Fix a conflict between noise baseline percentile level and noise blanker percentage. Both were using the npct variable. Add an option for an FST4 pass when in FST4W mode.

This commit is contained in:
Steven Franke 2021-01-02 10:09:44 -06:00
parent a3638c456a
commit ebb6e5b697

View File

@ -43,6 +43,7 @@ contains
procedure(fst4_decode_callback) :: callback
character*37 decodes(100)
character*37 msg,msgsent
character*8 s_nfa_nfb
character*20 wcalls(MAXWCALLS), wpart
character*77 c77
character*12 mycall,hiscall
@ -58,7 +59,6 @@ contains
logical lagain,lapcqonly
integer itone(NN)
integer hmod
integer ipct(0:7)
integer*1 apmask(240),cw(240),hdec(240)
integer*1 message101(101),message74(74),message77(77)
integer*1 rvec(77)
@ -74,7 +74,6 @@ contains
integer*2 iwave(30*60*12000)
data ipct/0,8,14,4,12,2,10,6/
data mcq/0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0/
data mrrr/0,1,1,1,1,1,1,0,1,0,0,1,0,0,1,0,0,0,1/
data m73/0,1,1,1,1,1,1,0,1,0,0,1,0,1,0,0,0,0,1/
@ -247,6 +246,7 @@ contains
do_k50_decode=.false.
endif
! Noise blanker setup
ndropmax=1
single_decode=iand(nexp_decode,32).ne.0
npct=0
@ -262,278 +262,260 @@ contains
inb2=1 !Try NB = 0, 1, 2,... 20%
else
inb1=0 !Fixed NB value, 0 to 25%
ipct(0)=npct
endif
if(iwspr.eq.1) then !FST4W
!300 Hz wide noise-fit window
nfa=max(100,nint(nfqso+1.5*baud-150))
nfb=min(4800,nint(nfqso+1.5*baud+150))
fa=max(100,nint(nfqso+1.5*baud-ntol)) ! signal search window
fb=min(4800,nint(nfqso+1.5*baud+ntol))
else if(single_decode) then
fa=max(100,nint(nfa+1.5*baud))
fb=min(4800,nint(nfb+1.5*baud))
! extend noise fit 100 Hz outside of search window
nfa=max(100,nfa-100)
nfb=min(4800,nfb+100)
else
fa=max(100,nint(nfa+1.5*baud))
fb=min(4800,nint(nfb+1.5*baud))
! extend noise fit 100 Hz outside of search window
nfa=max(100,nfa-100)
nfb=min(4800,nfb+100)
! If environment variable FST4W_ALSO_FST4 exists then, when in FST4W mode,
! do a second pass for FST4 decodes. The value of FST4W_ALSO_FST4
! is of the form xxxxyyyy where nfa=xxxx and nfb=yyyy are the
! search limits for the FST4 decoding pass, e.g.
! FST4W_ALSO_FST4=08001700 will set FST4 search window to [800Hz,1700Hz]
!
nmode=1
call get_environment_variable("FST4W_ALSO_FST4",s_nfa_nfb,nlength)
if(iwspr.eq.1 .and. nlength.eq.8) then
read(s_nfa_nfb,"(i4.4,i4.4)") nfa_mode2,nfb_mode2
nmode=2
endif
ndecodes=0
decodes=' '
new_callsign=.false.
do inb=0,inb1,inb2
if(nb.lt.0) npct=inb
call blanker(iwave,nfft1,ndropmax,npct,c_bigfft)
do imode=1,nmode
if(imode.eq.1) iwspr=1
if(imode.eq.2) then ! this is FST4 after a FST4W pass
iwspr=0
nfa=nfa_mode2
nfb=nfb_mode2
endif
! nfa,nfb: define the noise-baseline analysis window
! fa, fb: define the signal search window
! We usually make nfa<fa and nfb>fb so that noise baseline analysis
! window extends outside of the [fa,fb] window where we think the signals are.
