Commit Graph

1075 Commits

Author SHA1 Message Date
Steven Franke
1135c33f33 Remove an obsolete file.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7503 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 20:43:11 +00:00
Steven Franke
f0e7bf8033 Only train on DX Call when Rx Equalization is checked.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7502 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 18:39:18 +00:00
Steven Franke
5fb051e3cb Never apply dynamic phase coeffs. Measure phase response for DX Call and write coeffs, as before. Rx Equalization is still hardwired for K9AN's TS2000.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7501 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 18:25:54 +00:00
Steven Franke
1b1aa99a68 Improve accuracy of frequency estimate for non-fading, phase-stable, high-SNR signals.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7484 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-12 03:48:18 +00:00
Joe Taylor
edef3bc39e Use a sin^2 window on FFT in freqcal. Fix the table header for fcal.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7472 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-10 14:51:32 +00:00
Bill Somerville
b43567c38c Deal with the FreqCal edge case of FTol>DF
Reduce the tolerance to +-DF in this case to avoid array bounds error.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 22:54:47 +00:00
Joe Taylor
6016f03523 Add the "FMT" tools; remove unnecessary references to calibration station callsigns.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7467 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 15:55:42 +00:00
Steven Franke
59d1ee3d62 Define and init callsign in freqcal.f90. Perhaps it should be removed altogether.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7461 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-07 17:06:13 +00:00
Steven Franke
da6c0c246e Disallow Sh message decodes with nrxrpt .le. 6.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7460 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 20:53:50 +00:00
Joe Taylor
2698fc02c6 Re Sh and SWL: allow either or neither, but not both.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7459 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 19:01:29 +00:00
Joe Taylor
ab8c93dca9 Fix a problem in msk144spd that caused some flaky behavior.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7458 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 18:28:26 +00:00
Joe Taylor
9866400c1b Minor code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 22:45:36 +00:00
Joe Taylor
62f5447520 First usable-at-K1JT version of a semi-automated Frequency Calibration routine.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7452 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 20:20:43 +00:00
Joe Taylor
6d64eaa37b More work on FreqCal mode. Some of this code is temporary!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7451 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 18:35:26 +00:00
Steven Franke
fcaff0b9d1 Tuning NSHMEM - number of Sh/SWL decodes to remember and test against.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7450 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 03:35:33 +00:00
Steven Franke
c47403642e More progress on SWL mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7449 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 02:26:55 +00:00
Joe Taylor
6d3ca346e0 Further progress toward a usable "FreqCal" (Frequency Calibration) mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7448 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 19:07:35 +00:00
Steven Franke
838555c08c Tweaks to reject certain types of spurious decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7447 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 01:16:19 +00:00
Steven Franke
47f782dbe3 Improve SWL mode performance.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7445 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 20:55:10 +00:00
Steven Franke
8607f261ce Make msk144d2 -e (Eve mode) option work.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7443 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-02 20:13:47 +00:00
Joe Taylor
a65ebafd48 1. We did the experiment: users clearly prefer a "Prompt to log QSO"
only when 73 is sent.  Revert to that well-established behavior.
2. Correct the logic that detects short-form RO, RRR, and 73 messages in
JT65 VHF modes and color-highlights the Tx message box.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7442 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-02 14:22:29 +00:00
Steven Franke
9582ccd5d5 Lower SWL SNR thresholds by one notch. Note that the xsnr that is compared to the threshold is the nonlinear snr from squared signal spectrum, not 'real' snr.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7441 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-02 03:56:29 +00:00
Steven Franke
1c8cca7f85 Only print SWL-mode decodes if SNR is high enough. Needs tuning - thresholds may be set too high.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7440 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 22:15:29 +00:00
Steven Franke
cb8f74584d Print <nhash> in SWL mode if decoded hash doesn't match an entry in the hasharray.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7439 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 18:50:21 +00:00
Steven Franke
b166ead858 Tweak.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7438 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 16:45:47 +00:00
Steven Franke
b8cc894a57 More progress on SWL mode. Needs testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7437 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 16:34:20 +00:00
Steven Franke
b8e7339e88 Bring the command-line MSK144 decoder up-to-date.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7436 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-31 02:57:20 +00:00
Steven Franke
077ac1d77b Progress toward SWL capability. Not finished and not tested.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7434 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-31 02:05:51 +00:00
Steven Franke
2c2d31ea8d Remove some dead code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7432 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 20:26:59 +00:00
Steven Franke
9c3b30d927 Fix a bug in analytic.f90 and enable amplitude flattening. This version is not intended for general use on MSK144 as it uses hardwired coefficients derived for use with a specific radio.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7428 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-29 01:52:55 +00:00
Steven Franke
5ba225f0af Decrease number of frames that must be averaged for valid dynamic equalization.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7427 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-27 14:30:00 +00:00
Joe Taylor
d2fb561f10 Add "Clear reference spectrum" to the File menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7426 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-24 20:05:28 +00:00
Joe Taylor
df35f519df 1. As a test, zap any data at start if id2() that appears to be a T/R transient.
