Commit Graph

301 Commits

Author SHA1 Message Date
Steven Franke
f210e47cd5 MSK144:
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines. 
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Joe Taylor
c4d00b0f47 1. Display proper UTC on Fast Graph for files read from disk.
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 13:34:40 +00:00
Joe Taylor
13ffbb20eb Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00
Bill Somerville
66eaf24af0 Add a configurations button to the rig error message box
This button pops up the same context menu as the configurations button
on the main window menu bar. This allows the operator to easily escape
from an incorrectly configured configuration without changing it.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7075 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:50 +00:00
Joe Taylor
1ecc3d7c01 Correct the m_hsymStop values for slow modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7060 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 19:00:55 +00:00
Joe Taylor
cbc4ef1b49 Change cbEME to cbAutoSeq (always). Protect against frequency jump in MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 15:36:17 +00:00
Steven Franke
ca19e977c0 Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7051 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-01 21:50:52 +00:00
Bill Somerville
afed56d008 Proper splash screen and release notes help menu link
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7007 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-06 13:52:14 +00:00
Joe Taylor
9684106dd7 1. Fix the nfqso < nf1 but in qra64.f90.
2. Delay splash screen until after main window starts.
3. Keep cbTxLock enabled in QRA64 mode.
4. Update v1.7_Features.txt.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7005 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-05 14:14:24 +00:00
Joe Taylor
9993760bac Re-enable MSK144 click-to-decode, top panel only.
Fix the improper display of "Fast" checkbox.
Disable "CQ nnn" checkbox if MyCall is not K1JT or K9AN.
Use AppDir as path to execute the LDPC encode program.
Don't display submodes in mode label for JTMSK, MSK144.
Make Rx Freq spinner invisible in MSK144 mode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7001 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 19:30:27 +00:00
Joe Taylor
8159e2da50 Tentative and temporary change to encode MSK144 in a separate process.
NB: temporary files are being written to execution directory!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6989 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 15:34:42 +00:00
Bill Somerville
c586204d75 Add proper Qt validation for callsigns and grids
Two      new     validator      classes     CallsignValidator      and
MaidenheadLocatorValidator   are   introduced    and   used   in   the
Configuration and MainWindow implementations.

MaidenheadLocatorValidator  supports  different  lengths  and  minimum
required  lengths  with  a  default of  subsquare  with  square  being
required.

The  message_aggregator  application has  been  enhanced  to show  the
current DX call and DX grid as shown in the WSJT-X main window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-10 22:20:30 +00:00
Bill Somerville
396dd6d491 Furter attempts to get the Tx watchdog and its UDP Status Message right
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6901 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-09 18:35:25 +00:00
Bill Somerville
46ff34a04a Refactor a poor variable name
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6898 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 20:45:45 +00:00
Bill Somerville
3f1ea9d10c Make message boxes more platform independent with a wrapper
Instead  of  using the  Qt  QMessageBox  class  directly a  new  class
MessageBox  (MessageBox.hpp)  has been  added  to  deal with  platform
independence issues like the title not being shown on Mac OS X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-03 20:31:19 +00:00
Joe Taylor
3016ccee01 Many renames: QRA65 --> QRA64, QRA02 --> QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 12:15:41 +00:00
Bill Somerville
23e4f34612 Switch to status bar notification of runaway Tx watchdog
Rationalize the status bar construction and maintenance.

Ensure that incoming UDP Reply messages reset the watchdog.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6847 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 00:25:38 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 11:36:59 +00:00
Bill Somerville
c864766332 Ant mouse press or key press in the main window resets the Tx watchdog
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6831 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 16:25:47 +00:00
Joe Taylor
100c3d3121 More changes for QRA01 --> QRA02.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6825 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-29 19:12:46 +00:00
Bill Somerville
c69bfee149 Fast mode audio recording behaves the same way as slow modes
Fixed naming of fast recording files.

