsynced=0
ndecoded=0
limit=200
if(ndepth.ge.2) limit=2000
if(ndepth.ge.3) limit=20000
nsps=0
if(ntrMinutes.eq.1) then
nsps=6912
df3=1500.0/2048.0
fmt='(i4.4,i4,i5,f6.1,f8.0,f6.1,3x,a22)'
fmt14='(i4.4,i4,i5,f6.1,f8.0,f6.1,i8,3x,a22)'
else if(ntrMinutes.eq.2) then
nsps=15360
df3=1500.0/2048.0
fmt='(i4.4,i4,i5,f6.1,f8.1,f6.2,3x,a22)'
fmt14='(i4.4,i4,i5,f6.1,f8.1,f6.2,i8,3x,a22)'
else if(ntrMinutes.eq.5) then
nsps=40960
df3=1500.0/6144.0
fmt='(i4.4,i4,i5,f6.1,f8.1,f6.2,3x,a22)'
fmt14='(i4.4,i4,i5,f6.1,f8.1,f6.2,i8,3x,a22)'
else if(ntrMinutes.eq.10) then
nsps=82944
df3=1500.0/12288.0
fmt='(i4.4,i4,i5,f6.1,f8.2,f6.2,3x,a22)'
fmt14='(i4.4,i4,i5,f6.1,f8.2,f6.2,i8,3x,a22)'
else if(ntrMinutes.eq.30) then
nsps=252000
df3=1500.0/32768.0
fmt='(i4.4,i4,i5,f6.1,f8.2,f6.2,3x,a22)'
fmt14='(i4.4,i4,i5,f6.1,f8.2,f6.2,i8,3x,a22)'
endif
if(nsps.eq.0) stop 'Error: bad TRperiod' !Better: return an error code###
fgood=0.
df8=1500.0/(nsps/8)
sbest=0.
10 ii=maxloc(ccfred(ia:ib))
i=ii(1) + ia - 1
f=(i-1)*df3
if((i.eq.ipk .or. ccfred(i).ge.3.0) .and. abs(f-fgood).gt.10.0*df8) then
call timer('spec9 ',0)
call spec9(c0,npts8,nsps,f,fpk,xdt,snr,i1SoftSymbols)
call timer('spec9 ',1)
call timer('decode9 ',0)
call decode9(i1SoftSymbols,limit,nlim,msg)
call timer('decode9 ',1)
sync=ccfred(i) - 2.0
if(sync.lt.0.0) sync=0.0
nsync=sync
if(nsync.gt.10) nsync=10
nsnr=nint(snr)
drift=0.0
if(ccfred(i).gt.sbest .and. fgood.eq.0.0) then
sbest=ccfred(i)
write(line,fmt) nutc,nsync,nsnr,xdt,1000.0+fpk,drift
if(nsync.gt.0) nsynced=1
kstep=nsps/2
tstep=kstep/12000.0
k=0
nhsym0=-999
npts=(60*ntrperiod-6)*12000
if(ifile.eq.ifile1) then
open(12,file='timer.out',status='unknown')
call timer('jt9 ',0)
endif
if(msg.ne.' ') then
write(13,fmt) nutc,nsync,nsnr,xdt,1000.0+fpk,drift,msg
write(14,fmt14) nutc,nsync,nsnr,xdt,1000.0+fpk,drift,nlim,msg
fgood=f
nsynced=1
ndecoded=1
ccfred(max(ia,i):min(ib,i+8))=0.
! do i=1,npts
! id2(i)=100.0*sin(6.283185307*1600.0*i/12000.0)
! enddo
do iblk=1,npts/kstep
k=iblk*kstep
call timer('read_wav',0)
read(10,end=10) id2(k-kstep+1:k)
call timer('read_wav',1)
nhsym=(k-2048)/kstep
if(nhsym.ge.1 .and. nhsym.ne.nhsym0) then
! Emit signal readyForFFT
ingain=0
call timer('symspec ',0)
call symspec(k,ntrperiod,nsps,ingain,nb,nbslider,pxdb, &
s,ccfred,df3,ihsym,nzap,slimit,lstrong,npts8)
call timer('symspec ',1)
nhsym0=nhsym
if(ihsym.ge.184) go to 10
endif
enddo
10 close(10)
nsps8=nsps/8
c1(0:npts8-1)=conjg(c0(1:npts8))
call test9(c1,npts8,nsps8)
iz=1000.0/df3
nutc=nutc0
call timer('sync9 ',0)
call sync9(ss,nzhsym,tstep,df3,ntol,nfqso,ccfred,ia,ib,ipk) !Get sync, freq
call timer('sync9 ',1)
fgood=0.
df8=1500.0/(nsps/8)
sbest=0.
do i=ia,ib
f=(i-1)*df3
if((i.eq.ipk .or. ccfred(i).ge.3.0) .and. f.gt.fgood+10.0*df8) then
call timer('spec9 ',0)
call spec9(c0,npts8,nsps,f,fpk,xdt,snrdb,i1SoftSymbols)
call timer('spec9 ',1)
call timer('decode9 ',0)
call decode9(i1SoftSymbols,limit,nlim,msg)
call timer('decode9 ',1)
snr=snrdb
sync=ccfred(i) - 2.0
if(sync.lt.0.0) sync=0.0
nsync=sync
if(nsync.gt.10) nsync=10
nsnr=nint(snr)
width=0.0
if(ccfred(i).gt.sbest .and. fgood.eq.0.0) then
sbest=ccfred(i)
write(line,1010) nutc,nsync,nsnr,xdt,1000.0+fpk,width
if(nsync.gt.0) nsynced=1
endif
if(msg.ne.' ') then
write(*,1010) nutc,nsync,nsnr,xdt,1000.0+fpk,width,msg
1010 format(i4.4,i4,i5,f6.1,f8.2,f6.2,3x,a22)
fgood=f
nsynced=1
ndecoded=1
endif
endif
enddo
if(fgood.eq.0.0) then
write(*,1020) line
1020 format(a33)
endif
endif
ccfred(i)=0.
if(maxval(ccfred(ia:ib)).gt.3.0) go to 10
if(fgood.eq.0.0) then
write(13,1020) line
write(14,1020) line
1020 format(a33)
endif
enddo
call flush(13)
call flush(14)
go to 1
call timer('jt9 ',1)
call timer('jt9 ',101)
! call ftnquit
go to 999
999 call timer('decoder ',1)
call timer('decoder ',101)
998 print*,'Cannot open file:'
print*,infile
end program jt9test
999 end program jt9test

