Steven Franke
0173ea4d6d
1. Initialize m_msg[0][0] to stop garbage decode right after startup. 2. Decouple RxFreq spinbox from printed/decoded frequency. 3. Limit RxFreq to 25 Hz steps in the range [1400,1600] when in MSK144 mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7137 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 00:23:09 +00:00
Joe Taylor
8dc2fef844
Back out some changes that were broken. PSK reporter not yet functional for MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 20:10:46 +00:00
Joe Taylor
23785f60e4
Oops! Committed wrong versions. This code is not ready for use!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:40:26 +00:00
Joe Taylor
02ef8823ef
1. Allow Ftol down to 20 Hz in MSK144 mode.
...
2. Do not adjust Rx Freq automatically after an MSK144 decode.
3. Insert the Rcvd report in log window.
4. Send MSK144 decodes to PSK Reporter.
NB: not all these are fully tested, yet.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:32:16 +00:00
Steven Franke
4fe86cef1e
Try to squash double-decodes and gibberish prints.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 18:13:39 +00:00
Joe Taylor
2ba4865d84
This should have been committed with r7121.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 15:55:53 +00:00
Joe Taylor
bee5ea4c71
Minor cleanup; add some !$OMP stuff to msk144sync.f90, but it's not yet functional.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7119 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 16:39:14 +00:00
Joe Taylor
cd0895c26a
Add a performance monitor for real-time MSK144 decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 13:29:20 +00:00
Joe Taylor
57a5ad188d
Send ndepth (value = 1, 2, or 3) to hspec(). MSK144 click-to-decode now calls
...
the old fast_decode(); probably it should call hspec() instead?
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 20:41:41 +00:00
Joe Taylor
6579b93690
Progress toward full implementation of real-time decoding of MSK144.
...
I believe file saving and auto-sequencing nor work. Not sure about posting
to PSK reporter: please check.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7112 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 19:08:19 +00:00
Steven Franke
f210e47cd5
MSK144:
...
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines.
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Steven Franke
3df371f11b
New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-23 22:28:11 +00:00
Joe Taylor
3b97ae7417
Implement real-time decoding in MSK144 mode, for testing.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
Joe Taylor
68be179f34
Reconfigure mainwindow GUI properly after MSK144 -> WSPR -> MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7093 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 15:32:01 +00:00
Joe Taylor
c4d00b0f47
1. Display proper UTC on Fast Graph for files read from disk.
...
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 13:34:40 +00:00
Joe Taylor
b15e3aed04
when TRperiod < 30 s, expand the Fast Graph scale so full width is 15 s.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 14:18:40 +00:00
Joe Taylor
c8d795df0a
Increase range of report spinbox in MSK144 to -8 --> +24 dB. Limit the yellow click-to-decode bar to max at TRperiod.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7084 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 17:06:49 +00:00
Joe Taylor
3b93cd02b6
Spinners fopr Rx Freq and Tx Freq should not have been made visible in MSK144 mode; they are ignored in this mode, as present.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7080 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 21:20:16 +00:00
Joe Taylor
13ffbb20eb
Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00
Joe Taylor
6243f89c35
Make Rx Freq and Tx Freq spinners visible in MSK144 mode. (Tx Freq is disabled.)
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7078 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:11:27 +00:00
Joe Taylor
7f039d57b4
Remove the arbitrary "-5 dB" from signal-meter readings.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7077 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 12:51:34 +00:00
Bill Somerville
66eaf24af0
Add a configurations button to the rig error message box
...
This button pops up the same context menu as the configurations button
on the main window menu bar. This allows the operator to easily escape
from an incorrectly configured configuration without changing it.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7075 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:50 +00:00
Joe Taylor
73612cf6a5
Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:37:00 +00:00
Joe Taylor
05c19aecd2
Fix a bug intruduced in r7060 that prevented reading .wav files in fast modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7069 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 17:46:09 +00:00
Joe Taylor
2d9b729c6c
Don't show the Auto Seq checkbox when it's not relevant.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7062 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 12:54:09 +00:00
Joe Taylor
1ecc3d7c01
Correct the m_hsymStop values for slow modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7060 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 19:00:55 +00:00
Joe Taylor
d3182f4161
Remove the "Robust sync" option.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 17:26:05 +00:00
Joe Taylor
ec281f93c4
Add a user control for Tx Delay, on the Advanced tab.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 23:18:48 +00:00
Joe Taylor
cbc4ef1b49
Change cbEME to cbAutoSeq (always). Protect against frequency jump in MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 15:36:17 +00:00
Joe Taylor
d99770d664
RO, RRR, 73 short messages apply only to JT65.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 14:01:28 +00:00
Joe Taylor
255b712602
Make Sh box visible and used in JT65 VHF-enabled mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 13:06:01 +00:00
Joe Taylor
1066dc2508
Don't allow naggressive > 0 unless VHF Features and Single Decode are both checked.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7054 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-05 17:33:07 +00:00
Bill Somerville
bdc8dd881c
Now 6 digit locators are possible again add option to prefer type 1 WSPR messages
...
