w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-06 09:21:18 -05:00
Code Issues Packages Projects Releases Wiki Activity
9,220 Commits 5 Branches 98 Tags 208 MiB
16d97aad3b
Commit Graph

753 Commits

Author SHA1 Message Date
Joe Taylor
3068f0c61f Use genwave() to create Q65 audio signal. Send "include averaging" flag to Q65 decoder. 2020-11-11 11:14:02 -05:00
Bill Somerville
de0af5a2ed
Merge branch 'feat-outgoing-udp-interface' into develop 2020-11-10 20:09:48 +00:00
Bill Somerville
ab780a324a
Testing options 
Two new environment variables to control special testing behaviour:

    * WSJT_TX_BOTH - set to "1" to force transmission on both periods.

    * WSJT_REVERSE_DOPPLER - set to "1" to transpose Tx and Rx Doppler
      corrections. Use this to test Doppler tracking on a terrestrial
      link.
 2020-11-06 18:28:59 +00:00
Bill Somerville
caa23f1101
Message Client allows sending multicast UDP on multiple interfaces 2020-11-05 03:37:01 +00:00
Joe Taylor
860b0ce21e Include TRperiod in the Q65 status bar label. 2020-11-03 15:49:24 -05:00
Bill Somerville
430d57c1ca
Network interface selection for outgoing UDP multicast datagrams 
Default  selection  is  the  loop-back interface.  Users  who  require
interoperation  between  WSJT-X   instances  cooperating  applications
running on different hosts should  select a suitable network interface
and  carefully choose  a multicast  group address,  and TTL,  that has
minimal scope covering the necessary  network(s). Using 224.0.0.1 is a
reasonable    strategy    if   all    hosts    are    on   the    same
subnet. Administratively  scoped multicast group addresses  like those
within 239.255.0.0/16  can cover larger  boundaries, but care  must be
taken if the local subnet has access to a multicast enabled router.

The  IPv4  broadcast  address  (255.255.255.255) may  be  used  as  an
alternative  to multicast  UDP, but  note that  WSJT-X will  only send
broadcast UDP datagrams  on the loop-back interface,  so all recipient
applications must be running on the same host system.

