Joe Taylor
212e4a3c07
Add a timeout message for what will become v2.1.0-rc1.
2019-03-21 12:36:38 -04:00
Joe Taylor
ffb6d3624f
In FT4 mode, display only "for us" and Tx messages in right window.
2019-03-21 09:33:37 -04:00
Joe Taylor
3a6e26d645
Clean up the FT4 logic for setting status of labDXped, cbAutoSeq, cbFirst.
2019-03-14 12:03:07 -04:00
Joe Taylor
6a2effcfc6
In FT4 mode, Tx4 is now hardwired to the 'RR73' message.
2019-03-13 13:59:41 -04:00
Joe Taylor
e150d003d6
Fix an inforrect constant in ft4_rx() that skipped over first 0.208 s of Rx data.
2019-03-13 10:31:23 -04:00
Joe Taylor
e9a999cda1
Use the "TU; ..." message when starting another FT4 QSO almost right away.
2019-03-12 11:09:49 -04:00
Steve Franke
7a0823301a
Remove some temporary code.
2019-03-09 10:03:01 -06:00
Joe Taylor
69675153a7
FT4 sequencing seems OK now (but needs thorough testing). No "TU;" msgs yet.
2019-03-07 14:36:58 -05:00
Joe Taylor
87826d1a6c
Clean up some FT4 code.
2019-03-07 11:21:17 -05:00
Joe Taylor
ff0b6a03a4
Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2
2019-03-05 09:22:08 -05:00
Steve Franke
d7012267c0
CQ message type strings are now passed from mainwindow.cpp to ft4_decode.f90, to enable AP decoding of special CQ messages.
2019-03-04 17:10:57 -06:00
Joe Taylor
89cffbc959
Move the call to processMessage() to correct place in ft4Data().
2019-03-04 10:11:55 -05:00
Joe Taylor
871ff3892b
Use "CQ SCC ..." for Tx6 message if RTTY RU Exch = SCC.
2019-02-28 11:42:28 -05:00
Joe Taylor
6b5131ab5e
Trial changes to support messages for Slovenian Contest Club's RTTY-like contest.
2019-02-28 11:21:06 -05:00
Bill Somerville
278c544a6a
Merge branch 'develop' into feat-ft2
2019-02-26 11:52:14 +00:00
Steve Franke
fdca7c2dcb
Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2
2019-02-25 15:03:55 -06:00
Steve Franke
3759198982
Remove ramp-up and ramp-down symbols. Instead, shape the first 1/8th of first and last real symbols.
2019-02-25 15:03:43 -06:00
Joe Taylor
fdfb655b06
Option to select "Low sidelobes" or "Most sensitive" for waterfall spectra.
2019-02-25 15:04:05 -05:00
Bill Somerville
ad75db3e06
Merge tag 'wsjtx-2.0.1' into develop
...
WSJT-X v2.0.1 GA release
2019-02-25 03:15:56 +00:00
Bill Somerville
c60fbc11b6
Fix samples CMake script and update NEWS and copyright dates
...
Preparation for v2.0.1 GA release.
2019-02-25 03:07:51 +00:00
Bill Somerville
a12e71f352
Merge branch 'master' into develop
2019-02-25 00:44:58 +00:00
Joe Taylor
25bfa3798a
Transmit FT8 using a gaussian-filtered waveform.
2019-02-22 13:39:39 -05:00
Joe Taylor
aeddaeab9e
FT4 now transmits a waveform generated from Gaussian-filtered frequency changes.
2019-02-21 12:10:27 -05:00
Joe Taylor
57a20f838f
Remove the code that builds an ADIF file from FoxQSO.txt.
2019-02-21 10:24:58 -05:00
Joe Taylor
d5a1671210
FT4 decoding interval is now 288 ms. Saving of FT4 files is somewhat rationalized.
2019-02-21 10:08:18 -05:00
Bill Somerville
fd7bca080a
Revert to direct Log QSO invocation rather than deferred for Fox logging
...
Deferring using a 0mS timer does not work for Fox logging as it may be
invoked more than once in a loop when multiple streams are
active. This change directly calls the logging member function(s)
inside the message processing loop.
This change was initially made because an unhelpful database query
order along with a need to display the latest logged QSO at the bottom
of the Fox log table view was causing GUI unresponsiveness when the
Fox log table had many rows. The current implementation shows the Fox
log table view in descending time order with the latest logged QSO at
the top which avoids this unresponsiveness issue (tested with a Fox
log table with over 15,000 rows).