!
if(iwspr.eq.1) then !FST4W
nfa=max(100,nfqso-ntol-100)
nfb=min(4800,nfqso+ntol+100)
fa=max(100,nint(nfqso+1.5*baud-ntol)) ! signal search window
fb=min(4800,nint(nfqso+1.5*baud+ntol))
else if(iwspr.eq.0) then
if(imode.eq.1 .and. single_decode) then
fa=max(100,nint(nfa+1.5*baud))
fb=min(4800,nint(nfb+1.5*baud))
! extend noise fit 100 Hz outside of search window
nfa=max(100,nfa-100)
nfb=min(4800,nfb+100)
else
fa=max(100,nint(nfa+1.5*baud))
fb=min(4800,nint(nfb+1.5*baud))
! extend noise fit 100 Hz outside of search window
nfa=max(100,nfa-100)
nfb=min(4800,nfb+100)
endif
endif
ndecodes=0
decodes=' '
new_callsign=.false.
do inb=0,inb1,inb2
if(nb.lt.0) npct=inb ! we are looping over blanker settings
call blanker(iwave,nfft1,ndropmax,npct,c_bigfft)
! The big fft is done once and is used for calculating the smoothed spectrum
! and also for downconverting/downsampling each candidate.
call four2a(c_bigfft,nfft1,1,-1,0) !r2c
nhicoh=1
nsyncoh=8
minsync=1.20
if(ntrperiod.eq.15) minsync=1.15
call four2a(c_bigfft,nfft1,1,-1,0) !r2c
nhicoh=1
nsyncoh=8
minsync=1.20
if(ntrperiod.eq.15) minsync=1.15
! Get first approximation of candidate frequencies
call get_candidates_fst4(c_bigfft,nfft1,nsps,hmod,fs,fa,fb,nfa,nfb, &
minsync,ncand,candidates0)
isbest=0
fc2=0.
do icand=1,ncand
fc0=candidates0(icand,1)
if(iwspr.eq.0 .and. nb.lt.0 .and. npct.ne.0 .and. &
abs(fc0-(nfqso+1.5*baud)).gt.ntol) cycle
detmet=candidates0(icand,2)
call get_candidates_fst4(c_bigfft,nfft1,nsps,hmod,fs,fa,fb,nfa,nfb, &
minsync,ncand,candidates0)
isbest=0
fc2=0.
do icand=1,ncand
fc0=candidates0(icand,1)
if(iwspr.eq.0 .and. nb.lt.0 .and. npct.ne.0 .and. &
abs(fc0-(nfqso+1.5*baud)).gt.ntol) cycle ! blanker loop only near nfqso
detmet=candidates0(icand,2)
! Downconvert and downsample a slice of the spectrum centered on the
! rough estimate of the candidates frequency.
! Output array c2 is complex baseband sampled at 12000/ndown Sa/sec.
! The size of the downsampled c2 array is nfft2=nfft1/ndown
call timer('dwnsmpl ',0)
call fst4_downsample(c_bigfft,nfft1,ndown,fc0,sigbw,c2)
call timer('dwnsmpl ',1)
call timer('dwnsmpl ',0)
call fst4_downsample(c_bigfft,nfft1,ndown,fc0,sigbw,c2)
call timer('dwnsmpl ',1)
call timer('sync240 ',0)
call fst4_sync_search(c2,nfft2,hmod,fs2,nss,ntrperiod,nsyncoh,emedelay,sbest,fcbest,isbest)
call timer('sync240 ',1)
call timer('sync240 ',0)
call fst4_sync_search(c2,nfft2,hmod,fs2,nss,ntrperiod,nsyncoh,emedelay,sbest,fcbest,isbest)
call timer('sync240 ',1)
fc_synced = fc0 + fcbest
dt_synced = (isbest-fs2)*dt2 !nominal dt is 1 second so frame starts at sample fs2
candidates0(icand,3)=fc_synced
candidates0(icand,4)=isbest
enddo
fc_synced = fc0 + fcbest
dt_synced = (isbest-fs2)*dt2 !nominal dt is 1 second so frame starts at sample fs2
candidates0(icand,3)=fc_synced
candidates0(icand,4)=isbest
enddo
! remove duplicate candidates
do icand=1,ncand
fc=candidates0(icand,3)
isbest=nint(candidates0(icand,4))
do ic2=icand+1,ncand
fc2=candidates0(ic2,3)
isbest2=nint(candidates0(ic2,4))
if(fc2.gt.0.0) then
if(abs(fc2-fc).lt.0.10*baud) then ! same frequency
if(abs(isbest2-isbest).le.2) then
candidates0(ic2,3)=-1
endif
endif
endif
enddo
enddo
ic=0
do icand=1,ncand
if(candidates0(icand,3).gt.0) then
ic=ic+1
candidates0(ic,:)=candidates0(icand,:)
endif
enddo
ncand=ic
! If FST4 and Single Decode is not checked, then find candidates within
! 20 Hz of nfqso and put them at the top of the list
if(iwspr.eq.0 .and. .not.single_decode) then
nclose=count(abs(candidates0(:,3)-(nfqso+1.5*baud)).le.20)
k=0
do i=1,ncand
if(abs(candidates0(i,3)-(nfqso+1.5*baud)).le.20) then
k=k+1
candidates(k,:)=candidates0(i,:)
endif
enddo
do i=1,ncand
if(abs(candidates0(i,3)-(nfqso+1.5*baud)).gt.20) then
k=k+1
candidates(k,:)=candidates0(i,:)
endif
enddo
else
candidates=candidates0
endif
xsnr=0.