The reference UDP Message protocol  applications are being extended to
be configurable  with a list of  interfaces to join a  multicast group
address on. By default they will only join on the loop-back interface,
which is also  recommended for any applications designed  to take part
in the WSJT-X  UDP Message Protocol. This allows full  user control of
the  scope of  multicast  group membership  with  a very  conservative
default  mode  that will  work  with  all interoperating  applications
running on the same host system.
 2020-11-02 15:33:44 +00:00
Joe Taylor
20b6d65c61 Allow WSJT-X to generate the new Q65 code. Loopback Q65 QSOs now work. 2020-10-28 12:04:43 -04:00
Joe Taylor
ef2c63af29 Enable some changes for Q65 submodes F, G, H. (They won't decode without additions to the core Q65 decoder.) 2020-10-25 15:44:52 -04:00
Joe Taylor
7a22e6a2e1 Change the Q65 value of nsps from 7680 to 7200. 2020-10-25 14:10:38 -04:00
Joe Taylor
9b452e8f99 Change mode name QRA65 to Q65 everywhere, supposedly. 2020-10-25 13:58:18 -04:00
Joe Taylor
b68ccee2fa Correct a flaw in assigning bin numbers for in sync64(), fixing QRA65 submodes B C D E. 2020-10-22 14:05:20 -04:00
Bill Somerville
c444cb2409
Merge branch 'release-2.3.0' into develop 2020-10-21 13:37:37 +01:00
Bill Somerville
2a2e120d7c
Repair invalid string references 2020-10-21 13:09:10 +01:00
Bill Somerville
ccb7a1adf5
Repair defect with response to UDP Reply(4) messages with AP markers 2020-10-18 02:11:04 +01:00
Bill Somerville
8d088cf4f5
Repair defect with response to UDP Reply(4) messages with AP markers 2020-10-18 02:09:17 +01:00
Bill Somerville
40ac1f2e41
Merge branch 'develop' into feat-boost-log 2020-10-14 21:02:00 +01:00
Bill Somerville
c50133bcfc
Honour "Settings->General->Disable Tx after sending 73" if not auto-sequencing 2020-10-14 21:01:05 +01:00
Bill Somerville
62e089aecf
Honour "Settings->General->Disable Tx after sending 73" if not auto-sequencing 2020-10-14 20:59:32 +01:00
Bill Somerville
d8b16b31f4
Merge branch 'develop' into feat-boost-log 2020-10-13 19:20:37 +01:00
Bill Somerville
90b3fa2a46
Merge branch 'release-2.3.0' into develop 2020-10-13 16:51:40 +01:00
Bill Somerville
518207da3b
Various updates to UDP Message Protocol handling for FST4W 
Corresponding updates to the message_aggregator reference application.
 2020-10-13 16:46:38 +01:00
Bill Somerville
ed92d0811a
Implement "No own decodes" functionality for FST4W mode 2020-10-10 13:18:04 +01:00
Bill Somerville
bb8e6ea64a
Missed merge from develop branch conflict resolved 2020-10-06 19:55:43 +01:00
Bill Somerville
314be8ccb7
Merge branch 'develop' into feat-fst280 2020-10-06 19:25:06 +01:00
Bill Somerville
6e75a62811
Correct mode switching for QRA64 and QRA65 2020-10-06 18:38:18 +01:00
Joe Taylor
db1a24f1d4 Update WideGraph parameters when entering QRA64 mode. 2020-10-06 11:07:08 -04:00
Joe Taylor
c17acdb447 Activate Fast and Normal decode options for QRA64. 2020-10-05 09:48:44 -04:00
Bill Somerville
522000cfab
Added SWL Mode to View menu 
SWL mode  hides all lower  panel widgets,  maximizing the size  of the
decodes windows.  Designed for operators running  several instances to
monitor multiple bands and modes.
 2020-10-04 23:05:17 +01:00
Bill Somerville
f8e5903f83
Merge branch 'develop' into feat-boost-log 2020-10-04 22:47:01 +01:00
Bill Somerville
add63fb374
Adapt WSPRnet.org spotting to moveable Rx analysis window 
This allows spots at any frequency to be posted rather than just those
in the 1400 to 1600 Hz range above the VFO dial frequency.
 2020-10-04 22:41:52 +01:00
Joe Taylor
df034cf9b5 Don't set TxFreq and RxFreq defaults on QRA64 startup. 2020-10-04 16:10:44 -04:00
Bill Somerville
a169b5daf8
Added SWL Mode to View menu 
SWL mode  hides all lower  panel widgets,  maximizing the size  of the
decodes windows.  Designed for operators running  several instances to
monitor multiple bands and modes.
 2020-10-04 00:46:59 +01:00
Bill Somerville
837821b117
Merge branch 'develop' into feat-boost-log 2020-10-01 19:55:53 +01:00
Bill Somerville
0c0adbdaab
Fix widget foreground when forcing the background colour 
This is  required so as  to maintain good contrast  between foreground
and background  elements when  the widget  colour palette  is changed,
e.g. when using a lights out style sheet.
 2020-10-01 12:58:09 +01:00
Joe Taylor
9200c3e27a Add NB = -3% option to cycle through NB=0, 1, 2, 3, ... 20%. 2020-09-30 13:32:03 -04:00
Joe Taylor
b56ce23f38 Implement optional x2/x4 tone spacings for FST4 and FST4W. 2020-09-30 10:01:57 -04:00
Joe Taylor
541c1ddea6 Fix the problem of FST4W transmitting on the FST4 TxFreq after mode switch. 2020-09-30 09:37:15 -04:00
Joe Taylor
b99aafa336 On change of TxFreq during an FST4 transmission, regenerate the Tx waveform and restart. 2020-09-29 13:00:57 -04:00
Bill Somerville
6f7d1e9968
Merge branch 'release-2.3.0' into develop 2020-09-29 12:34:39 +01:00
Bill Somerville
204d63929d
Repair a regression with odd/2nd period FT4 decode timestamps 
Generalized slow mode decode timestamp generation to a common routine.
 2020-09-29 12:32:47 +01:00
Bill Somerville
7a56acfe35
Merge branch 'develop' into feat-boost-log 2020-09-27 01:45:29 +01:00
Bill Somerville
1ae96dc672
Disable RC nag message 2020-09-27 00:42:25 +01:00
Bill Somerville
7f22d3c5a6
Merge branch 'develop' into feat-boost-log 2020-09-27 00:30:32 +01:00
Joe Taylor
c3d8e4dd73 Working on QRA65, including simulator and test program. 2020-09-26 16:49:06 -04:00
Bill Somerville
24b9da7c1b
Enable RC nag message and time limit 2020-09-26 21:09:45 +01:00
Joe Taylor
acd6253373 A few more fixups for QRA65. Not finished, yet! 2020-09-25 15:38:20 -04:00
Joe Taylor
7fd2f1afe6 Change QRA66 to QRA65, on the C++ side. 2020-09-25 13:20:46 -04:00
Bill Somerville
e50e712fdd
Start using class NonInheritingProcess 2020-09-24 17:57:06 +01:00
Joe Taylor
dd296311cc Disable TxFreqSpinBox, not RxFreqSpinBox if QSY during transmit is not allowed. 2020-09-22 11:25:59 -04:00
Joe Taylor
9fe2fc6de0 Fix two problems: sometime incorrect setting of RxFreq in WideGraph, and incorrect timestamp for FST4W-120 and FST4W-300 decodes in ALL.TXT. 2020-09-21 14:35:16 -04:00
Bill Somerville
542ffe8311
Improve audio device handling and error recovery 
where possible  audio devices that  disappear are not  forgotten until
the user selects another device, this should allow temporarily missing
devices or forgetting  to switch on devices before  starting WSJT-X to
be  handled more  cleanly. If  all else  fails, visiting  the Settings
dialog and  clicking OK should  get things  going again. Note  that we
still  do not  have  a  reliable way  of  detecting  failed audio  out
devices, in that  case selecting another device and  then returning to
the original should work.

Enumerating  audio devices  is expensive  and on  Linux may  take many
seconds per  device. To avoid  lengthy blocking behaviour until  it is
absolutely necessary,  audio devices are  not enumerated until  one of
the "Settings->Audio" device drop-down lists is opened. Elsewhere when
devices  must be  discovered  the  enumeration stops  as  soon as  the
configured device is  discovered. A status bar message  is posted when
audio devices are being enumerated as a reminder that the UI may block
while this is happening.

