Joe Taylor
1eb0d0471d
Tweak the "m_hsymStop" stop times for optimum EME performance.
2020-12-22 09:56:15 -05:00
Joe Taylor
c3b3dc1c61
Display T M R 73 markers for Q65 (C and higher submodes).
2020-12-21 15:38:58 -05:00
Joe Taylor
044aa80dc4
Remove all vestiges of the QRA64 mode. It has been replaced by Q65.
2020-12-21 15:07:53 -05:00
Bill Somerville
dc771cdd88
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-19 16:34:38 +00:00
Joe Taylor
31189265b9
Erase the yellow "T M R 73" single-tone markers after a mode change.
2020-12-19 11:33:23 -05:00
Bill Somerville
c70fc7b583
Fix a close down crash due to destruction ordering
...
Static QString variables are unwise as QApplication translators may
get destroyed before them.
2020-12-19 16:32:37 +00:00
Joe Taylor
7005ac3c50
Control "Call 1st" visibility with AutoSeq status in Q65 mode.
2020-12-19 09:10:34 -05:00
Joe Taylor
450249dd4c
Add a DT label to the Q65 red sync curve.
2020-12-18 16:19:01 -05:00
Joe Taylor
67b82c7666
Remove the klunky 2D sync plot. The red sync curve is better.
2020-12-18 16:00:33 -05:00
Joe Taylor
5315bbd88a
Don't erase the red sync curve too soon.
2020-12-18 15:14:17 -05:00
Bill Somerville
e7c8eba2a5
Initialize member variable in correct place
2020-12-18 19:59:25 +00:00
Joe Taylor
04b11fda14
Don't plot the green line if using Q65_Sync.
2020-12-18 14:01:10 -05:00
Joe Taylor
b3769bb6c8
For Q65, plot a red "Sync curve" in the Wide Graph.
2020-12-18 13:31:14 -05:00
Joe Taylor
8507a42655
Quasi-graphical display of the sync ccf(f0,DT).
2020-12-17 17:02:28 -05:00
Joe Taylor
7051dc7ee6
Remove more vestiges of the obsolete "JT9+JT65" mode.
2020-12-15 14:48:27 -05:00
Joe Taylor
c4dbfbbdca
Must call wspr_config(false) when entering Q65 mode.
2020-12-09 13:55:47 -05:00
Bill Somerville
5b60ddada1
Merge branch 'feat-fst280' into develop
2020-12-09 15:33:58 +00:00
Joe Taylor
5b59633b2f
Re-enable transmission in Q65 submodes B and higher.
2020-12-09 09:34:09 -05:00
Bill Somerville
7e1b74ecc0
Moon distance in astronomical data window, tnx Charlie, G3WDG
2020-12-08 00:01:46 +00:00
Bill Somerville
9c0fe669d6
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-07 20:43:49 +00:00
Bill Somerville
c9f9c1d7c8
Merge branch 'develop' into feat-fst280
2020-12-07 20:43:28 +00:00
Bill Somerville
b8f9708eac
Merge branch 'release-2.3.0' into develop
2020-12-07 20:43:03 +00:00
Bill Somerville
60792182ad
Environment variables to set audio buffer sizes and fix Windows Rx timing
...
The two environment variables:
WSJT_RX_AUDIO_BUFFER_FRAMES
WSJT_TX_AUDIO_BUFFER_FRAMES
each can be defined to an integer number which will be used as the
suggested audio buffer size for Rx and Tx respectively. Not setting
the variable or setting it to zero or less will cause the default
buffer size to be used, which should be a good choice for most, if not
all, systems.
2020-12-07 20:34:56 +00:00
Bill Somerville
0410f4718f
Merge branch 'release-2.3.0' into develop
2020-12-07 10:44:52 +00:00
Bill Somerville
cefc8e2645
Use the system localized short date format for Log QSO dialog dates
...
This brings these fields into line with other QSO start and end
date/time fields elsewhere in the user interface. Note that time entry
and edit fields use a fixed hh:mm:ss 24-hour clock format consistent
with UTC usage and of suitable accuracy for logging QSOs.