do icand=1,ncand
sync=candidates(icand,2)
fc_synced=candidates(icand,3)
isbest=nint(candidates(icand,4))
xdt=(isbest-nspsec)/fs2
if(ntrperiod.eq.15) xdt=(isbest-real(nspsec)/2.0)/fs2
call timer('dwnsmpl ',0)
call fst4_downsample(c_bigfft,nfft1,ndown,fc_synced,sigbw,c2)
call timer('dwnsmpl ',1)
do ijitter=0,jittermax
if(ijitter.eq.0) ioffset=0
if(ijitter.eq.1) ioffset=1
if(ijitter.eq.2) ioffset=-1
is0=isbest+ioffset
iend=is0+160*nss-1
if( is0.lt.0 .or. iend.gt.(nfft2-1) ) cycle
cframe=c2(is0:iend)
bitmetrics=0
call timer('bitmetrc',0)
call get_fst4_bitmetrics(cframe,nss,nblock,nhicoh,bitmetrics, &
s4,nsync_qual,badsync)
call timer('bitmetrc',1)
if(badsync) cycle
do il=1,4
llrs( 1: 60,il)=bitmetrics( 17: 76, il)
llrs( 61:120,il)=bitmetrics( 93:152, il)
llrs(121:180,il)=bitmetrics(169:228, il)
llrs(181:240,il)=bitmetrics(245:304, il)
enddo
apmag=maxval(abs(llrs(:,4)))*1.1
ntmax=nblock+nappasses(nQSOProgress)
if(lapcqonly) ntmax=nblock+1
if(ndepth.eq.1) ntmax=nblock ! no ap for ndepth=1
apmask=0
if(iwspr.eq.1) then ! 50-bit msgs, no ap decoding
nblock=4
ntmax=nblock
endif
do itry=1,ntmax
if(itry.eq.1) llr=llrs(:,1)
if(itry.eq.2.and.itry.le.nblock) llr=llrs(:,2)
if(itry.eq.3.and.itry.le.nblock) llr=llrs(:,3)
if(itry.eq.4.and.itry.le.nblock) llr=llrs(:,4)
if(itry.le.nblock) then
apmask=0
iaptype=0
endif
if(itry.gt.nblock .and. iwspr.eq.0) then ! do ap passes
llr=llrs(:,nblock) ! Use largest blocksize as the basis for AP passes
iaptype=naptypes(nQSOProgress,itry-nblock)
if(lapcqonly) iaptype=1
if(iaptype.ge.2 .and. apbits(1).gt.1) cycle ! No, or nonstandard, mycall
if(iaptype.ge.3 .and. apbits(30).gt.1) cycle ! No, or nonstandard, dxcall
if(iaptype.eq.1) then ! CQ
apmask=0
apmask(1:29)=1
llr(1:29)=apmag*mcq(1:29)
endif
if(iaptype.eq.2) then ! MyCall ??? ???
apmask=0
apmask(1:29)=1
llr(1:29)=apmag*apbits(1:29)
endif
if(iaptype.eq.3) then ! MyCall DxCall ???
apmask=0
apmask(1:58)=1
llr(1:58)=apmag*apbits(1:58)
endif
if(iaptype.eq.4 .or. iaptype.eq.5 .or. iaptype .eq.6) then
apmask=0
apmask(1:77)=1
llr(1:58)=apmag*apbits(1:58)
if(iaptype.eq.4) llr(59:77)=apmag*mrrr(1:19)
if(iaptype.eq.5) llr(59:77)=apmag*m73(1:19)
if(iaptype.eq.6) llr(59:77)=apmag*mrr73(1:19)
endif
endif
dmin=0.0
nharderrors=-1
unpk77_success=.false.