The message box warning about  unaccounted-for input audio samples now
only triggers when  >5 seconds of audio appears to  be missing or over
provided. Hopefully this will make the warning less annoying for those
that are  using audio sources  with high and/or variable  latencies. A
status  bar message  is still  posted for  any amount  of audio  input
samples  unaccounted for  >1/5 second,  this message  appearing a  lot
should be considered as notification that  there is a problem with the
audio sub-system, system load is  too high, or time synchronization is
stepping the PC clock rather  than adjusting the frequency to maintain
monotonic clock ticks.
 2020-09-20 18:20:16 +01:00
Joe Taylor
1ab59a8d6b Fully configure WideGpahe after switching to JT65 mode. 2020-09-20 10:17:27 -04:00
Joe Taylor
327808a0bb One more try at fixing the Fmax() startup problem that Steve sees. 2020-09-18 13:33:30 -04:00
Joe Taylor
52bdd57e57 Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value. 2020-09-18 11:30:23 -04:00
Joe Taylor
41aa5dae74 Make the FTol control invisible in FST4 if Single decode is not checked. 2020-09-17 12:58:59 -04:00
Joe Taylor
e60fc1ca19 FST4 GUI controls for FLow, FHigh, should disappear when Single Decode is checked. And some related improvements. 2020-09-16 20:16:32 -04:00
Joe Taylor
21dc6a5c59 Connect the FLow and FHigh limits for FST4 decoding. 2020-09-16 17:23:59 -04:00
Joe Taylor
2266e8dbb7 Add FLow and FHigh spinner controls to set the FST4 decoding range. 2020-09-16 17:02:40 -04:00
Bill Somerville
abe470b24a
Fix a typo 2020-09-15 15:53:14 +01:00
Bill Somerville
e4eb6eb94e
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-15 10:31:04 +01:00
Joe Taylor
3886411fad Two more corrections to mode-switch settings of GUI controls in FST4/FST4W. 2020-09-14 13:55:30 -04:00
Joe Taylor
f20c45c167 FST4: Align WideGraph green bar with RxFreq on startup. CTRL-diouble-click on waterfall sets FTol=10 and calls decoder. 2020-09-14 10:56:54 -04:00
Joe Taylor
8f554321c8 Make sure that Tx audio frequency in FST4 mode comes from FST4 TxFreq spinner, not the WSPR/FST4W spinner. 2020-09-14 09:55:33 -04:00
Bill Somerville
5014c62bfa
Notify user when enumerating audio devices 2020-09-13 17:12:11 +01:00
Joe Taylor
39403c2520 Expand the range of allowable values for TxFreq in FST4W. 2020-09-13 09:38:39 -04:00
Joe Taylor
174893395b Ensure sending correct FTol value from GUI to decoder for FST4. 2020-09-12 09:54:13 -04:00
Joe Taylor
bcdaf395f1 Must set m_bFastMode=false for FST4. Fixes the reported "Hold Tx frequency" issue. Also, ensure display of WideGraph rather than FastGraph for FST4, FST4W. 2020-09-12 09:35:32 -04:00
Bill Somerville
66e887b2f9
Merge branch 'develop' into feat-dropped-frames 2020-09-12 00:19:04 +01:00
Bill Somerville
5fdcd8c15a
Merge branch 'develop' into feat-fst280 2020-09-11 20:06:20 +01:00
Joe Taylor
2a1ef287a6 Add 300 and 400 Hz to the list of available FTol values for FST4. 2020-09-11 09:13:11 -04:00
Joe Taylor
e23f7b3434 Don't round off the FST4W RxFreq when FTol is changed. That was a bad idea. 2020-09-10 13:48:08 -04:00
Joe Taylor
b6f990fac2 Allow FTol values down to 1 Hz; let maximum FTol values for FST4 depend on TRperiod. 2020-09-10 13:33:33 -04:00
Bill Somerville
ae4cfaf1ae
Start Fox mode on correct tab of tab widget 2020-09-08 21:19:48 +01:00
Bill Somerville
db6a432a33
Ensure band/frequency combo box edit styling tracks current frequency 2020-09-08 15:24:55 +01:00
Bill Somerville
1d52daf7ee
Remove erroneous Qt emit keywords 2020-09-08 12:54:19 +01:00
Joe Taylor
72cffc9da4 Make the FST4/FST4W Quick-Start Guide available from the Help menu. 2020-09-06 13:31:19 -04:00
Joe Taylor
4ab8780dd8 Code cleanyup associated with removing Tab 2. 2020-09-05 15:22:18 -04:00
Joe Taylor
7aeb9d5e2e Remove the "Tab 2" option for generating Tx messages. 2020-09-05 15:11:32 -04:00
Joe Taylor
403d3a1041 Make "double-click on call" work in FST4 as in oter modes. 2020-09-05 14:09:33 -04:00
Joe Taylor
844fe26368 Fix "on_actionFST4_triggered()" so that it does not call another mode setup routine. 2020-09-05 11:53:23 -04:00
Joe Taylor
c1025b7c4c Allow user to set center frequency and FTol in FST4W mode. Needs more testing! 2020-09-05 10:34:55 -04:00
Joe Taylor
02928787b1 Save and restore the current setting of the FST4W RoundRobin control. 2020-09-04 15:38:04 -04:00
Joe Taylor
f24d15b16e Eliminate the FST4/FST4W submodes with hmod > 1. 2020-09-04 15:15:30 -04:00
Bill Somerville
a623ed0baf
Ensure band/frequency combo box edit shows correct band 2020-09-02 21:08:25 +01:00
Bill Somerville
56741d5e10
Merge branch 'develop' into feat-dropped-frames 2020-08-29 14:05:52 +01:00
Bill Somerville
64f29318aa
Repair an auto-sequencing defect with UDP Reply message handling 2020-08-29 14:04:29 +01:00
Bill Somerville
3a71184040
Include period start time in dropped samples message box details 2020-08-22 18:12:12 +01:00
Bill Somerville
d1860df190
Only send local station info to PSK Reporter when necessary 
Remove unneeded debug trace messages.
 2020-08-18 12:47:17 +01:00
Bill Somerville
4a2a181528
Merge branch 'develop' into feat-fst280 2020-08-17 18:33:00 +01:00
Bill Somerville
b1c53bc332
Fix a cosmetic FT6 DXpedition mode Hound issue that causes an assert 2020-08-17 01:52:47 +01:00
Bill Somerville
536e6568a6
FST4* messages do not need padding out to 37 characters 2020-08-16 02:34:18 +01:00
Bill Somerville
50da40413f
PSK Reporter connection opened & closed at the correct times 2020-08-16 00:38:19 +01:00
Bill Somerville
491a7b9a05
Ensure no connect with, or traffic to, PSK Reporter if not enabled 2020-08-15 23:32:10 +01:00
Bill Somerville
b984390711
Fix PSK Reporter spots of FST4W decodes with power <10 dBm 2020-08-15 23:29:53 +01:00
Bill Somerville
632e2c2ae9
Merge branch 'develop' into feat-dropped-frames 2020-08-15 20:03:47 +01:00
Joe Taylor
dad9199f24 Disable double-clicking on an FST4W decode. It serves no useful purpose. 2020-08-15 14:31:18 -04:00
Bill Somerville
ec623deb9f
More consistent Tx Next button behaviour 2020-08-15 15:57:29 +01:00
Bill Somerville
e17ad223ae
Tx Next button enables automatic Tx 
Also a  number of WSPR/FST4W  code clean-ups including getting  the Tx
Next button to function as intended.
 2020-08-15 02:57:23 +01:00
Bill Somerville
7eb229ecde
Reduce Tx audio buffer size improve Pwr control granularity 2020-08-13 10:31:23 +01:00
Bill Somerville
11abe7c60f
Cosmetic reformating 2020-08-13 10:30:49 +01:00
Bill Somerville
185f570136
Avoid accessing shared memory after it has been deleted 2020-08-11 20:07:00 +01:00
Bill Somerville
e27b09b590
Revert Tx status widget on status bar to non-permanent placement 2020-08-11 16:09:51 +01:00
Bill Somerville
8e37dbd8c1
Increased threshold for status message and warning on dropped frames 2020-08-11 16:08:21 +01:00
Bill Somerville
0cf14dfcc9
Remove user adjustable audio buffer sizes from Settings 
Fixed buffer sizes are  used. Rx use s 3456 x 1st  downsample rate x 5
audio  frames  of  buffer  space.  On Windows  this  means  that  each
chunk (periodSize())  delivered from the  audio stream is  our initial
DSP processing chunk size, thus  matching audio buffer latency exactly
with WSJT-X's  own front  end latency. This  should result  in optimal
resilience to high system loads that might starve the soundcard ADC of
buffers to fill and case dropped audio frames.

