correct a flaw in "Decode remaining files in directory"; correct the widget visibility in ISCAT mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7201 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

doc/user_guide/en/introduction.adoc

@@ -7,27 +7,27 @@ K1**JT**,`" while the suffix "`-X`" indicates that _WSJT-X_ started as
 an extended and experimental branch of the program
 _WSJT_.
 
-_WSJT-X_ Version 1.7 offers eight protocols or modes: *JT4*,
+_WSJT-X_ Version 1.7 offers eight protocols or modes: *JT4*, *JT9*,
-*JT9*, *JT65*, *QRA64*, *WSPR*, *ISCAT*, *MSK144*, and *Echo*.  The
+*JT65*, *QRA64*, *ISCAT*, *MSK144*, *WSPR*, and *Echo*.  The first
-first four are designed for making reliable QSOs under extreme
+four are designed for making reliable QSOs under extreme weak-signal
-weak-signal conditions. They use nearly identical message structure
+conditions. They use nearly identical message structure and source
-and source encoding.  JT65 and QRA64 were designed for EME
+encoding.  JT65 and QRA64 were designed for EME ("`moonbounce`") on
-("`moonbounce`") on the VHF/UHF bands and have also proven very
+the VHF/UHF bands and have also proven very effective for worldwide
-effective for worldwide QRP communication on the HF bands.  QRA64 has
+QRP communication on the HF bands.  QRA64 has a number of advantages
-a number of advantages over JT65, including better performance on the
+over JT65, including better performance on the very weakest signals.
-very weakest signals.  We imagine that over time it may replace JT65
+We imagine that over time it may replace JT65 for EME use.  JT9 was
-for EME use.  JT9 was originally designed for the LF, MF, and lower HF
+originally designed for the LF, MF, and lower HF bands.  Its submode
-bands.  Its submode JT9A is 2 dB more sensitive than JT65 while using
+JT9A is 2 dB more sensitive than JT65 while using less than 10% of the
-less than 10% of the bandwidth.  JT4 offers a wide variety of tone
+bandwidth.  JT4 offers a wide variety of tone spacings and has proven
-spacings and has proved very effective for EME on microwave bands up
+highly effective for EME on microwave bands up to 24 GHz.  All of these
-to 24 GHz.  All of these "`slow`" modes use one-minute timed sequences
+"`slow`" modes use one-minute timed sequences of alternating
-of alternating transmission and reception, so a minimal QSO takes four
+transmission and reception, so a minimal QSO takes four to six minutes
-to six minutes — two or three transmissions by each station, one
+— two or three transmissions by each station, one sending in odd UTC
-sending in odd UTC minutes and the other even. On the HF bands,
+minutes and the other even. On the HF bands, world-wide QSOs are
-world-wide QSOs are possible using power levels of a few watts (or
+possible using power levels of a few watts (or even milliwatts) and
-even milliwatts) and compromise antennas.  On VHF bands and higher,
+compromise antennas.  On VHF bands and higher, QSOs are possible (by
-QSOs are possible (by EME and other propagation types) at signal
+EME and other propagation types) at signal levels 10 to 15 dB below
-levels 10 to 15 dB below those required for CW.
+those required for CW.
 
 *ISCAT*, *MSK144*, and optionally submodes *JT9E-H* are "`fast`"
 protocols designed to take advantage of brief signal enhancements from

doc/user_guide/en/new_features.adoc

@@ -5,22 +5,23 @@ added to _WSJT-X_ since Version 1.6.0:
 
 - New modes: ISCAT, MSK144, QRA64
 
-- Newly implemented submodes of existing modes: JT65B-C, JT9B-H
+- Newly implemented submodes: JT65B-C, JT9B-H
 
-- Fast submodes of JT9
+- New fast submodes of JT9E-H
 
-- New Franke-Taylor decoder replaces the Koetter-Vardy decoder in
+- New Franke-Taylor decoder toreplace the Koetter-Vardy decoder in
-JT65; the separate program `kvasd[.exe]` is no longer used.
+JT65. Separate program `kvasd[.exe]` is no longer used.
 
 - Improvements to the JT4, JT9, and JT65 decoders
 
-- Multi-pass decoding for JT65 and WSPR
+- Multi-pass decoding for JT65 and WSPR.  Strong decoded signals are
+subtracted out, allowing the decoding of weaker signals.
 
 - Improved convenience features for EME Doppler tracking
 
-- Multiple program configurations can be saved and restored
+- Saving and restoring of multiple program configurations
 
-- A new sample-file download facility
+- New sample-file download facility
 
 - Many corrections and improvements to the Hamlib library, fixing
-balky rig-control features.
+balky rig-control features

doc/user_guide/en/protocols.adoc

@@ -245,3 +245,30 @@ holdover from JTMSK and is probably not necessary.) The 144-bit frame
 is repeated for the duration of a transmission cycle.
 
