More additions to User Guide for v1.6.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5480 ab8295b8-cf94-4d9e-aec4-7959e3be5d79

doc/CMakeLists.txt

@@ -33,6 +33,7 @@ set (UG_SRCS
   user_guide/jt65-protocol.adoc
   user_guide/rig-config-softrock.adoc
   user_guide/tutorial-example2.adoc
+  user_guide/tutorial-vhf.adoc
   user_guide/controls-functions-messages.adoc
   user_guide/jt9-protocol.adoc
   user_guide/rig-config-template.adoc

doc/user_guide/transceiver-setup.adoc

@@ -19,22 +19,22 @@ slider not too far from its mid-point.
 - If your transceiver offers more than one bandwidth setting in USB
 mode, you should normally choose the widest one possible, up to about
 5 kHz.  This choice has the desirable effect of allowing the *Wide
-Graph* (waterfall and 2D spectrum) to display the JT65 and JT9
-sub-bands simultaneously on most HF bands.  Further details are
-provided in the <<TUTORIAL,Tutorial>> section.
+Graph* (waterfall and 2D spectrum) to display the conventional JT65
+and JT9 sub-bands simultaneously on most HF bands.  Further details
+are provided in the <<TUTORIAL,Tutorial>> section.  A wider displayed
+bandwidth may also be helpful at VHF and above, where usage of JT65
+and JT4 is found over a much wider range of frequencies.
 
 - If you have only a standard SSB filter you won’t be able to display
 more than about 2.7 kHz bandwidth.  Depending on the exact dial
-frequency setting, you can display the full sub-band generally used
-for one mode (JT65 or JT9) and part of the sub-band for the other
-mode.
+frequency setting, on HF bands you can display the full sub-band
+generally used for one mode (JT65 or JT9) and part of the sub-band for
+the other mode.
 
 - Of course, you might prefer to concentrate on one mode at a time,
 setting your dial frequency to (say) 14.076 for JT65 or 14.078 for
 JT9.  Present conventions have the nominal JT9 dial frequency 2 kHz
-higher than the JT65 dial frequency.  A checkbox labeled *+2 kHz*,
-just below the *Band* selector, makes the appropriate frequency
-settings easy.
+higher than the JT65 dial frequency.  
 
 .Transmitter Audio Level
 

doc/user_guide/wsjtx-main.adoc

@@ -98,6 +98,10 @@ include::transceiver-setup.adoc[]
 [[TUTORIAL]]
 == Basic Operating Tutorial
 
+Sections <<TUT_MAIN,6.1>> through <<TUT_EX2,6.4>> are keyed to the
+needs of operation on the HF bands.  Section <<TUT_VHF,6.5>> has
+additional details of special relevance to VHF-and-up operation.
+
 [[TUT_MAIN]]
 === Main Window Settings
 include::tutorial-main-window.adoc[]
@@ -114,6 +118,10 @@ include::tutorial-example1.adoc[]
 === Sample File 2
 include::tutorial-example2.adoc[]
 
+[[TUT_VHF]]
+=== VHF and Up
+include::tutorial-vhf.adoc[]
+
 [[MAKE_QSOS]]
 == Making QSOs
 include::make-qso.adoc[]