Tidied some signal/slot plumbing in the fast plotter.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6806 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 17:01:51 +00:00
Joe Taylor
9c19ff3eea Making progress on what will become QRA65 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6794 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-22 20:26:41 +00:00
Bill Somerville
2beef948d9 Adaptive sample block size to match FFT sizes
This  change  corrects timing  discrepancies  on  the horizontal  fast
spectrum plot.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-17 01:27:00 +00:00
Bill Somerville
8e43af11e5 Fix numerous memory leaks and uses of uninitialized variables
These were discovered when running under teh valgrind MemCheck tool. I
have also  checked in a suppressions  file (wsjtx-valgrind.linux.supp)
suitable for use on Linux when running the valgrind MemCheck tool.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-10 15:54:16 +00:00
Bill Somerville
7be033e8c2 Report WAV file reading and writing errors
Refactor the  save WAV  file routine  to return an  error string  as a
promise and then get that result and report in a QMessageBox.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6752 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 23:39:41 +00:00
Joe Taylor
df518f4e1d Make it possible to find MSK144 code-definition files in the "data_dir" on all platforms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6747 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 15:06:15 +00:00
Joe Taylor
143736129b Starting to implement the hooks for interfacing to QRA mode.
Pass file path for peg-128 files to fast_decode().  (Inelegant, but it works.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-08 21:20:58 +00:00
Joe Taylor
9845494276 Install MSK144 as a new mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6721 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-03 15:45:54 +00:00
Bill Somerville
3ec6d211c8 Extend UDP status message - added Rx/Tx DF, call and grid information
Build now creates and installs a  UDP library that contains the server
side  of the  UDP messaging  facility.  This  library is  used by  the
udp_daemon and message_aggregator reference  examples. The new library
is  currently a  static archive  but  can also  be built  as a  shared
library.  The library  allows third  party Qt  applications to  easily
access UDP messages from WSJT-X.

Refactored  the  message_aggregator  reference example  to  split  out
classes into  separate translation  units. Added new  functionality to
exercise  the  new  UDP  status fields,  highlight  own  call,  CQ/QRZ
messages and decodes near Rx DF.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6691 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-24 10:08:35 +00:00
Bill Somerville
cc8d2130c6 Improved subprocess handling and error reporting
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-07 19:32:52 +00:00
Bill Somerville
080f7ef1a2 Make mutable static variables instance variables where necessary
Static storage variables that should  have been class members are made
so. This  ensures that  if they  are used  as initialization  one time
switches   then  they   will  operate   correctly  when   their  class
instantiated more than once. This now happoens for most classes due to
the configurations  switching facility which destroys  all windows and
re-instantiates them.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6661 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-01 00:40:51 +00:00
Bill Somerville
1cae0b8aa9 Move temporary directory creation and deletion outside of MainWindow
Changing configuration causes  WSJT-X and JTAlert to get  into a fight
for the temporary directory. By moving the creation and clearup of the
temporary directory outside  of the configurations loop  this issue is
minimized to no worse than before multiple configurations were added.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 21:59:22 +00:00
Bill Somerville
4cebdddfe5 Add multiple configurations navigation and management
Multiple configurations  are accessed and  maintained from a  new main
window menu bar  pop up menu "Configurations". The  prior settings are
the  "Default"  entry. New  configurations  may  be added  by  cloning
existing ones.  Maintenance  and navigation is via sub  menus for each
configuration.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-17 23:39:12 +00:00
Joe Taylor
b843894061 First working code offering optional computation and use of a reference
spectrum.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6608 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-11 20:53:54 +00:00
Joe Taylor
88e47a5941 Working on implementing reference spectra.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6600 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-08 15:23:32 +00:00
Bill Somerville
2cfbb15b4f Rig control overhaul to implement generic Doppler shift tracking
The  concept of  a nominal  receive  and transmit  frequency has  been
introduced. This is  used as a base frequency  for Doppler correction,
frequency setting  and reporting. The  start up frequency is  now zero
which is  updated by the first  rig control status report.  This needs
more  work to  accommodate  calling frequency  plus working  frequency
operation as is used for random MS operation etc..

The  main  window  frequency  display  now  shows  the  transmit  dial
frequency while transmitting.

The mode changing logic sequence has been changed such that the rig is
correctly put  into and  taken out  of split mode  as required  by the
target mode.  This also  avoids the "other"  VFO having  its frequency
changed when  entering a mode that  does not use split  operating like
WSPR.