For Tx  a buffer sufficient for  1 s of  audio is used at  present, on
Windows  the period  size will  be  set to  1/40 of  that which  gives
reasonably low latency  and plenty of resilience to  high system loads
that might  starve the soundcard DAC  of audio frames to  render. Note
that a 1 s  buffer will make the "Pwr" slider slow  to respond, we may
have to reduce the Tx audio buffer size if this is seen as a problem.
 2020-08-11 13:48:01 +01:00
Bill Somerville
1892f39df3
Revert "TEMPORARY: Diagnostic routine for the "Save All" missing files problem." 
This reverts commit b5765401dc.
 2020-08-10 01:42:26 +01:00
Joe Taylor
b5765401dc
TEMPORARY: Diagnostic routine for the "Save All" missing files problem. 2020-08-09 22:50:17 +01:00
Joe Taylor
07f63cdb63 Small adjustment to make file names for QRA66-30 modes correct. 2020-08-09 15:48:56 -04:00
Joe Taylor
42626009b5 TEMPORARY: Diagnostic routine for the "Save All" missing files problem. 2020-08-09 14:21:25 -04:00
Bill Somerville
ecf0a146f1
Merge branch 'develop' into feat-dropped-frames 2020-08-08 21:26:51 +01:00
Bill Somerville
94d66bc848
Make FST4W scheduling l10n agnostic 2020-08-08 21:25:32 +01:00
Bill Somerville
2e413713a3
Tidy dropped frame status bar message 2020-08-08 19:40:42 +01:00
Joe Taylor
d683cb6b8e Updates to GUI for different QRA66 sequence lengths and submodes. 2020-08-08 14:37:01 -04:00
Bill Somerville
02e19b687f
Status message to report approximate # of dropped Rx audio frames 
This is  a first cut  at this to  evaluate buffer size  adjustments on
supported platforms. A final version might limit status bar reports to
>1000 dropped frames or similar.
 2020-08-08 17:12:48 +01:00
Bill Somerville
a0ceace5b4
User configurable audio device buffer sizes 
Adjusting these may help with  audio drop-outs, particularly on slower
CPU systems or heavily loaded systems. Smaller buffer sizes leave less
margin for  process interruptions,  larger sizes waste  resources that
could impact other processes.
 2020-08-08 16:25:14 +01:00
Joe Taylor
bf38f4416c Modifications to give QRA64 use of longer TR periods and tone-spacing submodes. Noy yet finished, or tested! 2020-08-08 09:14:12 -04:00
Bill Somerville
bf58cd43aa
Improve contrast of coloured widgets in dark style 2020-08-08 13:20:52 +01:00
Bill Somerville
0ba5d7e1bf
More flexibility for QDateTime round/truncate routine 2020-08-07 21:31:48 +01:00
Joe Taylor
7256d70016 QRA66: change NSPS from 1920 to 1800. TxT=85*1800/12000=12.75 s. 2020-08-05 11:06:18 -04:00
Joe Taylor
2bb9566731 In QRA66 mode, make unused widgets invisible. 2020-08-05 09:37:03 -04:00
Bill Somerville
fb8b938ac7
Make FST4 std message generation consistent with other 77-bit modes 2020-08-04 11:43:19 +01:00
Joe Taylor
e32c5b699d Update Wide Graph and plotter.cpp for QRA66. 2020-08-01 13:37:31 -04:00
Joe Taylor
3867c452e6 Changes to GUI to accommodate QRA66. It's basically functional, I think. 2020-08-01 12:13:49 -04:00
Bill Somerville
92cf7b29c2
Merge branch 'develop' into feat-fst280 2020-07-31 15:00:50 +01:00
Bill Somerville
b05bfecb5f
Avoid arithmetic errors when parsing the round-robin current text 2020-07-31 12:39:08 +01:00
Bill Somerville
c2b835c42b
Translatable help windows 2020-07-29 18:44:34 +01:00
Joe Taylor
846b0b6ed8 Fix the problem "Tx did not start in the first Round-Robin sequence when it should have started". 2020-07-29 11:58:28 -04:00
Bill Somerville
0f3fc3d15c
Correct time on beacon mode Tx prints in decodes window 2020-07-27 19:51:56 +01:00
Bill Somerville
6cb72a5f3e
Remove duplicate ALL.TXT Tx report in beacon modes 2020-07-27 19:49:39 +01:00
Bill Somerville
3bf070938b
Enable Tx percentage spin box in WSPR and random FST4W modes 2020-07-27 19:48:13 +01:00
Bill Somerville
2bf8888725
Merge branch 'develop' into feat-fst280 2020-07-27 15:02:44 +01:00
Bill Somerville
080e21f6fc
Remove testing code 2020-07-27 15:01:09 +01:00
Joe Taylor
e96dee4c23 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-27 09:57:02 -04:00
Joe Taylor
236e334e71 *** TEMPORARY *** Allow transmitting FST4-15A and FST4-15B simultaneously. 2020-07-27 09:55:49 -04:00
Bill Somerville
c5248bf116
Merge branch 'develop' into feat-fst280 2020-07-27 13:25:28 +01:00
Bill Somerville
bb927a6115
Handle missing user_hardware on non-Windows systems 2020-07-27 13:13:04 +01:00
Bill Somerville
a2ad0be85b
Use shell to execute user_hardware via PATH 2020-07-27 12:19:47 +01:00
Bill Somerville
b4bbc44d5b
Invoke user_hardware correctly 2020-07-27 00:51:12 +01:00
Bill Somerville
5382ef4a33
Merge branch 'develop' into feat-wspr-user-hardware 2020-07-26 18:03:23 +01:00
Bill Somerville
7bb5a8e009
Merge branch 'develop' into feat-psk-reporter-re-work 2020-07-26 15:52:39 +01:00
Bill Somerville
9c22eb321d
Merge branch 'develop' into feat-fst280 2020-07-26 16:20:11 +01:00
Bill Somerville
2f700265b9
Merge branch 'develop' into feat-fst280 2020-07-26 10:20:55 +01:00
Bill Somerville
7566f3548d
Post FST4W spots to WSPRNet.org 
Includes a re-factoring  of the WSPRNet class,  particularly to handle
direct spot posts as well as via  a file from wsprd. Switched from GET
http request method to POST method.