if(iwspr.eq.0) then
maxosd=2
Keff=91
norder=3
call timer('d240_101',0)
call decode240_101(llr,Keff,maxosd,norder,apmask,message101, &
cw,ntype,nharderrors,dmin)
call timer('d240_101',1)
if(count(cw.eq.1).eq.0) then
nharderrors=-nharderrors
cycle
endif
write(c77,'(77i1)') mod(message101(1:77)+rvec,2)
call unpack77(c77,1,msg,unpk77_success)
elseif(iwspr.eq.1) then
! Try decoding with Keff=66
maxosd=2
call timer('d240_74 ',0)
Keff=66
norder=3
call decode240_74(llr,Keff,maxosd,norder,apmask,message74,cw, &
ntype,nharderrors,dmin)
call timer('d240_74 ',1)
if(nharderrors.lt.0) goto 3465
if(count(cw.eq.1).eq.0) then
nharderrors=-nharderrors
cycle
endif
write(c77,'(50i1)') message74(1:50)
c77(51:77)='000000000000000000000110000'
call unpack77(c77,1,msg,unpk77_success)
if(unpk77_success .and. do_k50_decode) then
! If decode was obtained with Keff=66, save call/grid in fst4w_calls.txt if not there already.
i1=index(msg,' ')
i2=i1+index(msg(i1+1:),' ')
wpart=trim(msg(1:i2))
! Only save callsigns/grids from type 1 messages
if(index(wpart,'/').eq.0 .and. index(wpart,'<').eq.0) then
ifound=0
do i=1,nwcalls
if(index(wcalls(i),wpart).ne.0) ifound=1
enddo
if(ifound.eq.0) then ! This is a new callsign
new_callsign=.true.
if(nwcalls.lt.MAXWCALLS) then
nwcalls=nwcalls+1
wcalls(nwcalls)=wpart
else
wcalls(1:nwcalls-1)=wcalls(2:nwcalls)
wcalls(nwcalls)=wpart
endif
endif
do icand=1,ncand
fc=candidates0(icand,3)
isbest=nint(candidates0(icand,4))
do ic2=icand+1,ncand
fc2=candidates0(ic2,3)
isbest2=nint(candidates0(ic2,4))
if(fc2.gt.0.0) then
if(abs(fc2-fc).lt.0.10*baud) then ! same frequency
if(abs(isbest2-isbest).le.2) then
candidates0(ic2,3)=-1
endif
endif
3465 continue
endif
enddo
enddo
ic=0
do icand=1,ncand
if(candidates0(icand,3).gt.0) then
ic=ic+1
candidates0(ic,:)=candidates0(icand,:)
endif
enddo
ncand=ic
! If no decode then try Keff=50
iaptype=0
if( .not. unpk77_success .and. do_k50_decode ) then
maxosd=1
! If FST4 mode and Single Decode is not checked, then find candidates
! within 20 Hz of nfqso and put them at the top of the list
if(iwspr.eq.0 .and. .not.single_decode) then
nclose=count(abs(candidates0(:,3)-(nfqso+1.5*baud)).le.20)
k=0
do i=1,ncand
if(abs(candidates0(i,3)-(nfqso+1.5*baud)).le.20) then
k=k+1
candidates(k,:)=candidates0(i,:)
endif
enddo
do i=1,ncand
if(abs(candidates0(i,3)-(nfqso+1.5*baud)).gt.20) then
k=k+1
candidates(k,:)=candidates0(i,:)
endif
enddo
else
candidates=candidates0
endif
xsnr=0.