 
+=== Summary
+
+[[SLOW_TAB]]
+.Parameters of Slow Modes
+[width="90%",cols="3h,^3,^2,^1,^2,^2,^2,^2,^2,^2",frame=topbot,options="header"]
+|===============================================================================
+|Mode  |FEC Type   |(k,n)   | Q|  Mod | Baud |BW (Hz)|fSync|TxT (s)|S/N (dB)
+|JT4A  |K=32, r=1/2|(206,72)| 2| 4-FSK| 4.375|  17.5 | 0.50| 47.1   | -23
+|JT9A  |K=13, r=1/2|(206,72)| 8| 9-FSK| 1.736|  15.6 | 0.19| 49.0   | -27
+|JT65A |RS         |(63,12) |64|65-FSK| 2.692| 177.6 | 0.50| 46.8   | -25
+|QRA64A|QRA        |(63,12) |64|64-FSK| 1.736| 111.1 | 0.25| 48.4   | -28
+| WSPR |K=32, r=1/2|(162,50)| 2| 4-FSK| 1.465|   5.9 | 0.50|110.6   | -29
+|===============================================================================
+
+.Parameters of Fast Modes
+[width="90%",cols="3h,^3,^2,^1,^2,^2,^2,^2,^2,^2",frame="topbot",options="header"]
+|=============================================================================
+|Mode     |FEC Type   |(k,n)   | Q|  Mod | Baud |BW (Hz)|fSync|TxT (s)|S/N (dB)
+|ISCAT-A  |   -       |  -     |42|42-FSK| 21.5 |  905  | 0.17| 1.176  | 
+|ISCAT-B  |   -       |  -     |42|42-FSK| 43.1 | 1809  | 0.17| 0.588  | 
+|JT9E     |K=32, r=1/2|(206,72)| 8| 9-FSK| 25.0 |  225  | 0.19| 3.400  |  
+|JT9F     |K=32, r=1/2|(206,72)| 8| 9-FSK| 50.0 |  450  | 0.19| 1.700  |  
+|JT9G     |K=32, r=1/2|(206,72)| 8| 9-FSK|100.0 |  900  | 0.19| 0.850  |  
+|JT9H     |K=32, r=1/2|(206,72)| 8| 9-FSK|200.0 | 1800  | 0.19| 0.425  |  
+|MSK144   |LDPC       |(128,72)| 2| OQPSK| 2000 | 2000  | 0.11| 0.072  | -5
+|MSK144 Sh|LDPC       |(32,16) | 2| OQPSK| 2000 | 2000  | 0.20| 0.020  | -5
+|=============================================================================

mainwindow.cpp

@@ -809,6 +809,7 @@ MainWindow::MainWindow(QDir const& temp_directory, bool multiple,
   m_fCPUmskrtd=0.0;
   m_bFastDone=false;
   m_bAltV=false;
+  m_wait=0;
   ui->txrb1->setChecked(true);
 
   if(m_mode.startsWith ("WSPR") and m_pctx>0)  {
@@ -2005,7 +2006,7 @@ void MainWindow::on_actionOpen_next_in_directory_triggered()   //Open Next
       tx_status_label.setText(" " + baseName + " ");
       m_diskData=true;
       read_wav_file (fname);
-      if(i==list.size()-2) {
+      if(m_loopall and (i==list.size()-2)) {
         m_loopall=false;
         MessageBox::information_message(this, tr("No more files to open."));
       }
@@ -2950,8 +2951,14 @@ void MainWindow::guiUpdate()
   if(!m_btxok && m_btxok0 && g_iptt==1) stopTx();
 
   if(m_startAnother) {
-    m_startAnother=false;
+    if(m_mode=="MSK144") {
-    on_actionOpen_next_in_directory_triggered();
+      m_wait++;
+    }
+    if(m_mode!="MSK144" or m_wait>=4) {
+      m_wait=0;
+      m_startAnother=false;
+      on_actionOpen_next_in_directory_triggered();
+    }
   }
 
 //Once per second:
@@ -4020,7 +4027,7 @@ void MainWindow::on_actionMSK144_triggered()
   ui->sbFtol->setVisible(true);
   ui->cbAutoSeq->setVisible(true);
   ui->ClrAvgButton->setVisible(false);
-
+  ui->RxFreqSpinBox->setVisible(true);
   ui->cbShMsgs->setVisible(true);
   ui->actionMSK144->setChecked(true);
   ui->rptSpinBox->setMinimum(-8);
@@ -4290,6 +4297,7 @@ void MainWindow::on_actionISCAT_triggered()
   ui->sbFtol->setVisible(true);
   ui->sbSubmode->setVisible(true);
   ui->cbShMsgs->setVisible(false);
+  ui->cbShMsgs->setChecked(false);
   ui->cbTx6->setVisible(false);
   ui->cbAutoSeq->setVisible(false);
   ui->decodedTextBrowser2->setVisible(false);
@@ -4301,7 +4309,11 @@ void MainWindow::on_actionISCAT_triggered()
   ui->sbSubmode->setMaximum(1);
   if(m_nSubMode==0) ui->TxFreqSpinBox->setValue(1012);
   if(m_nSubMode==1) ui->TxFreqSpinBox->setValue(560);
-  ui->TxFreqSpinBox->setEnabled (false);
+  ui->TxFreqSpinBox->setVisible(false);
+  ui->RxFreqSpinBox->setVisible(false);
+  ui->pbR2T->setVisible(false);
+  ui->pbT2R->setVisible(false);
+  ui->cbTxLock->setVisible(false);
 }
 
 void MainWindow::switch_mode (Mode mode)

mainwindow.h

@@ -373,6 +373,7 @@ private:
   qint32  m_nTx73;
   qint32  m_freqCQ;
   qint32  m_UTCdisk;
+  qint32  m_wait;
 
   bool    m_btxok;		//True if OK to transmit
   bool    m_diskData;