FST4W spots  post the same information  a WSPR spots except  the drift
field is  always zero (FST4W  has no  drift compensation, so  no drift
figure is calculated by the decoder),  and the mode field reflects the
T/R  period in  minutes.  This  means  FST4W-120A will  be similar  to
WSPR-2, an FST4W-900  will be similar to WSPR-15. I  don't see any way
to  view the  mode field  on  either the  new or  old database  format
queries on WSPRnet,  so it is hard  to tell if that  field is actually
stored.
 2020-07-26 02:58:04 +01:00
Bill Somerville
63b1b0729a
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-26 02:54:04 +01:00
Joe Taylor
ceeafa5bed *** TEMPORARY *** Add a feature to transmit FT8 and FST4 at the same time. 2020-07-25 16:02:42 -04:00
Bill Somerville
4015c5e538
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-24 21:16:52 +01:00
Joe Taylor
dbaffea0cd Allow only TR periods >= 120 s for FST4W. 2020-07-24 11:13:48 -04:00
Bill Somerville
90c1824ffe
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-24 16:01:57 +01:00
Joe Taylor
c802c60afa Allow FST4 to use Split (Rig or Fake it). Set Tx upper freq limit for FST4W to 1600 Hz. 2020-07-24 10:58:10 -04:00
Bill Somerville
29fc0ced19
Revert "Fix double-clicking on a decode line containing fSpread." 
Change superseded.