The main window  band combo box edit  may now be used to  input an kHz
offset  from the  current MHz  dial  frequency. This  is intended  for
setting  a sked  or working  frequency on  the VHF  and up  bands. For
example the working frequency for 23cms  might be set to 1296MHz and a
working  frequency of  1296.3MHz would  be selected  by selecting  the
23cms band  with the combo box  drop down list and  then entering 300k
into the band combo box edit widget.

When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such  that the frequency  clicked on  becomes the Tx  and Rx
frequency using  the fixed 1000Hz  DF that  JT4 modes use.   This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF  for both Tx and Rx and therefore
one  can "net"  to an  off frequency,  but visible  on the  waterfall,
caller with one click.

Improvements to OmniRig  rig control including use of  the serial port
control lines RTS or DTR, on the  CAT serial port used by OmniRig, for
PTT control.

Incrementing transaction sequence numbers added to messages to and from
the rig control  thread. This enables round trip status  to be tracked
and associated with a request. For  example a command that might cause
several  asynchronous  status  updates  can  now  be  tracked  in  the
originating thread such  that it is clear which updates  are caused by
executing the  request. This in turn  allows updates to be  held until
the request is complete i.e. the  state is consistent with the results
of the request.

Messages  to the  rig control  thread are  now posted  as a  new state
(Transceiver::TransceiverState) object. The  rig control thread tracks
requests and  actions any differences  between the prior  requests and
the new state.

The rig  control thread is now  stored on the  heap so that it  can be
closed down  and released as needed.  Along with this the  rig control
close  down  semantics  are  better defined  avoiding  some  potential
deadlock situations.

If the rig  is placed into split  mode it will be  reverted to simplex
mode when the rig connection is closed.

When  using direct  rig control  via Hamlib,  rigs that  have A/B  VFO
arrangements and  no method to query  the current VFO like  many Icoms
and  the Yaesu  FT-817/857/897(D)  series now  have smarted  frequency
updating requiring no  VFO changes when changing  the frequency.  This
is particularly  important when doing  Tx Doppler correction  to avoid
glitches.

The implementation  of emulated  split operating  mode ("Fake  It") is
simplified and improved.

A dummy  Hamlib transceiver for PTT  control on a separate  port is no
long instantiated if CAT or VOX PTT control is selected.

The resolution and  any rounding of the rig CAT  frequency set and get
commands is determined automatically  upon opening the rig connection.
This is needed to determine the  rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.

Frequency  calibration is  calculated separately  for the  receive and
transmit frequencies.

Whether  the  rig  modulation  mode  should be  controlled  is  now  a
constructor  argument rather  than  being passed  with individual  rig
control requests.

Doppler  shift  correction  is   considerably  enhanced  with  simpler
controls and much  better rig control.  A new mode  of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via  CAT  when transmitting.   Such  rigs  have a  Doppler  correction
calculated  for the  middle of  the next  transmit period  just before
transmission starts. While  using Doppler tracking it  is now possible
to adjust the  sked frequency either using the new  kHz offset feature
of the main  window band combo box  or by directly tuning  the rig VFO
knob while holding down the CTRL key.

The astronomical data window that includes Doppler tracking control is
now opened  and closed using a  checkable menu item to  avoid it being
accidentally closed.

Debug  configuration  rig  control  diagnostic  messages  now  have  a
facility argument for clearer and more standardized trace messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
Joe Taylor
a74d000c32 Correct the Tx message length and adjust reported SNR for short JTMSK messages.
Commit some things omitted last time.   


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6420 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-22 17:06:57 +00:00
Bill Somerville
4e6de783b0 Use new WAV file class (BWFFile) read and write WAV files
Saved WAV files now contain some useful metadata.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6383 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-11 15:00:43 +00:00
Bill Somerville
0ba0977aa2 User Guide localization
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6341 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-02 22:30:12 +00:00
Bill Somerville
924e20efa8 Add a sample download dialog and upload sub-system
Samples are  downloaded from a  web server, currently the  SF download
server.   The samples  are  stored in  the  source controlled  samples
directory and the CMake script  there builds a suitable directory tree
for upload to the web  server under samples/web containing the samples
hierarchy and the  generated JSON contents database  file. The samples
CMake script also  defines an 'upload-samples' target  that uses rsync
to efficiently upload  the samples and the  accompanying contents JSON
database file.