do icand=1,ncand
sync=candidates(icand,2)
fc_synced=candidates(icand,3)
isbest=nint(candidates(icand,4))
xdt=(isbest-nspsec)/fs2
if(ntrperiod.eq.15) xdt=(isbest-real(nspsec)/2.0)/fs2
call timer('dwnsmpl ',0)
call fst4_downsample(c_bigfft,nfft1,ndown,fc_synced,sigbw,c2)
call timer('dwnsmpl ',1)
do ijitter=0,jittermax
if(ijitter.eq.0) ioffset=0
if(ijitter.eq.1) ioffset=1
if(ijitter.eq.2) ioffset=-1
is0=isbest+ioffset
iend=is0+160*nss-1
if( is0.lt.0 .or. iend.gt.(nfft2-1) ) cycle
cframe=c2(is0:iend)
bitmetrics=0
call timer('bitmetrc',0)
call get_fst4_bitmetrics(cframe,nss,nblock,nhicoh,bitmetrics, &
s4,nsync_qual,badsync)
call timer('bitmetrc',1)
if(badsync) cycle
do il=1,4
llrs( 1: 60,il)=bitmetrics( 17: 76, il)
llrs( 61:120,il)=bitmetrics( 93:152, il)
llrs(121:180,il)=bitmetrics(169:228, il)
llrs(181:240,il)=bitmetrics(245:304, il)
enddo
apmag=maxval(abs(llrs(:,4)))*1.1
ntmax=nblock+nappasses(nQSOProgress)
if(lapcqonly) ntmax=nblock+1
if(ndepth.eq.1) ntmax=nblock ! no ap for ndepth=1
apmask=0
if(iwspr.eq.1) then ! 50-bit msgs, no ap decoding
nblock=4
ntmax=nblock
endif
do itry=1,ntmax
if(itry.eq.1) llr=llrs(:,1)
if(itry.eq.2.and.itry.le.nblock) llr=llrs(:,2)
if(itry.eq.3.and.itry.le.nblock) llr=llrs(:,3)
if(itry.eq.4.and.itry.le.nblock) llr=llrs(:,4)
if(itry.le.nblock) then
apmask=0
iaptype=0
endif
if(itry.gt.nblock .and. iwspr.eq.0) then ! do ap passes
llr=llrs(:,nblock) ! Use largest blocksize as the basis for AP passes
iaptype=naptypes(nQSOProgress,itry-nblock)
if(lapcqonly) iaptype=1
if(iaptype.ge.2 .and. apbits(1).gt.1) cycle ! No, or nonstandard, mycall
if(iaptype.ge.3 .and. apbits(30).gt.1) cycle ! No, or nonstandard, dxcall
if(iaptype.eq.1) then ! CQ
apmask=0
apmask(1:29)=1
llr(1:29)=apmag*mcq(1:29)
endif
if(iaptype.eq.2) then ! MyCall ??? ???
apmask=0
apmask(1:29)=1
llr(1:29)=apmag*apbits(1:29)
endif
if(iaptype.eq.3) then ! MyCall DxCall ???
apmask=0
apmask(1:58)=1
llr(1:58)=apmag*apbits(1:58)
endif
if(iaptype.eq.4 .or. iaptype.eq.5 .or. iaptype .eq.6) then
apmask=0
apmask(1:77)=1
llr(1:58)=apmag*apbits(1:58)
if(iaptype.eq.4) llr(59:77)=apmag*mrrr(1:19)
if(iaptype.eq.5) llr(59:77)=apmag*m73(1:19)
if(iaptype.eq.6) llr(59:77)=apmag*mrr73(1:19)
endif
endif
dmin=0.0
nharderrors=-1
unpk77_success=.false.
if(iwspr.eq.0) then
maxosd=2
Keff=91
norder=3
call timer('d240_101',0)
call decode240_101(llr,Keff,maxosd,norder,apmask,message101, &
cw,ntype,nharderrors,dmin)
call timer('d240_101',1)
if(count(cw.eq.1).eq.0) then
nharderrors=-nharderrors
cycle
endif
write(c77,'(77i1)') mod(message101(1:77)+rvec,2)
call unpack77(c77,1,msg,unpk77_success)
elseif(iwspr.eq.1) then
! Try decoding with Keff=66
maxosd=2
call timer('d240_74 ',0)
Keff=50
norder=4
Keff=66
norder=3
call decode240_74(llr,Keff,maxosd,norder,apmask,message74,cw, &
ntype,nharderrors,dmin)
call timer('d240_74 ',1)
if(nharderrors.lt.0) goto 3465
if(count(cw.eq.1).eq.0) then
nharderrors=-nharderrors
cycle
@ -541,89 +523,134 @@ contains
write(c77,'(50i1)') message74(1:50)
c77(51:77)='000000000000000000000110000'
call unpack77(c77,1,msg,unpk77_success)
! No CRC in this mode, so only accept the decode if call/grid have been seen before
if(unpk77_success) then
unpk77_success=.false.