This reverts commit d9c2a11821.
 2020-07-24 12:46:43 +01:00
Bill Somerville
580dd85a18
Remainder of renames to FST4 2020-07-23 18:51:05 +01:00
Joe Taylor
77a6f8f514 Move blanking from symspec() to fst240_decode(). Do not apply RefSpec corrections to data read from disk. 2020-07-23 10:58:10 -04:00
Bill Somerville
51f692d8d4
Avoid double Tx periods in WSPR modes when changing scheduling basis 2020-07-22 18:01:06 +01:00
Joe Taylor
52643b01e2 Correct the "time to decode" and the "Tune" frequency for FST240 modes. 2020-07-21 14:56:20 -04:00
Joe Taylor
05a1b3bae8 Remove "Also FST240W" from the Decode menu and elswhere in the GUI. 2020-07-21 14:18:55 -04:00
Bill Somerville
5111dcdfa8
Include sub-mode in .WAV file meta-data for FST240 modes 2020-07-21 14:57:44 +01:00
Bill Somerville
09996d4d64
Leave decodes titles intact when changing settings in FST240* modes 2020-07-20 19:33:46 +01:00
Joe Taylor
2e916f995c Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-20 13:59:12 -04:00
Bill Somerville
06b9746619
Make fSpread printing compatible with QSOs 2020-07-20 18:27:29 +01:00
Joe Taylor
d9c2a11821 Fix double-clicking on a decode line containing fSpread. 2020-07-20 11:48:09 -04:00
Bill Somerville
731dfc5c6f
Qt 5.15 compatibility 2020-07-19 21:09:52 +01:00
Joe Taylor
6a4f1fbdf7 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-19 13:21:45 -04:00
Joe Taylor
159b8a97f7 Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used. 2020-07-19 13:20:41 -04:00
Bill Somerville
58fc82e178
Correct standard message generation for FST240 2020-07-19 12:31:10 +01:00
Joe Taylor
7fa7b0dda9 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-18 13:57:08 -04:00
Joe Taylor
4fa9557272 Add end-of-Rx-sequence number of buffers for 900 and 1800 s sequences. 2020-07-18 13:56:19 -04:00
Bill Somerville
43d6eacc4b
Refined stop times 2020-07-18 18:52:09 +01:00
Bill Somerville
60ddd40049
More 15 & 30 minute T.R period updates 2020-07-18 18:50:08 +01:00
Bill Somerville
28c5bfc1bd
Process double-clicks of Fox multi-caller replies correctly 
This change also ignores attempts to double-click other Hound calls.
 2020-07-18 14:47:20 +01:00
Bill Somerville
4e0f1103b6
15 and 30 minute T/R periods for FST240 & FST240W 2020-07-17 23:44:14 +01:00
Bill Somerville
cccb38dbef
Pass hints to fst240sim, genfst240, and packjt77::pack77 on WSPR msgs 
Due to  an ambiguity with  message encodings between 77-bit  QSO modes
and 50-bit  beacon modes with message  types 13.n3 4.0 and  0.6 a hint
needs to be  passed to ensure the right encoding  is emitted. The hint
only  effects  ambiguous messages,  others  will  be encoded  strictly
according to the message content.
 2020-07-17 19:09:21 +01:00
Joe Taylor
64dc6c6a6e Move the red goal post appropriately when FST240 or FSt240W mode is selected. 2020-07-17 12:00:15 -04:00
Bill Somerville
74970acdb7
Align FST240W round-robin scheduling with hours 2020-07-16 14:09:24 +01:00
Bill Somerville
785e9e7924
Undo a change only intended to testing 2020-07-15 14:45:08 +01:00
Joe Taylor
79dbdcca9c Correct a typo. 2020-07-14 14:54:40 -04:00
Joe Taylor
8ff7da3884 FST240W should Tx at audio freq in WSPRfreqSpinBox, not TxFreqSpinBox. 2020-07-14 14:51:40 -04:00
Joe Taylor
c925f6d1cc Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-14 11:43:40 -04:00
Joe Taylor
cbeb81b499 Add LF/MF noise blanker capability for FST240 and FST240W. 2020-07-14 11:27:41 -04:00
Bill Somerville
479dc1113f
Use non-averaging decodes window headings for FST240 2020-07-13 13:27:12 +01:00
Bill Somerville
7118f1ad14
Correct T/R period options for older modes, and correct start times 
Fix up decode window headings.
 2020-07-12 01:38:36 +01:00