Any directory structure under the samples directory may be created, to
add a new sample file simply add  the file to source control and amend
the list of sample files (SAMPLE_FILES) in samples/CMakeLists.txt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6308 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-24 11:41:05 +00:00
Bill Somerville
d5bc774641 Get rid of jt9com and npar common blocks
Also  use correct  C binding  and have  compilers determine  sizes and
offsets.

The wsjtx.exe program now owns the  decoder shared data that is shared
with symspec.  It is now in  struct dec_data, still a  global variable
for now but hopefully a MainWindow member variable soon.

The struct  dec_data (in both C/C++  and Fortran) has a  sub structure
with the decoder  parameters which enables copying  and manipulating a
lot cleaner.

New  of  changed types  of  shared  data  must  still be  modified  in
commons.h and a  new file lib/jt9com.f90, they must stay  in sync as a
pointer to the structure is passed between C and Fortran.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6290 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-17 20:29:55 +00:00
Bill Somerville
523ee92a70 Pwr control refinements
Set tune power with SHIFT + "Pwr"  slider. SHIFT + "Pwr" slider to top
cancels separate  power level  for tune.  Smarter  tool tip  for "Pwr"
slider.

Needs User Guide update if change is acceptable.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6284 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-16 20:55:19 +00:00
Bill Somerville
2aea76777a Remember power level setting used for tune
Patch provided by Mike W9MDB, thanks.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6281 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-16 15:32:11 +00:00
Joe Taylor
475118428e Add facility to degrade S/N of data from .wav files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 18:05:36 +00:00
Bill Somerville
1a23757b26 Reintegrate merge from wsjtx_exp branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-18 01:28:12 +00:00
Bill Somerville
58fab3474d Add WSPR decodes to UDP message protocol
The message_aggregator (MessageAggregator.cpp) has  been updated to do
something with WSPR decodes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6101 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-15 23:03:11 +00:00
Joe Taylor
a7e2168532 Remove code associated with the unimplemented JT9W mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6061 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-09 17:19:48 +00:00
Bill Somerville
76eed0ecc4 Start dealing with thread related object lifetime issues
There are  several object  lifetime issues that  can cause  crashes on
application close down.  This change  is the first phase of addressing
these issues.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5719 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-13 11:00:55 +00:00
Bill Somerville
1c8d8f749c Ensure that the WSPR Tx percentage is correctly initialized
Also tidied some code up.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5700 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-07 19:02:25 +00:00
Bill Somerville
e0d4a2b2fb Update decodes widgets when entering and leaving WSPR modes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:20 +00:00
Bill Somerville
3dd824ad6b Make the main window more portable and font change capable
The Rx meter  is now a better  Qt citizen and can be  resized. Added a
more obvious peak signal indicator. It  is now a custom widget derived
from QFrame and is now directly added via promotion in Designer.

Added a custom  widget to act as  a letter spin box, this  is used for
sub mode control.  Switched the frequency tolerance widget  to a combo
box with preset  values so that it is more  uniform across systems and
font sizes.

Added container widgets  for group control of various  UI widgets such
as  QSO controls,  DX call  controls and  WSPR controls.  Introduced a
stacked widget to allow the WSPR controls to be swapped in in place of
the "QSO" controls. The "QSO" controls  are are the Rx, Tx and related
controls along with  the main tab widget with the  message buttons and
fields. This means  that the WSPR version of the  main window (and EME
Echo mode) are now much cleaner.

Increased the  size of the  rig control  widget and styled  its colour
using a dynamic property so that it  can be defined in the Designer UI
definition. Reinstated it  as a push button to do  a rig control reset
and retry after an error.