do i=1,nwcalls
if(index(msg,trim(wcalls(i))).gt.0) then
unpk77_success=.true.
if(unpk77_success .and. do_k50_decode) then
! If decode was obtained with Keff=66, save call/grid in fst4w_calls.txt if not there already.
i1=index(msg,' ')
i2=i1+index(msg(i1+1:),' ')
wpart=trim(msg(1:i2))
! Only save callsigns/grids from type 1 messages
if(index(wpart,'/').eq.0 .and. index(wpart,'<').eq.0) then
ifound=0
do i=1,nwcalls
if(index(wcalls(i),wpart).ne.0) ifound=1
enddo
if(ifound.eq.0) then ! This is a new callsign
new_callsign=.true.
if(nwcalls.lt.MAXWCALLS) then
nwcalls=nwcalls+1
wcalls(nwcalls)=wpart
else
wcalls(1:nwcalls-1)=wcalls(2:nwcalls)
wcalls(nwcalls)=wpart
endif
endif
enddo
endif
endif
3465 continue
! If no decode then try Keff=50
iaptype=0
if( .not. unpk77_success .and. do_k50_decode ) then
maxosd=1
call timer('d240_74 ',0)
Keff=50
norder=4
call decode240_74(llr,Keff,maxosd,norder,apmask,message74,cw, &
ntype,nharderrors,dmin)
call timer('d240_74 ',1)
if(count(cw.eq.1).eq.0) then
nharderrors=-nharderrors
cycle
endif
write(c77,'(50i1)') message74(1:50)
c77(51:77)='000000000000000000000110000'
call unpack77(c77,1,msg,unpk77_success)
! No CRC in this mode, so only accept the decode if call/grid have been seen before
if(unpk77_success) then
unpk77_success=.false.
do i=1,nwcalls
if(index(msg,trim(wcalls(i))).gt.0) then
unpk77_success=.true.
endif
enddo
endif
endif
endif
endif
if(nharderrors .ge.0 .and. unpk77_success) then
idupe=0
do i=1,ndecodes
if(decodes(i).eq.msg) idupe=1
enddo
if(idupe.eq.1) goto 800
ndecodes=ndecodes+1
decodes(ndecodes)=msg
if(nharderrors .ge.0 .and. unpk77_success) then
idupe=0
do i=1,ndecodes
if(decodes(i).eq.msg) idupe=1
enddo
if(idupe.eq.1) goto 800
ndecodes=ndecodes+1
decodes(ndecodes)=msg
if(iwspr.eq.0) then
call get_fst4_tones_from_bits(message101,itone,0)
else
call get_fst4_tones_from_bits(message74,itone,1)
endif
inquire(file='plotspec',exist=plotspec_exists)
fmid=-999.0
call timer('dopsprd ',0)
if(plotspec_exists) then
call dopspread(itone,iwave,nsps,nmax,ndown,hmod, &
isbest,fc_synced,fmid,w50)
endif
call timer('dopsprd ',1)
xsig=0
do i=1,NN
xsig=xsig+s4(itone(i),i)
enddo
base=candidates(icand,5)
arg=600.0*(xsig/base)-1.0
if(arg.gt.0.0) then
xsnr=10*log10(arg)-35.5-12.5*log10(nsps/8200.0)
if(ntrperiod.eq. 15) xsnr=xsnr+2
if(ntrperiod.eq. 30) xsnr=xsnr+1
if(ntrperiod.eq. 900) xsnr=xsnr+1
if(ntrperiod.eq.1800) xsnr=xsnr+2
else
xsnr=-99.9
endif
nsnr=nint(xsnr)
qual=0.0
fsig=fc_synced - 1.5*baud
inquire(file=trim(data_dir)//'/decdata',exist=decdata_exists)
if(decdata_exists) then
hdec=0
where(llrs(:,1).ge.0.0) hdec=1
nhp=count(hdec.ne.cw) ! # hard errors wrt N=1 soft symbols
hd=sum(ieor(hdec,cw)*abs(llrs(:,1))) ! weighted distance wrt N=1 symbols
open(21,file=trim(data_dir)//'/fst4_decodes.dat',status='unknown',position='append')
write(21,3021) nutc,icand,itry,nsyncoh,iaptype, &