Bill Somerville
f77b6bf71a
Only show FST240W T/R period spin box in FST240W mode 2020-07-08 19:37:31 +01:00
Joe Taylor
4de41162a3 Make sure FST240W uses submode A. 2020-07-06 15:36:01 -04:00
Joe Taylor
d4bf73df84 Minor cleanup of RoundRobin control. 2020-07-03 14:17:13 -04:00
Joe Taylor
cbca2f2d80 No band-hopping in FST240W mode. 2020-07-03 10:06:52 -04:00
Joe Taylor
15014685ac Round-robin control should be visible only in FST240W mode. 2020-07-03 10:05:16 -04:00
Joe Taylor
b9e92c416f Implement round-robin scheduling for FST240W mode. 2020-07-03 09:48:01 -04:00
Joe Taylor
5637b229a0 Correct the logic for initializing TRperiod everywhere in FST240W mode. 2020-07-02 16:54:16 -04:00
Joe Taylor
9f3bb0fbb7 Show option "Also FST240W" only in FST240 mode. 2020-07-02 16:20:18 -04:00
Joe Taylor
ab2371a96b Correct the logic for generating "Type 2: messages in FST240W. 2020-07-02 14:57:46 -04:00
Joe Taylor
1a82b9b24d Change the label for decoded text panel in FST240W mode. 2020-07-02 14:11:35 -04:00
Joe Taylor
8b2b1eb378 FST240W should always set RxFreq=1500 and FTol=100. 2020-07-02 14:03:00 -04:00
Joe Taylor
34055d331a Send TRperiod to WideGraph when entering FST240 and FST240W modes. 2020-07-02 13:48:35 -04:00
Joe Taylor
352b497399 Remove a diagnostic print. 2020-07-02 13:43:50 -04:00
Joe Taylor
860224e890 Many changes to make FST240W behave in most ways like WSPR. Needs testing! 2020-07-02 09:39:11 -04:00
Joe Taylor
e63b04bb44 Post FSt240W decodes to PSK Reporter. 2020-07-01 15:46:17 -04:00
Joe Taylor
0608521751 Remove unused references to WSPR_LF. 2020-07-01 15:12:14 -04:00
Joe Taylor
eb1c60e454 Remove several more vestiges of WSPR-LF mode. 2020-07-01 13:17:07 -04:00
Joe Taylor
8903041aa9 Fix the startup value of TRperiod for FST240W mode. 2020-07-01 12:10:42 -04:00
Joe Taylor
f2c3cbf9ac Implement basic functiionality of FST240W in the GUI. 2020-07-01 12:01:47 -04:00
Joe Taylor
ae54c80a54 Here's a start on GUI changes to support FST240W as well as FST240. 2020-06-30 17:14:58 -04:00
Joe Taylor
a44b240192 Change to NSPS=720 for 15-seconf FST240 modes, to allow use for EME. 2020-06-29 17:33:46 -04:00
Joe Taylor
ae6ca148bd Pass mode name to the Modulator. 2020-06-29 14:47:46 -04:00
Joe Taylor
494481fa8a Remove a poisonous but unused line of code. 2020-06-28 20:22:24 -04:00
Joe Taylor
7d094b36bf
Fix the "double-click on AP decode" crash. 2020-06-28 23:23:10 +01:00
Joe Taylor
1610375eee Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-06-28 16:27:23 -04:00
Joe Taylor
5b22280631 Fix the "double-click on AP decode" crash. 2020-06-28 16:26:22 -04:00
Bill Somerville
d5c5a58c7f
Merge branch 'develop' into feat-fst280 2020-06-27 22:14:09 +01:00
Joe Taylor
2b85c70bbc Correct the m_hsymStop values for FST240-300. 2020-06-27 16:58:55 -04:00
Joe Taylor
51447ef1d3 Remove the 1 s offset in wave() array. Fix NSPS for 300 s periods. 2020-06-27 16:24:11 -04:00
Joe Taylor
eb167b11d3 Fix several more GUI parameters for FST240. 2020-06-27 14:13:59 -04:00
Joe Taylor
cd9146e646 Change a few more GUI parameters for the switch from FST280 to FST240. Tx timing probably still needs work. 2020-06-27 13:07:11 -04:00
Steven Franke
390884268c Wholesale change from FST280 to FST240 2020-06-27 08:53:11 -05:00
Bill Somerville
4ee9ba6dba
Merge branch 'develop' into feat-wspr-user-hardware 2020-06-27 00:40:04 +01:00
phl0
6cbc91b653
Include prop mode in ADIF and UDP messages 2020-06-26 23:45:58 +01:00
Bill Somerville
27b4f2939a
More flexible execution of the user's hardware controller 
Updated ways to implement a  user defined hardware controller which is
executed just after band changes during WSPR band hopping operation.