Reset most UI widgets to default properties, particularly removing any
fixed sizes so that they can resize freely when fonts are changed. The
overall layout is now controlled almost exclusively by stretch factors
on some of the rows and columns of the various grid layout managers.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-25 22:41:13 +00:00
Bill Somerville
46032112ca Clear generated messages when clearing DX after logging
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-18 22:18:05 +00:00
Joe Taylor
df873479d0 Add UTC to WSPR Tx dividing line; add WSPR Rx dividing line when no decodes;
increase ranges of Gaiz/Zero sliders on Echo Graph.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5605 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-13 14:24:54 +00:00
Joe Taylor
55cdeea079 Oops! Bad Rx frequencies were being recorded in WSPR_history.txt. Fixed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5603 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 21:46:54 +00:00
Bill Somerville
3df86ef17e Initialize m_tuneup to ensure halt Tx button behaves
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5601 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 19:03:37 +00:00
Joe Taylor
f3a0cee87c WSPR mode appends Date Time Freq T/R N to file WSPR_history.txt.
For possible statistical analysis.  N is the number of decoded signals.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5599 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 17:29:12 +00:00
Bill Somerville
588c037ae9 Do not make unneeded rig adjustments when Doppler tracking disabled
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5595 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 00:26:44 +00:00
Bill Somerville
724d5703c4 Add a flag for a mode to enforce simplex i.e. WSPR
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5593 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 22:42:41 +00:00
Joe Taylor
e38c71af1e Clear Message Averaging window when ClrAvg is clicked. Remove some
obsolete code.  Tweak a label.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 17:18:07 +00:00
Joe Taylor
289b4c70f8 Correct the bounds error test in avecho. Ensure proper GUI controls
visible in Echo mode. Reset nsum=0 when Tx Enable is toggled ON in Echo mode.
Don't restart Monitor after finishing a sequence of Echo transmissions.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5584 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 15:32:55 +00:00
Bill Somerville
aa561deed2 Refactor astro functionality into Astro class
Improved astronomical data and Doppler tracking control window widgets
and layout  management to make  it more platform independent  and font
change tolerant.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5580 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 13:36:13 +00:00
Joe Taylor
7137098869 Results of Echo mode to text window. (Not yet calibrated!)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5567 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 19:04:21 +00:00
Bill Somerville
28b4c31dee Various WSPR fixes
Make WSPRnet.org spot uploads tolerant  of network issues, spots still
get  discarded for  any period  that  has problems  but now  uploading
resumes on the next period.

Ensure that  decoded text starts  with correct  font by not  using the
base class append method directly.

Fixed a major  memory leak in the WSPRNet class  which was not freeing
processed request reply objects.

Added some helpful debug prints in WSPRnet.org spot processing.

Also  tidied  up a  number  of  class  implementations that  were  not
including he MOC generated code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5560 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 14:30:23 +00:00
Joe Taylor
4b1c3c319f Echo spectrum appears OK; must test Doppler corrections in both modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5559 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 00:43:07 +00:00
Joe Taylor
fa96482008 Basic functionality of Echo spectrum is in place.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5557 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 19:42:20 +00:00
Bill Somerville
982b4edcd0 Refactored help windows into a helpful class
Also  used it  to implement  the  prefixes, shortcuts  and mouse  help
windows.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5554 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 16:05:01 +00:00
Bill Somerville
05a060c740 Make addon prefixes & suffixes help window platform independent
Also use a style  sheet to set the font as  widget level font settings
are overriden when the global default font is changed in settings.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5553 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 14:30:31 +00:00
Joe Taylor
01dfb567f5 Don't allow a partial transmission in Echo mode. Fix RA, Dec, and Tsky
returned by astro().  