2. Send emedelay (now 0 or 2.5) to QRA64 decoder.
3. Tweaks to sync64, making it better for QRA64A.
4. Mainwindow MessageBox if it attempts to open a file with wrong format.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 20:51:27 +00:00
Steven Franke
873d481458 Add -r (Rx Equalize) option to command-line MSK144 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7423 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 18:17:23 +00:00
Steven Franke
353c2bb4c3 Tweaks.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7422 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:36:03 +00:00
Steven Franke
02a4cb95a4 Add an option on advanced time to enable MSK144 Rx filter equalizer. Other changes necessary to accommodate coexistence of static (Rx Filter) and dynamic (QSO partner-dependent) phase corrections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7421 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:21:23 +00:00
Joe Taylor
a92f9c3cc1 Add code to make wsprcode functional. (NB: most of these routines are otherwise
obsolete; they come from WSPR 2.0, etc.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7417 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 18:50:18 +00:00
Steven Franke
4c7fd5d5c0 Define a default mygrid in the command line MSK144 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7416 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 16:04:08 +00:00
Joe Taylor
ec7e099cf8 Further adjustments to sync64; extend QRA64 data length to 54 s; some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7414 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:27:23 +00:00
Joe Taylor
c3b52ab787 Remove the QRA64 test on sync2 -- it was not helpful.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7413 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 14:09:45 +00:00
Steven Franke
e4c5811ac3 Changes needed to accommodate channel equalization implemented in the new msk144signalquality.f90. Warning - msk144signalquality writes to the executable directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7412 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 03:01:43 +00:00
Steven Franke
f9e6c89847 Calculates # of bit errors and eye-opening on every call, estimates channel phase on startup and whenever DX Call changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7411 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 02:53:57 +00:00
Steven Franke
c1a0fe3d27 Make the command-line MSK144 decoder work again.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7410 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 02:49:22 +00:00
Joe Taylor
d9f120c967 I was too strict on the sync2 and width limits. This is much better for QRA64E!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7407 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-19 20:14:31 +00:00
Joe Taylor
3220578bc4 In MSK144, if a received grid is not in one's own hemisphere display it
as "R grid2", where grids2 is the antipodes -- even if the receiver is
not in Contest mode.  This seems safe enough...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7396 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 02:54:23 +00:00
Joe Taylor
1fe6c4e375 Make Contest Mode messages properly readable by anyone in the sender's
hemisphere.  Add Contest Mode info to User Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7395 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 02:46:04 +00:00
Joe Taylor
33af88a41b Complete the implementation of MSK144 contest mode. Needs testing!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7393 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 21:18:47 +00:00
Steven Franke
794e6ada00 Fix a wsprd bug that was introduced in r7090, which attempted to fix encoding of callsigns like 5N/6O0O.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7391 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 06:41:07 +00:00
Bill Somerville
74bfc17ebd Fix WSPR c2 file writing
Inverted error check skipped writing of the contents.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7390 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 00:06:22 +00:00
Joe Taylor
f7935361b3 Install G3WDG changes to make jt4sim use the same fast fading model as qra64sim.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7388 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 18:51:53 +00:00