memory region smaller by some 150 MB.)
2. Some code cleanup (removing unused lstrong, etc.)...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Re-establish the pxdb measurement for Thermo.
3. Double-click on decoded line copies it to QSO window (unless it's
already there).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
is now a button. It is enabled only when Orange, which means CAT
control is essentially Program to Radio only. Clicking the button
causes a one-time read of the radio's dial frequency.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3256 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
I have changed the declarations of the Rig class functions we use:
open()
setConf()
getFreq()
setFreq()
setPTT()
close()
... so that each one returns the (negative) error code returned by
hamlib. These functions no longer throw exceptions.
Initial tests seem to show things working well. I have found one
condition that causes a crash. The rig is initially opened and is
running OK (in this case, with the Polling interval set to 1 s). Then
the radio is turned off. The next call to getFreq() never returns.
Probably we need to set a timeout limit?
The code is kinda on the quick-and-dirty side. Improvements will be
welcom!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3246 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Rationalize tab-order on main window.
3. Tweak the GUI appearance around DxCall, DxGrid. (Hope it's still OK
in Linux!
4. Add helpful displays of Keyboard Shortcuts (F3) and Special Mouse
Commands (F4).
5. Bump version number to 0.95.
6. Update the Windows packaging script.
7. Update ChangeLog in preparation for possible release of v0.95 r3226.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3226 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
functions.
2. Restored "Test CAT Control" and "Test PTT" buttons on the
Setup | Configuration screen.
These features need thorough testing!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3204 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
*** This code is not finished, and may not work correctly! ***
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3200 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. New Setup options: "Tx disabled after sending 73" and "Runaway Tx watchdog".
3. Keyboard shortcuts:
Alt-D: decode again at QSO frequency (same as Decode() button)
Shift-D: full decode again, both windows
Alt-E: Erase()
Ctrl-F: Edit free text message
Alt-H: Halt Tx()
Alt M: Monitor()
Alt-N: Enable Tx()
Alt-Q: Log QSO
Alt-S: Stop()
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3155 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
1. The "WSJT Traditional" setof six line-edit fields, radio buttons,
and Tx# buttons;
2. New configuration with buttons that generate each message for the
standard minimum QSO, one at a time.
NB: the logic for these buttons is not yet complete.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Adjusted mainwindow layout.
3. Added label at top level of decoded text widgets.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
for everything else.
NB: I have screwed up the vertical expansion of mainwindow: growth occurs
at the bottom, rather than in the text boxes. Help!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3129 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Option to display distance in miles.
Remove (or reduce?) negative red spikes at start of Rx period.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3128 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. "CQ DX" is now treated properly when the decoded line is double.clicked.
3. Displayed sync values reduced by 1/2.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3124 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Clear DXCall and DXGrid boxes after logging a QSO.
Add instruction at top of "confirm LogQSO" screen; increase font size on
its labels.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Add a tab for Default Frequencies on Setup window.
3. Update Makefile.MinGW
4. Bump version number to 0.8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Signal reports 0 dB and above now displayed as "+03", "+16", etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Changed "Tx = QSO Freq" button to a band-change ComboBox.
Rig control of frequency setting and T/R now works on TS-2000.
T/R sequencing is not yet correct, but I thimnk it still works OK in the
DTR/RTS switching mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3083 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
and run with PTT control via DTR/RTS.
Will need to replace a "labAzDist" label in mainwindow.ui.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3080 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Decoding now starts at t=50 s rather than t=52 s.
3. Label on "Auto is On/Off" button changed to "Enable Tx".
4. Three new options on the Setup menu, to help importing ADIF log into some
fussy loggers:
- Log HT9 without submode
- Convert JT9-x to RTTY for logging
- Log dB reports to Comments
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3077 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Tx macros are now enabled.
Bug in decoder fixed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Double-click on decoded line copies valid grid to dxGrid box.
Add button workd with an empty call3.txt file.
QSO start/stop times rationalized (somewhat).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Change "double-click on callsign" so that you can click anywhere on the line,
and make it set TxFreq accordingly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3025 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some code cleanup; remove unused code.
Add sub-mode number to wsjtx_rx.log.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2767 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Include # channels in audio device offerings.
Start implementing "msgsent" correctly. (Not finished!)
Include Date in UTC display.
Use the properly computer snrdb.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2718 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Double-click on waterfall sets Tol to a reduced (mode-dependent) value.
Tol is saved/restored on program restart.
Added digital gain slider for setting input level.
Garbage decode "15P6715P67WCV" is rejected.
Arrays ss and c0 are copied and saved when newdat=1. Further processing is
done on the copies.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2712 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Improve the way pctile gets an estimate of array median.
Put info for mettab() into a data statement.
Attempt decoding near all freqs that give sync >= 1.0
Remove killbyname
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2707 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Disable some presently un-implemented controls.
Begin implemnting "Save Synced" and "Save Decoded".
Set compilation to CONSOLE mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2706 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Move the ptt function into the Qt-managed code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2699 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
request fails. Then 3rd one is OK, 4th fails, etc., etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2669 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
displayed range to 1000 Hz.) Noise blanking may be working -- needs
tests. Tx has been implemented.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2648 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
the JTMS of WSJT9. Modulation changed to BPSK, speed increased
from 1378.125 to 2000 baud.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/jtms3@2505 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
those of MAP65. Have removed the Astro, BandMap, and Messages windows.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/jtms3@2475 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
MAP65 v2.3.0, r631, as checked out from the SVN repository on
pulsar.princeton.edu. If all goes well with this commit, subsequent
MAP65 development will use the Berlios repository.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/map65@2461 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