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5548 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 18:02:39 +00:00
Bill Somerville
db731fefb9 Improved function name
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5547 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 13:40:10 +00:00
Joe Taylor
1b0ba09639 More changes related to EME Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 00:02:02 +00:00
Steven Franke
7e3c93553f Enable new TX scheduler for WSPR mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 22:25:27 +00:00
Joe Taylor
d72b85d6c9 Progressing toward activation of EME Echo mode. Not there yet!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5528 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 19:46:12 +00:00
Joe Taylor
437c8c5c3f Starting to add EME Echo mode. (Not yet functional!)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5522 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 16:42:38 +00:00
Bill Somerville
f3930eb5c8 Polish the UI for WSPR and WSPR band hopping
Provide  a  dialog for  band  hopping  scheduling which  replaces  tab
four. Ensure that split mode is  not used for WSPR. Select the correct
tab  for WSPR  operation.  Shift WSPR  band hopping  code  out of  the
MainWindow class.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 01:45:40 +00:00
Bill Somerville
4a445b0779 Add FrequencyList methods to retrieve band name sets
Start to rationalize the new WSPR code with the data models.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5475 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 11:51:40 +00:00
Joe Taylor
7390bf21ce WSPR-mode behavior changes.
Forbid consecutive Tx sequences.
Mark Tx sequences with horizontal yellow line in waterfall.
Reduce the wait time in msleep() command (mainwindow.cpp line 4342).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 16:08:20 +00:00
Steven Franke
c0fc6ef382 Commit wspr tone frequency patch and fix GrayLineDuration typo
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 19:23:54 +00:00
Bill Somerville
f200506571 Add mode dependent working frequencies
Working frequencies are mode dependent  and a reset to defaults button
has been added.

Also re-factored much of the model  and item delegate code to simplify
several  of the  model  implementations. Introduced  a single  routine
called from main to register the custom types with Qt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 23:22:17 +00:00
Bill Somerville
0f7708a98a Respond to clicks on Gen/Free radio buttons even if checked
The generated and free text radio buttons now refresh the sent message
even if teh clicked radio button is already checked.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5444 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 15:44:03 +00:00
Bill Somerville
34f8924cfc Reintegrate the wsjtx_exp branch into the trunk
This  merge brings  the WSPR  feature development  into the  main line
ready for release in a future v1.6 release.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-27 13:08:28 +00:00
Bill Somerville
a51c5c4251 Reintegrate Joe's experimental VHF & up features
As at ^/branches/wsjtx_exp@5271



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-22 17:48:03 +00:00
Bill Somerville
3f75b4144a Send status information to UDP server
To  facilitate interaction  with other  applications WSJT-X  now sends
status  updates  to  a  predefined   UDP  server  or  multicast  group
address. The  status updates include the  information currently posted
to  the  decodes.txt and  wsjtx_status.txt  files.   An optional  back
communications  channel is  also implemented  allowing the  UDP server
application to control some basic actions in WSJT-X.

A reference implementaion of a typical UDP server written in C++ using
Qt is  provided to demonstrate  these facilities. This  application is
not intended  as a user  tool but  only as an  example of how  a third
party application may interact with WSJT-X.

The  UDP messages  Use QDataStream  based serialization.  Messages are
documented in  NetworkMessage.hpp along with some  helper classes that
simplify the building and decoding of messages.

Two  message  handling  classes   are  introduced,  MessageClient  and
MessageServer.  WSJT-X uses the MessageClient class to manage outgoing
and  incoming  UDP  messages   that  allow  communication  with  other
applications.   The MessageServer  class implements  the kind  of code
that a  potential cooperating  application might use.   Although these
classes  use  Qt serialization  facilities,  the  message formats  are
easily  read and  written  by  applications that  do  not  use the  Qt
framework.

MessageAggregator   is   a   demonstration   application   that   uses
MessageServer and  presents a GUI  that displays messages from  one or
more  WSJT-X instances  and  allows sending  back a  CQ  or QRZ  reply
invocation  by double  clicking  a decode.   This  application is  not
intended as  a user facing tool  but rather as a  demonstration of the
WSJT-X UDP messaging facility. It  also demonstrates being a multicast
UDP server by allowing multiple instances to run concurrently. This is
enabled by using an appropriate  multicast group address as the server
address.  Cooperating   applications  need  not   implement  multicast
techniques but  it is recomended  otherwise only a  single appliaction
can act as a broadcast message (from WSJT-X) recipient.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 16:40:49 +00:00
Bill Somerville
083416e8ba Refine the special treatment of 73 messages
The  feature to  set the  next message  to be  sent to  auto generated
message number 6 (CQ) is now only trggered when a transmission of a 73
message is made for the first time in a QSO. If a second 73 message is
required, for example when a QSO  partner repeats an RRR message after
your 73 message, simply double  clicking the RRR message will initiate
another 73 message without triggering a  log QSO dialog or setting the
next message to CQ.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5065 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-17 14:59:19 +00:00
Bill Somerville
2b781d1685 Improved automatic message handling
More consistent and accurate processing of compund callsigns including
recognizing the  user's call  in both base  and fully  qualified form,
extracting reports  from special type  one and type two  compound call
messages.  Ensure that  "CQ DX"  message prefixes  are recognized  and
processd correctly.