This option, on by default, maintains backwards compatibility for
non-compound callsign holders. If switched off and they have
specified a 6 digit grid then it will be sent in the type 2 protocol
using two messages and a hashed callsign.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7053 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-03 23:33:13 +00:00
Steven Franke
ca19e977c0
Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7051 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-01 21:50:52 +00:00
Bill Somerville
d58a7e0311
Fix an issue with 6 character grids not being used in WSPR
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7042 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:02:01 +00:00
Bill Somerville
d2a191aca0
Clear the DX grid if the base call of the DX call changes
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7040 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:46 +00:00
Bill Somerville
81ad76cacc
Produce a warning message if the WSPR .c2 file cannot be written
...
Thanks to Mike W9MDB for this patch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7039 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:38 +00:00
Bill Somerville
7350eb0892
Strip decode quality information from decoded messages before parsing by double click
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7037 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:22 +00:00
Joe Taylor
c8e340cf88
1. Correct the max length of MSK144 decoded text strings. Thanks Mike!.
...
2. Suppress rare QRA64 garbage decodes that contain "000AAA".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7033 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-16 19:17:45 +00:00
Bill Somerville
cc178ab6fa
Create the splash screen before assigning the application name
...
Even though the splash screen does not have a title it seems to
interfere with JTAlert which enumerates window titles to identify
WSJT-X instances. I'm not sure why this is necessary, but if it helps
it should be benign.
Ensure that the splash screen is hidden before any message boxes are
shown, this is essential at startup if there is a stale lock file or
rig control error.
Be far less aggressive about bringing the splash screen to the top of
the application window stack. This may cause the splash screen to be
obscured on some platforms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7025 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-12 16:12:52 +00:00
Steven Franke
f803c5cf6f
Add new MSK144 encoding routines and make the necessary accommodations.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7022 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-11 19:25:20 +00:00
Bill Somerville
afed56d008
Proper splash screen and release notes help menu link
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7007 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-06 13:52:14 +00:00
Joe Taylor
9684106dd7
1. Fix the nfqso < nf1 but in qra64.f90.
...
2. Delay splash screen until after main window starts.
3. Keep cbTxLock enabled in QRA64 mode.
4. Update v1.7_Features.txt.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7005 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-05 14:14:24 +00:00
Joe Taylor
9993760bac
Re-enable MSK144 click-to-decode, top panel only.
...
Fix the improper display of "Fast" checkbox.
Disable "CQ nnn" checkbox if MyCall is not K1JT or K9AN.
Use AppDir as path to execute the LDPC encode program.
Don't display submodes in mode label for JTMSK, MSK144.
Make Rx Freq spinner invisible in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7001 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 19:30:27 +00:00
Joe Taylor
5d68d2f1c8
Quantize short reports to 4 bits: -3 0 3 6 10 13 16 RRR 73.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6998 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 16:05:10 +00:00
Joe Taylor
dc7826d5ea
Startup messge box for Alpha Release. New sigma limit in detectmsk40. Minor tweaks to GUI.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 15:20:16 +00:00
Joe Taylor
b299c8d5ad
For now, remove the restrictions on use of QRA64 and MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 20:40:49 +00:00
Joe Taylor
ab8b6d0383
Move ldpc temporary files into platform-independent location.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6991 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 19:04:21 +00:00
Joe Taylor
8159e2da50
Tentative and temporary change to encode MSK144 in a separate process.
...
NB: temporary files are being written to execution directory!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6989 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 15:34:42 +00:00
Joe Taylor
289ba66119
1. Fix cause of "frozen UTC" bug in MSK144 mode. (Could there be more than one cause?)
...
2. Fix failure to remember Ftol setting in MSK144 mode.
3. Remove obsolete controls from Advanced tab.
4. Add control for "x 2 Tone spacing" on Advanced tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-01 19:46:19 +00:00