ijitter,npct,ntype,Keff,nsync_qual,nharderrors,dmin,nhp,hd, &
sync,xsnr,xdt,fsig,w50,trim(msg)
3021 format(i6.6,i4,6i3,3i4,f6.1,i4,f6.1,f9.2,f6.1,f6.2,f7.1,f7.3,1x,a)
close(21)
endif
call this%callback(nutc,smax1,nsnr,xdt,fsig,msg, &
iaptype,qual,ntrperiod,lwspr,fmid,w50)
if(iwspr.eq.0 .and. nb.lt.0 .and. imode.eq.1) go to 900
goto 800
endif
enddo ! metrics
enddo ! istart jitter
800 enddo !candidate list
enddo ! noise blanker loop
if(iwspr.eq.0) then
call get_fst4_tones_from_bits(message101,itone,0)
else
call get_fst4_tones_from_bits(message74,itone,1)
endif
inquire(file='plotspec',exist=plotspec_exists)
fmid=-999.0
call timer('dopsprd ',0)
if(plotspec_exists) then
call dopspread(itone,iwave,nsps,nmax,ndown,hmod, &
isbest,fc_synced,fmid,w50)
endif
call timer('dopsprd ',1)
xsig=0
do i=1,NN
xsig=xsig+s4(itone(i),i)
enddo
base=candidates(icand,5)
arg=600.0*(xsig/base)-1.0
if(arg.gt.0.0) then
xsnr=10*log10(arg)-35.5-12.5*log10(nsps/8200.0)
if(ntrperiod.eq. 15) xsnr=xsnr+2
if(ntrperiod.eq. 30) xsnr=xsnr+1
if(ntrperiod.eq. 900) xsnr=xsnr+1
if(ntrperiod.eq.1800) xsnr=xsnr+2
else
xsnr=-99.9
endif
nsnr=nint(xsnr)
qual=0.0
fsig=fc_synced - 1.5*baud
inquire(file=trim(data_dir)//'/decdata',exist=decdata_exists)
if(decdata_exists) then
hdec=0
where(llrs(:,1).ge.0.0) hdec=1
nhp=count(hdec.ne.cw) ! # hard errors wrt N=1 soft symbols
hd=sum(ieor(hdec,cw)*abs(llrs(:,1))) ! weighted distance wrt N=1 symbols
open(21,file=trim(data_dir)//'/fst4_decodes.dat',status='unknown',position='append')
write(21,3021) nutc,icand,itry,nsyncoh,iaptype, &
ijitter,ntype,Keff,nsync_qual,nharderrors,dmin,nhp,hd, &
sync,xsnr,xdt,fsig,w50,trim(msg)
3021 format(i6.6,i4,5i3,3i4,f6.1,i4,f6.1,f9.2,f6.1,f6.2,f7.1,f7.3,1x,a)
close(21)
endif
call this%callback(nutc,smax1,nsnr,xdt,fsig,msg, &
iaptype,qual,ntrperiod,lwspr,fmid,w50)
if(iwspr.eq.0 .and. nb.lt.0) go to 900
goto 800
endif
enddo ! metrics
enddo ! istart jitter
800 enddo !candidate list
enddo ! noise blanker loop
if(new_callsign .and. do_k50_decode) then ! re-write the fst4w_calls.txt file
open(42,file=trim(data_dir)//'/fst4w_calls.txt',status='unknown')
do i=1,nwcalls
write(42,'(a20)') trim(wcalls(i))
enddo
close(42)
endif
if(new_callsign .and. do_k50_decode) then ! re-write the fst4w_calls.txt file
open(42,file=trim(data_dir)//'/fst4w_calls.txt',status='unknown')
do i=1,nwcalls
write(42,'(a20)') trim(wcalls(i))
enddo
close(42)
endif
enddo ! mode loop
900 return
end subroutine decode
@ -818,8 +845,8 @@ contains
do i=ina,inb !Compute CCF of s() and 4 tones
s2(i)=s(i-hmod*3) + s(i-hmod) +s(i+hmod) +s(i+hmod*3)
enddo
npct=30
call fst4_baseline(s2,nnw,ina+hmod*3,inb-hmod*3,npct,sbase)
npctile=30
call fst4_baseline(s2,nnw,ina+hmod*3,inb-hmod*3,npctile,sbase)
if(any(sbase(ina:inb).le.0.0)) return
s2(ina:inb)=s2(ina:inb)/sbase(ina:inb) !Normalize wrt noise level