2019-02-20 19:40:36 +00:00
Joe Taylor
f1e7b0c30a
Add (temporary?) code for converting FoxQSO.txt to an ADIF log.
2019-02-20 10:43:30 -05:00
Joe Taylor
c2cb55a68a
Reduce FT4 chunk size fro 500 to 288 ms; suppress duplicate decodes from close to chunk ends.
2019-02-13 14:42:57 -05:00
Bill Somerville
8a1ff9e1a3
Reset QSO start time when aborting a QSO or clearing messages (ESC and F4)
2019-02-13 18:47:31 +00:00
Steve Franke
cbfcb76193
AP decoding basically works. Make data_dir setting work on the Mac.
2019-02-07 18:48:38 -06:00
Steve Franke
71cb6d9f50
Use 4 different Costas arrays to prevent false syncs as received frames move
...
through the analysis window.
Add a random 77-bit vector to each message so that tone transitions occur
even if the message contains a long string of 0 or 1 (like a CQ).
Add alternative sync calculation as an option (sync2), for testing.
Add basic framework for AP decoding.
2019-02-05 19:18:50 -06:00
Bill Somerville
4dfc4685e9
Make the UDP protocol Clear (3) message two-way
...
External servers can clear either or both of the Band Activity and Rx
Frequency decodes windows. This was requested by Dave, AA6YQ, so that
DX Lab Suite applications can clear old decodes on band changes to
ensure that decode highlighing is consistent.
2019-02-03 00:49:35 +00:00
Bill Somerville
846918e3aa
Remove normal mouse double-click action for decode display windows
...
The normal action selects the word under the mouse pointer and this
disrupts callsign highlighting. Normal single-click selection
behaviour is unchanged so text can still be selected using the mouse
and copied if desired.
2019-02-02 20:38:56 +00:00
Joe Taylor
22209030e2
Move files all_ft4.txt and clockit.out to the data_dir directory.
2019-02-01 11:56:08 -05:00
Joe Taylor
04f085bb24
Proper handling of multiple decodes from one call to ft4_decode.
2019-01-31 13:55:21 -05:00
Joe Taylor
a80b955fe7
Decode FT4 over the full frequency range displayed in waterfall.
2019-01-31 12:10:58 -05:00
Joe Taylor
a7ded94313
Saved FT4 files must be at least 5 s long; Shift+F6 now works for FT4 files.
2019-01-29 15:24:08 -05:00
Joe Taylor
e11acde9fb
Better handling of calls to ft4_decode(), depending on ring-buffer pointer.
2019-01-29 14:19:22 -05:00
Joe Taylor
3ab7c1edf6
Don't logQSO or transmit in response to a decode from disk.
2019-01-29 13:19:36 -05:00
Joe Taylor
65398bbffa
Fix the UTC display on waterfall, for FT4 mode.
2019-01-29 12:12:54 -05:00
Joe Taylor
6d6e2e8314
Don't try to transmit a blank FT4 message!
2019-01-29 11:49:11 -05:00
Joe Taylor
e98231d4c1
Correct the call to genft4(); fix the displayed time for data from disk.
2019-01-29 10:39:34 -05:00
Joe Taylor
7a9240c9ef
Basic saving of .wav files for FT4.
2019-01-28 15:58:14 -05:00
Joe Taylor
d5203e2da9
Code cleanup.
2019-01-28 14:20:32 -05:00
Joe Taylor
2e4035c8bb
Insert red line on waterfall to mark an FT4 transmission.
2019-01-28 13:50:23 -05:00
Joe Taylor
7da4fc63a6
Add freq markers for FT4 to Wide Graph. Tentative default FT4 freqs for 40m and 20m.
2019-01-28 11:07:52 -05:00
Joe Taylor
6e4f0f32ee
Remove FT2; implement basic functionality in FT4.
2019-01-28 10:19:46 -05:00
Joe Taylor
f6e3dbb8e9
Increase the FT2 Tx duration timer from 2200 to 2500 ms.
2019-01-25 16:52:38 -05:00
Joe Taylor
a0ddc1485e
Make the ProgressBar invisible in FT2 mode.
2019-01-24 17:29:03 -05:00
Joe Taylor
edf4af5307
Be sure to set start time of QSO.
2019-01-24 15:58:08 -05:00