View File

@ -99,7 +99,6 @@ subroutine spec9(c0,npts8,nsps,fpk0,fpk,xdt,snrdb,i1SoftSymbols)
snrdb=db(t) - db(2500.0/df8) - 5.0
m0=3
ntones=8
k=0
do j=1,69
smax=0.

53
lib/test9.f90 Normal file
View File

@ -0,0 +1,53 @@
subroutine test9(c0,npts8,nsps8)
parameter (NMAX=128*864)
complex c0(0:npts8-1)
complex c1(0:NMAX-1)
complex c2(0:4096-1)
complex z
real p(0:3300)
include 'jt9sync.f90'
c1(0:npts8-1)=c0 !Copy c0 into c1
c1(npts8:)=0. !Zero the rest of c1
nfft1=NMAX !Forward FFT length
call four2a(c1,nfft1,1,-1,1) !Forward FFT
ndown=54 !Downsample factor
nfft2=nfft1/ndown !Backward FFT length
nh2=nfft2/2
fac=1.e-5
c2(0:nh2)=fac*c1(0:nh2)
c2(nh2+1:nh2+nh2-1)=fac*c1(nfft1-nh2+1:nfft1-1)
call four2a(c2,nfft2,1,1,1) !Backward FFT
nspsd=nsps8/ndown
nz=npts8/ndown
p=0.
i0=5*nspsd
do i=0,nz-1
z=sum(c2(max(i-(nspsd-1),0):i)) !Integrate
p(i0+i)=real(z)**2 + aimag(z)**2 !Symbol power at freq=0
! write(51,3001) i,p(i)
enddo
iz=85*nspsd
fac0=1.0/69.0
fac1=1.0/16.0
lagmax=13*nspsd
do lag=0,lagmax
ss=0.
do i=0,iz-1
if(isync(1+i/nspsd).eq.1) then
ss=ss + fac1*p(i+lag) !Add the sync powers
else
ss=ss - fac0*p(i+lag) !Subtract the non-sync powers
endif
enddo
write(52,3001) lag,ss
3001 format(i5,f12.3)
enddo
return
end subroutine test9

View File

@ -1,4 +1,4 @@
//---------------------------------------------------------------- MainWindow
//--------------------------------------------------------------- MainWindow
#include "mainwindow.h"
#include "ui_mainwindow.h"
#include "devsetup.h"