Allows the user_hardware executable to  be located in any directory on
the PATH environment variable. On Windows any file extension listed on
the PATHEXT  environment variable may  be used, the first  match using
PATH and  PATHEXT will  be executed.  On Windows  this is  achieved by
using CMD.EXE with a '/C' command  line flag, i.e. the user's hardware
controller is executed like this:

CMD.EXE /C user_hardware nn

where 'nn' is the new band as an integer in meters.

On non-Windows  systems the  user's executable  will be  run if  it is
found on the  directories specified by the  PATH environment variable,
and it is executable, i.e. it is equivalent to something like:

/bin/sh -c user_hardware nn

where 'nn' is the new band as an integer in meters.

In  all cases  the user_hardware  controller should  exit with  a zero
status, otherwise it have been deemed to have failed. On Windows avoid
an exit status of  one as that is utilized by  CMD.EXE to indicate the
file was not found, which WSJT-X ignores silently.

This change means the prior need to put the user's hardware controller
into   a  WSJT-X   installation  directory   like  /usr/local/bin   or
C:\WSJT\wsjtx\bin is no longer necessary.
 2020-06-26 21:35:29 +01:00
Joe Taylor
9caf3b650c Correct a number of parameters that control FST280 signal duration and timing. 2020-06-25 17:18:48 -04:00
Joe Taylor
1226aacaad Remove the silly C++ puzzle, no longer needed. 2020-06-24 21:25:02 -04:00
Joe Taylor
b006d8381a Code for a C++ puzzle. 2020-06-23 14:21:25 -04:00
Joe Taylor
04e326e75a Change "Enable VHF/UHF/Microwave features" to "Enable VHF and submode features", and remove the popup warning about being on a lower band. 2020-06-22 15:20:41 -04:00
Joe Taylor
1f7d8545f3 Tx line to ALL.TXT should be trimmed(). 2020-06-21 13:49:37 -04:00
Joe Taylor
956aa2dfc5 Call switch_mode() to repopulate bandComboBox after switching to FST280. 2020-06-21 11:27:30 -04:00
Joe Taylor
37b1b7aa6f More of "Single Decode". Also, update m_mode in Wide Graph when switching to FST280. 2020-06-21 10:34:24 -04:00
Bill Somerville
b48b23450d
First iteration of optional TCP/IP client for PSK Reporter 2020-06-21 01:36:30 +01:00
Joe Taylor
f8d7489b4e Fix many odds & ends for merging FST280 properly into the GUI. 2020-06-20 13:47:32 -04:00
Joe Taylor
87b79d0615 OK, we can now transmit in FST280 mode. 2020-06-19 15:02:05 -04:00
Joe Taylor
acd04cc050 Correctly restore FST280 submode on program restart. 2020-06-19 11:43:34 -04:00
Joe Taylor
a4e32807d9 Correct WSJT-X's display of UTC in FST280 decodes for TR < 60 s. 2020-06-19 09:59:12 -04:00
Joe Taylor
1cebbd2cdd Enable decoding of FST280 for other T/R sequence lengths. Needs testing! 2020-06-17 19:28:44 -04:00
Joe Taylor
5aeaf5dc78 Include h=8 and NSS=40 in the FST280 decoder. 2020-06-17 14:17:03 -04:00
Joe Taylor
af9f7b21c0 Starting to implement FST280 decoder. Make Rx sequences behave as desired. 2020-06-17 10:56:18 -04:00
Joe Taylor
0e3ff2688a Further progress toward activating FST280 and FST280W in the GUI. 2020-06-16 16:59:40 -04:00
Joe Taylor
4f802cae84 More work toward implementing GUI features for FST280 and FST280W. 2020-06-16 15:56:15 -04:00
Joe Taylor
725933ddca Initial commit with some GUI features for FST280 and FS280W. 2020-06-16 14:58:08 -04:00
Bill Somerville
9c22b5c3ed
Qt v5.15 compatibility 2020-06-13 16:04:41 +01:00
Joe Taylor
3ad2a4c277 Remove a no-longer-used parameter from calls to lookup(). 2020-06-07 13:32:18 -04:00
Joe Taylor
2973c8dad8 Remove the popup message that "<callsign> was not found in CALL3.TXT". 2020-06-07 13:27:49 -04:00
Joe Taylor
bcfa4526d2 Clear DX Grid after any change in DX Call. (Is this the best way to do it?) 2020-06-07 13:02:27 -04:00
Joe Taylor
f9780927ab Merge branch 'hotfix-2.2.1' of bitbucket.org:k1jt/wsjtx into hotfix-2.2.1 2020-06-04 11:45:23 -04:00
Joe Taylor
05cd8b3462 Improved logic for the way "Lookup" is processed. 2020-06-04 11:32:19 -04:00
Bill Somerville
8833b56d91
Fix issue with 2D spectrum selection in translated UIs 
For completeness  this fixes  the other  occurrence of  widget signals
with text  arguments that are  liable to misbehaviour  with translated
UIs.
 2020-06-03 17:43:27 +01:00
Bill Somerville
37bf0f7356
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0 2020-06-01 16:49:36 +01:00
Bill Somerville
4e9d3e1076
Remove RC expiration and nag message 2020-06-01 16:48:50 +01:00
Joe Taylor
e97164719d Zero the "nDecodes" label if there were no decodes in a sequence. 2020-06-01 11:48:35 -04:00
K9AN
aa4d98b6f1
Fix MSK144 timestamps in ALL.TXT log. 2020-06-01 14:58:44 +01:00
Bill Somerville
2088ad8597
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0 2020-05-26 19:57:43 +01:00
Bill Somerville
65ef7c47f7
Repair regression defect in WSPR power combo box items 2020-05-26 18:00:14 +01:00
Joe Taylor
eeed9b5a2e Don't allow restart with "ISCAT B" mode label unless VHF features are enabled. 2020-05-26 10:28:14 -04:00
Joe Taylor
c7ac74b2dc Correct the restoration of WideGraph, EchoGraph, nd FastGraph after minimization. 2020-05-25 09:35:31 -04:00
Joe Taylor
628eab2cb6 Don't clear the Hold Tx frequency box at unwanted times. 2020-05-23 10:56:17 -04:00
Joe Taylor
8a572eb4a2 Add a mode label color for FT4, and fix a typo. Thanks to Yukio, JG1APX! 2020-05-23 09:05:01 -04:00
Joe Taylor
f62cdb4f37 Fix crash after the message "Double clicking is not supported in ISCAT mode". 2020-05-22 11:56:00 -04:00