2020-12-07 10:41:33 +00:00
Joe Taylor
d42363587e
Swtich from a fast mode to Q65 now closes FastGraph and opens WideGraph, as it should.
2020-12-06 21:42:30 -05:00
Bill Somerville
3d9a099fce
Reinstate changes that were reverted from commit df2daf6
...
Changes were moved aside to simplify a big merge commit with many
conflicts.
2020-12-07 00:18:52 +00:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280
2020-12-06 22:27:07 +00:00
Bill Somerville
f290cec93b
Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls."
...
This reverts commit df2daf60bd
2020-12-06 17:51:06 +00:00
Bill Somerville
06f9800b2f
Merge branch 'release-2.3.0' into develop
2020-12-05 18:43:00 +00:00
Joe Taylor
6416777278
Set ':' as the "mode character" for Q65.
2020-12-04 15:55:03 -05:00
Joe Taylor
7500adce8b
Allow "@1500", etc., single-tone transmissions in Q65 mode.
2020-12-04 14:53:45 -05:00
Bill Somerville
f3a2c653aa
Revert to default o/s or Qt Tx audio buffer sizes
2020-12-04 18:59:41 +00:00
Bill Somerville
50d0543c03
Test version with environment variable to set Tx audio buffer size
...
WSJT_TX_AUDIO_BUFFER_FRAMES takes the following values:
-1 - use Qt/system default
0 - use 200 mS (WSJT-X default)
+ve integer - value is number of frames at 48 kHz
-1 is likely to be a good choice on Windows and may macOS. 0 has
proven to be good on Windows. On Linux 0 may be OK but we need to try
other values.
The value is only a hint, the actual value used along with the period
size (the size of each chunk of samples requested by the system) is
printed in an info level diagnostic message at the start of each
transmission.
2020-12-03 01:49:21 +00:00
Bill Somerville
94f0af72e3
Command line tool prints WSJT-X version to console, tnx Dave, W3DJS
2020-12-02 01:57:32 +00:00
Bill Somerville
7f1a537e6e
Fix up versioning after merge from release branch
2020-12-01 16:06:56 +00:00
Bill Somerville
4492d8e977
Add tool-tip for "Best S+P" push-button
2020-12-01 15:47:07 +00:00
Bill Somerville
2db2884c39
Fix regression with selecting a working frequency when changing mode
2020-12-01 15:11:36 +00:00
Bill Somerville
6a44e68033
Repair regression that stopped Best S&P transmitting on a match
...
This change also ensures that second or subsequent matches in the same
T/R period do not trigger a QSO with a new QSO partner.
2020-11-27 12:36:24 +00:00
Bill Somerville
3663b3ea32
MultiGeometryWidget template class abstracts window geometry changes
2020-11-27 01:14:12 +00:00
Bill Somerville
0fc5639fd5
Repair a regression causing missing Rx decode timestamps in ALL.TXT
2020-11-18 02:06:30 +00:00
Joe Taylor
abe06e5dbb
Access Q65 Quick-Start Guide from Help menu.
2020-11-17 10:46:20 -05:00
Bill Somerville
a1808c99f7
Fix issue with main window height growing on restart
2020-11-17 00:55:24 +00:00
Joe Taylor
eeed375baf
Tell user to go back it he selects F+H in a mode other than FT8.
2020-11-16 16:28:37 -05:00
Bill Somerville
f10d6fb712
Fix regression in hiding Rx Frequency window titles & headings
2020-11-16 17:36:50 +00:00
Bill Somerville
3cd567e464
Allow decodes window splitter widget to shrink its height further
2020-11-16 17:24:10 +00:00
Joe Taylor
7f772ecc53
Don't set a global minimum height: SWL mode wants much less.
2020-11-16 11:49:01 -05:00
Joe Taylor
bbcc9419b4
Set a mainwindow minimum height.
2020-11-16 10:37:09 -05:00
Joe Taylor
df2daf60bd
Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls.
2020-11-16 10:06:10 -05:00
Bill Somerville
09a8b3f5ef
Reinstate RC nag
2020-11-15 01:12:55 +00:00