The  cycle of  double  clicking through  a QSO  has  been enhanced  to
recognoize the  standard messages correctly  and use the  correct next
message. The automatic  transmission button "Enable Tx"  now does what
it says and does not double as a stop transmit button. This allows the
current transmission  to complete  even if the  automatic transmission
feature is  disabled. In line with  this the "stop sending  after a 73
message is sent"  feature turns off the  automatic transmission enable
at the start of the sending of  a 73 message and also the next message
is now set up as the CQ  message automatically in this scenario.  A 73
message is now  either a standard message containing the  word "73" or
any free text  message containing "73" (not necessarily  as a distinct
word").

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-14 19:13:18 +00:00
Bill Somerville
6bd4602662 QtCreator/QtDesigner don't understand their own classes
Wrapping the  Ui:: UI  class in a  QScopedPointer, a  perfectly proper
thing to do, causes QtDesigner to fail to grok the code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5019 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-08 00:06:43 +00:00
Bill Somerville
9a8521d2d4 Add a progress dialog to show that FFT optimization is doing something
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4965 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-15 00:48:38 +00:00
Bill Somerville
127c633a97 Bring colour settings into line with general configuration strategy
Colours behave  like other  configuration items  and changes  are only
applied when the Settings UI is dismissed via the "OK" button.

Simplified font settings and use  style sheets consistently to set the
application and decoded  text fonts. This is necessary  because any UI
widget that  has a style  sheet applied does not  honor a font  set by
QWidget::setFont()  even if  there is  no  font setting  in the  style
sheet, this is broken behaviour IMHO  but that is the way Qt currently
works.

Use a  style sheet to style  the frequency display and  clock. This is
necessary to  allow fonts to  be cascaded through parent  style sheets
and still be overridden on these widgets.

Simplify  the decoded  text  widgets,  there is  no  need  to use  the
QTextBrowser  as a  super class  since  the simpler  QTextEdit set  as
read-only is sufficient. Also removed  colour setting via a background
brush  as it  doesn't  work  and the  HTML  'bgcolor' attribute  works
correctly.

Change  to  UI  properties  of  the  decoded  text  widgets  to  allow
horizontal scrolling if required, this  allows larger fonts to be used
without truncating decoded messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 08:53:02 +00:00
Bill Somerville
f37ed4cd78 Take advantage of the new KVASD v1.12
Pass the  temporary directory to  jt9 and use  it to give  the correct
paths  to  temporary files.  Also  jt9  passes  the absolute  path  to
kvasd.dat in the temporary directory to kvasd.

Clear out all the annoying cruft that has accumulated due to having to
run with $CWD as the temporary directory.

Use QStandardPaths  to find the  writable data directory  where needed
rather than passing it around  between objects. This now works because
the $CWD hasn't been changed.

Do away with the CMake option WSJT_STANDARD_FILE_LOCATIONS as it is no
longer needed.

Fix astro status file azel.dat formatting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-03 00:06:54 +00:00
Joe Taylor
021f677687 Add wisdom for the FFTs done by symspec_(), wsjtx[.exe].
Also complete the wrapper code in wisdom.c.
TBD: should be possible to use fftw3f.f03 instead of the ad hoc wisdom.c.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4617 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-21 15:17:22 +00:00
Joe Taylor
0e96882d8b Improve the way messages with compound calls are automatically generated.
Routine packmsg now tries the shortlist (Type 1 prefix or suffix) first.
Then it tries to to make a valid message using a Type 2 prefix or suffix.
If both fail, it packs the first 13 characters as a free-text message.

The GUI now generates the most useful messages with compound callsigns
of all valid types.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-19 00:56:41 +00:00
Bill Somerville
c40cec50de Menu action to open the log directory
Since the log files have moved to  a hidden directory a menu action to
open the logs directory in a suitable system applicaiton is needed.

Added "Open log directory" to File manu bar pop up menu.

Merged from wsjtx-1.4 branch.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-04 11:47:03 +00:00
Bill Somerville
8d3c86c399 Disallow multiple instances without a unique rig name
Because of confilicts using the  shared memory to communicate with jt9
only one instance of WSJT-X may run with each unique key (rig name).

Added a QLockFile for each unique  key in the temp directory and logic
to deal with stale locks and retries.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-03 16:07:43 +00:00
Bill Somerville
d4e55a093d Add local HTML help file to help menu.
So that a manual can be viewed without an Internet connection a second
manual action has been added to  the WSJT_X help menu. This shells out
to the default web browser with a local file target.

The build has been enhanced to install and package the current version
of the  HTML user manual  as downloaded from  the project web  site at
build time

The package  file locations have  been adjusted to be  compatible with
the QStandardPaths  class so that  its locate()  method can be  used to
portably access resources like this local help file

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 23:46:32 +00:00
Bill Somerville
4a32b0bef6 Add facility to disallow CAT commands while transmitting.
Some rigs either do not honour some CAT commands while transmitting or
interpret them  incorrectly. To  deal with this  a settings  option to
allow TX  frequency changes while  transmitting has been added  with a
default value of off.

Any UI actions that directly or indirectly change the TX frequency are
guarded according to this new option. As well as this band changes and
use of  the +2kHz check box  are disabled and guarded  respectively in
transmit mode.

Mode changes via the menu are now disabled while transmitting.

When TX frequency changes are allowed; frequency changes are correctly
implemented while in tune mode.

Double clicking  decodes while  transmitting now  correctly regenerate
and change the message sent on the fly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:19 +00:00
Bill Somerville
fbf58ae3f3 Make temp directory unique in test mode.
The Qt  test mode  that uses  special paths  for writeable  files (via
QtStandardPaths)  doesn't make  a special  temporary file  path.  This
change appends " - test_mode" to the WSJT-X unique temporary file path
so that an application run in test mode will not interact with another
running in normal mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4240 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-01 15:55:59 +00:00
Bill Somerville
a9e1a70092 Fix issue with non-modal window lifetimes.
Some non-modal help windows were not being automatically closed on
application exit.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-15 11:41:18 +00:00
Bill Somerville
5f95e16490 Only calculate revision once.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4024 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-14 10:42:11 +00:00
Bill Somerville
5b05f229a1 Try to form a consistent program title and revision specification from
all types of build.

CMake builds use 'svn info' (the git-svn equivalent is also supported)
to  get the  real latest  revision of  the workspace  that is  used to
source a  build. If the sources  are not in VCS  workspace (build from
source  snapshot  archive for  example)  then  the  $Rev$ svn  keyword
expansion in mainwindow.cpp is used despite its issues with accuracy.

Non-CMake builds use the $Rev$ keyword expansion where possible.

If a CMake  build is from a VCS workspace  with local modifications; a
'-dirty' suffix is added to the revision number to denote that.

If no revision number information can be found the word 'local' is
used as a revision number.

The revision  specification is used in  the WSJT-X "about"  box and is
sent  to PSKReporter.info  as part  of the  local  station information
(this     can     be     viewed     at     the     statistics     page
http://pskreporter.info/cgi-bin/pskstats.pl).

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4017 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-13 17:22:12 +00:00
Bill Somerville
d0dce856c0 Attempt to fix a few TX sequencing issues.
Simplified some of the TX logic and removed some redundant code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4014 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-11 22:50:44 +00:00
Bill Somerville
fc1713e9bf Simplify MainWindows to Modulator communications.
No longer any need to have a mute mechanism since the TX shutdown
mechanism is sufficient.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4012 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-11 22:50:22 +00:00